PROBLEM DRIVE CONNECTION (from Spain)

Similar Questions

• Satellite Z930 - suspend the problem with connected USB hard drive

  Hello

  Owner of a newly acquired Satellite Z930-15 X, I have a few questions/problems:

  1) suspends the work of RAM and good hibernation when there is no external hard drive connected. If there is one is connected, the laptop immediately returns back to suspend state. Is there a solution for this?

  (2) is there a way to selectively disable Bluetooth? Currently, only toggle airplane mode is available (with Fn + F8 or Windows 8 charm bar). This activates / deactivates the Wi - Fi or Bluetooth I think.

  (3) the portable computer is wobbly on reception. I put a bit of thin paper at the corner of a bottom (bottom left) so that it can be stabilized. Apparently, the problem is also mentioned in another thread. Is there a suggestion to fhix this problem?

  Thank you.

  1 / what HARD drive is connected to your laptop? When I use the external 2.5 HARD drive with my Satellite U940 I n t have problem.

  2 / I ve tested it on my machine and I noticed the same thing. When WIFI is disabled software BT is off too. I didn t find a way how to separately control adapter WLAN and BT.

  3 / I think that this issue needs to be clarified with Toshiba service. They must check and perhaps exchange rubbers inside.

• I have a 'C' IDE drive failure I have a SATA drive connected via a PCI-SATA controller card. I want to change from hard disk IDE 'C' on the SATA drive. What are the steps to achieve this?

  Running Windows XP Home, I want to change hard drive as described above.

  As a result, I have a USB hard drive, which I copied the hard drive of the original 'C', before it fails altogether.

  Is it possible to copy this USB drive on my SATA hard drive and have as my primary hard drive?

  Keeping in mind of the SATA hard drive, connected via a PCI-SATA controller card.

  Unless your third sata card supports the option to boot from this map, its not going to work. Not all sata cards are bootable.

• Problem of Smartphones from blackBerry Desktop Manager connection

  I was sync my phone with outlook since I got this phone (8830) about a year and have never had this problem, I connect my phone to the USB port and open Desktop Manager, it says "disconnected, I checked the ports and it is connected, I also deleted and reinstalled the Desktop Manager, but still have the same problem, advice?

  Take a look at this article from RIM:

  http://www.BlackBerry.com/BTSC/KB10144

  Furthermore, if you need to add information to a thread that you have started, I suggest open the thread and clicking on 'Options' in the top right of the post.  You will then have the option to add to your message without having to start a second thread.

  Let us know if this article helps you.

• How to get around the problem of printing from the printer driver Adobe PDF for Notepad instead of a PDF Document?

  How to get around the problem of printing from the printer driver Adobe PDF for Notepad instead of a PDF Document? I tried the tool 'Repair Acrobat Installation' and other problems listed on the forums, but nothing worked. In the Notepad document is the following ' % [ProductName: distill] % X937B6DD4 not found, using the mail service.» X07BB154E not found, by using the messaging service. % [Page: 1] %% % [Page: 2] % % [Page: 3] % % [Page: 4] % % [Page: 5] % X4EEBB81F not found, by using the messaging service. %% [Error: invalidfont;] OffendingCommand: show; ErrorInfo: CharOffsets ss %% [Flushing: rest of work (end of file) will be ignored] %% %% [warning: PostScript error.] No PDF file produced. ] %%."

  The log file indicates that the Distiller cannot find fonts and besides, fonts with very weird names. (These names can often appear when printing from an application, WPF such as Internet Explorer 9, 10 or 11.)

  My best guess is that the problem is with the options set for the PostScript of PDF from Adobe printer driver instance. Exit the application you were initially impression since. Open the Adobe PDF printer Properties . Then click the Advanced tab. Then click on the button default printing . This should produce a significant window default print Adobe PDF is already opened in the Adobe PDF settings tab. On this tab, there is a checkbox to rely on system only fonts; do not use fonts in the document. If this box is checked, uncheck it and press apply , then OK. Then go to the general tab and press the button Preferences giving the window entitled Adobe PDF printing preferences. Again once, look for the box to rely on system only fonts; do not use document fonts. If this box is checked, uncheck it and press apply , then OK. Then back in the Adobe PDF Properties dialog box main, press apply (if it is enabled), and then click OK. Re-enter the app you were original print and try to print again. Let us know if that fixes the problem.

  -Dov

  PS: Unfortunately, rely on fonts system only turned on by default, causing problems for many applications. I always recommend turning it off (i.e., unchecking it)!

