Problem detection IOGEAR GUH285 USB 2.0 hub

Similar Questions

• USB 3.0 detected as USB 2.0 hub

  I want to add USB 3.0 ports to my laptop (Dell 1545, running Win7 with all available updates).

  I installed a Renesas ExpressCard with two USB 3.0 ports.  This map features well uses the drivers of Renesas that accompanies it.  The Device Manager lists as a hub USB 3.0, and several external HDs that have USB 3.0 interfaces work fine when plugged in it.

  Now, I need to have more USB 3.0 ports available on this laptop for other equipment.

  To do this, I bought an external USB 3.0 hub generic (unknown manufacturer, 7 switch ports and a power adapter which provides 5V @ 2A power supply by bus).

  No drivers have been provided with the hub, in fact, it has been announced as not requiring any because Win7 had already installed the necessary drivers.

  I plugged the external hub in one of the ports of the ExpressCard and Win7 has recognized, but only as a USB 2.0 hub.  All devices I've tried on the external hub worked OK, but only at USB 2.0 speed.  Device Manager displays the Renesas USB 2.0 external hub as a hub, and it uses the same driver (Renesas v3.0.16.0) as the ExpressCard.  When you try to update the driver, Win7 says it's the best driver available.  I've considered uninstalling the driver of Renesas and tries to install a driver Win7, but I don't know if it works or if it would affect the ExpressCard.

  If anyone has any ideas on this, I would appreciate hearing them.

  Jerry

  Hi Jerry,

  This problem may occur because of conflicts between the towing devices (Renesas ExpressCard and Generic USB 3.0 external hub). It could also be a USB 3.0 adapter generic defective as external devices detect USB 3.0 when it is connected to the ExpressCard of Renesas, in which, they are not connected to the generic adapter.

  To learn more about the issue, I you suggest to disconnect the ExpressCard Renesas and then connect the Generic USB adapter only on the computer. Make sure these devices are getting detected as USB 3.0 device. In addition, when you connect the USB adapter to the expresscard, make sure that you have connected to the USB 3.0, rather than a USB 2.0 port. If the problem persists always, so, you can contact the manufacturer of the Generic USB adapter.

  For reference:

  http://blogs.msdn.com/b/usbcoreblog/archive/2012/06/27/how-to-determine-whether-a-USB-3-0-device-is-operating-at-SuperSpeed.aspx

  Please let us know if you need more help on the issue.

• My Webcam has problems detected by Skype and repeat myself there is another program that uses the webcam. Skype device code 43 usb video.

  My Webcam has problems detected by Skype and repeat myself there is another program that uses the webcam.

  Also got the guests when using Skype as a video device usb was not detected and that it is a code 43.

  Have tried several way sto resolve this problem. CyberLink YouCam HP's running came preloaded on the laptop. The webcam is running when this program is being used separately.

  Inappropriate Feedback Forum of Windows hardware and drivers Forum.

  My Webcam has problems detected by Skype and repeat myself there is another program that uses the webcam.

  Also got the guests when using Skype as a video device usb was not detected and that it is a code 43.

  Have tried several way sto resolve this problem. CyberLink YouCam HP's running came preloaded on the laptop. The webcam is running when this program is being used separately.

  Inappropriate Feedback Forum of Windows hardware and drivers Forum.

  Hello, Aadi467,

  A device driver has notified the operating system that the device failed.

  Run the diagnostic tool of hardware devices do not work or are not detected in Windows on the Microsoft Fix it Center.

  You can also uninstall the software from Cyberlink.  There is a found here download link to reinstall the software after restarting the computer.

  http://h30434.www3.HP.com/T5/notebook-operating-systems-and/lost-my-CyberLink-and-UCAM/TD-p/760367

• to detect if the USB is connected or not in labview

  I want to detect if the USB is connected or not using labview

  Hello

  A simple method you can use to list out the folders on your computer.

  If no key USB is connected to your computer, you will get the name of pen drive.

