PROBLEM DEVICE Microsoft ISATAP adapt root / * ISATAP/0001

Original title : DEVICE, Microsoft ISATAP PROBLEM adapt root / * ISATAP/0001, no IS NOT WORKING.can help you

problem the appliance

Microsoft ISATAP #2 network adapter does not work

Can anyone help please

Thank you

Have a loot at this:
http://support.Microsoft.com/kb/932520

Tags: Windows

Similar Questions

  • I have problems with Microsoft 6to4 adapt reports tv_configmgrerr31 and also microsoft PS/2 mouse bring tv _ configmgrerr24

    Workin

    Symptom: Device is not working properly. Windows cannot load the required device drivers.
    Cause: A device has a configuration issue preventing it from working correctly.
    Details: The device, the Microsoft 6to4 map, reports "tv_ConfigMgrErr31". This device won't be available until the problem is resolved. The Plug and Play ID for this device is ROOT\ * 6TO4MP\0004.
    Resolution: 1. check that the correct driver is installed.
    2. try updating the drivers using Windows Update.
    3. check with the manufacturer for an updated driver.
    4. try to uninstall and reinstall the device using Device Manager.
    Partners: Explanation of generated by Device Manager Error Codes
    Manage devices in Windows
    Symptom: Device is not present, not working not properly, or does not all its drivers installed.
    Cause: A device has a configuration issue preventing it from working correctly.
    Details: The device, Microsoft PS/2 mouse, reports "tv_ConfigMgrErr24". This device won't be available until the problem is resolved. The Plug and Play ID for this device is ACPI\PNP0F03\4-14DDEF44-0.
    Resolution: 1. check that the correct driver is installed.
    2. try updating the drivers using Windows Update.
    3. check with the manufacturer for an updated driver.
    4. try to uninstall and reinstall the device using Device Manager.
    Partners: Explanation of generated by Device Manager Error Codes
    Manage devices in Windows

    Hello

    This error may occur if one or more of the following conditions are met:

    (a) there is a hardware problem or a new driver might be needed.

    (b) devices remain in this State if they have been prepared for removal. After you remove the device, this error disappears.

    Step 1: If the device does not work, make sure that the device is properly connected to your computer. For example, make sure that all cables are correctly installed, or that the cards are properly housed in their locations.

    Step 2: Run the following Microsoft Fix it.

    http://support.Microsoft.com/mats/hardware_device_problems/en-us

  • Problem status Microsoft 6to4 has a driver problem detected other Solutions to adapt Hardware Exchange may not detected

    Map Microsoft 6to4 has a driver problem Detected Other Solutions
    Hardware changes may not have been detected

    Hi M. - Tottimeemoo.

    According to the description of the problem, it seems that you are having problems with "Microsoft 6to4 adapt has a driver problems. I will defintiely help you with this question.

    -Did you do changes on the computer before this problem?
     
    Method 1: I suggest you to see link below and check if it helps.
    On a Windows Vista-based computer or on a Windows Server 2008-based computer, the Microsoft ISATAP map appears with a yellow exclamation mark next to it in Device Manager, and you also receive an error message
     
    Method 2: I also suggest you to uninstall and reinstall the network card and check if that helps.
     

    I hope this helps. Try the above steps and get back to us for assistance. We will be happy to help you.

  • Microsoft 6to4 adapt #5 problem

    I had a Compaq Presario using Windows Vista Home Premium for about four years. All of a sudden, I'm having a problem with my two printers - an HP LaserJet 4000 spits out blank pages and the 932C HPDeskJet prints very slowly. Diagnostics of material that came with the computer tells me I have a problem with Microsoft 6to4 adapt #5 and give me a "code 31".  I ran Microsoft Fix - it and he has successfully performed two operations, but the problem persists. the only difference is that my diagnosis is no longer gives me an alert to the problem and I can't have the exact language of the problem.

    I have used the system restore and restored my system to an earlier date to an automatic update of a device driver package, but it does not solve the problem, although the printers worked fine on the date to which the computer has been restored.

    What should I do now.

    Thank you.

    Hello

    These driver issues should not be a part of the print issue.

