Problem full boot disk

Similar Questions

• Full boot disk. MacBook Pro cannot start.

  Small prob startup disk is full. Have you tried following suggestions: shift-command-v.  Also now powere button for 10 seconds. Not know how to reset the smc or whatever it is. System operating sys is 10.6.8 2008 mb pro model has intel core duo HD Memory 2 gb 667 mhz ddr2 sdram.  It lights up with the noise, the screen goes gray, apple rises, then begins to progress indicator. Wheels turn... then becomes black and goes off without any noise. I supported, but not for a month. I don't have the start-up of the disks that came w. Mac like it was a Ghent-me-down.  Is there hope if it goes once again to go down all my latest photos?

  Hello

  Follow the suggestions http://osxdaily.com/2016/02/06/mac-startup-disk-almost-full-message-fix/

• El capitan will not open - full boot disk

  Hello

  My Macbook Pro 2015 will not open. I have El Capitan on it.

  The last time it was open, I was copying large files on it. Did not notice that the free space was not so. Thus, change some time to copy files, the screen freezes and I had to stop it by pressing the button of closing for a period of time.

  Now it wonder pass and then takes over to 100% and stay like that. I keep it like that for 1 and a half hour and still the same.

  I have fact/cheque:

  1 safe mode - does not work. I don't know why, and I'm wright.

  2 disk utility (cmd + R) - say that the mac player seems to be ok (first aid) and shows me zero free Ko. Think that's the reason why it does not start.

  3 terminal. Find my user >. Trash and delete the content thereof (rm - rf ~ /.) Trashes) and checked it was empty after. After restarting the same.

  4 El Capitan of loading of the external drive. Can't see hidden files (.) (Trash) even when I put the command in the terminal. I was able to remove the other files with this, which appeared on the external drive of the El capitan Trash and delete them from there to check the mac, 100 GB of free drive. Reboot and always the same time. Open Cmd + R-> disk utility again: zero free Ko. Why?

  Like most computers Mac needs space to run in, so boot from an external drive and delete (or move) at least 15 GB of your Mac. This should be enough to start, do not fill it up again

• defects of memory - full boot disk but nothing to delete?

  2.53 GB free of 59.44 Go and get "Startup disk is almost full."

  43,62 GB OTHERS

  11.26 GB APPS

  PHOTOS OF 1.61 GB

  310,3 MB AUDIO

  MOVIES OF 97.8 MB

  BACKUPS OF 8.7 MB

  I can't find anyway to know what OTHER there or even remove it.

  Even after the apple a few years to wipe it / reformat - it was always there!

  I tried to repair disk and it gets stuck trying to make the temporary file...

  I was wondering if some file sharing site has somehow the memory used?

  Took my children accessing these sites and since then he stopped.

  I just want to clear everything and start over. How to do?

  Wipe the disc is a "radical" solution and won't really solve anything, since you will likely be the same situation again. First of all, as you've noticed Apple has scored some specific types of files: music, applications, Photos, etc. Another is simply everything that doesn't fit in any of the specific categories. Secondly, Spotlight, the technology that keeps track of the files, what types of files they are and so on has a bug which too often results in the limelight file damage index. Once this happens files lose their designation. This makes it look as 'Other' takes over the computer.

  If you prefer to deal with simple rinse and repeat that you need to do two things: figure 1) on what can be deleted or moved from the computer to an external hard drive and 2) re-indexing Spotlight in order to get a better idea specifies what is on the computer.

  OmniDiskSweeper is a free program that will be added to your hard drive and allow you to see what is on it. Note 1: never remove anything from the library or system files - they contain vital operating system files. The record library of your disk space is also holds important files. Remove the (s) wrong can mess up your account, but not the computer. Don't erase anything about him unless you know what you're doing. Note 2 - you can delete several files of document and even applications without freeing more space. Larger files are music, video and photos. Note 3: your computer has a hard drive that is incredibly small and requires discipline to prevent fill. You can consider replacing the SSD with greater. Check out OWC for availability, prices and videos showing how to do the upgrade.

  Here's how to reindex Spotlight: rebuild the index on your Mac - Apple Support Spotlight

• Mac Book Air boot disk is full

  My Mac Book Air continuously shows a message that the boot disk is full.  I checked and I don't have a lot of pictures or files, I use iCloud for almost everything and so I don't know what I should delete to free up space.  Has anyone else had a similar message?

