problem in my computer network driver portable hp 1000-1324TU.

pls I need driver network for my hp 1000-1324TU here is the id of the hardware:

PCI\VEN_1814 & DEV_3290 & SUBSYS_18EC103C & REV_00

Thank you.

driver for Windows 8 is available here on the Portal Server to suport HP laptop.

Your wireless adapter is a Ralink RT3290.

802.11n + Bluetooth 3.0

Best regards

ERICO

Tags: Notebooks

Similar Questions

  • Problem connection to external network drive Windows 7 Windows VM (VM Fusion v4.0)

    I'm relatively new to MAC-VMWare Fusion v4.

    On my old PC I use to have a shared disc on a remote support windows Center which I could map a network drive to a share using a user account defined local to the Media Center.

    I set up a virtual from Windows 7 on Fusion 4 computer and it seems to be running OK, i.e. can run applications and access the internet.

    However, I can not ping-access the correct Media Center by using the user account-profile.

    Please can you help so that I can remove my monster of a Windows PC.


    Thank you...

    By default, VMware Fusion sets the prompt to NAT virtual network adapter and you must set it to Bridged so the virtual machine is on the same subnet as the system you are trying to map a shared resource.

  • HP Pavilion network driver portable 15-e026AX for windows 7

    I want to pilot all my

    HP Pavilion 15 laptop-e026AX please help me

    Hello:

    Here are the links to the drivers you need except the wireless card.

    First, install the amd chipset driver and restart.  You want the first file on the Web page.

    http://support.AMD.com/en-us/download/chipset?OS=Windows 7-64

    Then, install the beta amd catalyst driver and restart.

    http://support.AMD.com/en-us/KB-articles/pages/latest-catalyst-Windows-Beta.aspx

    Audio: Accept the agreement, download and install the driver for the second on the list. "

    http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PNid=24&PFID=24&level=4&Conn=3&DownT...

    Ethernet: Download and install the driver for the second on the list.

    http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PNid=14&PFID=7&level=5&Conn=4&DownTy...

    USB 3.0: Install both.

    http://h20565.www2.HP.com/portal/site/hpsc/template.page/public/PSI/swdDetails/?sp4ts.Oid=5359417&SP...

    http://h20565.www2.HP.com/portal/site/hpsc/template.page/public/PSI/swdDetails/?sp4ts.Oid=5359417&SP...

    Card reader:

    http://h20565.www2.HP.com/portal/site/hpsc/template.page/public/PSI/swdDetails/?sp4ts.Oid=5359417&SP...

    3D Driveguard:

    http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-124661-1&cc=us&DLC=en&LC=en...

    Webcam:

    http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-127341-1&cc=us&DLC=en&LC=en...

    For the wireless, follow these steps so I can post the wireless driver that you are interested in...

    Go to Device Manager.

    You will see a labeled device network controller and it will be a little! mark next to him.

    It is the wireless card that needs a driver.

    Click the network controller device. At the top of the network controller window, click the Details tab.

    Now, you see a Description of the list system default list drop-down property.

    Drop down on it and select the second element (Hardware ID).

    Now, you see 3-4 lines of characters, the upper line starting with PCI\VEN.

    After this first line of characters and I'll post the link for the driver, you need for the wireless card.

  • HP 750 055xt: clean install / desire / network driver problem

    Want to 750-055xt. Bought as a refurb. SSD is small, so I put more in and did a clean install with Windows 7 Professional.

    Internet - network driver problem does not connect and I see that the drivers are missing. I tried searching the site, but I can't find the driver.

    It's not a hardware issue because I can put the other drive and it works fine.

    I am struck an impasse with the search tool. I need to copy the driver on another computer to move.

    All of the suggestions.

    Thank you.

    Hello:

    Page for your model motherboard plug indicates that there is a CG-RTL8151GH-Realtek gigabit ethernet card.

