problem in T500 bios version

Hello world! Update my bios with bios update utility to version 3.23, and my problems began. First my t500 began to enter the mode "sleep" at random, after registration to the event viewer, it is ahci code 13. Second problem is very strange, the display decreases intensity and brightness down more down, the laptop is in the sector and battery is ok, after 4-5 seconds, it goes to max brightness, can be power plans go wrong, I don't know. Third problem, it's a blue screen and after verification, the problem is with the wifi card. With previos version of the bios, I have no problem. My question is how to pass the version of the bios, or is it more recent than 3.23? My bios version is 3.23 (6fet93ww)

Hello

Older versions of BIOS are at the bottom of the page.

http://support.Lenovo.com/us/en/products/laptops-and-netbooks/ThinkPad-T-series-laptops/ThinkPad-T50...

Z.

Tags: ThinkPad Notebooks

Similar Questions

  • Re: BIOS version 3.30 Tecra A11/M11: problems with Ubuntu systems?

    I just got the updated BIOS version 3.30 on my Tecra A11/M11 invitation.
    I'm still under Win7 now, but plan to add a dual boot with Ubuntu when the next LTS strikes in April.

    Is anyone having problems with the new BIOS?
    Should I upgrade or leave intact 3.20?

    I don't find any evidence of trouble with 3,20.

    Why upgrade BIOS if everything is OK?

    In addition to as much as I know that Toshiba can't stand not the Linux operating system, and I doubt that the new BIOS would improve any Linux performance so, if you are satisfied with the version 3.20, stay with that

  • z620: problem with the latest version of the bios z620

    I upgraded to the latest version of the bios (from 3.87) 3.88 and now every time you start, I get the following error.

    unscheduled thermal sensor

    and I have to press f1 to continue. help please

    HP has released a notice of proceedings to:

    http://h20565.www2.HP.com/hpsc/doc/public/display?sp4ts.Oid=5225033&docid=emr_na-c04743732&docLocale=en_US

    Please follow the instrution in the RESOLUTION.

    -Updated system BIOS version 3.88
    -If you receive the F1 prompt for "Sensor heat not programmed", follow the steps below:
    1. remove the system current alternative
    2. press the power button before bleeding off the coast of the remaining kinetic energy is stored. Continue pressing until no lights appear on the front power button / LED.
    3 connect the cable ca system and press the power button.
    4. If the problem persists, contact HP support.

  • T500 bios which versions? flashing or not?

    Hello lenovo community users.

    I have a questions about my t500 bios.

    When do you need to level or to Flash your bios?

    I flashed once, but I don't really know why and if it has done anything.

    can I upgrade the bios back to default settings?

    Thanks for a response

    Generally, you don't have a need to Flash your bios unless the changelog lists a fix for a problem you are having, or if you are instructed to do so by technical support.

    On the other hand, I always keep my systems until the current level more by habit, on workstations where you frequently upgraded hardware or processors, it is should be always running the latest bios.  On laptops, which is not the case, since the material is relatively static.

  • Lenovo: Please bring T500 BIOS update with T400

    Another Member of the forum has recently reported that they were installing BIOS 2.12 on their T400. I thought: it's funny, the BIOS for my T500 is yet to v1.20. By comparing the BIOS T400 T500 BIOS you can see that the versions are parallel, with almost all the same replaces up to verson 1.20. Then the T400 received 4 most recent BIOS, while his apparently poor cousin T500 got NONE. What gives?

    Lenovo: please release of new updates to the BIOS for the T500! It is unfair to the owners of T500 not to put BIOS timely updates. In particular, it seems that the BIOS 2.07 - 1.01 for the T400 can cure a DVI display problem I have with my T500. I'm upset that this fix is not yet available for my T500.

    Version 2.12 - 1.01 of the T500 BIOS is currently available at Lenovo, dated dated 06/04/2009

    http://www-307.IBM.com/PC/support/site.WSS/document.do?sitestyle=Lenovo&lndocid=MIGR-70353

  • HP EliteBook 840 G3: Why BIOS version 01.07 (sp76235) is pulled? (G3 EliteBook 840)

    Anyone know why the BIOS version 01.07 (sp76235) for EliteBook 840 G3 is taken?

