Problem in the JMS Quota

Similar Questions

• Satellite Pro L20-someone ' one can tell me if I have a problem with the screen?

  Hello

  I have a Pro L20 - PSL25E and I recently had problems with the screen, it was intermittently flickering/lose color and whiting almost (when the color fades white vertical lines begin to appear).
  This seemed to worsen after that I dropped it (only from about 2 feet off the ground, not a big drop).

  I thought that the sceen can go, but the performance of the laptop seems to be affected when this happens, the laptop started to run very slow (tracks mouse slowly, programs I clicked take ages to run and it freezes sometimes to stop flashing) that had me thinking that it might be a virus or performance problem.

  My screen, drivers are updated, I did a full scan with McAfee, ran a clear-up system and a Defrag.

  I was wondering if anyone knew if it seemed to be a problem with the connections of the screen and would need replacement or if it could be repaired or if it were a performance problem?

  Any help would be great thank you appreciate!
  Rebecca.

  Looks like the graphics chip has a problem, which I think is a motherboard replacement.

  You can get a quote for repair to an authorized service provider. There is a list of ASP on the Toshiba site.

• Problem with the links in my emails outlook express

  I have an OS XP service pack 2, with outlook express.  My mail is in outlook express, but my wife gets his mail through yahoo.  We both receipt of emails from sereral from a friend with links to the url included in the e-mail.  When she clicks on these emails in his yahoo account link comes right up.  However, as a week ago, all the links that are in the mails that I opened in outlook express, they do more nothing when I click on them - no error message nothing.  Anyone has an idea why links open if I opened an email in yahoo but not if I open an email in outlook express?  And what could be the fix for this?  I never had this problem until about a week ago. Thank you.

  This is common and can happen at any time. Often, the last point mentioned here is the fix.

  Hyperlinks do not work in Outlook Express or in Word (revised 29-Apr-09)
  http://support.Microsoft.com/kb/823301

  Hyperlinks do not work in Outlook Express after you put upgraded to IE7 [or IE8] (revised 29-Apr-09)
  http://support.Microsoft.com/kb/929867

  If still no joy:

  With the permission of MVP Frank Saunders. [RIP]

  If nothing happens when you click on a link:
  Open Windows Explorer or on the control panel.
  Go to tools | Folder options | Types of files.
  Scroll to [NONE] URL: Protocol HyperText Transfer (shortened NOTURL:Internet) and select it.
  Click Edit or advanced, depending on your version of Windows.
  Choose 'open '.
  Click on change.

  "Application used to perform action" should read:

  "C:\PROGRAM may EXPLORER\iexplore.exe" - nohome (check the path to)
  Iexplore.exe to ensure that it is correct and use the double quotes).

  DDE should be checked and in the boxes below, you should have:

  #1:
  « %1 »,,-1,0,,,
  #2
  IExplore
  #3 (white)

  #4
  WWW_OpenURL

  Protocol URL: HyperText Transfer with Privacy should be the same.

  If the foregoing is correct, uncheck the box: use DDE.
  

  Bruce Hagen
  MS - MVP October 1, 2004 ~ September 30, 2010
  Imperial Beach, CA

• Problem with the Canon LBP 1120 printer installation driver

  Hello

  I have a machine running 64-bit vista Home premium. and I have a Canon LBP-1120 printer. This printer is in good shape and I don't want to buy another printer.
  But the problem is that the only driver that there is, is for Vista 32 bit. And when I try to install, I get the error message saying that I need 64-bit drivers.
  I'll be happy even with basic print function because I do not do more printing.
  Looked everywhere on the web... good .no
  A workaround solution would help me a LOT!
   
  I found this, but the link does not work
  [Quote]
  Hello

  There should be a Vista driver for it that will at least at the base
  print function, although it does support all of the features:
  https://winqual.Microsoft.com/hcl/PR...P-1120&OID=191

  [/ Quote]
  Hello
   
  1. are you able to print successfully?

  3. What were the recent hardware changes performed on the computer before the question software ro?
   
  A Windows Vista 64 Bit operating system is compatible in installation of 32-bit drivers. All the 64-bit version operating systems have the ability to run 32-bit applications, but on a version 32-bit operating system, you are limited to only 32-bit software.
   