    See if the W7 directly from Realtek driver works - 3rd driver on the list.

    http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PNid=13&pfid=5&level=5&Conn=4&DownTypeID=3&GETDOWN=false

  • Cannot get Windows XP Home Edition for a mapped network drive / share on a computer of Windows 7 Pro 64-bit

    I constantly tried to use the "NET USE" syntax to get a Windows XP Home system to keep & share mapped network drive on a Windows 7 Pro 64-bit of the system and nothing I tried or worked on ANY blog. I can map the current network through made normal drive right click on 'My computer' and then provide a designation of drive letter with the correct path and have had great success using the function "connect using a different user name." However, even with the box checked to re-connect to the opening of the service is WORTHLESS! I made a lot of attempts to use the Net use syntax to create a batch file to overcome this non-functional raw application. I would really appreciate someone who actually had this issue resolved and work. I have looked at all the Windows files on the XP machine, searched the registry about a possible switch, which could make the necessary changes and have made all necessary changes on the Windows 7 system to accept the mapped network share. Help!

    Hello

    Since you have a network with different OS' I hope that Win 7 is configured to run on asnetwork work.

    If evry thing is configured properly it can be a problem of how your router keep information network. With the help of Staic DHCP or IP static on computers could help solve the problem.

    Just in case you need to reconfigure your network.

    ---------------

    Win7 when configured on the peer-to-peer network has three types of configurations of sharing.

    Group residential network = only works between Win 7 computers. This type of configuration, it is very easy to entry level users to start sharing network.

    Working network = fundamentally similar to previous methods of sharing that allow you to control what, how and to whom the records would be shared with.

    Public share
    = network Public (as Internet Café) in order to reduce security risks.

    For the best newspaper of the results of each computer screen system and together all computers on a network of the same name, while each computer has its own unique name.

    http://www.ezlan.NET/Win7/net_name.jpg

    Make sure that the software firewall on each computer allows free local traffic. If you use 3rd party Firewall on, Vista/XP Firewall Native should be disabled, and the active firewall has adjusted to your network numbers IP on what is sometimes called the Zone of confidence (see part 3 firewall instructions

    General example, http://www.ezlan.net/faq#trusted
    Please note that some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic. If the 3rd party software is uninstalled, or disables, make sure Windows native firewall isactive .

    Since you have a network with Win 7 and the other version of Windows, you must configure Windows 7 as work network.

    In the center of the network, by clicking on the type of network opens the window to the right.

    Choose your network type. Note the check box at the bottom and check/uncheck depending on your needs.

    http://www.ezlan.NET/Win7/net_type.jpg

    Win 7 - http://windows.microsoft.com/en-us/windows7/Networking-home-computers-running-different-versions-of-Windows

    Win 7 network sharing folder specific work - http://www.onecomputerguy.com/windows7/windows7_sharing.htm

    Vista file and printer sharing - http://technet.microsoft.com/en-us/library/bb727037.aspx

    Windows XP file sharing - http://support.microsoft.com/default.aspx?scid=kb;en-us;304040
    Sharing printer XP - http://www.microsoft.com/windowsxp/using/networking/expert/honeycutt_july2.mspx

    Setting Windows native firewall for sharing XP - http://support.microsoft.com/kb/875357
    Windows XP Patch for sharing with Vista (no need for XP - SP3) - http://support.microsoft.com/kb/922120

    When you have finished the configuration of the system, it is recommended to restart everything the router and all computers involved.

    * Note. Some of the processes described above are made sake not for Windows, but to compensate for different routers and how their firmware works and stores information about computers that are networked.

    -----------------------

    Jack MVP-networking. EZLAN.NET

  • With my HP Pavilion Elite m9250f desktop PC, I have problems to get the network and the other driver.

    With my HP Pavilion Elite m9259f desktop computer, purchased in 2008, I have problems to receive a network and other drivers. In addition, I can't find my recovery disks.

    Any help would be much appreciated.

    Rebecca O

    Hello:

    If you post them details of the device string ID for each device in the Details tab in XP, I can send you the link for the drivers.

    For now, I can send pilots based on the material in the manual, and if your PC has different hardware, so I could waste your time and mine.

    Always install the first chipset driver:

    http://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&DwnldID=20019&ProdId=2842&lang=eng&OSVersion=Windows%20XP * & DownloadType=.

