Problem installation Sliverlight on WMC

Similar Questions

• When I go to netflix for a movie he continues saying theres a problem with Sliverlight: error code 2105

  When I go to netflix to watch a movie it still says theres a problem with the installation Sliverlight 2105 error code. I uninstalled and reinstall but get the same message.

  Run this Microsoft Fix it

• Problem installation of update KB2556532 on Windows Vista 32 bit - stops configuration stage 3 of 3

  original title; Problem installation of update KB2556532 on Windows Vista 32 bit

  I had problems for the last two months trying to install the update to windows KB2556532. I have Windows Vista 32 bit.

  I had a virus that has been cleaned of my laptop. It was windows recovery of fraud, and I don't know if this could have caused the problem at first, but after you have cleaned the virus always impossible to install this update.

  She always says that it has installed ok, but then when the computer has restarted, it is located in 'Configuring Updates step 3 of 3..' he said then that the update was not installed correctly and is back from changes.  Once the computer has booted I am prompted to install the update again.  It continues in this loop.

  Can anyone help me please with this.  I can't online solutions for this problem, I looked for a few weeks to try and fix myself.

  Unfortunately if this utility installs not it is not that there is something corrupt or prevent Windows to install correctly.

  At this point you can try to contact Microsoft through these channels: https://support.microsoft.com/oas/default.aspx?gprid=11732&st=1 to see if they can provide assistance.

• Hi after windows 10 almost killed my laptop and I had to restore to factory settings I tried to re - install creative cloud and get the following message "WE ENCOUNTERED THE FOLLOWING PROBLEMS: INSTALLATION FAILED TO INITIALIZE program.» PLEASE DOWNLOAD A

  Hi after windows 10 almost killed my laptop and I had to restore to factory settings I tried to re - install creative cloud and get the following message "WE ENCOUNTERED THE FOLLOWING PROBLEMS: INSTALLATION FAILED TO INITIALIZE program.» Please DOWNLOAD ADOBE SUPPORT ADVISOR TO DETECT THE PROBLEM. "then I tried to download the Advisor to support that to find it is no longer available. Accept payment until this problem is solved we know how to solve this problem?

  first of all uninstall cc on your computer.

  Run the vacuum cleaner by, http://www.adobe.com/support/contact/cscleanertool.html

  Restart your computer and reinstall the cc, Download Adobe Creative Cloud apps desktop application | CC free trial Adobe

  If that translates into the same initialization error:

  start at the top and work your way down to apply applicable patches until your problem is solved.

  If (win) cc: https://helpx.adobe.com/creative-cloud/kb/creative-cloud-desktop-application-failed.html

  If your error is:

  "Setup failed to initialize. File not found. ' or 'could not initialize installation. This could be due to missing files.

  first of all, rename folder OOBE OOBE.old.

  to find the OOBE:

  Win 64 bit OS: Program Files x86\Common Files\Adobe\OOBE

  Win 32 bit OS: Program Files \Common Files\Adobe\OOBE

  Mac os: HD > library > application support of > adobe > caps

  Mac os: USER > library > application support of > adobe > OOB

  If it fails or isn't the exact error you see, uninstall, clean (http://www.adobe.com/support/contact/cscleanertool.html) and reinstall.

  If you use an installation dvd:

  Copy the contents of the drive in a desktop folder and install from this directory.

  If you are using a mac:

  1. try to create a new user account in Mac with administrator privileges.

  2. connect to the new user, navigate to Mac HD > Application > utilities > Adobe Installer folder, locate products such as Adobe Reader, Adobe Flash, Adobe Air and uninstall the

  3. navigate to the user library > Application Support > Adobe and Adobe put in the trash.

  4. navigate to Mac HD > library > Application Support > Adobe and Adobe put in the trash.

  5 restart the installation.

  If everything is applicable above fails, check your Setup logs:

  http://helpx.Adobe.com/Photoshop-elements/KB/troubleshoot-install-using-logs-elements.html

• I have real problems, installation and update of adobe programs on my mac (OSX 10.8.4)

  Here are the problems.

  Have the new Imac 27 "with 3 TB of fusion drive.

  Have CS6 LR etc, but having real problems, installation and update of program ADOBE EVERYTHING including Flash. CS6 it got to the point where I went through the Adobe representative on the online chat and we ended up having to put in place a new log-in which allowed in part but CS6 last updated has not been updated. I took my apple Mac which did a software and check HD and all is well!

  Now I signed CC Adobe for photoshop and I can't install Photoshop CC and get the following error message. This isn't what I expect from the combination of Apple and Adobe! Can pls someone advise.

  ERROR: DS001: impossible to mount the disk image Volumes/Adobe Photoshop CC/Adobe Photoshop CC/payloads/AdobePDFSettings10-mul/AdobePDFSettings10-mul.dmg. Please check that the disk image is not altered.

  Hi NinoRMann,

  The download seems to be incomplete, and that's why your Mac can not mount the image. Please try to download it again.