  According to the information on the website of Canon, Canon provides only the 32-bit drivers for Canon LBP 1120 printer, 64-bit drivers are always expected. To improve assistance to the topic to download driver 64 bit I ask you to contact Canon.
   
  http://www.USA.Canon.com/Cusa/support
   
  Canon LBP 1120 32 Bit drivers
  
  http://software.Canon-Europe.com/products/0000524.asp
   
  For problems with the installation of the printer drivers 32-bit in a 64-bit Vista system, you can go through the resources in the following article and see if it helps:
   
  Error message when you try to add a printer driver 32-bit on a 64-bit print server: "the folder you specified contains a compatible software driver for your device.

  http://support.Microsoft.com/kb/979385

  Please see the link for more information about the issue mentioned.

  Installing the driver for 32-bit and 64-bit platforms

  
  

  http://msdn.Microsoft.com/en-us/library/Windows/hardware/gg463027.aspx
  

  
  

  I hope this helps.

• Problem with the network connection Wireless since installation of win 7.

  I ve just installed Windows 7 last week and no problems until yesterday when all of a sudden my laptop can´t to connect to my wireless network... Strange because my Iphone can't, so it seems like there is no problem with the network.
  And the funny part is that when it detects one network different, other than mine, it connects and works very well!

  I ve tried unplugging the laptop and Wi - Fi connection, but it just says that it can´t to connect to the network... He finds it, but when I click on connect it says only: No..

  What to do?

  Hi KlinzmannFussballspielerin,

  Welcome to the Microsoft Answers community.

  Before you try the procedure below, change the security settings for the firewall at various levels and check if the problem persists.

  I suggest you to update the network drivers.

  Steps to update of network driver:

  1. click on the Start button.

  2. in the search box type devmgmt.msc, and then press ENTER.

  3. Select the network device and right click on it

  4. now, select Properties.

  5. in the Properties window, on the driver tab, click Update driver.

  6. After installing the updates, restart the computer.

  For more information visit http://windows.microsoft.com/en-US/windows-vista/Finding-drivers-What-to-do-when-your-hardware-wont-work-with-Windows-Vista

  To solve your problem, try to turn on network discovery. To do this follow the steps below:

  1. Open advanced sharing settings by clicking the Start button, then Control Panel. In the search box, type network, click Network and sharing Center, and then, in the navigation pane, click on change settings for sharing advanced.

  2. click on the chevron to expand the current network profile.

  3. click turn on network discovery and then click on save changes. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  To learn more about this feature, please visit the below mentioned link:

  http://Windows.Microsoft.com/en-us/Windows7/what-is-network-discovery

  If the problem persists then I suggest you to reset the network adapter settings. Then follow the steps below

  To reset the stack TCP/IP go to this article and either click on "Fix it for me" or follow the instructions to fix it yourself:

  http://support.Microsoft.com/kb/299357

  Disable the IP helpdesk:

  1 hold the Windows key and type R, type "services.msc" (without the quotes) and press enter

  2. scroll down to the IP assistance service, right-click on it and select Properties

  3. in the drop-down list box that says "Automatic" or "Manual", set it to disabled and then click 'apply '.

  4. then click on "Stop" to stop the service from running in the current session

  5. click on OK to exit the dialog box

  Disable IPv6:

  Try to uninstall IPv6 on all interfaces, the removal of virtual cards of IPv6 and reset the TCP/IP stack. To remove the IPv6, go to the properties for each network adapter, and deselect the check box next to the Protocol "Internet Protocol version 6 (TCP/IPv6), which will turn off, or select it and click on uninstall, which withdraw power off the computer.» Then go into Device Manager and remove any 4to6 adapters, adapters miniport WUN or tunnel adapters.

  NOTE: You should do this for each network connection.

  Disable the DHCP broadcast flag: link: http://support.microsoft.com/default.aspx/kb/928233

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  http://support.Microsoft.com/kb/322756

  (How to back up and restore the registry in Windows)

  Windows Vista cannot obtain an IP address from certain routers or some non-Microsoft DHCP servers

  To resolve this issue, disable the DHCP BROADCAST flag in Windows Vista. To do this, follow these steps:

  1. Click Start, type regedit in the search box, and then click regedit in the list programs.

  If you are prompted for an administrator password or for confirmation, type your password, or click on continue.

  2. Locate and then click the following registry subkey:

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\Interfaces\ {GUID}

  3. in this registry path, click the (GUID) subkey that corresponds to the network adapter that is connected to the network.

  4. on the Edit menu, point to new, and then click DWORD (32-bit) value.

  5. in the new area #1, type DhcpConnEnableBcastFlagToggle and press ENTER.

