Problem in installing driver wifi

Similar Questions

• Cannot install driver WIFI on my Satellite Pro DR L850-1

  Hi guys,.

  I installed windows 7 64 bit on my Toshiba Satellite Pro DR L850-1 by making the new partition which formats the hard drive.

  After installation I was expecting windows 7 will find the drivers from internet or if not I'll download them from Toshiba Web site.

  I downloaded and installed all the drivers from the LAN and WLAN drivers first.
  All the other drivers installed perfectly and their respective hardware works fine, but the WLAN Atheros driver that does not install the Setup program does not start and I tried all means known to me or I can find on the internet to install it.

  Any help will be much appreciated.
  Thank you.

  Generally after a clean OS install, you should start with the chipset driver, display driver, driver sound and so on.
  Have you installed driver chipset before you tried to install the WLAN driver?

  By the way: you try to install this driver from the Toshiba download page?

• HP PAVILION 15-AC027TX: NOT ABLE TO INSTALL DRIVER WIFI FROM HP-AC027TX. OS-WINDOWS 8.

  Hello

  My laptop was bought a few months months, and it came with a windows installation 8. I found the wireless network does not connect and so got their hands on the following drivers from the HP site (and other instances where the same problem got addressed)

  1. sp64043
  2. sp66924
  3. sp69929
  4. sp70725
  5. sp71268
  6. sp71288
  7. sp71432

  I'm disappointed to find none of them work for my laptop. and it has been for some time. I had a request raised before but which has not been resolved with a proper soluton.

  Therefore, consider this a very urgent and serious matter and help me do more with the problem as soon as POSSIBLE!

  Debasree_Chatte

  Hello;
  
  Let me welcome you on the HP forums!
  
  I read your post on that need WiFi drivers and wanted to help.
  
  I'm not surprised that some people don't work - you have mixed in with WiFi drivers bluetooth drivers.

  Unfortunately, your mobile PC series comes with three different WiFi chipsets: Intel, Broadcom and Realtek - and you need the drivers for the specific chipset in your specific PC.

  Try to download and install HWInfo64: http://www.hwinfo.com/download.php

  When you run that, it should show you the chipset WiFi present in your PC - and which will help find the right drivers.

  Good luck
  ========================================================================
  I'm a volunteer and I do not work for, or represent, HP.
  ---------------------------------------------------------------
  If my post helped you, please click on the Thumbs-Up symbol on my post to say thank you.
  If my posts resolved your issue please click "accept as a Solution.
  ========================================================================

• HP 15-d043se Notebook PC: problem in installing driver for nvidia geforce 820 m

  Hi guys

  I have HP 15-d043se Notebook PC with windows 7 64 bit and I have error to install the graphics driver from nvidia geforce 820 m, I downloaded and installed all the drivers (including intel graphics hd 4000) driver from the official site of hp support here as you can see in the image below:

  

  but when I try to install the nvidia driver I get this error:

  

  I also tried to download the drivers from the nvidia official site, even changed the OS of windows 10 for windows 7, but no luck... Help, please

  Good news! I just sloved question by updating Bios graphics card appeared in as '3D video controller' Device Manager, then I installed the nvidia driver and we installed seccessfully! )

• Downgraded to Windows 8 to 7, and now I could not install driver Wifi or WiFi!

  Hello

  I had the laptop

  Envy of HP dv7-7290eo * P.ID: C1W26EA #UUW, Windows 8 has been installed on it, so I reformat my PC to Windows 7 Ultimate x 64.

  And now, I couldn't find any driver network, just to have internet access to update all my drivers.

  I made mistake? installation of windows 7.

  Unfortunately, I have recent PCs, have a lot of drivers then the old machines, but I was wrong.

  Buy this days old PC, IS SO BETTER, because you could find a lot of drivers for Windows 95, XP, Vista, 7,.

  And this new laptop is useless since it have only Windows 8 drivers!

  Please HP, we need support for this laptop on the other operating system,

  IM LIMITED ON WIN8!

  Thank you for your understanding

  Thanks for your reply,

  I solved by buying DriverTuner program and installed all the drivers for windows 7

  

• Pavilion 15-p050ca: driver wifi can not install winner 8.1 hp Pavilion 15 - p050ca. Product G6U13A number

  WiFi does not work, install the driver wifi, I got this msg: update.cpp1205 "has occurred and Setup can not continue"

  How to solve the problem?