  Kind regards

  Abhijit

• Problem Microsoft Sliverlight Mac 10.6.3

  I use Mac 10.6.3 and I have a problem. When I try to play a video, it says you must plug Sliverlight so I install Sliverlight (he said it was a successful installation). I tried run t the video and it says to install the plug in? any ideas. I tried Mac Safari and play the video without problem just does not work with Firefox.

  Follow these steps:

  Enter about: addons in your address bar, press enter

  Then, go to plugins and enable Silverlight, restart Firefox.

• HP deskjet d5560: problem installations hp deskjet D5560 with windows 7

  Hello all I have this problem, you can install the printer driver with the cd D5560 hp with windows 7 I have a hp prodesk pc g3 400 mt
  

  Greetings @massimo67,

  Thank you access the Forums from HP Support for extra support! I see you are having problems installing the printer. I'd love to help you.

  Thanks for the screenshot, but I can't read it. Please translate some of them.

  You can try this document to see if it will help: "Device installation failed" or "Unknown device" message during Installation USB (Windows).

  If this helps you to find a solution, please click on the button "accept as a Solution. If you wish, to say thank you for my effort to help, click on the 'Thumbs Up' to give me a Kudos. Please let me know the results. Good day!

• Application of distributed creation of problem (installation file)

  We develop a tool with Measurement Studio in Visual Studio 2008. Now, we have a problem in its deployment.

  We have a rule that users don't have administrative privileges on their computers.

  And when we created the Setup project to install the tool, he needed the privileges of Directors even when we used the ".msi file" instead of the "setup.exe" which is something we must avoid.

  Is it possible to deploy this tool as well as the Measurement Studio dll without needing administrative privileges?

  Thanks in advance

  Hi Mohammed,.

  In fact is not a way to run the installation without administrative rights tool. The installation program requires the permission to write to protected paths which are only accessible by admin. Also just as a side note, you should always run setup.exe and not the msi as the setup.exe sets flags for the msi runs correctly.

  Thank you!

  Kind regards

• OfficeJet Pro 6975: 6975 printer Installation stand. Problem installation of ink cartridges.

  Printer is just out of the box.  Installation instructions for the installation of ink cartridges call for lifting of the top cover (with window).  I woke up using inlays of hand on each side.  But the top panel seems to be stuck on the left side.  The right side is free and can be lifted, but not the left.  What Miss me?  Help... Thank you.

  Thanks for the leap here, 8Lives.  I turned off the printer earlier, left for a while, and when I get back, tried again to open the top panel.  He opened.  No idea if market / stop is behind these events, but it's the only thing that has changed.

  I've then turning on the printer with the top panel open in order to focus the ink cartridge sled, and she centered.  So I think that the problem is resolved, although I don't know exactly what's responsible.  In any case, thanks again.  See you soon...

• How to solve a problem installation software re. the Windows logo test

  I tried to install the sorftware for a new kodak printer and display a window pop up that tells me that the software did not test the windows logo and think I may need a device driver installed. Continue installation can compromise my operating system! I contacted kodak twice to try to resolve the problem, but they were not able to help. Any ideas?

  Hello

  ·         What operating system is installed on your computer?

  ·         Did you do changes on the computer before the show?

  You can run the Microsoft Fixit next article and check.

  Solve problems with programs that cannot be installed or uninstalled

  http://support.Microsoft.com/mats/Program_Install_and_Uninstall

  Let us know if that helps.

• HP Photosmart 7520 problem installation (left side black) black ink cartridge

  I replaced the ink cartridges in the HP Photosmart the 7520 front unit and had no problem. It is very easy.

  Now, I had to replace the print cartridge black on the left side of the ink cartridges. The old man is very good, but I can't get the new cartridge to go! I don't know what I'm doing wrong. I pulled the plastic wrap and twisted the orange lever down.

  I can't have the back of the cartridge to slide between the side of the bracket and the cartridge color next to it. He won't go. I don't even get it far enough to start the shoot from the front down. I tried to remove the color cartridge, but it does not help. I compared the old and new side by side cartridges. They look the same. Except, the former says 564 - installation, and the news is 564 - XL. I believe that this is the first change since we bought the printer.

  Any ideas?  Thank you.

  Phil Brown

  7520 photosmart all-in-in-one using five ink cartridges. Photo, Magenta, Cyan, yellow and black. The cartridge on the left side is a Photo cartridge. This cartridge is not the same as the black cartridge.

  Please make sure you are trying to install the Photo cartridge in the left side slot. The Photo ink cartridge will be a "Bow tie" icon and black cartridge will have a "Pentagon" icon on this subject. See the document below to learn more about the difference between a Photo black cartridge:

  http://support.HP.com/us-en/document/c01839024

• I have problems installation and update, get the error 641

  I have installation and update problems to continue to receive code 641 please help

  Hi ByrdyRidgley,

  Follow the troubleshooting steps in this thread with the same error code 641.

  Let us know if that helps.