  6 right-click DhcpConnEnableBcastFlagToggle, then click on modify.

  7. in the value data box, type 1 and then click OK.

  8. close the registry editor.

  By setting this registry key to 1, Windows Vista's trying to get an IP address using the BROADCAST flag in DHCP Discover packets. If that fails, he will try to obtain an IP address without using the BROADCAST flag in DHCP Discover packets.

  Hope this information is useful.

  Let me know if it worked.

  Thank you, and in what concerns:

  Umesh P - Microsoft Support

  Visit our http://social.answers.microsoft.com/Forums/en-US/answersfeedback/threads/ Microsoft answers feedback Forum and let us know what you think.

• Problem in the downloaded CSV file

  Hello

  I have a problem in the CSV file downloaded using the IR report. but the problem is at the opening of the CSV, its zeros the decimal. For example, 1.10 becomes 1.1

  It is a column of type varchar, whose number. CSV if I use double quotes for the average number of what it will become a character (= "1.10") = 1.10 instead.

  I have a custom procedure to download the CSV as download IR.

  If I open the CSV file in Notepad or any other editor means that the values appear correctly.

  Can we resolve this problem through our custom procedure? How to solve this problem?

  Please give me your valuable contributions on it.

  Thanks in advance,

  Lacombe

  You are correct Nicolette. This is a problem in Excel, y at - it another way to solve this problem through PL/SQL. while I came up with this question.

  I did a workaround solution in excel to display the correct value without the zeros. Problem is now solved.

  I think that there is no other way to solve this problem of PL/SQL.

  Thank you

  Lacombe

• Problem with the HP dv9000 Laptop

  Here's the question. I turn on the laptop and the screen stays completely black. The projector must enter on however I don't hear anything in the laptop running (ie the fans etc.)

  I have not yet tested it on an external monitor, but will be soon.

  I guess the problem is the motherboard and I need to replace it. Does anyone have helpful advice.

  There are known problems with that model, call HP and quote the following article:

  http://support.HP.com/us-en/document/c01087277

  If your problems are one of the symptoms listed, they should fix it for free.

  See you soon,.

  r.

• While the configuration of the JMS driver had error (caused by: java.lang.ClassNotFoundException: Files\Java\jdk1.6.0_45\bin\gmailcer tstore.jks)

  Hi all

  I have trid to configure the JMS

  -> down loaded the OpenSSL for win - 64. and configured by using the following steps:

  --> To open the certificate: openssl s_client-connect smtp.gmail.com:465

  -> certificate (mailsmpt.cert) copied to the location of the JDK,

  -> in compond to guest Ececuted certificate, after moving to the location of the JDL, it succeeded.

  -> I have before the JMS driver in Em console after recording, I had attached to the server, I get the following error.

  Exception in thread "main" java.lang.NoClassDefFoundError: Files\Java\jdk1/6/0_4

  5\bin\gmailcertstore/jks

  Caused by: java.lang.ClassNotFoundException: Files\Java\jdk1.6.0_45\bin\gmailcer

  TStore.JKS

  in java.net.URLClassLoader$ 1.run(URLClassLoader.java:202)

  at java.security.AccessController.doPrivileged (Native Method)

  at java.net.URLClassLoader.findClass(URLClassLoader.java:190)

  at java.lang.ClassLoader.loadClass(ClassLoader.java:306)

  to Sun.misc.Launcher$appclassloader$ AppClassLoader.loadClass (Launcher.java:301)

  at java.lang.ClassLoader.loadClass(ClassLoader.java:247)

  The main class is not found: Files\Java\jdk1.6.0_45\bin\gmailcertstore.jks.  P

  the program will exit.

  gmailcertstore. JKS file exists in the location of "C:\Program Files\Java\jdk1.6.0_45\bin"

  Thanks in advance...

  This problem has been resolved,

  Actuallly, I installed the Weblogic Server on top of JDK which was in c:\\programFiles\Java\jdk1/6/0_45,

  And SOA server on top of JDK which was in c:\\oracle\middleware\jdk...

  I placed the "gmailcertstore.jks" in c:\\programFiles\Java\jdk1/6/0_45, instead of c:\\oracle\middleware\jdk. causing the problem for me.

  Thank you.

• Error: Invalid Configuration for the JMS adapter

  Hello!
  