  In case you're not already aware, if you have the Apple menu > System Preferences > iCloud > iCloud drive turned on, everything you add to iCloud reader will have a local copy on your Mac.

  The following may help if it is anything other than iCloud drive:

  The tip on the location of the files as the rest of the following may be useful: http://osxdaily.com/2016/02/06/mac-startup-disk-almost-full-message-fix/

  Omni drive Sweeper can also help identify the files:

  https://www.OmniGroup.com/more

  In addition, to find large files: https://support.apple.com/kb/PH22193

• Dual Boot with windows XP Pro with 2 HARD drive, error on secondary windows install: "Windows did not start because of a configuration of the disk of the computer problem. Could not read the selected boot disk. Check boot path and disk hardware... »

  Hi, I recently bought a new Hitachi 1 TB internal hard drive. I wanted to do a clean install on the new drive (d), be able to dual boot my computer and leave my old 300 GB disk (C :) as the primary windows installation. After physically installing the new HARD drive, I noticed that "new hardware found" and the the brand name flashed in the bottom right corner. I thought I'd see the new hard drive in my computer, but I did not. I initialized the new HARD drive with the computer management window (right click on my computer - manage) and I also formatted in NTFS (I had to change my printer hard drive letter to assign the new HARD drive with the letter D, but I've made other changes after this step). Now, I could see and use in my main windows on the C: installation. I then installed a windows new copy XP pro with the installation CD I got for my C: but on the D: (Note: I have a Dell computer (and the Dell reinstallation CD) and my current version of windows has SP3 while the installation CD is only SP2) (I also reformatted my HARD drive during the installation of windows to NTFS)

  Now when I try to start on installing the new on my D: I get "Windows did not start because of a configuration of the disk of the computer problem. Could not read the selected boot disk. Check startup disk and hardware access path. "and another line saying to refer to manuals HARD drive and windows.

  My Boot.ini file at this time was:

  [boot loader]
  Timeout = 5
  default = multi (0) disk (0) rdisk (0) partition (2) \WINDOWS
  [operating systems]
  "multi (0) disk (0) rdisk (0) partition (2) \WINDOWS="Microsoft Windows XP Professional "/ noexecute = optin/fastdetect
  "signature (ac516a5c) disk (0) rdisk (0) partition (1) \WINDOWS="Microsoft Windows XP Professional own "/ noexecute = optin/fastdetect

  I looked towards the top of this help page, but for now I'm unlucky:

  http://support.Microsoft.com/kb/314477

  (The next steps I took by throwing from the Windows CD and go into the repair console)

  I tried to use the bootcfg /rebuild but the line to boot.ini for my secondary HARD drive still does not work.

  He gave me something like:

  [boot loader]
  Timeout = 5
  default = multi (0) disk (0) rdisk (0) partition (2) \WINDOWS
  [operating systems]
  "multi (0) disk (0) rdisk (0) partition (2) \WINDOWS="Microsoft Windows XP Professional "/ noexecute = optin/fastdetect
  "signature (ac516a5c) disk (0) rdisk (1) partition (1) \WINDOWS="Microsoft Windows XP Professional own "/ noexecute = optin/fastdetect

  I also tried to change the signature() to multi (0), but it did not work. (or try almost all possible permutations of disk() and rdisk() partition() 0 to 2).

  I also tried to use expand F(dvd-drive):\i386\ntkrnlmp(I_have_a_duo-core).ex_ D:\windows\system32\ntoskrnl.exe and a few other combinations, but I when I login as D:\windows simply, it fails to extend with a message like "could not develop" or C:\windows I get "restricted access".

  I have not yet tried CHKDSK/r, but since I did a clean install on a newly formatted drive... I don't think it would work.

  I've also marked the partition on the D: as active (in computer management), but it did not help me.

  I've done a first installation of windows repair, strangely, I couldn't fix this one... Still does not work...

  My default windows installation yet works very well & I see that windows has been installed on the D: but I'm ideas from how to operate the dual-boot, can someone throw me a BONE on what to do?

