Problem in the race's 11g

Hello

I have problem in the management of forms 11g, this problem in java plugin message (this plug-in is not taken in charge), it gives me the browser Google chrome, it was working fine only on Google chrome, but I don't know what happens to make give me this indication can be auto update for Google chrome, or what I do not know...

Environmental information:

OS: Windows server 11g Enterprise 64-bit.

Database: Oracle Database 11 g R2 64 bit.

WebLogic: 11 GR 1 material (10.3.6) 32-bit

Form & reports: 11 GR 2 (11.1.2.2) 32-bit

For java: the system was working with the 1.6_24 jre version after the system stop working and give me this message I tried several things like:

-Change the setting in formsweb.cfg (jpi_mimetype = application/x-java-applet) and try, but give the same problem.

-Version of jre and jdk change (1.8_45, 1.8_40 and finally 1.7_80) I tried every version only way I uninstall all versions of java and try for each version.

Explorers:-Google chrome v42.0.23 (this plug-in is not taken in charge)

-Internet Explorer v8 (an add-on for this Web site has failed. Check the security settings in the options Internet potential conflicts).

-Firefox v36.0.4)

So now I'm in trouble! Help, please.

Thanks in advanse

Daniel was on the right track.  From 42 of Chrome, the Java Plugin is disabled.  It may, however, until September be reactivated.  Refer to the following for details of Oracle:

https://Java.com/en/download/FAQ/chrome.XML

On the question regarding other browsers, consider the following:

1. you should not have more than one JRE version installed on your machine.  You can, but it is not recommended.

2. the jpi_mimetype parameter is used only for non - IE browsers.  For IE, you must correctly set the jpi_classid the value of this parameter will depend on end-users to use version and how certain you want the version to be.  In other words, you can asked exactly the version you want, down to the level or update, you can set this value to allow any version within a particular family.  See the notes 444105.1 MyOracleSupport for more details.

3. If this information does not help to solve the problem, please share the exact content of the error you see.  Actually, it might help, if you have provided a screenshot.

Tags: Oracle Development

Similar Questions

  • 11G with ASM and RDBMS problem when the server reboot (dependencies)

    Hello

    I just install the new version 11G with ASM for the first time. When I restart my server, RDBMS start before the ASM service isn't over to start. It's like when the care services, CSS and EVM have been replaced by the OH dependencies have been lost. The OH service is started but it's as if he is not optional and others start immediately (ASM and RDBMS).

    Early restart, I see the OHservice started and the DSO after that (on the road), but when the RDBMS starts the instance handle of stay (inactive and not mount) because unit number logic for the catalog of service is not available yet. I see in the alert.log to RDBMS catalog segment is not found or not existing (/ catalog not nfound).

    If I wait about 3 to 5 minutes and restart only the RDMBS all start without problem.

    Is there a way I can adjust the stop with the 11g version service or use the crsctl to indicate to the RDBMS service start only when all the ASM service (MON) segment are mount?

    Thank you

    Normally the database is started by the clusterware and not by the windows service.

    Thus, there could be 2 ways to do this:
    (a.), try to assign the Windows of the database service to manual. It must be started by clusterware.

    If that doesn't work, try this:

    (b) leaving the service to automatic startup (Windows), but disable the automatic start of the database. This you can normally change in the registry
    -Online-online Oracle-online key HKLM => ORACLE__AUTOSTART
    (not 100% sure on the key, but I'm sure that you'll be able to find it.)

    Unfortunately do not have atm WindowsCluster to try it myself.

    Additional please check if your db instance has the correct dependencies defined in the clusterware.
    Make one

    stat ora res crsctl. .db Pei

    and paste it here.

    So good luck...
    Sebastian

  • What is the problem with the sequences on RAC environments?

    Version: 10 g, 11G

    I've never worked on CARS. But I keep seeing discussions about the problems with the sequences on CCR environments. What exactly is the
    basic question?

    Can be performance issues if you have a large number of sequences of nocache as it may cause heavy IO for the system tablespace.

    Given that each instance will have its own cache seqeuence that some sites are unhappy with significant gaps in the values, this can cause.

    There was also a blocking problem caused by heavy simultaneous new connection activity requiring the issuance value audsid for the session of v$. To solve this just to the top of the cache size to 1,000 or 10,000 by default if you are on a version where the value was not moved upward by Oracle already.