    As OEM HP is responsible for the good operation of the printer and their drivers.
    Check with HP Support, their drivers and documentation online and ask in their forums.
    on known issues with these printers.

    Good luck, you need to update or reinstall the latest driver.

    Support HP & drivers
    http://welcome.HP.com/country/us/en/support.html

    Contact HP
    http://welcome.HP.com/country/us/en/contact_us.html

    HP forums
    http://h30434.www3.HP.com/PSG/

    =============================================

    The main issue is probably the drivers, but these can help:

    Add or remove a printer
    http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printer

    Solve printer problems
    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

    Open the printer Troubleshooter
    http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

    Find the manufacturer's Web site
    http://Windows.Microsoft.com/en-us/Windows-Vista/find-a-printer-manufacturers-website

    Find and install printer drivers in Windows 7
    http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

    =============================================================
    =============================================================

    It "may" be something that interferes with the operation of the printer if after running
    updating test pilots a Clean Boot to see if that helps:

    Use the startup clean and other methods to try to determine the cause of and eliminate problems.

    ---------------------------------------------------------------

    References to Vista also apply to Windows 7.

    What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
    on this machine, including those you have uninstalled (they leave leftovers behind which can cause
    strange problems).

    ----------------------------------------------------

    Follow these steps:

    Try these to erase corruption and missing/damaged file system repair or replacement.

    Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

    Enter this at the command prompt - sfc/scannow

    How to fix the system files of Windows 7 with the System File Checker
    http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

    How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
    generates in Windows Vista cbs.log
    http://support.Microsoft.com/kb/928228

    Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

    How to run check disk in Windows 7
    http://www.SevenForums.com/tutorials/433-disk-check.html

    ==========================================

    After the foregoing:

    How to troubleshoot a problem by performing a clean boot in Windows Vista or
    Windows 7

    http://support.Microsoft.com/kb/929135

    Use advanced tools to solve performance problems in Windows 7
    http://www.howtogeek.com/HOWTO/6152/use-advanced-tools-to-troubleshoot-performance-problems-in-Windows-7/

    Problems with the overall speed of the system and performance
    http://support.Microsoft.com/default.aspx/GP/slow_windows_performance?p=1

    How to troubleshoot performance issues in Windows Vista
    http://support.Microsoft.com/kb/950685

    Optimize the performance of Microsoft Windows Vista
    http://support.Microsoft.com/kb/959062
    To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
    Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
    reference (if you have a small box at the bottom left - show for all users, then check that).

    How to change, add or remove startup programs in Windows 7
    http://www.SevenForums.com/tutorials/1401-startup-programs-change.html

    A quick check to see that load method 2 is - using MSCONFIG then put a list of
    those here.
    --------------------------------------------------------------------

    Tools that should help you:

    Process Explorer - free - find out which files, key of registry and other objects processes have opened.
    What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
    each process.
    http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

    Autoruns - free - see what programs are configured to start automatically when you start your system
    and you log in. Autoruns also shows you the full list of registry and file locations where applications can
    Configure auto-start settings.
    http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
    Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
    http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

    There are many excellent free tools from Sysinternals
    http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

    -Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
    When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
    Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
    a program that runs in your Windows startup.
    http://www.NirSoft.NET/utils/what_run_in_startup.html

    There are many excellent free tools to NirSoft
    http://www.NirSoft.NET/utils/index.html

    Window Watcher - free - do you know what is running on your computer? Maybe not. The window
    Watcher says it all, reporting of any window created by running programs, if the window
    is visible or not.
    http://www.KarenWare.com/PowerTools/ptwinwatch.asp

    Many excellent free tools and an excellent newsletter at Karenware
    http://www.KarenWare.com/

    ===========================================

    Think about it an absolute must - manually update your drivers.

    Vista and Windows 7 updated drivers love then here's how update the most important.

    This is my generic how updates of appropriate driver:

    This utility, it is easy see which versions are loaded:

    -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
    For each driver in the list, additional useful information is displayed: load address of the driver,
    Description, version, product name, company that created the driver and more.
    http://www.NirSoft.NET/utils/DriverView.html

    For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
    Control Panel - device - Graphics Manager - note the brand and complete model
    your video card - double - tab of the driver - write version information. Now, click on update
    Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
    Uninstall - REBOOT it will refresh the driver stack.

    Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
    with their own software and drivers and all other main drivers that you have.

    Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
    Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
    BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

    Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
    each installation.

    Always check in the Device Manager - drivers tab to be sure the version you actually install
    presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
    in particular that) so to install a driver - reboot - check that it is installed and repeat as
    necessary.

    Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
    manually by model.

    Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
    http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

    Installation and update of drivers under Windows 7 (updated drivers manually using the methods
    above is preferred so that the latest drivers from the manufacturer of system and device manufacturers are
    found)
    http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

    If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
    Updates, that leaves about Windows updates but it will not install the drivers that will be generally
    older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
    get new manually if you wish.

    Stop Windows 7 to automatically install device drivers
    http://helpdeskgeek.com/Windows-7/stop-Windows-7-from-automatically-installing-device-drivers/

    How to disable automatic driver Installation in Windows 7 / Vista
    http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/

    Turn off Windows Update Device Driver search prompt in Windows 7 / Vista (for professionals,
    Ultimate and Enterprise)
    http://www.AddictiveTips.com/Windows-tips/disable-Windows-Update-device-driver-search-prompt/

    ===========================================

    Refer to these discussions because many more excellent advice however don't forget to check your antivirus
    programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
    first.

    Problems with the overall speed of the system and performance
    http://support.Microsoft.com/GP/slow_windows_performance/en-us

    Performance and Maintenance Tips
    http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125

    Explorer Windows stopped working
    http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

  • I can not install updates KB973593, KB973704, kb974561, KB975960 I get the error code 646 #! In addition, Microsoft IATAP adapter #5 ROOT\ * ISATAP\0007; #7\0008; 9\0011 # device does not not impossible to load the required driver.

    The program that I have problems with, install my updates, they moved it and I get an error code 646 #. I tried to fallow the guide to fixing the problems to solve the problem though, everything I've read and tried did not work! I have plenty of room for my memory and now I'm stuck! In addition, my adapter from microsoft IATAP #5 Root\ ISATAP\0007; Microsoft IATAP adapter #7 Root\ISATAP\0008 and IATAP microsoft adapter 9 # 0011 Root\ISATAP\ these 3 devices not working properly because windows cannot load the driver for this device, and I don't have a clue on what and how to solve this problem at all. "Were the changes that I made, I started using Mozilla Firefox 3.5.3 for my internet conection and I installed two programs (1) speed of Uniblue SN 2009 and (2) Uniblue Registry Booster 2010 both programs are by Uniblue Systems. CTA Neather program worked as they said that if I uninstslled them and after that there about 2 weeks later I noticed that my updates of the program did not work. , or if these device IATAP drivers worked! I tried the system repair and recovery, which also does not solve the problem. I have a Toshiba Satellite A215 laptop 2.00 GB and my OS is; Microsoft Windows Vista Home Premium, Patch level; Service Pack 2. I'd appreciate any help to fix these problems that I'm having with these programs and drivers, I know just enough about computers to really screw things. Please I need a step by step instruction.

    Thank you

    Keith

    I had to disable the "User Account Control" (UAC), which allows you to run as administrator in Vista.  After that I turned it off, all 4 of these updates installed and it doesn't require manual installation.   Follow these steps:

    In the case of Vista view:

    1.) go to start; Control Panel; "User accounts and family safety"; User accounts.
    2.) click on 'Enable user account control or disable' (last point on the page)
    3.) clear the checkbox "Use User Account Control (UAC) to help protect your computer" and click "OK."
    4.) restart the computer, and then run the installation of the system and they work.

    If you are in Classic view:

    1.) go to start; Control Panel; Security Center
    2 screen.) in the "Windows Security Center", go to the last item "User Account Control" and click the button to turn off.

    You can also see the security shield in your Start menu.  You can also access the UAC via this.

    After that the installation of the system have been updated, make sure that you go back and turn the UAC "" and then restart your computer so that unauthorized updates do not occur.   Always try this turn off if install doesn't work.

  • Microsoft ISATAP adapter #28 (device driver software installation problems)

    Hi all:

    Just started getting the following error when I start first in regard to Microsoft ISATAP adapter #28:

    Device driver software was not successfully installed

    Please consult the manufacturer of your device to help get this device installed.