  Maybe try to do something with the Boot Manager (whatever it is?) Create a new partition and use it as a boot manager? I don't really want to do this, because if I made a mistake I will be unable to use my computer and dual boot should work without going through all this trouble... But I found this page: http://technet.microsoft.com/fr-fr/library/ee829686%28WS.10%29.aspx

  Could a clean install two HDD help? I hope I won't have to do...

  Someone has an idea?

  PS: I'm not such an advanced user so I need a solution step by step, thanks!

  Edit: I also noted that I can't see my new HARD drive in my BIOS... weird... SATA-0 is my old drive HARD 1 and 2 are my dvd 3-5 readers are 'off' and it doesn't seem to be anything that it is plugged in. I also have 4 bays for internal HARD disks. Now, 2 are busy.

  Edit2: I looked inside my case and enabled the good Sata in the Bios after a reboot it detected the drive correctly. Dual boot doesn't always work well... The fact that it was disable in the BIOS while I was installing the new HARD drive could change anything? Hmm...

  In case I wasn't clear enough: I had a windows XP Pro installed on my C:, bought a new hard drive and installed the same copy of windows on it (d). I think that should allow me to double boot between the two installs different. Even if for some reason I can't boot from one on my D:. Andrew, I do not understand why you so far physically disconnect the other drive, the point of the whole operation is to build a boot.ini file so that the BIOS knows that it y facilities 2 windows and you allow to choose (and not have conflicting problems between the 2 systems), someone correct me if I'm wrong? "Expand" the part of my first post made reference to one of the solutions provided by Microsoft in the first link that I have included in my previous post (but I can't seem to work).

  In addition, it is the procedure that I followed: http://www.ehow.com/how_5950826_boot-two-different-hard-drives.html

  (except I've had the first installation already done).

  Andrew "also, once a new hd is plugged on the pc & running, most of the BIOS will place (them) as 1st priority hd, set the BIOS to do this", you mean that by installing separately from windows on each unit when the other is not plugged in, I could choose what disk to start from defining their priority in the BIOS once they are all plugged back? It's too tedious (as I intend to move frequently between the 2 installs) and requires a computer to other users of the lack of computer knowledge. Unfortunately, it is not a viable option.

  EDIT: I DID IT! Hmmm... Well, I double checked in the recovery console, the path of the new HARD drive with the arc command Scan. Tried to start again with the MULTI (0) in my boot.ini and it worked... I also had my windows install CD in. Maybe that is why I could not start, windows needs the CD to complete the installation? Weird, I don't know what I did to the difficulty it... but hey, it works! Thanks for your ideas guys!

• Problem getting all the portable versions of firefox from 28 to start without error xpcom in DO PE 48 boot disk place at the start of the P-Start

  I built an emergency recovery boot disk using MAKE PE3 - 48 and P Start to enable the use of portable programs after booting into the recovery environment. I have used with success of Firefox Portable till and including version 28.

  All portable versions since then up to the last 35 Version will not start. All display the error could not load XPCOM.

  These same portable versions of Firefox, however, will begin in the normal environment of Windows 7 Ultimate on all my computers, however, in the environment of DOING PE 3, on the same device, they will not.

  You can ask about it in the support forum for Firefox Portable here:
  http://PortableApps.com/forums/support/firefox_portable

  Firefox Portable is a 3rd party application, not published by Mozilla. I installed it myself for dealing with changes in it and how it differs from the official version of Mozilla, but don't know enough about it or something DO PE 48 to be able to help you.

• Satellite Pro 430 CDT - boot disk problems

  I have a toshiba satellite pro 430 cdt which I am trying to re - install windows 95 (I have win 95 on cd) on with no luck at the moment.

  I downloaded the two files from bootdisk from www.bootdisk.com, win95a and win95b, but have neither the right cd rom driver, so then I got put www.driverguide.com driver this driver on startup disk and change the config file to use the correct driver and I always get the message that no driver for cd rom drive was found.

  I don't know if the cd rom drive no longer works, even if the green light on the side flashes when you eject the disc that told me that things seem ok (maybe wrong here however). I have the cd rom plugged into the Bay on the right side of the machine (internal) and drive in the caddy it is connected on the left side of the machine (external) and even if I swap them on the cd rom drive does not work but the floppy drive works in two ways. If the connector edge on the cd rom drive doesn't work properly or the drive itself is shot.