• Problems of Smartphones from blackBerry BB Curve 9300 laptop connection

  Hello

  I have problems to connect my BB Curve 9300 to my laptop using the BB Desktop manager. I can't get past the required device password. I tried inputing my BB Curve password, PC, nothing helps. Any thoughts?

  I'm with Orange and the BB OS version is V5.0.0.794.

  The required password has nothing to do with the password for pc, sound purely the password for BB.

  When you initially set the p/o, did you use numbers? Say 1234, may well be "wers" that is to say the letter on the keyboard of BB. Try this.

  If this does not work, it may be, given the small keys you typed the adjacent key by mistake. Obviously, this is going to be a matter of time, but it might be worth trying if you regularly hit a particular key in the error.

• Problem of Smartphones from blackBerry connect to wifi at home

  I have a tomy home wifi connection problem. my blackberry bold 9700 is to find my router a netgear WNDR 3300, which is defined as WPA2 security key. When Itry to connect via WiFi protected Setup with both the PIN generated by the blackberry bold 9700 and push-button put in place. The two underlying methods a falied to you connect to message.  I have wifi checked in the box of connection management.

  What I am doing wrong?

  Steve

  I would advise against using WEP as its garbage and can be cracked very quickly.  I am currently using WPA - PSK which more secure than WEP but not as safe as WPA2.

  Try instead to use WPA.  My Bold 9700 has no problem of connection at all.

  The best solution if YOU use WEP is that if your router can handle multiple SSID, this way you can connect your PC to use WPA2 and Blackberry using WEP.

• Problem of Smartphones from blackBerry connection Curve 8250 to WiFi at home (Dyatek Vigor 2710)

  Problems to connect the newly bought Curve 8250 home tips 2710-no WiFi Dray Tek Vigor gratefully received!

  BB can 'see' home network but will not connect. Its as if BB and the router can "see" each other, but can not will not "talk" to each other. Tried to change to Hotspot and off-grid (Vodafone) BB browser and tried all three connection options (PIN, push button and manual by pre-shared key), but all expire without any link with.

  Took a look at other assignments, but nobody seems to have had this problem.

  Help!

  Denis

  If your 802.11 running * N * on your router, this could cause problems. The BB model you are using doesn't support 802.11 * G * and 802. 11 * B *.

  One thing I do to try to eliminate this problem is to check your settings wireless LAN of your router by logging in the cpanel. If it tells you are currently using tape N then try to pass it to one of the compatible bands above and see if your phone makes a connection to UMA. If this does not resolve the problem, by all means, let me know and we can explore other avenues.

• Can't see the new external hard drive connected to my iMac for my MacBook?

  Hi all

  I connected a new 8 TB external Seagate HD to my iMac and I try to see it from my MacBook Air and MacBook to my partner.

  It is properly formatted (journaled MacOS and GUID) and have not had any problems with the 3 TB drive, that we were connected before.

  File sharing on and everything seems normal.

  For the life of me, I can't drive/partitions from the MacBook, although he is able to see the old drive.

  Any help appreciated.

  Thank you

  Hey Dr.Tobyk,

  Not being not able to see a new disk on your network, when you can still see the old drive would make me crazy. I use sharing like this every day and you know how convenient it can be.

  I always look at how a new drive to share implementation is always How to connect with the file sharing on your Mac this article helps me to solve the problems which arise.

  Things I always look how implementation of a new drive, that it is in the list of shared folders and check that user boxes has the correct user with the correct access.

  See you soon

• E3200 and Buffalo NAS drive connection

  I recently upgraded to the E3200 of an older linksys router linksys wireless router.  I have a Buffalo NAS drive connected to one of the ethernet ports.  When I access the NAS from my computer (wireless connection), it is extremely slow to load the icons of directories and files not to mention to recover a file.  I mainly photos/music etc on the NAS.   Internet connection is fine and I don't have this problem with older router.

  Not sure if I need to tweak the settings of the wireless router or if it is something with Windows 7 (although my computer has not changed, only the router).

  Suggestions?  Thanks in advance.

  Try these troubleshooting steps:

  [A] with the help of the Cisco Connect software (if at all, you have installed the router using this software)

  1] open the software and go to the option that says "settings of the router.

  [2] then click on the option that says 'Advanced settings', which will take you to the router configuration page.

  [3] on the same set up page reduce the MTU size to 1400 auto.

  [4] then click on disable SPI Firewall Protection Security tab, uncheck the box filter anonymous Internet requests...

  [B] If you have not installed Cisco connect then you can connect to the router's user interface using its default IP address in the browser which is 192.168.1.1 and enter "admin" as password empty username field. This will take to the web interface of the router and then follow the steps as indicated above to make the changes.