  First download all the number of readers. Constant than this value if the next time with your USB drive, you get the number of elements is longer then one fixed, then you can say external peripheral is connected with the PC.

  

  Maybe this is not the standard method to detect the device, but it may solve your problem.

  Thanks and greetings

  Himanshu Goyal

• IBM Thinkpad message: 'this machine can run faster with the USB 2.0 hub.

  Original title: Thinkpad USB 2.0 Hub.

  Hello:

  I have an IBM Thinkpad T-21 which is under Ubuntu & Windows xp.  I primarily use Windows XP.  The pop-up that keeps occurring is "this machine can run faster with the USB 2.0 hub.  Can you tell me how to upgrade my USB 2.0 Hub?  Would like to know because I can't sync my Android phone with my computer until I do it. Thank you.

  Are you sure you copied this error message properly?  In other words, he says that the hub could perform better if connected to a USB 2.0 port?  As far as I can determine that the T21 is not come with a USB 2.0 port, even if you connect a USB 2.0 device (for example a hub), the unit will only race as fast as the port allows it.

  What is the brand and model of your terminal?

  It is possible that the message means the opposite (i.e., your computer has a USB 2.0 port, but the hub is only a USB 1.1 device).

  USB 2.0 was introduced in 2001, so if you bought your computer before 2001, it is likely that you use USB 1.1 or 1.0.

  Open the Device Manager (start > run > devmgmt.msc > OK)
  Expand the category of 'USB Bus controllers'.
  If you see the "Enhanced" work for one or more of the listed devices, you have a USB 2.0 port.  If you do not see "Enhanced", you have USB 1.1.

  

  If the problem is that the USB port on the computer is not 2.0, so your only solution is to buy a USB 2.0 PC Card adapter.  Example and example 2
  If the problem is that the hub is not 2.0, then you will need to buy a new hub.

• USB devices connected through a USB 2.0 Hub Stop Responding and are not recognized after Hub reconnects

  Recently, I have this strange problem where if I connect an additional USB device to one of my USB hubs, some of my devices stop working (especially my keyboard and mouse).

  I have two hubs Generic USB connected to my motherboard. My motherboard is an ASUS Rampage II Extreme X 58 who and chips ICH10. It has 4 USB ports in the front and 6 ports on the rear panel (all USB 2.0). I also have a USB 3 controller card that is connected to one of the PCI-E card to the Board of Directors.  I have the following problems:

  1. Connect a USB device to one of my USB hubs (or one of the USB ports on the front panel) causes some of my devices to stop working (especially my keyboard and mouse that are connected via a USB hub). It seems that crashes of USB controller.  If disconnect and reconnect my HUB, windows does not recognize devices connected to this hub.
  2. Now, after the crash, if unplugging the devices connected to the hub and connect it directly to one of the ports on the front or the back of the computer, Windows instantly recognizes!

  Now I'm confused what is the cause of this problem. I had the same computer since the release of the i7 and X 58 and never had this problem (although I don't remember if I used USB hubs right there).

  Why Windows to recognise the devices connected to the hub at the beginning, but not after the crash?

  Why USB devices stop working when I connect to another USB device on my computer?

  And how do I solve this problem?

  AK

  Just a thought by the way.  If the hubs are not powered you can cause the + 5V due to the excessive number of devices not powered up to a point where it causes accidents and able to resume.

  Reduce the number of UN powered can solve this problem,

• Problems of latitude E6530 USB 3.0 Windows 8

  Hello

  The left USB 3.0 on my Latitude E6530 does not work when I connect a USB 3.0 device to it. If I plug in a USB 3.0 in device after Windows starts, it does not recognize anything connected to this port. If I connect a USB 3.0 device to the front port to turn the system, Windows will recognize the device once it starts (it will mount an external hard drive, for example), but will immediately report there is error when loading it. This port usually does not recognize devices USB 2.0 without any problems.