  If I remember correctly when the boot disk works correctly it should give you 3 or 4 options (don't remember that it was a long time ago I finally did, and I did not work boot disc, DOH!), which one should be something like, "install windows with the cd rom support" or something like that.

  Once I get this I am ok I have win 95 on cd, and it is quite simple installation there from there that I built a few pc and installed different versions of windows with no true front hassels.

  Did he have the same machine as me (uk version) and able to compress all the files on a boot floppy from win 95 work and e-mail it to me?

  Or just files autoexec.bat and config.sys are all I really need (as long as they work those). Anyone know anywhere I can get my hands on one set of diskettes originally supplied with the machine that I seem to have lost mine, I think there were two or three players but no windows cd, I bought my copy (legit) from a computer fair years.

  Will provide you with my e-mail address later if necessary.

  Thanx

  Steve Jones

  Hi Steve

  I found the information that the device was shipped with 10 x player XM - 1502-B.

  Check this box:
  http://www.cdrom-drivers.com/companies/1066.htm

  There you can find a lot of drivers for different units. But maybe it's something wrong with the occupation of s PIN. In addition, you can ask the service partner for advice.

  Good bye

• Z220 CMT: firmware Win 8 factory 7 and install new boot disks (RAID 1)

  My Z220 came with the copy of Win 7 Pro/64-bit factory-loaded, lowered to win 8. The supplied HD is just a Seagate 500 MB to 6 MB/s SATA drive.

  I want to change my boot disks for a pair of WD series RE 1 TB disks in a RAID1 configuration.

  The 220 came with a series of restore disks: disks of recovery system 1,2 and 3 for Win 7 and a DVD of recovery Driver for WIn7 and WIn8, as long as the DVD of the operating system - Windows 8 Pro.

  So, if I install the pair of RAID array using the Intel RAID software, can I then use CD Win7 game to restore the Win7 system to the new RAID array? Is there a potential problem of activation here?

  My other idea was to use Clonezilla to clone the current Win7 system on the RAID array, but I don't know if it will work, as the discs in question are not the same...

  If you look at your partitions on the disk HP of the computer/manage/storage/disk management you should see a hidden partition which you can draw the active OS itself and also to make an installation USB or CD/DVD set.  But you already have those in hand, I believe.

  The restore thing can be confusing.  What I would do, is get a stunt or set of disks drive and start experimenting.  One of the disks is an "Activator" disc which you start with, and it gives you instructions as you go along with a clean installation, including installation RAID or simple installation on hard/SSD options.  Just keep your 500 GB out of the workstation and work with the readers of stunt.  For those, I liked the 80 GB WD Velociraptors... two correspondent off eBay are cheap, and they are quick to reformat/load/erase.  It will start to make sense fairly quickly.  For RAID works, you can experiment on 2 160 GB drives, but a full install of W7 with Office 2007 is less than 45 GB.  You just start from this first optical disc and start digging.

  The thing about the COA... When you perform a clean discs HP restore, as if your HP hard drive has failed, the process puts on a HP OEM COA serial number that is different from what is on your COA sticker.  For example, you can clone a facility and it will work on an another Z220 CMT without activation.  It checks only the BIOS of the workstation to make sure that it is a legal installation.  If you try the same thing with a W7Pro64 OEM System Builder build the clone will work but will recognize that this isn't the same job that it has been installed on original and you give a few days to feed another series of COA number.

  A clone must come from the installation of restore HP OEM with the internal controls of HP and OEM HP serial number to make it work on another box without activation problems.  Stick to right side of things and you'll be fine.

• Mac 27 inch cant find HD boot disk won't boot

  My imac starts with chime bar and apple but takes almost a day to get to the user login page and when that happens it goes no further. I can't find my HD drive icon start-up and im not sure if I still have el capitan os x 10.0 do not know what is happening? I have the 4 TB WD dou upward by car and do not want to lose all my logic projects so I guess I need boot disk and os x help if someone can thanks yall

  Your machine likely has a failed hard drive or some other problem. Please, take it to your local Apple Store or the service provider authorized Apple to be looked at.

