Problem importing Certificate SSL in gateway desktop remotely

Similar Questions

• Connection to remote desktop using proxy and gateway desktop remotely?

  I have setup a gateway desktop remotely using Windows Server R2 2012 server. I use Remote Desktop gateway as an intermediary between to offer remote desktop session more than 443 because 3389 is blocked in several places of the customer.

  However, I encountered a problem with a customer that the network seems to use a web proxy.

  Is is possible to set up remote desktop to connect via web proxy? If so, how? If this is not the case, does anyone have any suggestions on how to provide a remote desktop session through 443 on proxy for situations where you don't control the client PC or network? RemoteApps allows access through the web proxy when you use Remote Desktop gateway?

  The error message is below to:

  Your computer cannot connect to the remote computer because the web proxy server requires authentication. To allow traffic not authenticated to a desktop gateway server remotely through your web proxy server, contact your network administrator.

  Thanks for any help!

  Hello

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.

  TechNet Forum
  http://social.technet.Microsoft.com/forums/Windows/en-us/home?category=w7itpro

  Hope this information helps.

• where is the gateway desktop remotely

  where can I find the ts gateway to start Remote Connection

  Hello

  You can check the link provided to configure settings for the TS Gateway Remote Desktop connection
  http://TechNet.Microsoft.com/en-us/library/cc770601 (WS.10) .aspx

  If you are still having no problem with the TS Gateway then I suggest you post in Windows 7 IT Pro TechNet Forum. Validation of the query in the link mentioned below:
  http://social.technet.Microsoft.com/forums/en/category/w7itpro

• Problems installing certificates SSL on a RV325

  IM pretty new to this router interface and I need help to install my external certificates on my RV32x router.

  I created my CSR, it has provided to the authority of SSL.  Both my web certificate (X.509) and my intermediate CA was provided to me.   The router's request. PEM format certs, so I made sure that the format of certificates followed lines of anchor text (BEGIN CERTIFICATE and END CERTIFICATE).

  No matter what I do, any order, format, the combination of keys (X.509 and CA) intermediate - and I went so far as to reissue the certificates and start from the beginning.  I've recreated the CSR, had the power of SSL to send me new keys and tried again the steps (in case I missed something, Miss a step, or SOMETHING...). I even went out to HQ and got another case here, there was a problem there.

  I got errors where it is said that the "key Certification is not valid." "" Check the public key for the date and time... ", etc.  All seem like mistakes that don't relate to the action, I show.

  Someone at - he had that same experience and found a way through it?   I thought I was pretty knowledgeable in this area, but I'm guessing me!  :)  Any help would be greatly appreciated.   It shouldn't really be this difficult!

  Hi Scott,.

  Could you try it by following these steps:

  Before you measures make sure that you have a backup of your original file

  1. open ciscorouter.pem with Notepad + or PSpad.

  2. you can find there is a private key and three certificates in the file.

  3 copy the private key and the first certificate include the begin/end message.

  -----BEGIN PRIVATE KEY-----

  .

  .

  .

  -----END PRIVATE KEY-----

  -BEGIN CERTIFICATE-

  .

  .

  .

  -CERTIFICATE OF END-

  4. Paste the content in step 3 to a new file named Cer_plus_private.pem.

  5. make sure that there is two newlines in the end, then save it. [This is the workaround for]

  This problem].

  6 copy the certificate to the second and the third certificate include the begin/end message.

  -BEGIN CERTIFICATE-

  .

  .

  .

  -CERTIFICATE OF END-

  -BEGIN CERTIFICATE-

  .

  .

  .

  -CERTIFICATE OF END-

  7 paste the content in step 6 to a new file named CA.pem and save it.

  8 import CA.pem and Cer_plus_private.pem in RV32x.--> success.

  Kind regards

  Aditya

• Firefox Mobile has a kind of key store? How to import the SSL client certificate?

  Firefox Mobile has a kind of key store? How to import the SSL client certificate?

  There is no built-in way to add client certificates to Firefox for mobile. We hope to add this in a future version.

  See this previous question for some (kind of complicated) ways to add client certificates in the current version of Firefox for mobile:
  https://support.Mozilla.com/en-us/questions/786035?s=certificate & As = s

• Import a certificate SSL on SG500X

  I try to use SSL certificates disconnected by the internal CA on all our SG500X and SG500 rocker, the manual is a little vague on the process of importation of the real process, I have generated demand for the switch without specifying a new key (so I guess it used the default value), has presented the request of my CA and downloaded the cert. Because the import option does not allow the import of the cer file, I open with a text editor and copied the cert, including start and end markers, when I submit, in it I get the error: SSL could not import the certificate - conversion of entry to the certificate failed.