    I'm totally familiar with this device and as a result, I'm not sure what relevance with regard to my OS.  What I need to download and install a special driver manually, or should I just ignore the error message above?  Care of my system:

    CPU:  Intel Core i7 - 4770 K CPU @ 3.50 GHz

    GPU:  EVGA GeForce GTX 770 (last WHQL Logo'd driver installed)

    RAM:  Corsair Vengeance DDR3 1866 MHz (running at 1600 MHz) DRAM Pro

    OS:  Windows 7 Professional 64-bit (6.1, Build 7601) Service Pack 1 (7601.win7sp1_ldr.160408 - 2045)

    Any help would be greatly appreciated.  Thanks in advance!

    Hello

    Peripheral Microsoft ISATAP Inter Site Automatic Tunneling Address Protocol is used to help the transition to an IPv6 infrastructure companies. T he card ISATAP encapsulates IPv6 packets using an IPv4 header. This feature allows the customer to carry IPv6 traffic over an IPv4 infrastructure. This approach allows organizations to migrate slowly to an IPv6 infrastructure without having to spend too much time and financial resources to convert the new infrastructure.

    This means that the Microsoft ISATAP device driver is an update which is specifically designed to connect to the network. This driver is not a requirement for your operating system. It's an extra update for a better network functionality. If your internet connection works fine, then you can ignore this driver. Otherwise, follow the solution below to solve this problem.

    Here are the steps you can try:

    1. follow the steps on this link to update the driver: update a hardware driver that is not working properly.

    2. run the troubleshooting of autopilot: hardware devices do not work or are not detected in Windows.

    3 try to uninstall and reinstall the driver.

    To uninstall:

    1. Click Startand then click Control Panel.
    2. Click hardware and sound.
    3. Click on Device Manager.
    4. Double-click the type of device you want to uninstall.
    5. Right-click on the desired specific device, and then click Uninstall. You can also double-click on the device and then on the driver tab, click Uninstall.
    6. Click OK to complete the uninstall. (Restart your computer so that the changes take effect).

    To reinstall:

    1. Open Windows Update by clicking the Start button. In the search box, type Update, and then in the list of results, click Windows Update.
    2. In the left pane, click check for updates. If there are any available updates, click the links to see more information about each update. Windows Update tells you if an update is important, recommended, or optional. Each type of update might include drivers.
    3. On the Select the updates you want to install page, look for updates for your hardware devices, select the check box for each driver you want to install and then click OK. There could be no available driver updates.
    4. On the Windows Update page, click install updates. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation. Windows Update will tell you if the updates have been installed correctly.

    Let us know how it goes.

    Thank you.

  • I have a mess of error. about microsoft Isatap adapter... plug and play id root\ * Isatap\0002 error tv-configmgrerr31 need help with drivers

    need help with this.is there a link for the drivers. The only changes to my system is a new modom.netgear wireless g54.thank you

    Hello

    (1) what is the complete error message you receive?

    (2) when exactly you get this error message?

    (3) how long have you been faced with this problem?

    You can ignore this error message. This error message does not indicate a problem with the adapter. The adapter will continue to function correctly.

    See the article below

    On a Windows Vista-based computer or on a Windows Server 2008-based computer, the Microsoft ISATAP map appears with a yellow exclamation mark next to it in Device Manager, and you also receive an error message
    http://support.Microsoft.com/kb/932520

  • Norton network adapter "Microsoft ISATAP map2" diagnostic reports works do not correctly-could not load the required device driver (code 31)

    Original title: System reports the NIC does not properly

    Using Vista Home premium on HP pavillion m8075a model RZ555AA-ABG. Norton network adapter "Microsoft ISATAP map2" diagnostic reports works do not correctly-could not load the required device driver (code 31)

    As none of the problems are met with connection network, do I ignore this warning or try to update the driver?

    Hi eucalyptussurfer,

    You can ignore this error message. This error message does not indicate a problem with the adapter. The adapter will continue to function correctly.