  I do a test with the CEP to get messages from a WebLogic JMS queue but I get the following error:
  
  < BEA-2045010 > < the context of the "Test" application could not be initialized: org.springframework.beans.FatalBeanException: error initializing context of life cycle; nested exception is java.lang.IllegalArgumentException: configuration not valid for the JMS adapter, you must Bean or specify a converter or an event type.
  
  Teste.Context.xml:
  
  <? XML version = "1.0" encoding = "UTF-8"? >
  < xmlns = "http://www.springframework.org/schema/beans" beans
  xmlns: xsi = "http://www.w3.org/2001/XMLSchema-instance".
  xmlns:OSGi = "http://www.springframework.org/schema/osgi".
  xmlns:wlevs = "http://www.bea.com/ns/wlevs/spring".
  xmlns:JDBC = "http://www.oracle.com/ns/ocep/jdbc".
  xmlns: space = 'http://www.oracle.com/ns/ocep/spatial. '
  "xsi: schemaLocation =".
  http://www.springframework.org/schema/beans
  http://www.springframework.org/schema/beans/Spring-beans.xsd
  http://www.springframework.org/schema/OSGi
  http://www.springframework.org/schema/OSGi/spring-OSGi.xsd
  http://www.BEA.com/ns/wlevs/spring
  http://www.BEA.com/ns/wlevs/spring/spring-wlevs-v11_1_1_3.xsd
  http://www.Oracle.com/ns/OCEP/JDBC
  http://www.Oracle.com/ns/OCEP/JDBC/OCEP-JDBC.xsd
  http://www.Oracle.com/ns/OCEP/spatial
  http://www.Oracle.com/ns/OCEP/spatial/OCEP-spatial.xsd ">."
  
  < wlevs:event - type-repository >
  < wlevs:event - type the type name "Pet" = >
  < wlevs: class > testewithprotobuf. MyPet$ Pet < / wlevs: class >
  < / wlevs:event - type >
  < / wlevs:event - type-repository >
  
  < wlevs: adapt id = "pet_messageAdapter" provider = 'jms-entrants' >
  < wlevs:listener ref = "pet_inputChannel" / >
  < wlevs:instance - name of the property = "converterBean."
  REF = "PetMessageConverter" / >
  < / wlevs: adjust >
  
  < wlevs: channel id = "pet_inputChannel" - type of event "Pet" = >
  < wlevs:listener ref = "pet_messageProcessor" / >
  < / wlevs: channel >
  
  < bean id = "PetMessageConverter" class = "testewithprotobuf. PetMessageConverter"/ >
  < bean id = "PetBean" class = "testewithprotobuf. PetBean"/ >
  
  < wlevs:processor id = "pet_messageProcessor" >
  < wlevs:listener ref = "pet_outputChannel" / >
  < / wlevs:processor >
  
  < wlevs: channel id = "pet_outputChannel" - type of event "Pet" = >
  < wlevs:listener ref = "PetBean" / >
  < / wlevs: channel >
  < / beans >
  
  My converter class:
  
  import java.util.Collections;
  import java.util.List;
  
  Import javax.jms.BytesMessage;
  Import javax.jms.JMSException;
  Import javax.jms.Message;
  
  Import testewithprotobuf. MyPet.Pet;
  
  import com.bea.wlevs.adapters.jms.api.InboundMessageConverter;
  import com.bea.wlevs.adapters.jms.api.MessageConverterException;
  import com.google.protobuf.InvalidProtocolBufferException;
  
  / public class PetMessageConverter implements InboundMessageConverter {}
  
  @SuppressWarnings ("rawtypes")
  @Override
  conversion of public list (message Message) throws MessageConverterException.
  JMSException {}
  
  BytesMessage, bytesMessage = message (BytesMessage);
  
  long bodyLen = bytesMessage.getBodyLength ();
  ubyte [] buffer = new byte [(int) bodyLen];
  
  bytesMessage.readBytes (buffer);
  
  try {}
  Pet animal = Pet.parseFrom (buffer);
  
  Return Collections.singletonList (pet);
  
  } catch (InvalidProtocolBufferException e) {}
  throw new MessageConverterException (e);
  }
  }
  }
  
  Please, what is the problem?
  Thank you!

  This error usually indicates that you have two type of event and bean converter specified or not specified. In your case, which does not seem the case by looking at the source file. You could also paste the contents of your configuration of the directory META-INF/wlevs file?

• Problem with the path of the current script and applescript

  Work in cs3 here

  Here's what I'm trying to achieve. I wrote a script in javascript, but I need the support of shell for some features. I can only run applescript shell so I'm able to run the shell script quite easily to applescript, as long as I have hard the path of the code in the applescript.