    This should be your integrated graphics driver:

    http://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&DwnldID=18774&lang=eng&OSVersion=Windows%20XP%20Professional * & DownloadType=.

    Audio: Accept the agreement. Download and install the 3rd driver on the list.

    http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PNid=24&PFID=24&level=4&Conn=3&DownTypeID=3&GETDOWN=false

    Network: Download and install the 6th on the list.

    http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PNid=13&pfid=5&level=5&Conn=4&DownTypeID=3&GETDOWN=false

    If none of them do not work, please post the hardware ID so I can help you further.

    Paul

  • Error when you try to connect to a shared network drive by car on the portable XP from VISTA desktop: "not enough server storage is available to process this command."

    Hello
    I was able to connect ok in a shared folder on my laptop VISTA from my XP desktop computer.
    but when I try the other way around (to connect to a shared drive on my desktop XP FROM my VISTA laptop), I get the following error message:

    "The mapped network drive could not be created because the following error occurred: not enough server storage is available to process this command."

    Desktop is HP Pavilion a1410n
    Windows XP SP3 Home Professional 3 GB RAM
    Laptop is HP dv5z
    Windows Vista Edition Home Premium SP2 4 GB RAM

    I would like suggestions.
    Thank you very much.

    Ideas:

    • You have problems with programs
    • Error messages
    • Recent changes to your computer
    • What you have already tried to solve the problem

    Remember - this is a public forum so never post private information such as numbers of mail or telephone!

    Steve,

    Thanks a lot for the link to this article.
    It was most helpful.

    I also found this forum useful post:
    http://www.techsupportforum.com/Networking-Forum/networking-support/114373-cant-map-new-network-drive.html

    In particular, he said to check the event log of the computer that you are trying to connect to (the remote computer) to search for an event ID 2011, which would be entered in the time you finally tried to connect and does not.
    I did alt-click on the icon MY COMPUTER (from the remote computer) and the menu HANDLE, click the EVENT VIEWER folder (in the left pane), and then the SYSTEM folder under that.
    On the right pane, I found an ad for the event ID 2011 at the time wherever I finally tried to connect.

    To test this, I went to the VISTA laptop and tried to connect the computer to Office XP again, which gives a different error message on the VISTA laptop.
    When I went back on the XP desktop I tried to connect to and looked again to the event log, of course ANOTHER event ID 2011 has been registered with the new time of my additional attempt to connect.

    He confirmed that it was likely that the IRPStackSize was the problem, as your proposed article.

    Then I printed article how DO TO SAVE AND RESTORE the REGISTER to: http://support.microsoft.com/kb/322756/
    then backed up the registry (both by running a restore system to register and by exporting from the top level of the regedit).

    I then went in regedit on the desktop in XP for the
    HKEY_LOCAL_MACHINE\SYSTEM\CURRENTCONTROLSET\SERVICES\LANMANSERVER\Parameters file described in your article.
    There was NOT an entry for IRPStackSize in the right pane, so I followed the instructions in the add - it and change it to decimal 15.
    I rebooted and tried to connect but still got the same error.
    The article said that the default value is 15, so I assumed that adding input IRPStackSize to 15 has not changed anything.

    So I went into regedit and changed the value of IRPStackSize of 15 to 18, restarted and it solved the problem.

    I found that the following articles is also useful in the resolution of this problem (aside from the one you gave):

    http://support.Microsoft.com/kb/285089

    http://www.smartcomputing.com/editorial/article.asp?article=articles/archive/r0803/10r03/10r03.asp

    I typed this all this while this might help others who may encounter this same
    Error "not enough server storage is available to process this command" when you try to
    Map a network drive (or just try to connect) to a XP computer from another computer.

    Thanks much for the lead.

  • How to use the full Windows Vista Edition backup utility to create a backup of the computer of my computer on a network drive?

    I can read and write in my Win7 computer I'm currently configured to run any server at home, I can watch TV, store files and folders individual, to create, remove, in other words all I can do on this machine, I can do. 3. to disks are mapped to this machine and show as readers y and z.

    I had no problem establishing actions and everything seems to work.