    Please see the following article:

    On a Windows Vista-based computer or on a Windows Server 2008-based computer, the Microsoft ISATAP map appears with a yellow exclamation mark next to it in Device Manager, and you also receive an error message

    http://support.Microsoft.com/kb/932520

    Hope this information is useful.

    Jeremy K
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

    If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • Problem with the microsoft ISATAP adapter.

    Original title: DEVICE DISC

    Hello.

    I continue to told to reinstall the legacy player.

    Problem with the microsoft ISATAP card reader. Do not understand this.

    Myrna Hello,
     
    Thanks for choosing the Microsoft forums.
     
    I would like to know some information about the problem so that we can help you further.
     
    1. What is the brand and model of the computer?
    2. are you on ISTAP adapter yellow exclamation?
    3. are you an error code during the installation of the drivers for the adapter ISTAP?
    4. what he invites you to reinstall the device driver?

    I would suggest trying the following methods and check if they work for you.

    Method 1:
    Uninstall and reinstall the device in Device Manager.
    Steps to uninstall the device:
    1. start.
    2. in the search box type run.
    3. in the Run dialog box, type devmgmt.msc and press on enter key.
    4 locate Microsoft ISTAP peripheral adapter.
    5. right click on the device and select uninstall.
    6 restart the computer so that the changes occur.
     
    Pilots should be re-installed automatically after the computer restarts.
     
    Method 2:
    Try to update the latest drivers for the card and check if it helps, here is the link:
    Updated a hardware driver that is not working properly
    http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

    Method 3:

    Automatically get recommended drivers and updates for your hardware
    http://Windows.Microsoft.com/en-us/Windows7/automatically-get-recommended-drivers-and-updates-for-your-hardware

    Hope this information is useful. Please let us know if the problem persists, we will be happy to help you further.
     
    Thank you.

  • Microsoft isatap adapter, get the message "this device cannot start code 10".

    have you tried the driver from the web and update manually update but it States driver is up to date?

    Hi"

    "Description of errors related to the 10 Code that generates the Device Manager in Windows on computers"

    http://support.Microsoft.com/kb/943104

    But it's the information from Microsoft Isatap adapter:

    "On a Windows Vista-based computer or on a computer Windows Server 2008, the Microsoft ISATAP map appears with a yellow exclamation mark next to it in Device Manager, and you also receive an error message"

    http://support.Microsoft.com/kb/932520

    See you soon.

  • 31, Microsoft ISATAP adapter 3 error code does not work. Help!

    I made a report of diagnosis, and this error came.  Unit does not properly.  Windows cannot load the required device (Code 31) drivers > ROOT\ * ISATAP\0004.  I would appreciate help to correct this problem.

    Thank you very much

    Hello

    ·                         http://support.Microsoft.com/kb/932520

    On a Windows Vista-based computer or on a Windows Server 2008-based computer, the Microsoft ISATAP map appears with a yellow exclamation mark next to it in Device Manager, and you also receive an error message

    Windows cannot load driver (Code 31)

    You can ignore this error message. This error message does not indicate a problem with the adapter. The adapter will continue to function correctly.

  • Equium A200 - windows requires a driver for Microsoft ISATAP Adapter

    Hello

    I am a complete newbie at this forum and came looking for help. I recently bought an Equium A200 laptop computer with Vista preinstalled.

    Lately when I start the computer and log in to Windows, I get a message that windows requires a driver for an unknown device and ask for permission to connect to the internet to find the driver concerned. When I click on this option, I get a message saying that the computer has found the driver but has encountered an error trying to install "Microsoft ISA TAP adapter".

    What is it and why should we need for installation? I thought it was quite strange. Any ideas people?

    Any help will be much appreciated.
    J.Sutton

    Hello

    I searched a bit in the Microsoft Knowledge base and discovered that this symptom appears on computers running Windows Vista.

    http://support.Microsoft.com/kb/932520

    Microsoft recommends that ignore this error message. This error message does not indicate a problem with the adapter, computer or any other device. The adapter will continue to function correctly.