  Hello Steve,.

  Here is a step by step guide to import the SSL certificate. I hope this helps.

  http://sbkb.Cisco.com/CiscoSB/UKP.aspx?VW=1&docid=49843175a37149768dc4c331a05dce92_Edit_SSL_Server_Authentication_Settings_on_SG500x_Series_Sta.XML&PID=2&respid=0&SNID=3&DISPID=0&cpage=search

  Nana

• Another gateway server desktop remotely in the RDP client file

  It is possible to specify another gateway server desktop remotely in the RDP client file?

  Thank you
  David

  Hello

  The question you posted would be better suited to the TechNet support forum. I suggest you to check with TechNet support for more information.

  http://social.technet.Microsoft.com/forums/en-us/newThread?category=WindowsServer&Forum

• I have a problem with access to a server through remote desktop.

  Original title: impossible remotely to the server, but it can remotely to the server B and then server remotely

  We have difficulties to access a server through remote desktop.

  When you try desktop remotely to a server, it will notice connect.
  When you attempt to ping the server all the queries expire.
  However, he seems to know the correct IP address.
  If I'm away for any other server on the same network, I can then remote to the server from this server, but not directly, as I have other.
  Can I remotely from my office at work to this server.  I can't just access this server from my home PC.
  We are just confused...

  Hello

  Thanks for the quick response.

   

  As the computer is on a domain network, the question would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.

  TechNet Forum

  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads

   

  Hope this information helps.

• XP Patrick servidor y desktop remote

  Tengo el siguiente problema tengo una red con windows 2003 server y back estaciones trabajo con windows xp estas comparten una Patrick en red y use desktop remote el para a management system, el problema viene that server of Patrick cuando hace to manda a desde el desktop remote o desde print training local, sometimes love los trabajos en impresion cola y tardan una enormidad impresion o well is pierden los trabajos.

  Esto no me sucedio jamas're una more hp 1005.
  PC 1 xp---> more hp 1005 (compartida
  2 PC xp use more red en esta envia los datos sin problemas
  PC 1 xp---> more hp (1005) compartida, blog al desktop remote
  2 PC xp (en red no you can print o soon a tiempo monto the impresion no hay veces than is in cola impresion y dice imprimiendo y no sale nada)
  sale the pc1 del remote desktop is to print...
  Esto me sucede.
  If alguien me dar una mano the agradecere you can.
   

  Hello

  Please select your language from the drop-down menu above to post your question in the language of your choice. The forum in which you've posted is for English only. If you can't find your language above, support for additional international sites options are by following the link below:

  http://support.Microsoft.com/common/international.aspx

  I hope this helps.

• Can connect with desktop remotely all directions except via internet Windows XP to Windows 7

  I have a new computer with Windows 7 Pro to work I need with desktop remote access so that I can work from home and be with the family.  For years I used remote desktop connection from home using Win XP SP3 to my Win XP Pro SP3 computer at work.  I am able to connect my old WinXP computer work on my new Win 7 computer (locally).  I can connect from home computer Win XP Win XP computer via internet (DSL) to work.  I can connect from Windows 7 computer to work at Windows XP home computer over the internet (DSL).

  So, I have Setup port forwarding or modems DSL correctly, the IP addresses are correct, consistent remote desktop clients. Firewall exceptions are configured correctly.

  What is different.  The new computer with Windows 7 Pro has McAfee Internet Security all others running EAST of Kaspersky.  Win 7 computer is new.  Since I am on various possibilities of connections, changed listening port of 3389 on some computers, including the new Win7 computer (this should not be a problem that I'm able to connect locally).

  Disable the firewall (software Anti-anti-virus/IS) on both computers does not help. In any case, I can go to WinXP Pro to work on Win 7 computer to work locally.

  My thought is that there may some security policies, or maybe a protocol problem which is different with the new Windows 7 computer that does not have a connection outside the local network (via a public network).

  I also tried to set up a VPN connection integrated Microsoft: forwarded port 1723, the GRE protocol allowed to the DSL modem.  Tried all different scenarios between Win XP Home and Win 7 computer at work and cannot configure the VPN connection. I get error 678: the remote computer did not respond.