    However, when I try to do a full backup of a computer with network drives they don't show in the drive selection drop-down list in the center of complete backup of Windows. Arises in each drive on this machine, not the target readers when they are listed in my computer and do show and reconnect when I reboot the machines.

    Any suggestion would be appreciated.

    Thank you:

    Don

    Hi Don,

    You can follow these methods & check if it helps.

    Method 1

    You can cancel the drive mapping & check if readers appear in the Windows complete PC Backup Center.

    Disconnect your computer from a network or network drive

    Reference: back up your programs, files and settings of the system,

    Method 2

    In addition, you can also follow the suggestion of TexRyker on Wednesday, February 28, 2007 18:07 from this link.

    http://social.technet.Microsoft.com/forums/en-us/itprovistaapps/thread/f545e8ae-46fc-4BEE-bfd8-be1fe1151e04/

    Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about the back upward, and restore the registry in Windows: http://support.microsoft.com/kb/322756

    Hope the helps of information. Please post back and we do know.
    Concerning
    Joel S
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Problems with NAS network drive

    I have problems with network drives mapped to a Maxtor Central Axis device.

    I put in place of the personal folders with restricted access on the same level as the public drive by default. However, now that they will not connect and I get this message.

    "Year error occurred while reconnecting J: to."
    \\HOMESERVER01\Andrew
    Microsoft Windows network: Multiple connections to a server or shared
    resources by the same user, using more than one user name, are not
    allowed. Disconnect all previous connections to the server or shared
    resources and try again.

    This connection has not been restored. »

    What does that mean? Unfortunately it doesn't gives me an Error Message number. It happens that files with restricted access. Some of the restricted files will have 1/user computer tries to connect to this folder. Any help appreciated. Let me know if you need more information

    Hi AndySchliewe,

    You use a Windows Home Server?
    If so, I think you might want this post in the Windows Home Server community to see if there is no response

    http://social.Microsoft.com/forums/en-us/category/WindowsHomeServer/

    Good day

    Kevin
    Microsoft answers Support engineer visit our Microsoft answers feedback Forum and let us know what you think.

  • network drive problem

    Morning, I have a laptop Advent under win 7 and recently Google takes ages to load. In my computer, there is a Z drive with a red top is MEMORYCARD (\\EPSON2BAABD.

    In the system when windows loading tray, a message appears saying: "not able to connect all network drives.

    These could all point to google taking forever to load pages.

    Thanks in advance

    Hello

    Thanks for posting your question on the Microsoft community.

    Thank you for details on the issue.

    This problem may occur because of corrupted or incorrect network settings.

    I suggest using the steps described in the following articles and check if it helps.
    Reference:
    Network convenience stores
    http://Windows.Microsoft.com/en-us/Windows7/open-networking-troubleshooters

    Using the troubleshooter from network in Windows 7
    http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

    I hope this information helps.

    Please let us know if you need more help.

    Thank you

  • My computer is connected to the Windows 2008 R2 server and some of the users on this computer receive their network drive mapped on group policy and some do not.

    My computer is connected to the Windows 2008 R2 server and some of the users on this computer receive their network drive mapped on group policy and some do not.  I find nothing in Event Viewer that shows that there is a problem.  Please let me know what to do to get the disks appears

    Original title: Network Networking file sharing file sharing file sharing file sharing discovery sharing Fileshare share shared

    Hi,

    The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.

    TechNet Forum

    http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

     

    Hope this information helps.

  • How can I connect my Mac to a network server? As in windows yo go to my computer / connection to a network drive, and then you select a letter and write the name of the server that you want to be logged

    I'm trying to adapt Windows to my new MacBook Pro with OS El Capitan.

    I work remotely for a company and I want to connect my Mac to the server of the company.

    My question is how to connect a MAc to a network drive with the permanently available connection.  For example, in my old HP I went to my computer / connection to a network drive. I've selected a letter and note the name of the server that I wanted to be connected to. The connection was then shown with my other drive hard 'sections '; I want to say C:, D: (for recovery), e: (for tools) and then connecting to the external server has been shown with the selected letter.

    There is no "letter" under OS X. It's a hangover very old of BACK, devices of mapping and volumes labeled mailbox.