    As far as the first two numbers go that my view is if the sequence does not need to be cached you need not use a sequence to generate value. If you need a value without interval then you need to get your value from a table column value that is part of the transaction and do not use a sequence in a first time.

    Sequences are designed for speed and concurrentcy, and this competition is priced at gaps.

    HTH - Mark D Powell.

  • Problem after 10g to the conversion of 11g with access ODBC application connection.

    We have recently updated one of our databases Oracle 10.2.0.4 on 11.2.0.4.0.  We used Data Pump export of database 10g and the new database 11g Data Pump import.  Everything went well.  We have several users who use an Access database with an ODBC connection to our Oracle database.  We installed 11g on their PC client and install the tnsnames file to point to the new database 11g.  We have a configuration read only account that everyone uses to connect to the Oracle11g database through the Access application.  We have a user who gets an error, even if this computer has been installed just like everyone elses.  She becomes an odbc error, that the account is locked.  I had the read-only account on our database 10g locked, so everyone would be forced to use the 11g database, because we could not completely stop the 10g database.  We have searched the c:\ drive and you can find 1 tnsnames file and it is directed to the new database 11g.  However when we unlock the account read-only on the 10g database, access works very well.  It is as if she is always directed to the 10g database, but we cannot find any link to it.  This user can also connect another pc that the ODBC connection to server 11g works with the access application and it does not work with them connected.  Any help would be appreciated!

    Our resolution is a slight reorganization of elements of Oracle in the Environment Variable Path in system settings Desktop/Properties/Advanced to ensure that the proper path containing the precise tnsnames.ora file was represented was just what he needed.

  • I get a message saying that firefox has prevented the dangerous 'adobe flash' plugin of the race

    my flash player IS up-to-date, but firefox crashes and I get this error message
    Firefox prevented the dangerous 'adobe flash' plugin of the race (some im webpage on)
    Let me know how I can fix this? AS SOON AS POSSIBLE

    Hi Janetc69,

    I had the same problem, after having informed me with a few mags of PC online, I simply uninstalled Adobe flash player in my laptop.
    Since then, I got no problem with playback of videos with firefox browser. What more, it seems to work better than before.
    Anyway most of the browsers are slowly remove Adobe flash player on their systems.
    If this does not work you can always reinstall Adobe, try it.

    Good luck!

  • Satellite A300 power suddenly goes out during the race for hours

    Dear users of the Forum,

    I am facing a strange problem in operation.
    My laptop Satellite A300 is suddenly down power during the race for hours.
    It is auto off not exactly. Not the way windows stop, is rather like strength to off (as when I press on & power button to stop force).

    This happens automatically, starting again, the screen saying "windows does not stop properly, start windows normally" is apperanig.

    I suspected virus infection, I tried full scan with nod 32, essential microsoft, kaspesky - 1 by 1 (previous uninstall and install the new), but all the antivirus intremediately scan stopped due to this power off.

    Watch movie also stopped in the Middle, attempted to convert the movie file format also was arrested several times because of this problem of automatic disconnection.

    I tried to run only on the power (remove battery) and got the same result.

    can anyone identify the problem? can you please give me the solution?

    smarjit1

    Hello

    I put t think it is s virus.
    En me it looks like overheating. Eventually the high internal temperature requires the laptop to close. This is done automatically to prevent the equipment from damage
    I'm not quite sure what could cause this exactly, but in most cases the dust inside the fans affects cooling performance and lead to a temperature higher than m.

    Higher temperatures could affect the RAM modules too, and perhaps that is the reason why some applications don't work properly.

    What to say; try to clean the cooling fans using a jet of compressed air and check out how the laptop would proceed

  • I tried to solve the problems to the existing solution in this forum. I still get error 50405

    Dear,

    I use USB-6009 for controlling pumps, valves, and two Mass Flow Control. Each two cycle I get error 50405. I tried to solve the problems in the existing solution in this forum, but the error always showing each cycle 2 of the operation. I enclose my VI filled for the expertise, I was wondering if its design issue? Home shot of the error screen. Thank you.

    You have certainly a few design issues.

    The structure of stacked sequence tends to create more problems than it solves. I the have not used in new programs since version 1.2 of LabVIEW (in 1989). A state machine is a much better choice of architecture.

    Local variables can cause race conditions, copies of additional data, poor performance and it is difficult to debug code. There are special cases when they should be used, but these conditions are not in your code. Just wire directly on the terminals of control at the scene, the data will be used.