  I solved it bymysellf

  by this driver compatiable

  someone wants help like me this link

  1 x 1 11 b/g/n Wireless LAN PCI Express Half-Mini Card adapter

• Installation clean P580 Win 7 Ultimate 64 bit - cannot install driver Intel WiFi correctly

  Driver installation went well after a clean install. I was not aware of any special settings or any need to install some drivers in the order. So maybe I did not just something.

  I noticed that there was no WiFi service. I have downloaded and run the file 0zwl03ww.exe, which is listed as driver WiFi Intel for Win 7 32/64. I got a message saying that something could have trouble with the installation. So I chose rerun. Asked me if I wanted to replace an existing file. I said "Yes to all". The result was a message saying "access denied." Later, there was still no WiFi and no WiFi service pilot shown in Device Manager.

  I restarted the PC, hoping it would help. Still no WiFi and no shown in Device Manager.

  I looked at the folder C:\Drivers containing the driver files and subdirectories. I removed those and tried to delete the folder. I didn't have the right to do. I checked the security settings on the folder and showed a red X with a message saying that the security settings are not available.

  When I try to reinstall the driver, I get the same results reported (files to be replaced), but no files are displayed in Windows Explorer in this folder.

  I tried to restore the original file to the Recycle Bin. Restoration happened, but now the files are gone.

  There is another pilot provided for Liteon & CyberTan; This doesn't seem to be the right driver.

  If the PC is running, LAN, internet cable OK - but I'm stuck with no WiFi. Can anyone help? Thank you!

  I found and ran a setup.exe for Win7 inside the extracted folder. I went through the typical installation of choice routine and told me "The Intel ProSet Wireless WLAN software Setup Wizard ended prematurely" with no further explanation given.

• HP OfficeJet 4650: Problems installing driver HP OfficeJet 4650

  I can not scan with my printer. I tried to install the driver HP several times. Each time it is said that it has installed successfully.

  When I add the printer to the list on printing & scanning in system preferences, it finds the printer (because it is attached to my computer via a USB cable) but in the ' using Print:' section, automatically selects the generic printer PCL. HP OfficeJet 4650 isn't in the drop-down menu to select in this section. This means that there is a problem with the driver installation?

  I tried to uninstall the software, but I can't uninstall it, suggesting that it has not been correctly installed in the first place.

  What can I do?

  Hey @HPURCELL,

  Welcome to the Forums of HP Support!

  I understand that you have some problems with your machine of Mac OS x 10.7 printing to your 4650 e-all-in-one printer Officejet. What is happening is that the printer drivers have been installed for Mac OS x 10.8 or later. The installation program is running, but the Mac printer does not communicate. To scan, you will need to upgrade to Mac OS x 10.8 or later version.

  Please let me know if that solves your problems. If so, please click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

• Problems when installing a driver for my scanner

  Hello!

  I have serious problems when you try to install a driver for my scanner - Epson Perfection V700 - on my desk. It was installed earlier, but after a reinstall of XP Pro (SP3), it seems impossible to install it again. Whenever I get an errormessage: "not able to copy the files. Make sure that the target disk is not dead. »

  I tried to install the driver when I had turned off almost all the programs, in "auto-start" - same problem. I run a scan of the disc and also done a defrag - same problem. I have installed many programs on my desktop, so until after I encountered the problem with the driver for the scanner and it was no problem to install the driver on my laptop (also XP Pro).

  I ' v chatted with the support of Epson in England and they have suggested that the problem was in my PC. Because I'm taking care of family archives, I am more eager to get the scanner working again. Any advice/suggestions how to deal with the situation are so much appreciated.

  Hello

  Good to know that your problem is resolved and thanks for letting know us.

  ·        If the scanner works fine then, why do you want to update the driver?

  You may need to consult the manufacturer of the scanner (Epson) to check if they have released an update of the driver for your scanner. To update the drivers on which are present on the system, follow the steps mentioned in the article below.

  How to manage devices in Windows XP

  http://support.Microsoft.com/kb/283658

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• Cannot install Vista service pack 2 is 800f0a09 error code with the message that there are problems with the driver for dell latitude

  Original title: why I get error code 800f0a09 to upgrade to windows vista service pack 2

  I have a laptop del that is running on Windows Vista Edition Home Premium. I tried to download itunes but it requires service pack 2. Whenever I try to update to service pack 2, I get the message following error code 800F0A09. He also mentioned problems with the driver for dell latitude. What can I do to fix this please.

  Thank you

  Hello

  Please join Microsoft Community where you can find the necessary information on Microsoft products!