    Link to the BIOS:
    http://h20564.www2.HP.com/hpsc/SWD/public/detail?swItemId=ob_167436_1 & swEnvOid = 4054

    The date is 1 January 3000 so he has obvisoly something wrong and HP do not want to install, I have deployed it to a large number of machines and would like to know what kind of questions, it is hoped.

    A new version 01.10 came out with these fixes:

    -Fixes a problem that causes the display to become visually distorted (flicker).
    -Fixes an issue where a system running Windows 7 with active hard drive encryption is unable to power (boot) after the BIOS is updated.
    -Prevents the BIOS downgraded below the 1.09 version.

    NOTE: After loading the BIOS version, older versions of BIOS may not be installed.

  • Problem starting the BIOS NB10t-A-101

    I just bought a NB10t to the United Kingdom and try to boot to a bootable USB key

    I noticed that the BIOS on this particular model is UEFI mode only, which, in itself, is not a problem because users can sign their own operating systems with a certification authority and use them, but this laptop refuses to boot from any external environment... or even to provide an error message.

    I changed boot priority in the BIOS and USB moved up
    I disabled the Secure Boot option in the BIOS
    I tried all 3 USB ports as well as 3 different drives (NOTE: THESE WORK FINE ON the 3 OTHER SYSTEMS, a dell desktop/laptop computer and a computer acer laptop)
    I also tried different distributions (Debian & Arch)
    I used several installation methods (hard install of Unetbootin/Full/Rufus etc...)
    I tried all your currently released BIOS versions (delivery with V1.0, V1.1 - Jan Feb - V1.2)

    After trying all these when you press F12 at startup, the shows start menu but when you select a device, the system continues to initiate (Win8) HARD drive
    After Googling around, I noticed that you have unlocked 2 BIOS updates I tried all versions of these and still the system refuses to boot in my selected device

    Can we expect more updates of the firmware in the near future? Is there a way to work around this problem to start my chosen OS? Is there an option of CSM?

    The laptop can be started from an external source such as USB flash memory stick but make sure of a few important points:
    A few tips:

    1 - USB key must be in the right port (USB2).
    2 - USB key must be UEFI-bootable (a Debian or Ubuntu, Installer copied on the USB stick with 'dd', is very well).
    3 - Bootloader file must be named boot/bootx64.efi (again, a picture of the Debian or Ubuntu installer will be already OK).
    4 - now try the ESC key before and during hit the power button, to select the boot device.

    Here, I found another thread on this topic:
    https://Forum.Toshiba.EU/showthread.php?75759

  • Problem of updating BIOS on Satellite Z30-A-12R

    Hello
    I have a problem when you try to update the BIOS of my A-Z30-12R.
    I currently installed version 2.6 of the bios. My computer had to be reformatted and all programs re-installed. When reinstalling the utility the ECO utility could not be installed due to the incompatibility with the version of the bios that I use.
    When you try to update the bios, the new version is 4.2, but trying to download it and apply it, it says that my computer is not supported.
    Is it possible to update the bios? Why I have a problem with the new version?
    Thanks for your help.

    If you have Win7: install Toshiba Value added Package.
    If you have Win8/10: install the driver of Toshiba system and system settings.

  • Hi all, I need a little help to try to solve a problem of updating Bios for a long time.

    I downloaded the new update of the Bios on the HP site. But when I try to install the update, the process goes up to only while it presents me with an error. Any help would be appreciated, I am trying to upgrade the Bios for the new firmware in order to perform a better processor. Thank you...

    Error code: 3033

    "GoTo" label not found

    on line 89 of w:\patches\i...ate\windows\installer.wbt

    My system is...

    Compaq Presario SR1339uk

    Serial number: CZB5050HBW

    System number: PS267AA

    Motherboard: Asus PTGD1 - LA

    BIOS version: 3.13 12/14/04

    Operating system: Windows XP Home Edition

    Not sure what's going on here, but here is a suggestion on how to properly install manually the update of the BIOS.

    Assume that you download SP26760.exe (BIOS 3.28)

    Start the update - go to the last message you get before it fails and stop. (must be where it prompts you to close the applications and will be saved).