    If you are connected to your corporate network, you should see the available network volumes listed in the Finder, in ' my computer > network ", or with the command K to connect to a server.

    You can create an alias for the volume and put it in the Dock, or leave on the desktop or put it somewhere else, and the next time you want to connect to this subject, simply double-click on it. You can also add the server address to your "favourites" in the connect to Server dialog box.

  • EliteDesk 800 35W G2: G2 EliteDesk 800 35W network driver problem

    Hello

    We have a new EliteDesk 800 35W G2 phone in our office.

    In order to obtain compatible drivers, that I'm wrong.

    The one you suggest the latest network drivers for "G2 HP EliteDesk 800 35W.

    Network driver: Intel (r) Ethernet connection (2) I219-LM

    Pls share me the source for Windows 7 x 64.

    Thanks in advance!

    Pen

    Amala

    Was having the same problem for weeks. Finally found a driver that works with the boot image (6.3.9600) - found on the Lenovo site but works on HP EliteDesk 800 G2. Used download Win7/8.1. No other driver seems to work - get the blank screen because you do not have a work CARD driver (press F8 for CMD and run IPCONFIG).

    http://support.Lenovo.com/us/en/downloads/ds105362

    The driver version is 12.13.17.6

  • Pavilion g6-1d70us network driver problems

    I really need help.i have just installed Windows 7 Home premium on my Hp Pavilion 1d70us g6, but im having problems with its pilots, the Ethernet controller, Bus controller and pci simple communications controller. I can't find these three drivers. I tried to install almost every displayed on the Hp.com drivers network driver. but no cure

    Hello

    Please post the ID number of device here is how you can find.

    In the Device Manager menu, regardless of the way you have to, find the driver that is missing (no yellow question mark).

    -Right-click on it and select "Properties".

    -In the Properties menu, click on the tab "Details".

    -In the Details tab, click the menu drop down and select "Device Id".

    -When you have this submenu opened below, you should see one sentence that contains a couple of things you need.
    -C' is what it would look like for example:
    -PCI\VEN_10DE & DEV_03D1 & SUBSYS_14041565 & REV_A2 (could be a couple extra rows with some similar stuff, but the main things you need are the FRI and DEV).

  • It is an intermittent problem, as the excellent files, powerpoint will corrupt network drive.

    It is an intermittent problem, as the excellent files, powerpoint will corrupt network drive. Any help will be much appreciated.

    To avoid this, I'm making sure that files are not left open so much because we run backup incremental three times in a week.

    Files is not very high - about - 2 MB

    Some screenshots are inserted

    Thank you

    Amit

    http://answers.Microsoft.com/en-us/Office/Forum/office_xp-Excel?tab=unanswered&TM=1373425932359

    above is office xp, excel forum you might be better off poster in this forum that many people are familiar with excel and powerpoint.

Maybe you are looking for

  • Why my FF upgraded don't sport the look on your screenshots for help?

    OK, I upgraded my FF to the latest 5.0 version. Just after correctly updated to restart FF, they showed me pictures of a Firefox that's nothing like what I have. Why? Is it just because I use Windows XP instead of Vista/7? Why can't the brilliant new

  • Realtek NETWORK card

    I have a 520-1000z Touchsmart has been upgraded from the original installed Windows 7 Home Premium 64-bit for Windows Pro 8.1 (new installation).  During the upgrade, I lost the Realtek NIC (does not appear on the Device Manager).   Wireless works pe

  • webcam Toshiba L500

    Hi, I have a problem on my toshiba L500 webcam, the problem is when I turned there is a message "device not connected" How can I fix? Thank you

  • Setting the Date & time of printer

    Using the integrated Web server, the time displayed is 4 hours later at the present time. I walked at the exact time in the hh: mmS format but when he chooses to apply, I get an invalid format error. I have a printer HP Officejet Pro 8600 N911a. When

  • Error event 4

    I'm getting this on multiple machines, I checked to see if there are the same name of server accounts, but there isn't. Any idea? Journal: SystemType: errorEvent: 4Alarm hour: 2016-10-03 12:39:03ZEvent time: 17:38:02 UTC 3 October 2016Source: Microso