    My guess on the likely cause of your error is the use of several DAQ Assistant to perform the same task (with different data values) in each image in the sequence structure. With the arcitecture state machine that I suggested above, you would need one. The DAQ Assistant trying to be clever on the configuration and tasks of closing, but different instances do not speak with each other, so they don't know when to release the resources.  You might be able to do work if you used the DAQmx screw standard you have done with the task of digital output.  You do not connect the error lines of the DAQ Assistant for you can be missing errors.

    Indicators and controls without legend may be a troubleshooting nightmare. Please give each control and seeing a unique label. If you don't want the visible label on the front, you can use the properties of the control to hide. If you want multiple controls to have the same visible text for the operator, use the legend.

    Learn how to use subVIs. Most of the code in the 6 images of the structure of internal sequence is identical. By converting only a Subvi, you would reduce considerably the size of the diagram and if you ever need to modify the code, it should only be changed in one place - the Subvi.

    The while loop in frame 0 of structure of outer sequence is a "gourmet" loop He's going to run as fast as possible and seize all available CPU resources until the user presses a button. Put a wait function (ms) in the loop with expectation of ~ 100 ms. best, learn how to use the Structure of the event for user input.

    The second loop inside of the structure cases inside does nothing and can be removed.

    Many of these objects suggest that you have a programming background using the text-based programming language.  LabVIEW uses a paradigm of data flow that avoids largely for things such as the structure of the sequence and the local variables. I recommend that you work through the tutorials online on the Getting Started with LabVIEW.

    Lynn

  • Problem with the generator requests - run when open always enabled

    When you try to create an application in respect of the source of the file settings: the race when open box is checked and double-check itself after that I have to uncheck. Run the opening is not checked in the properties of VI.

    Found: LabVIEW 8.2.x Upgrade issues

    Search for 'run the opening '.

    The problem has been resolved to the 8.2.1.

    See you soon,.

  • Problem with the generation of two internal counters pulse trains

    Hello

    I do a control of temperature for two heaters, OR 9472 (output module digital), NI 9271 (RTD for measuring temperatures) and cDAQ-9174 chassis. So, I use the internal meter NI 9174 to generate two pulse train on the outputs (I tried with both cases-> pulse continuous and finite). Before that, I have two separate PID.vi, in which each sent the percentage of cycle of obligation for the two tasks of pulse generation (I configured these tasks with the physical channel cDAQ1Mod1/ctr0 and cDAQ1Mod1/ctr1). The problem is when I run the program, because the application initially worked fine, but after a few seconds the communication between the chassis and the application is not respected (no error message, but the external LEDs on the NI 9472 module had been disabled and stopped too NI 9271 module temperature readings). Then I tried to stop it with a 'Stop' button, but nothing happens. After, I abandoned the race and still nothing happened. So, I finished the Labview program with the Task Manager and a message appeared "reset VI: xxxxx". Finally, I have to restart my computer to run the program again. Can anyone help with this please? If you need more information, let me know.

    Kind regards

    Hi Luis,.

    I have the error cluster connected. But I solved my problem in a different way. I don't know why, but when I configured my RTD module with the DAQ assistant to test some of my design in a new file in VI, the RTD module works fine, but if I copy the entire program logic (include my DAQ assistant) back to my main VI folder and run the application, only for communication between my DAQ hardware and my software works there shortly. So I solved my problem set up any device or module in the same file from the application again and problem disappears.

    Thanks for your help.

    Luis C.

  • Problems with the transmission of data between the screws

    Hi all.

    I have a question where my program slows considerably during the race.

    The program is a producer-consumer, where I have the main consumer loops and loops producer for USE comms, measure the output power, input for measuring the power, thermal control, etc..

    Regarding the issue, the measures of output loop takes readings and transmits the data to a separate VI which remains running (measure of output processor). This VI summarizes and on average the data and also displays data for the operator to see details if necessary. The operator shows and hides the front panel of this VI with a button on the main program. This VI also returns the summary data to the main VI, where it is read by my loop of consumer.

    The main measures output VI loop takes about 200mS to run when the program is first started. Less than a minute, it is 400 MS, and it's all downhill from there.

    I've isolated the problem to the way I pass data back (I think). I couldn't find a way to pass the reference of the queue between two screws not connected by wires. I open a reference to the VI processor and use Ctrl Val.Set and Get to pass the data back. If I take the intersection of the Subvi data, there is no slowdown.