• make a boot disk

  I'm doing a startup disk, a boot disk.  I have several disks usb, 1, 2, 3 TB, or I could use a flash drive, if he stands on a 32 GB flash drive, that is.  I suppose that it wouldn't be as people online sell everywhere to help people who find it difficult to install el crapitan.  Many of them must be as one of the amazon sellers showed 4000 available: 39 left.  Ouch.  I can't el crapitan to install to save my life.  It crashes, never works.  The importance of the support of apple is suggesting that I say 'Yes' when I start, as I have to "accept" the agreement from apple before, even though I told her is not the problem, she sent me a book of instruction page three on how to start el crapitan and to proceed with the installation, you have to say yes, and you will need to acceptt their agreement.  Yes, I did.  no problem with this part.  but it's that the things she and the two girls before and both were subsequently in the same boat.  Mr President, let me send you instructions on how to download it.  "No, I say, I did.  Do you really think someone is struggling to push a button that says "download?  Obviously, Yes. because she sent me instructions, once again, no joke, on how to push the button so he can 'download '.  Complete with how to do it with your finger and how if you have a plug in the mouse, with a separate section if you have a wireless mouse.  Hell me silly.

  O.K. HELP!  El CRAPITAN won't complete the upgrade process.  Please tell me if it takes normally 8 to 12 hours on your systems.  I guess he was hanged and killed the process.  rebooted, retried... same thing.  anything after 12 hours or more.  Yes, I used the pad on my Apple Macbook Air 11 '', i7, 4 GB ram, 250 GB SSD.  I do not use a wireless mouse.  I have not used a wireless mouse.  I did no harm to press download, and after I did, it succeeded because it was changed to read "DOWNLOAD"... "If there are employees of apple here who have not... so much worse.  If you work for Apple, leave, just freaking leave I have no more time or patience for you.  Just trust me the O.K. FREAKING the COMPLETE DOWNLOAD.  O.K.?  Because it gives an error message when I tried to install from the same disk.  Then I tried to install it from a second disc, a key USB WD 3 TB.  Seems to hang.  (Tell me whether I should WAIT WAIT 15 HOURS OR MORE for the thing to check.)  Anyway, it does not work.  So I found a TON of entries, some are already selling thousands of them, for small usb thumb drives flash of various sizes, called the STARTUP disk, so...

  I guess el Crapitan must be installed on a PARTITION AMORCABLE where in the CAR.  Something that it would have been so freaking sweet if they would have SAID THAT SOMEWHERE some TIME no matter WHEN IN THE DESCRIPTION OF THE PACKAGE ON THEIR SITE.  OK, so I think I ned a diskette formatted in some way.  Me color cheap, stupid, whatever.  But rather than buy on online at Amazon, I thought how hard can it be?  I can do it.  Big mistake.  Create a disc a disc of starting, or bootable used to be in the old days an easy as pie thing...

  However the Apple support site, helps him terminal programs, man pages diskutil, the program Apple accessories disk utility supplies, NOT HAVING ANY HELP DRIVE of FILES THAT BOOK REFERENCE, START UP DISK or any combination of the same, you know... How can you, how can you do a... whatever.  nothing. isn't there.  And here, in the consumer help pages.  No messages that are either.

  It's not rocket science.  It can be done.  How to make a boot disk?  How to format a disk a bootable floppy.  or a book drive, no matter what.

  And if y ' All are Apple support staff, and if you tell me that I pressed the wrong download button or I pulled the single button in the wrong order... I take my mac to a shooting range and shooting it be shot to pieces and displaying it on iTunes.  And never, never, ever, buy a mac or an apple anything.  , so, this whole experience has soured me I could never do that either.

  What do you know?

  <Create a bootable OS x - Apple support Installer>

  <http://osxdaily.com/2015/09/30/create-os-x-el-capitan-boot-install-drive/>

• ENVY h8 - 1520t: error: no boot disk was detected or drive failed.

  Yesterday, when I turned on my computer, it was really slow and I could not open any programs. Then it went all blue and white. When I rebooted, I see "control the presence of .media, media, start the PC via ipv6, then error: no boot disk was detected or the disc has failed." I tried to hit f11, but it fills the entire screen with the error message. He died or hope?

  Looks like your hard drive has failed.

  You need to maybe replace the disk and reinstall Windows.

  Please use these instructions to test your hard drive.

  * Works even if your PC will not boot to Windows.

  If you found my answer helpful please say thank you by clicking on the icon of the thumb. If my answer has solved your problem, please mark it as accepted Solution. Thank you!

• L20-101 problem with bootable disks

  Hello!