  You can not install Vista Service pack 2 and get the error with code 800f0a09 and the message that there are problems with the driver for dell latitude.

  The problem may occur if some of the components of the update are corrupt.

  What is the full error message that you receive?

  I suggest you follow the steps mentioned below to check if the problem is with the update components:

  Method 1: Reset the update components

  See the site:

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Warning: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

  Method 2: Run the system update readiness tool

   

  See the site:

  System update scan tool corrects errors of Windows Update in Windows 8, Windows 7, Windows Vista, Windows Server 2008 R2 and Windows Server 2008

  http://support.Microsoft.com/kb/947821

  Method 3: Turn off the antivirus software

   

  See the site:

  Disable the anti-virus software

  http://Windows.Microsoft.com/en-in/Windows-Vista/disable-antivirus-software

  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  I hope this helps. If the problem persists, let know us and we would be happy to help you.

• Problem to install the driver for the AMDA00 interface

  I have problem to install the driver for the interface of AMDA00 under the system of the device. I am using ASUS motherboard H87 - more.

  When I update the driver it is a prompt window found driver software, but has encountered an error trying to install it, 'access denied '.

  Get the drivers on the site of Asus, specific support to your me board

• Problem install driver Hp Laserjet 1200 (for Win 7)

  Colleague in the morning

  I have problem in installing a driver for my printer Hp laserjet 1200

  I recently updated my system to Win 7. My HP laserjet printer driver works but all of a sudden it stopped.

  I re - download hp driver form site "upd-pcl6 - x 32 - 6.0.0.18849.

  He showed that it successfully installed. but gives this error whenever I want to print

  PCL XL error

  Subsystem: KERNEL

  Error: UnsupportedProtocol

  Operator: 0x0

  Position: 0

  Kindly help

  Hi JamiuKeshinro,

  The driver for this device is included in Windows update. Disconnect the connection USB printers

  Delete the printer

  To remove a printer

  Remove the HP UPD driver and driver package

  logo Windows + R key

  type printmanagement.msc

  Remove printer drivers

  Add the printer by using Windows Update

  To add a local printer

• Problems to install the driver for Canon lasershot 2900B printer, to get the message "installing the driver interrupted."

  I have problems to install the driver for Canon lasershot 2900 B printer. I have windows 7 64-bit (SP1) installed in my PC. I get the message "driver installation interrupted. I had downloaded and installed the latest driver and I get the same result. I was told it might be a problem with OS. I have had no problems to install the drivers for the scanner or hardware drivers. Thanks in advance.

  Original title: printer drivers

  Thanks for the reply of Ravi Shankar. My PC is a Dell Inspiron 530. There is no specific error message except for the one I provided. There is a solution to this problem. It seems that if the print spooler is disabled (services and storage via the computer management), the installation of printer driver is interrupted. I manually activated the spooler on automatic printing and the printer driver has been installed immediately.

• having problems to install a driver

  Hi I have a windows netbook eepc 7, I have problems to install a driver can help you please? XX

  Your only other option is to go to a computer to work with a Player DVD copy the contents of the disc to a folder and copy this folder on a USB and install from it on the target computer.

• Problem installing driver CM1312nfi

  I have an HP CM1312nfi on a wired network.  I can print to the printer very well from a vista computer.  I'm now trying to get a XP machine to print to it.

  XP SP3 machine operation, everything is up-to-date.

  I tried to install from the disc supplied, but got the same problem as described below.

  I went on HP driver download site and got the following for an XP installation file: CM1312-net-express-install-win32-AM-EMEA1.exe.  During the installation, everything seems fine.  I am able to get to the point select the printer to install.  When the installation continues at this stage, I get an error window that says "the system isn't the path specified".  No other information.  The header of the window says:

  "C:\HP_CM1312_Net_Express_Install\setup\hppnet01.exe" - I networkonly - f C:\windows\hppins11.dat-valider ENU...

  The installation rolls back them then I was download the Solution for Installation of HP Windows XP error.  I've been there several times.  Same result.

  Any solution to this?

  OK, got with in-person technical support and they connected to the PC and saw the problem.  They couldn't get the printer setup is complete.  However, during the call, he mentioned that he had to be uninstalled from things to work my old multifunction.  He has deleted some files, however, the problem of installing persisted.  After the call, I did a complete uninstall of all the old multifunction components and reinstalled the HP software.  Installation is finished and it is running on the network!  Even if the call to customer service does not solve it online, he has me looking in the right direction.

  Problem solved.