• BlackBerry Smartphones Intellisync ' Attention code - 0x3b21 "problem installation DM 4.6 own

  I am running XP from Microsoft with Outlook 2003

  A colleague of mine to buy a blackBerry "BOLD" last week and asked me if I would help set up. I ran the installation disc to install the Desktop Manager so that I could sync the "BOLD" with Outlook 2003 (we do not have an exchange server so I use the BlackBerry redirector). However, when I try to go through the initial sync-> synchronization-> synchronization configuration (button) Setup, just before the menu displays, I get the software Intellisync 'experienced attention. Warning code - 0x3b21. Check the documentation. "error.

  I tried install disk (DM 4.6), installs from the Web of BlackBerry (DM 4.6 and 4.7) site and installs from AT & T (4.6 DM) site and I get the same error.  (NOTE: between each new installation, I did a complete uninstall - remove programs, new edition and deletion of folder of files)

  I went through all the posts that seemed even semi-connexes and have not found a solution that works.

  Because that, in each a complete uninstall I made, I didn't once a Puma Technologies or input file, I think that my problem lies somewhere with this particular folder/file/program is not installed, but I need help/direction if that is the case.

  Thanks for any help!

  So, after trying different configurations, I discovered that my problem is not the "0x3b21" error message, but rather, I tried to do something that I am not set up to do.

  When you install the desktop software, I me by selecting the "integrate with work Email" because that's what I wanted to do. integrate with an email account that is already put in place to work. However, I did notice the part of having an exchange server, which we don't have in our company (all of our electronic mail is routed through a mail client based on the web through our ISP).

  Finally, I tried the option "Integrate with personal messaging" and low and behold, I was able to sync my calendar, tasks and contacts, without any problem.

  Unfortunately, I don't know how to sync my email (which is important), but I will do more research before you start a new thread, because this problem is not applicable to this topic.

• Windows 8 problems installation programs/updates

  I have a new desktop computer with Windows 8. When I try to install a program (or an update), this cannot be done and always get the message "errors occurred during the installation of the updates/program". In addition, after you restart the office due to the update, the machine gets stuck on update x x. It stays like that for hours. Maybe the two problems are related to each other?

  Hi Maurizio,.

  Thanks for posting your question in the Microsoft Community.

  I understand the inconvenience caused to you and I will definitely help you.

  According to the description of the problem, it seems that you have problems with the installation of the updates / programs on your computer.

  Please answer the following questions so that I could help you further:

  1. Did you of recent changes made to your computer?
  2. Which are the programs that you tried to install?
  3. You receive a different error message?
  4. Do you get a BSOD?
  5. You have a parallel operating system installed?

  Try these steps and come back to me with the results:

  1. Task Manager
     This problem can be caused by a conflicting program. Right-click on the taskbar and click on "Task Manager". Disable search malware. ( Careful!) In addition, find Windows Update or anything written and disable it. Try to reinstall the update.
  2. Windows Defender
     Windows Defender is a program built into Windows 8 antivirus and help that you deal with virus and malware with ease. Open Windows Defender by delving into "Apps". Tap on the start screen (there is no box, just type). Install the latest Windows Defender updates and perform a full scan.
  3. Clean the disc
     Annex a disk clean up for each of your drives.
  4. Refresh and Reset
     If nothing works, I guess you will have to go with each refresh or Reset. To do referring to this link: http://blogs.msdn.com/b/b8/archive/2012/01/04/refresh-and-reset-your-pc.aspx

  If this does not resolve the problem or if you need assistance, feel free to reply to this message.

  Ashwin

• OEM 13 c - problem installation using a PDB as OMR file

  I encountered a problem while installing OEM 13 c (13.1.0.0) against a 12.1.0.2.0 snap-in database.
  

  
  

  I have a 12.1.0.2.5 RAC DB with a PDB file named "emrep_pdb".

  
  

  Select name, open_mode from v$ PDB;

  NAME OPEN_MODE

  ------------------------------ ----------

  PDB$ SEEDS IN READ ONLY

  BWPDB MOUNTED

  EMREP_PDB READ WRITE <-I want to use this PDB as my OMR

  
  

  On the #7 of the OEM Enterprise installation procedure step Manager Cloud control 13 c I enter the following database connection details:

  Database hostname: hostname for DB SCAN >

  Port: 1521

  Service/SID: emrep_pdb

  SYS password: < password account SYS >

  
  

  I get the message:

  ORA-01219: connectable to no database or database open; motions allowed in the fixed tables or views only

  
  

  However, the PDB is opened as shown in the above query.  Any ideas why I can't connect to the PDB of the 13 c OEM to step #7 Installer?

  
  

  Hmmm, it seems that this peut been the problem:

  INST_ID select, name, open_Mode, restricted SGS $ PDB;

  INST_ID SELECT OPEN_MODE RESTRICTED NAME

  ---------- ------------------------------ ---------- ----------

  2 SEEDS OF $ PDB READ ONLY NO.

  2 MOUNTED EMREP_PDB

  PDB $1 SEED READ ONLY NO.

  1 EMREP_PDB READ WRITE NOT

  The PDB is not open on the #2 node.  DOH!  Thank you.

  Looks like I had to specify:

  ALTER connectable database to open emrep_pdb instance = all;

  I forgot the "instances = all" part.