    Here are more details;
    + Microsoft ISATAP what inter Site Automatic Tunneling Address Protocol device is used to help the transition to an IPv6 infrastructure companies. Map ISATAP encapsulates IPv6 packets with an IPv4 header. This feature allows the customer to carry IPv6 traffic over an IPv4 infrastructure. This approach allows organizations to migrate slowly to an IPv6 infrastructure without having to spend too much time and financial resources to convert the new infrastructure. +

    Concerning

  • Microsoft isatap adapter

    the isatap map affect the use of anything? It's what should I do is there a yellow exclamation?

    ·                        ISATAP adapter:

    ·

    ·                        http://support.Microsoft.com/kb/932520

    On a Windows Vista-based computer or on a Windows Server 2008-based computer, the Microsoft ISATAP map appears with a yellow exclamation mark next to it in Device Manager, and you also receive an error message

    Windows cannot load driver (Code 31)

    You can ignore this error message. This error message does not indicate a problem with the adapter. The adapter will continue to function correctly.

    See you soon.

    Mick Murphy - Microsoft partner

  • n ° 2 of Microsoft ISATAP adapter of attachment

    In the monthly Norton Anti Virus report it is said that it is a device that is not working and I suggest authourise Norton to 'repair' should I go forward?  the said device is a Microsoft ISATAP Adapter #2

    Hello

    Control Panel - Device Manager - do a right-click on the two - UNINSTALL - REBOOT

    Nothing else to do, Windows will do the rest. And you can ignore errors
    If you wish and on some computers, it will always be there but no problem to be expected.

    On a Windows Vista-based computer or on a Windows Server 2008 computer.
    the Microsoft ISATAP map appears with a yellow exclamation mark next to it in
    Device Manager and you also receive an error message
    http://support.Microsoft.com/kb/932520

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

  • Norton 360 diagnosis reported: Microsoft ISATAP Adapter #2 is malfunctioning and windows cannot load the drivers required - code 31.

    Original title: ISATAP adapt #2 does not properly. How can I solve this problem?

    My Norton 360 diagnostic report detected a hardware device unusable.  The device type is: Microsoft ISATAP Adapter #2 and the device situation mentions that it is working properly and windows cannot load the drivers required - code 31.

    I think that it is also affecting my internet connection and disrupt its speed.

    Can you please help with this question?

    Thank you very much
    Tony

    Hi Tony,.

    You can try reinstalling the device driver and check if it works.
    Uninstall and reinstall the device in Device Manager.
    a. Click Start, type devmgmt.msc and press to enter.
    b. Locate the Microsoft ISATAP Adapter device
    c. right-click on the device and select uninstall
    d. restart the computer and check.

    You can also consult the following article:

    On a Windows Vista-based computer or on a Windows Server 2008-based computer, the Microsoft ISATAP map appears with a yellow exclamation mark next to it in Device Manager, and you also receive an error message
    http://support.Microsoft.com/default.aspx/KB/932520

    Hope this information is useful.

Maybe you are looking for

  • Is there a way to save all my tabs at once and transfer them to another computer?

    No, I'm not talking about having to first laboriously click each tab, bookmarking them, following the instructions to transfer your Favorites file and them by clicking on each bookmark to reopen your tabs. I wonder about a one click way to save all m

  • How to reinstall the Toshiba AC100 Android

    HelloI bought a PC system laptop Toshiba AC100 android 2.1, but android os does not work anymore and I have no restore disk! What should I do to reinstall the android system in my laptop!Thank you very much

  • Installation of Qosmio G35 - V660 Vista - drivers needed!

    I bought the full Windows Vista Edition upgrade. I installed the new update of the BIOS (now at version 1.7), I ran the CreateVistaCDMaker file on the Toshiba site and I downloaded and burned to CD updated for the Toshiba RAID drivers. However, whene

  • IPHONE 6 changes of date and time automatically to 2032

    Hi all I have 6 IPhone which was working fine but all of a sudden the date & time has changed & is showing as February 12, 2032. Due to which my calendar screwed up & none of the applications work as he gives certificate error. Currently it is runnin

  • About discovery M1 B200 UCS blade - Bug found with 1.4(2b)

    Hello I m test some hardware UCS composed to interconnect two 6120xp and two chassis, each chassis have two blades One is B250 M1 in Slot 1 and 2 and the other are B200 M1 in Slot 3 I was at one point running the B200 M1 blade in each chassis without