  I have a problem with bootable discs. I try two disks bootable, that have been successfully tested before in other systems, but my L20-101 does not start with them.
  After the startscreen, there is just a white screen.

  is this a general problem with the L20-101? the installation of the update of the bios to version 1.80 had no effect.

  does anyone have a solution?
  Thank you

  Hello

  The boot disks you are using?
  Have you tried to start with other drives for example with the delivered Toshiba Recovery CD or the original CD of Microsoft Windows?
  It would be very interesting to know if there is a problem disc or unit.
  Please check if pressing the C key allows you to boot from the drive.

  Good bye

• 23 - k027c: ERROR: no boot disk was detected or drive failed

  Hello!

  My computer

  HP Envy tilt 23-k027c TouchSmart all-in-One desktop PC (energy star)

  These latest OS Windows 10 (update of Windows 8, which was preinstalled on the computer at the time of the purchase in December 2013)

  Intel (r) Core (TM) 15-457OT CPU @ 2.90 GHz

  Processor speed 2900 MHz

  A few days ago it started showing blue screens of death with a PAGE_FAULT_in_NONPAGED_AREA note all other hours, or sometimes 3 times per hour.

  I went through all the troubleshooting process, finished with a bluescreen debugging possible analysis demonstrating that the ntoscrnl.exe driver might cause the blue screen issue.  And on the morning of the next day my computer greated me with a black screen with an ERROR: no boot disk was detected or drive failed.

  I can still get into the BIOS by pressing ESC at the present time of HP sign appear early attempts to restart.

  BIOS indicates that the hard disk is detected (yay!), so it is not the source of the problem.

  Memory and disk test went well passed, PASSED tests successfully.

  Pushing ' restore the original and exit "in the bios does not help.

  Nothing else works. Only these two ESC and F10 keys.

  How can I fix the system?

  I don't have a HP with PC Restore disc when I bought it. Site Web of HP didn't kits of restoration for the moment.

  What to do?

  SOS help, please!

  It is the computer that I use for work and personal use. There are gigabytes of photos of my family, as well, who desperately, I don't want to lose...

  I'll be super thankful for all reasonable advice and direct instructions!

  The ' ERROR: no boot disk was detected or drive failed. "  May be a simple solution to redo the botmanager file.  This normally requires a bootable DVD with the repair function or a USD bootable with windows and repair function.  Windows 10 is installed, this would be my choice getting either the drive or the USB key.  HERE IS THE MEDIA tool of M$.  Make the work of another PC, DVD or USB and then - on PC - start problem that media and choose repair when loading of the POPup screen.  DO NOT install.  If you install it, it will eliminate your data.

  BTW: 10 Windows is installed, the HP recovery disk will return the PC to Windows 8.

• Pavilion dv6 - 7095ca: no boot device - insert boot disk and press any key

  
  

  Thanks for your help and please excuse my bad English.
  Please check item 7, if you're in a hurry. This is the point with my Pavilion DV6 - 7095-CA:

  (1) the operating system is Windows 7 Home Premium (64 bit), the provided original with my 7095CA Pavilion, more updates HP until 2013, and all Windows updates until July 2015.

  (2) now I can't access the operating system and I have no interface UEFI. I can see that I press F2 at startup, just a test simple disk in BIOS f.0Une (the test shows that the disc is OK)

  (3) return in 2013 it took a drive failure. I did replace the disk and reinstall original Win7, all updates, including the HPS, win7 updates and all my personal software.

  (4) at this time, I bought a spare hard drive and did a complete copy of the disc using Partition Wizard bootable cd. The second disc has been tested and worked perfectly, with all of my personal software on this subject.

  So I have 2 HDs identical with the same system on both drives, fully working and tested.

  (5) a few days ago I came across the HP website and made a few updates, including the BIOS f.0Une (the last BIOS update, was of course).

  (6) after BIOS update ran, I received the message "no boot device - insert boot disk and press any key".

  (7) I couldn't solve the problem, so I did remove the hard drive and install my backup drive, which lay in a dry place without danger from 2013.

  (8) I turned on the computer and got the same message "No boot device - insert boot disk and press any key", and I couldn't find any way to solve this problem.

  Now I'm doing a new installation on a third HD everything works very well, so far, in the new facility and I will never buy HP again.