  It stops working when I get the activeScript path and then try and pass it in applescript.

  Here's what works

  < code >

  "myScript = 'do shell script \"/users/my_username/myScript.sh\' &------"------" & point 1 of arguments and return. "

  myParams = ['param1'];

  var result is doScript (myScript, ScriptLanguage.applescriptLanguage, myParams);.

  < code >

  It works fine, however I would like to have the shell script live in the same folder as the scripts Panel, so it is easier for others to install

  So here's what I tried to do

  < code >

  myScript = app.activeScript var;

  var thisPath = myScript.path + "/ myShellScript.sh";

  "' myScript =" do shell script------"" + thisPath + "------" &------"------" & point 1 arguments and return. "

  myParams = ['param1'];

  var result is doScript (myScript, ScriptLanguage.applescriptLanguage, myParams);.

  < code >

  It produced an error that says: Indesign can't find the file.

  So I tried to escape all spaces with a replacement of the chain, as follows:

  < code >

  scriptPath var = "\" "+ thisPath.replace(/%20/g,"%5C%5C%20") +" "-" '; "

  < code >

  It still does not work. I also tried to make an object file

  < code >

  scriptPath var = File (thisPath);

  < code >

  Couple other things I've tried include POSIX path in applescript, removing the additional quotes, enveloping the path in quotes.

  It did not work also. Any help would be greatly appreciated that I do not understand what I am doing wrong.

  UPDATE:

  Just after posting, I have corrected this problem. For anyone who wants to know, that's what I did

  scriptPath var = ""' + thisPath.replace(/%20/g,"\\\") "+ '" '; "

• Problem with the organizer for first elements ver 9.0

  For some reason, I can't enter the organizer for my Adobe Premiere Elements 9.0 worm.  I get the error says "the organizer has stopped working", windows can check online for a solution to the problem, or it tells me to close the program.  When I check the details of eyesight problems, I get a list.  Here are some quotes: problem event name: APPCRASH application name: PhotoshopOrganizerElements.exe

  Timestart application: 4ca3a3b5 which I do not know what everything means.  Should I reinstall Adobe elements again?   Anya

  I got elements of Prime Minister for about 6 months now and have not had a problem with the Organizer until last week.

  What I have to reinstall the whole program or I should just install the portion of the organizer of the program?

  Anya

  Thank you for responding.

• magic_quotes_off, now this with the single quote in the variables?

  Okay, so I turned off magic_quotes because they go far anyway. Broke one of my pages and the list of items in the table of database that is supposed to appear was not there. So, I opened the recordset on the page and deleted the apostrophes in the recordset object variables and all reappeared. That tells me I should open EVERY single game records on this site and remove the single quotes? Does that include digital as well as text?

  Thank you for your help.

  Brian

  Magic quotes were originally intended to help beginners (and we are all beginners at some point), but found to be murkier than they are worth. I have to admit that the whole quote, addslashes() and stripslashes() functions had confused me for a while, and I found myself with the backslashes in all directions. It's the partition:

  When you create a query SQL in PHP, it must be a string, it must be enclosed in quotes (single or double - is not serious). However, SQL queries must be enclosed in quotes in the text, and the text you type may also contain a mixture of single and double quotes. The idea of magic quotes is that it automatically inserts a backslash before each quotation mark in a string, which makes the single quotes or double in safe to put in a SQL query text. When you pull the text from the database, you use stripslashes() to get rid of the back-slash.

  The problem is that magic quotes can be disabled, so many books and tutorials tell you move your text to function addslashes() before putting the text in a database. If magic quotes are still on, you end up with two backslashes instead of one. Nightmare. That's why magic quotes are underway.

  Rather than use the addslashes() and stripslashes() functions, it is now recommended to use mysql_real_escape_string() or prepared statements. Given that Dreamweaver does not support prepared commands, I'll leave them out of this. Whenever you pass a variable to a SQL query in Dreamweaver, it passes through the GetSQLValueString() variable, which can detect if magic quotes are enabled. If they are, it will use stripslashes() to get rid of the back-slash; and then it passes variables to mysql_real_escape_string() prepare for insertion in the database. All your single and double quotes in the text are preserved and not a backslash in sight.