  USB ports are working fine. I can connect USB 3.0 devices in the USB 3.0 port right, and they work. I can plug in devices USB 3.0 to one of the USB 2.0 ports, and they function as devices USB 2.0, as expected.

  I am running Windows 8 Pro.

  It's probably a driver issue or a hardware issue?

  Thank you.

  I have the e6530 of Latitude with the docking station and NONE of my USB 3.0 ports act as 3.0.

  But I'm happy to say that it is corrected now! :)

  I had later "Intel USB 3.0 eXtensible Host Controller Driver" is downloaded from the Dell site and Device Manager reports no problem - but every time I have pluged a USB 3.0 device in any of my "SS" USB 3.0 ports I am greeted with the message "this device could accomplish a lot faster..." "in my systray.  :(

  I downloaded USBTreeView (freeware) and when I connect a device, according to me, it connects to a USB 2.0 hub port.  No 3.0 ports under my "Intel USB 3.0 eXtensible Host Controller Driver" were already used.  :(

  But this thread solved my problem. The problem is the last "Intel USB 3.0 eXtensible Host Controller Driver" driver on the Dell site is almost a year older than the latest in Intel.  Thank you JeanPier - your message has reported me here:
  en.Community.Dell.com/.../20503380

  .. which brings me here: https://downloadcenter.intel.com/Detail_Desc.aspx?DwnldID=21129

  Download the latest version of the host controller, Intel, install it (unzip & run setup.exe), reboot and your problems will be solved...!

  See you soon!

• Satellite M40-307: problem of Audio with USB (pc--> hifi) link

  I have a Toshiba M40 - 307 for a month and a micro stereo system (Philips mc-M570).

  I can link them with USB direct connection to hear the sound from the speakers of Philip pc.

  Only problem: I have several intermittent workers during each session sounds acoustic (movie, game, mp3...)
  I tested it with two other PCs (NEC e DELL) and I didn't have any problem.

  Do you know where the problem may be? USB?
  Thanks for all your replies!

  Hello

  I put t know if this link will help you, because this link contains information on a W2k, but it seems like it might be a Microsoft driver problem.
  http://support.Microsoft.com/default.aspx?scid=KB;%5BLN%5d;817865

  I would recommend to google a bit.

• EX7000 with USB 3.0 Hub

  The EX7000 (Extender/Access Point) has a USB 3.0 port. Can I use ReadyShare installation with a USB and USB printer simultaneously by connecting a USB 3.0 hub to the EX7000?

  Hi declanb,

  Unfortunately, the EX7000 does not work with a USB3.0 Hub that you described.
  It is possible to use the hub with only hard drives. But the USB printer does not work with the hub.

• Event DAQmx API for detecting hot plugged USB device

  Using the DAQmx API calls, is there a way to request a notification to detect when a USB device is connected to the PC?

  I found information on the registration of callbacks for fact, Signal and EveryNSamplesEvent (for example, DAQmxRegisterDoneEvent, DAQmxRegisterSignalEvent and DAQmxRegisterEveryNSamplesEvent) but nothing like 'DAQmxRegisterDevicePluginDetectedEvent '.

  The ends of these wires:

  http://forums.NI.com/NI/board/message?board.ID=250&message.ID=28298&requireLogin=false

  http://forums.NI.com/NI/board/message?board.ID=170&message.ID=245864&query.ID=69454#M245864

  to believe that I'll have to ask for all devices with:

  DAQmxGetSysDevNames (char * data, uInt32 bufferSize);

  but I hope that there is something more automated available.

  Ideas and points appreciated.

  Thank you.

  
  

• XPS 15 (9530, end 2013)-problems of childcare facilities, USB device is disconnected

  Hello

  I got the XPS 15 (9530, end 2013) a few days earlier with widnows 8.1 installed on it and since day 1 I'm running into a weird problem. All my USB devices keeps disconnecting. If its my phone (HTC a M8) or my portable hard drives. I tried several cables and the result is the same.