    My questions are:

    (1) why the data passing by invoking a node of the control on the target would cause the downturn?

    (2) how would I get/pass information of queue between the two screws are not connected?

    (3) Alternately, could I start the VI processor in my main program, run and pass data in and out of it? I want to keep it running, because it is also part of the user interface.

    I don't know that I have not explained this very clearly. I took some screenshots of my code, but don't see how to download here.

    Thanks in advance,

    Jim


  • How to set the name of the author and where I find all of the debug option token during the race or the creation of the application on QNX IDE?

    How to set the name of the author and where I find all of the debug option token during the race or the creation of the application on QNX IDE?

    Here is the error

    Failure of deployment: Info: request shipment: install and launch
    Info: Action: install and launch
    News: Native debugging: on
    Info: File size: 219949
    Info: Installing com.example.UIBB10AppTest1.testDev_B10AppTest15dd51c62...
    Info: Treatment 219949 bytes
    actual_dname:
    actual_id:
    actual_version:
    result::failure 881 the application author does not match the author token of debugging

    The author information is located in the bar - descriptor.xml in the tab "General". But the information must be defined automatically. In addition, you must install the token debug on your device.

    If everything is configured properly there is only one problem that happened to me. I had several chips debugging Momentics. I had to remove all chips debugging and leave alone the I want to use. Perhaps, you have also several debugging chips installed in Momentics. This seems to be a bug in Momentics who can't handle several chips debugging.

  • I have a problem with the computer is slow and does not file.

    1 of my pc and 1 another laptop, both with same OS - win 7 starter, atom and same ram and Ghz processor.

    The the Task Manager on the two of them performing at about 50%
    I use wifi and same place,
    always pages on my pc are load too late, manyatimes same gmail takes more than an hour to load or load never at all.
    Live TV on my pc crashes a lot and the clarity of the video is too bad, although the same graphics card, wifi, etc. are used.
    Any recommendation to get rid of these problems?
    2. some viruses had infected my pc,
    I tried to scan my pc and the USB with 2 antivirus free and pay different and even contacted the companies and sent them files. But I got no solution.
    On my pc, the files opens, show that a few errors before you open it then on my cell it do not open at all. Only shortcuts are displayed, while the USB is to have 4 GB of data.
    The companies had scanned all files that are intended for them and had recommended some solutions, but none of them worked and I was faced with the same problems.
    It was queries that I had sent to the antivirus company-
    10-20-bitdefender files that are
    > infected. They were initially on my USB, then I connected to another
    > pc. After that, when I connected to my pc, I scanned and that she was
    > no virus. Then the ameliiecouturiaux and the files whatever i seclect opened in a
    > new window and took that wasannoying time. So I copied all the files to my
    > pc, yet once scanned, formatted my USB and then comes the againNow copiedit the
    > problem - all the icons or folders remain the same with the name of the folders but
    > the files inside this foldergot automatically changed and I lost all my
    > data. Now, I can't find any of my files on my pc or my USB. PL send me
    > an email so that I canattach the files and send them to bitdefender. Dungeon of pl
    > secure these files. Some files have an another new error that I had
    > downloaded. More files will be downloaded once I have bitdefender recieveemail to

    > that I can answer. PL copy this message in its entirety and add this to your answer.
    According to my knowledge, 2 of my PC are infected and the virus are not getting detected by bitdefender on my PC1 but 4 threats have been detected on the laptop...
    The same files are include the other way on my other pc.
    Whenever I open the files, save option opens and a new file is saved with the file tha but they never get to open in word or powerpoint, only the backup option is displayed.
    The original files are protected by copyright and are lost. PL help me if possible to retrieve and delete all the files once the inspection is completed. You can forward this message to any authorized person.
    Attached files have changed to 1 or 2 k, but there was initially datas in a few MBs.
    201310131003535. I mentioned that somewhere I had formatted the USB key. Just before that, I had copied all files by selecting CTRL A and cut all the files in a directory on my PC. Then I opened the USB and no files were there. But always around 4 GB has been shown as being busy on the USB stick before formatting.
    My pc takes too long to restart, I tried a few 3 - 4 times and no updates have been installed or waiting to install after the 2nd time but when even he took more time than usual to restart and is compared to the other pc taking 2 X the time to restart, but two of them have installed bitdefender. Problem in my laptop toshiba, not pc lenovo, space time with more than 50 percent on the disk processor and Atom c.
    The files on my USB key are automatically replaced by shortcuts and so files open in a new tab and new cases opened are not those of origin who have been saved by me in this matter. Yet once I formatted and scanned, files, pc and USB but still facing the same USB key.
    Problems-
    1. all files are automatically displayed as shortcuts, even if I had pasted the original file
    2. once I click on open, I get an error and then after clicking on ok, some files get opened
    Before sending the email, I had formatted the USB scanned files on my HARD drive and then copied on the USB. The same problem persists. I think that when the files are displayed or open, the virus does something and change his behavior wrongly.
    1 bitdefender watch as new bitdefender is available, I click ok and repair wire starts and then it tells the system to restart.this cycle continues on the race