  The problem is that if you have a text that has been inserted by using magic quotes and/or functions addslashes(). The simple solution is to use stripslashes() to remove the backslashes in the text stored before you post or use it somehow.

  echo stripslashes($row_recordsetName['fieldName']);
  

  I hope that clarifies the situation and provides a solution. If this isn't the case, it may be necessary to purge your database of backslashes.

  The problem with magic quotes affects only text. Numeric fields are not affected.

• Problem with the Oracle text markup

  Hello
  
  I have a problem with the Oracle text markup.
  
  I am looking for keywords in a text which is composed by a question and answer.
  Here is the structure of my text:
  & lt; div class = 'question' & gt;
  & lt; a & gt; the title of my question & lt; /a & gt;
  & lt; div class = "reply & gt;
  content of response
  & lt; / div & gt;
  & lt; / div & gt;
  
  It is possible to search those keywords in the question or answer only. For this, I use the stored procedure:
  
  {call CTX_DOC. MARKUP)
  index_name = >?
  textkey = >?
  text_Query = >?
  restab = >?
  query_id = >?
  startTag = >?
  (EndTag = >?)}
  
  _with these parameters: _
  
  index_name = < my index >
  textkey = < id for the search text >
  text_Query = < a query containing the keywords >
  restab = < a table SQL to store the marked text >
  query_id = < id >
  startTag = ' < span class =-"highlight\" >. "
  EndTag = "</span >.
  
  The markup should be done only in the place you want (question, answer, or both).
  The markup is good when I search a keyword throughout the text, in the question or answer only.
  * If I search two key words in the question or answer, the markup is bad *.
  
  _Example: __
  I am looking for the words "* Internet *" in question only.
  Here's the query passed to the stored procedure:
  + * text_query * = 'service & internet' INPATH (//div[@class = 'question'] / has) +.
  
  In the question, these words are well marked.
  In response, only the first word is marked.
  
  * Why the first keyword is also marked in the response while the query specifies a search in question only? *
  
  The same problem appears when I search for the same keywords in the response only.
  In this case, in the answer, these words are marked as well.
  In the issue, only the first word is marked.
  
  Thanks for your help
  
  Edited by: user11088931 Apr 21. 2009 06:17

  Try text_query = (service & internet) INPATH (//div/a)

  Single quotes in a query do nothing. I think that your request has been treated as

  Service & (internet INPATH (//div/a))

• Since my 10.0.2 upgrade on my iPhone 5 my Wifi doesn't connect anywhere except home! This has never been a problem in the past I have connected everywhere wherever I was going to automatically! Is - this rare?

  Since my upgrade to 10.0.2 on my iPhone 5 my phone only connects to Wifi when I'm at home (cancelling the purpose of a MOBILE phone). This was never a problem in the past a my phone automatically and I received and could send emails, messages and use messenger etc automatically. Is - this rare?

  Hi John,.

  Please visit Apple support communities.

  I see that your iPhone 5 is not connect to other Wi - Fi networks after update to iOS 10. We offer troubleshooting tips.

  Since your wireless network is working, but you cannot connect to other networks, start with the next step in If your iPhone, iPad or iPod touch connects to a Wi-Fi network:
  
  

  Reset your network settings. Tap Settings > general > reset > reset network settings. This also resets the Wi - Fi networks and passwords, cell parameters and VPN and APN settings you used before.

  Sincerely.

• Anyone having problems with the new iPhone LTE connection 7 on Verizon?

  I am now on my iPhone second 7 with Verizon. I had four phones for me and my family. I have now had issues where I have no signal in the same areas where my signal allows to be strong. I can't solve the problem with the activation/deactivation of the airplane and then mode again in normal mode. My phone will rest with no signal for 5 minutes, then going to LTE with three bars. I also had the problem where I had only 1 x signal, while my son standing right next to me has LTE. And he had the same questions, where I'm on LTE and it gets no signal. I use to have LTE where I live and work all the time, now it's spotty at best. Apple has replaced me and my sons iPhones but not luck. Still do. Any ideas or an any other suffering?

  (1) go to settings/cell phone/cellular data Options/enable LTE and select ONLY the DATA. This seems to solve the problem (as a temporary solution) for most of the people affected by this problem. The bad part is your request might not be as clear (since they cannot use the highest LTE signals) and you can make calls and data at the same time. But it does not solve the issue.

  (2) there are rumors (but you didn't hear that from me that we only are not supposed to discuss beta software program Apple in this forum) that the new version of Apple Beta for iOS (which also includes an update of the software carrier Verizon to 26.0) seems to solve this problem. So, there's a light at the end of the tunnel.