  I tried to connect all the devices on the different laptops and they work very well except for my laptop. One thing that I know you guys is that if I have my phone connected with the laptop, it charges great however, I am unable to navigate any file on my phone because it keeps disconnecting.

  Any help?

  I could solve my 9530 Dell USB connection/disconnection problem with this combo.

  BIOS A05
  www.sendspace.com/.../pxu1y0
  Use a real lightning cable Apple Original

• Device 4 ports high speed USB 3.0 Hub useful Para PC computer

  Hola amigos

  Al enchufar el 4 ports high speed USB 3.0 Hub useful Para PC computer
  a mi PC, e me lights luz roja, pero no me works, porque me da error code 43 Windows.
  Me pide UN driver y no me lo reconoce.
  Intento find a driver there still no lo he achieved
  Alguien me can help, a packaged good
  MUCHAS gracias
  A greeting

  Hello

  You created this thread in the English version of the Microsoft Community. Please could you click on the globe icon to the world at the bottom left of the screen and then choose your preferred language. Now create your thread again.

  

  If you can't find a suitable language, please go here:

  http://support.Microsoft.com/common/international.aspx

  for other international support options.

  Thank you.

• My computer has problems detecting the USB cords.

  As applications for title, my computer can detect things that I rarely connect into it. When I got to my new iPod touch 3 years ago, my computer it confused for a Kodak camera. I don't remember how I managed to finally recognize my iPod, but it does also with other things that I try to use. As my friend for example hard drive, it works perfectly well on his computer, but when hook us up on mine, my computer gives power to the light, but will not be displayed on my desktop. My keyboard also uses a USB cable, which only works in the USB slots at the front, because in the rear slots, my keyboard only works for about a week before he refuses to work for me and then I have to pass to the slot machines. Is there something wrong with my connection I can fix it?

  Try to buy a USB hub powered (one that plugs into your computer for its USB connection and which has also the power to the USB ports to plug into the extra wall) and see if that helps.  Some computers provide the power to the USB ports and this can cause problems with the devices.

  "Thane Marshall" wrote in the new message: * e-mail address is removed from the privacy... *

  As applications for title, my computer can detect things that I rarely connect into it. When I got to my new iPod touch 3 years ago, my computer it confused for a Kodak camera. I don't remember how I managed to finally recognize my iPod, but it does also with other things that I try to use. As my friend for example hard drive, it works perfectly well on his computer, but when hook us up on mine, my computer gives power to the light, but will not be displayed on my desktop. My keyboard also uses a USB cable, which only works in the USB slots at the front, because in the rear slots, my keyboard only works for about a week before he refuses to work for me and then I have to pass to the slot machines. Is there something wrong with my connection I can fix it?

• Satellite M200 - problem detection USB connect after waking from sleep mode

  Hello. I need help! I'm having trouble with the laptop Satellite M200 (Vista) - after the awakening of the mode standby, none of the things connected to the USB port is detected, even if they worked perfectly before sleep. No mass reader, mouse, iPod is detected - even the SD for ready boost is not detected. Simple plug in and out calls any action (window AutoPlay etc.). Sounds like a BIOS problem but my laptop is completely up-to-date with all drivers and all the rest (of Windows and Toshiba support website). Would appreciate any advice. See you soon.

  > fully up-to-date with all the drivers and everything else
  The latest version of the BIOS too?

• J5 create ethernet & usb 3.0 hub problem - windows 7 Home premium medion 17 "laptop 2011 vintage

  After the stuffing until the installation of this device by NOT following the instructions to the letter, my 3 USB ports only two have been disabled. Even after a clean install of Windows 7, my two 3 USB ports only have the power (can be used to charge devices, etc.), but no capacity USB (USB 2 or 3). Device Manager shows no problems with the USB system devices.

  Thank you
  Philippe

  Hello Philippe,

  To resolve the problem with your USB ports, we recommend that you check this link.

  Keep us informed.

  Kind regards.