    Open a DOS (command prompt).    You must be an administrator - so if you're running Vista or Win7 - make sure that 'run as administrator ' at the opening of the box.

    Once in the BACK, type:

    CD FOLDER

    go the the directory of temporary files.

    Then make a

    DIR /S 328.LE ROM

    to find the directory where the update files are located.    Type CD < directory name > to go in this directory (on my system, it was a folder called pft467D.tmp, but it might be different on your)

    CD pft467D.tmp

    Now manually invoke (the prompt back, no windows or the windows file manager) the update, with the appropriate switches.  By omitting the switches can cause other problems, as have reported activation of Windows problems.

    AFUWIN /i328. ROM /pbc

    For reference, on my system, here's what I saw in these folders:

    C:\Users\sumsolstice\AppData\Local\Temp\pft467D.tmp > dir

    Volume in drive C is DRIVE_C
    Volume serial number is FE8F-4AA6

    Directory of C:\Users\sumsolstice\AppData\Local\Temp\pft467D.tmp

    26/04/2011 11:11 < DIR >.
    26/04/2011 11:11 < DIR >...
    24/01/2006 15:31 524 288 328.le rom
    01/07/2004 10:54 53 248 AFUWIN.exe
    01/07/2004 10:54 amifldrv.sys 6 912
    21/02/2006 18:08 526 374 Installer.exe
    09/05/2006 17:10 sp26760.rtf 1 784
    11/04/2005 10:55 398 696 WBDEG44I. DLL
    6 file (s) on 1 511 302 bytes
    2 dir 110,361,944,064 bytes free

    C:\Users\sumsolstice\AppData\Local\Temp\pft467D.tmp > AFUWIN i328.rom /pbc

    It should work OK, however no guarantee if there's something else - but essentially - that's what the installer should do.   If this does not work for you - I wouldn't try to force things - you can make a good motherboard unusable quickly.

    For those who are looking to this announcement - the syntax is for this motherboard only - switches may be different for different motherboards.

    Good luck.!

    -DM (while I am an employee of HP for a long time, the comments/suggestions here are my own, not those of my employer).

  • Satellite A500-1E4 (PSAR9E) - noisy fan stops is never (BIOS version 1.60)

    Hello from the Czech Republic, I have also problem with noisy fan on my new Satellite A500-1E4 (PSAR9E) (i430M, GT330M) on 64-bit Windows 7 over Office Standard - see http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=46719&start=165&tstart=0.

    Today I have updated the bios to 1.60 (from 1.20) and there has been no change. When the laptop powered to the top of the adapter in all modes the fan is running at 60-70% (sometimes at 90% - my office is perhaps quieter :-(). What laptop power battery in normal fashion fan and high performance race to 60-70% (loud sound) and in the economy mode to 80% (very noisy). It's crazy that in economic mode produce more noise than mode high performance. The CPU temperature is cca. 37-43 C, GPU 48-57. Fans of course never stops and all it's standart office. No intensive work or games. I can't imagine in games.

    Can someone help me please, I'm really helpless. Or this fixes only bios 1.30 and next version not?

    Hey Buddy,

    I think that it of really difficult to say why this happens, but in my opinion you should provide more details about your operating system and drivers.
    Are you running the Toshiba factory settings or you have installed another OS?
    Fan sometimes high activity is due to a different display driver. Have you installed the latest display driver form Toshiba (NOT nvidia)?

    Old BIOS versions, you can get an authorized service provider

  • Tecra M7: Various errors after upgrading the BIOS version 3.30

    After that I updated my bios to 3.30 I have the following problem:

    -A edge wireless turns off after a while and can not be activated until I restart.
    -Battery information is wrong. I tested the system, I can use 1 hour after he said that my battery is 0%

    How can I solve this problem? I have to downgrade my bios version?

    Kind regards.