  Then check the status of speed...

• Problem Driver network Dell Latitude E5570 with MDT

  We received a lot of laptops Dell Latitude E5570. I want to install a picture on them, using MDT. I downloaded the file CAB for Windows 7, A02 08/03/16. Added to the output of the drivers on MDT as usual, then updated the deployment share.

  When you try to start the installation, I get an error in the wizard. Connect to the deployment share could not be established. The following network device has not been installed, PCIVEN_8086 & DEV_156F & SUBSYS_06DF1028 & REV_21

  I tried download the drivers for the network card on the Intel site and their import. This time, I can access the task sequence list. There's nothing wrong with the first part of the installation. When it comes to complete the installation, I get the same error of Assistant on the network device.

  Any suggestions would be welcome

  I finally got mine work. Drivers is must always use a combination of the taxi driver from Dell and Intel driver. If the version 3 of the TAXI driver who has been published will solve the problem?

  I try to import the driver directly from intel first as well as the cab file and see if it works. This is the link I used: downloadcenter.intel.com/.../Intel-Ethernet-Adapters-Connections-CD

  In the end, I think that my question was due to the SSD and the fact that I tried to start Win 7 x 86.

  After reading a couple of different forums, it seems new SSD require UEFi start to run, which is not supported in Windows 7 x 86. I tried an image with Win 7 x 64 and it worked the first time.

• Password protect an external hard drive connected to Time Capsule

  I have a WD passport external hard drive connected to my time capsule, so my wife and I can easily share files. I have the external hard drive connected through the locked time capsules WiFi network so someone in the House can not access however if they walked the time capsule and not plugged in the external hard drive they could walk away with it. When I try to password protect external hard drive then time capsule may not recognise, and so I can't use it as an external hard drive that is shared. No one knows how, to password protect the external hard drive connected to the time capsule as if someone physically stole the external hard drive it would be locked, but have yet still recognizable by Time Capsule when I plugged?

  Hope that makes sense.

  The only way to do is to encrypt the files on the computer.

  And you both use the same password. Unfortunately, this probably means that you can not share files directly... The TC is not a SIN... never, it was designed for this purpose so there no controls to help admin file sharing.

  If you create a DMG file on WD drive that encrypt you and you can copy files to and from... but only one at a time.

  Another method would be to use a specific software... Watch chronosync.

  http://www.econtechnologies.com/Chronosync/guide-sync-with-disk-image.html

  I don't him have not run in this configuration... so, you have to experiment if it manages what you want.

  I think that there will always be limitations on concurrent access from multiple computers.

• Hello. I created a folder music on my external hard drive connected to my asus router.  I can now access the music through my media library.  How can I change the folder when I make new purchases to iTunes easily without doing it one by one

  I created a folder music on an external hard drive connected to my asus router.  I copied my music from my iTunes library in this folder access and can now my kodi media network.  How I updated the folder when I do new iTunes purchase without having to do it one by one thanks

  You can use a backup tool that updates only modified files.  You don't say what kind of computer you use.

  ITunes is actively using media on the external hard drive so you can replace it. Simply copy the media to one other player does not have iTunes it use it.  iTunes is probably still using media to your internal drive.

• "We have problems to connect to the download server.

  I tried to download any type of update of Skype from my Skype upward and itself deleted my Windows 10 for no reason. Whenever I have try and install the program Skype, after clicking on the first two buttons of installation for preparation, I get this message: 'we have problems to connect to the download server. The only option is to 'download' again. And continues to be the same thing. What is happening and how to fix this?

  Try this download link (currently Skype version 7.16.32.102)

  http://www.Skype.com/go/getskype-MSI

• Time Machine backup to external drive connected to the TimeCapsule

  I have a 3 TB TimeCapsule, that contains the my iMac TimeMachine backup. So far so good.

  Now, I would like to connect an external drive to the TimeCapsule via the USB port to allow access to this drive of my iMac as well as other computers on my network. I would like to than the external to include in my Time Machine backup drive. Is it possible - by accepting that the backup of obviously only runs when the Mac is on? If this isn't the case, other methods of backup to an external drive, connected to the TimeCapsule, may be recommended?

  You can do it. Time Machine it will support up to a separate folder on your backup disk. Don't forget to remove it from the exclusions list in Time Machine preferences. I don't know if others cannot see the drive connected to your computer is turned off. They may be able to mount the drive on their computer as you do on yours. Try it because I could be wrong on this matter.