  I spent hundreds of discussions help/knowledge base and discussion review.  I have seen or followed all the instructions on the various sites of tech Web to configure VPN connections and Remote Desktop connections.

  Does anyone have an idea as to what could be the solution here?

  Hello

  Please post your request in the Microsoft TechNet forum, where experts on this platform can help you with the problem.

  Please see the link that will take you on the TechNet forums below:
   
  https://social.technet.Microsoft.com/forums/en-us/home?category=w7itpro

  Hope this information helps. For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you.

• Certificate SSL VPN

  Hi all

  I have configured the SSL vpn client and the client less ssl vpn, but I am not able to connect cisco vpn client softrware and also browser, because of certificate problem, can you please tell how to create the certificate SSL VPN

  Thanks and greetings

  Rajesh Gowda

  Sign up for a certificate from a public certification authority and use the FQDN to connect to the VPN. Then these warnings should not appear.

• a PC can not the desktop remotely to a server by using the service account

  The scenario, I have:

  A Windows 7 Enterprise SP1 64 bit pc, lets call it PC1.

  A Windows Server 2008 R2 Enterprise SP1, lets call him Server1.

  A service account, lets call him Service1.

  -PC1 on ad domain network, can ping Server1 by IP and vice versa. PC1 on the same subnet as the other PC.

  -Server1 on a working group, has same DNS as PC1

  -Service1 is used for all the desktop remotely to Server1.

  The problem:

  All the PC's on the field are able to Server1 using Service1 remote desktop, but unable to PC1. (This displays Server1 accepts the remote desktop connection, and credential Service1 works very well)

  Tested PC1 can desktop remotely for all other servers on the network. (cela poster services the PC1 Remote Desktop works fine)

  Error:

  This computer cannot connect to the remote computer.

  Try to connect again. If the problem persists, contact your network administrator or the owner of the remote computer.

  Any idea?

  Server are better to ask questions on the Technet site.

  http://social.technet.Microsoft.com/forums/en-us/categories/

• I have Windows Server 2008 R2. I have set up the desktop remotely for 5 users, but each time a user logged on to the other user will be disconnected.

  issue license remote dekstop

  I have Windows Server 2008 R2. I have set up the desktop remotely for 5 users, but each time a user logged on to the other user will be disconnected. Is this a problem with the license? Is it how do I get license for 10 users remote desktop? Thank you

  You will get the best answers by posting in the dedicated remote desktop on TechNet Forum:

  Remote Desktop Forum services (Terminal Services)

• Client certificate SSL V3.0

  How can I connect to a web service that requires client certificates SSL V3.0 using CFMX?
  
  I am trying to use a client certificate to connect via CFHTTP a secure Web site and I'm getting a "403.7 - Forbidden: certificate customer required" error. I have correctly installed the Web site cert by following the instructions here:
  http://www.TalkingTree.com/blog/index.cfm?mode=entry & entry = 25AA75A4 - 45a 6-2844 - 7CA3EECD842D B576
  
  When I access the secure site using IE, I am asked to use the installed client certificate, and then I'm able to view the content secure without no 403 errors.
  
  After completing the research question, I read in this post that CFMX7.01 does not support the SSL V3.0 protocol:
  http://www.houseoffusion.com/cf_lists/message.cfm/forumid:4 / messageid:229870 / step: 0
  
  Did someone using client certificates SSL V3.0 with CFMX7.01? Is it a question of Adobe or java problem? Are there alternatives?
  
  

  CFX_HTTP5 worked great!

  I wish just called him 'good '. I asked the question about a popular mailing list and got absolutely no response. I also searched Google for a few hours and did not find anything. CFX_HTTP5 did the job and now I can finish what I started instead of saying my client I found a mission critical issue that ColdFusionMX couldn't do.

  Thanks again!

• Equipment does not respond when connected with the desktop remotely

  Hello

  I have a PC with labview controlling a power supply via a serial connection. It works fine, except when I am looged in remote to my PC from another PC lab via desktop remotely. The VI runs correctly, but does not have the equipment to receive orders. Why would it be?

  Thank you

  Guillaume.

  If you have configured, the remote computer might try to use the serial port on the computer you're remot desktopping of.  Carefully go through the remote desktop settings and make sure that you are not telling the remote computer to use local ports.