    Hi mate,

    Let's see if my advice would be useful for you:

    1. try to reinstall the driver by downloading the latest version of the driver on the Drivers Toshiba download site. What you could also try is to disable the powermanagment for the wireless network adapter. (Just go into Device Manager, find the wireless card, and that there should be an option with a checkbox to disable)

    2. it's really rare, never heard talk about this issue. One idea would be to change all the parameters powersaver to your machine so that the battery will empty without entering in the day before etc... Just let the machine work until the battery is empty. Then remove it for about 1-2 hours, reattach and start windows. The battery should indicate 0% and then you leave the machine to load the battery. (the machine must be turned on). I hope that the battery must show it s correct percentage after you complete these steps.

    Welcome them

    PS: Please write again if it worked

  • Problem of updating BIOS on Satellite M60 - 175 - error rom size

    Hello

    If anyone can help!

    Tried to update my bios M60-175 with toshiba bios downloads but size rom error receiving while trying to flash rom
    my current bios; version toscpl-6040000, 1.00parttblx, smbios v 1.04

    Thank you

    Please check this Toshiba FAQ document about;

    + I can't update my BIOS with the function BIOS Phoenix-file ZIP Windows XP Windows. +
    + I always receive following error message: the size of the ROM file is incorrect. +

    http://support.toshiba-tro.de/KB0/TSB59014X0000R01.htm

    It should help to solve this problem

  • BIOS version 1.60/1.40 for Satellite M30 742

    I'm looking for these Satellite M30 742 of the BIOS versions: v.1.40 or v.1.60.
    I need to install from a bootable cd .iso files.
    Can someone help me?

    Thanks in advance!

    Hi photo

    I read you another topic and it is very good news that the problem is solved after the BIOS update.

    I hope that you won't have this problem again.

    Good bye

  • Update BIOS version 1.55 for the hard-to-find S540!

    I discovered by chance that today there is an update of the BIOS for the Thinkpad S540 at the link:

    http://support.Lenovo.com/en_GB/downloads/detail.page?&docid=DS038373

    This is the version 1.55, released on 12 May.

    .. .and even if I go to drivers in general download page for the selected as the portable S540 concerned and looking at the BIOS available in the list of available software and drivers, it is still the old one version 1.54 of 12 March and not the new BIOS version 1.55 may 12 as in the link above!

    I think that there is a problem of updating web pages at the Lenovo site downloads?

    It seems that Lenovo support web pages are updated now so it's resolved.

  • Complete description of the BIOS Version 1.40 - WIN for Satellite L300-1BB

    Somewhere, anyone can find the full description of the bios BIOS Version 1.40 - WIN for the L of Satellite series, which was the site of toshiba on the date 01/14/09. Why should I do this update for my machine?
    Kind regards.

    Hello

    I didn t find details changed in the BIOS update on the page of Toshiba Europe.
    I assume that Toshiba does not provide this information

    However, if your laptop runs without a problem, then I would not update anything you know
    I'm always that notice; never change a running system. And that's the best advice I've ever heard.

    PS: You're talking about L. Satellite... what Satellite L do you have exactly?

Maybe you are looking for

  • iTunes completely unusable 12.3.3.17

    Since the update to iTunes 12.3.3.17 I had any other problems.  Either it does not start, crashes as soon as I try an action if it boots, or accidents shortly after start playing a song.  All the problem signatures look like this: Signature of the pr

  • Pavilion 6710f: upgrade to 3.0 in desktop pavilion 6710f usb ports?

    I have a hp pavilion p6710f desktop that has 4 usb 2.0 ports on the back, & 2 front. is it possible for me to install usb 3.0 ports in whole or in part? or just add them (which would be better)? Thank you!

  • Cannot retrieve files with vista home premium

    I wish everyone help to make this simple, I found no answers on the net - when you want to decompress files/folders, my menu doesn't include files 'extract all' on my vista program.  Why wouldn't be - and it is not logical that I have to ask this whe

  • Windows Media Player does not load on my desktop HP H8 - 1080t

    Windows Media Player does not load on my desktop HP H8 - 1080t.  I'm using Windows 7 OS.  When I click the icon, I get a small flash, and that's all.  Thank you.

  • Need some explanations on the alternative entry points

    Hello world. I'm rather new to BB development, as well as to development in general. Just trying to get how everything works and sometimes unable to understand. I already have a request. For now, it only uses one main screen, no matter go, where it i