    2. 2 files are missing (attachment)
    3. could you send me the file by e-mail?  You can also download the link below.

    http://labs.BitDefender.com/

    because the webste or browsers (chrome, firefox) are not respongding.
    4. I could get these 2 points. Browse your computer to locate the removable storage device and right click
    its icon.
    3. in the shortcut menu, point to Bitdefender and select immunize it

    drive.
    I am able to open my pendrive ffrom on 1 pc but on my laptop, all the files don't appear as shortcuts 1-2 KB and can not access.

    zwhwenever, I click the icon, the window save under opens for all files.
    on this pci usingbitdefender antivirus am more 2013 16.34.0.1913 downloaded from download.com and the antivirus from bitdefender 60 seconds. 1.0.3.59
    my pc shows the USB key as safe, but laptop with 2 antivirus mentioned above are showing 2 virus - worm.vbs.ch (bitdefender 2013)
    using bitdefendr 2013 more on laptop, I tried to immunize the file but an error was encountered.
    the error is in German-
    Der process nicht auf die Datei zugreifen kann, da sie von einem other process verwendet wird. I closed all the files and tried to immunize the USB of the my computer without having to open the USB by clicking on it.
    Itried to remoe and atach the pendriveagain and even restarted the laptop, but the same error message appeared.
    Properties - 5.10 GB ref 7.89 GB, but when the USB wasopened, all files were only 2 or 3 KB of size.
    1 more problem-i tried to delete the files in quarantine but bitdefender stopped working and went off automatically.
    I copied all the files from USB to pc, they were 2.22 GB, then again, I copied them back after scannig and formatting of topendrive and it was only 1.44 GB
    BitDefender Antivirus 2013 never works and always displays the message to restart the laptop so that it can start working, but it neverstarts. But bitdefendeer 60 seconds work.

    LOL - install software Registry Cleaner to fix damaged or broken registry entries.

    More likely to worsen the situation.

  • Bounding box fits in the race, not the path

    I have a problem with framework of selection/scaling. Frame adjusts to the race as its width, not stroke. Probably, I used a shortcut keyboard or clicking on something by accident. Its really annoying, please give me some advice. I have found no advice anywhere in the website.

    I work with Illustrator CS6 on Windows 10.

    .frame adjust.png

    Preferences > General: "Limits use Preview" should be disabled.

  • Line tool misaligned and cannot resolve the race (.dxf exported from sketchup)

    I've been using illustrator for this purpose for many years still today when I try to draw lines to complete the .dxf exported from sketchup lines lines and to her are still perhaps 1/8 ". Also, I can't set the race of 1 PT. LMK if someone had this problem and if you do not see the file I'm working on I have the link below.

    Thank you

    Gro FloorPlanBase 4.28.ai - Google Drive

    OK had to use turn off my dark cookie and use google chrome to get your file.

    So you can see that some parameters are set to align on the pixel grid, and after the name in your window you have RGB.

    1. Click on the dashboard to align to grid of stack and change the empty box
    2. File > Documents color Mode > CMYK
    3. Transform flyout, unchecked align new elements to the network stack

    This can happen when you make a new document and web document profiles has been used, or some gave you the file in this way. In the screenshot below you want to watch for change RGB to CMYK and snap to grid of uncontrolled battery

  • Problems with the Brush tool in Animate - chips of leaves or steps of the finished line.

    Noticed this problem with the Brush tool in Adobe animate - seems to leave a chip or stage of the race over each time that a line is drawn.

    Older versions of flash were perfect, no problems with the brush not tool at least.

    See the video for a demonstration of what I mean:

    Adobe animate (do Flash) - YouTube

    Toby

    Hi Toby,

    We have fixed this problem internally and the fix should be available with the next update to animate CC.

Maybe you are looking for