problem installation WRT54G2

I just bought a new router wrt54g2 and Dell inspiron laptop and keep implementing stalled the installation with 'ethernet cable connection error' guests. All connections by modem, router and computer are tight. I can 'ping' the router successfully and have tried other cables ethernet with the same result.  The control panel of the computer says that the ethernet works correctly. All the lights are on on the router. Y at - it no other check/try? or can I set up my wireless router? I hate to use it without warranty for my network.

Advertisement

Throw the installation CD it doesn't help.  To connect through a cable to 192.168.1.1 to your router with empty user name, admin password.  Manually configure your router.  Once done, you can configure your connection wirelessly with security.

Tags: Linksys Routers

Similar Questions

  • Problem installation of update KB2556532 on Windows Vista 32 bit - stops configuration stage 3 of 3

    original title; Problem installation of update KB2556532 on Windows Vista 32 bit

    I had problems for the last two months trying to install the update to windows KB2556532. I have Windows Vista 32 bit.

    I had a virus that has been cleaned of my laptop. It was windows recovery of fraud, and I don't know if this could have caused the problem at first, but after you have cleaned the virus always impossible to install this update.

    She always says that it has installed ok, but then when the computer has restarted, it is located in 'Configuring Updates step 3 of 3..' he said then that the update was not installed correctly and is back from changes.  Once the computer has booted I am prompted to install the update again.  It continues in this loop.

    Can anyone help me please with this.  I can't online solutions for this problem, I looked for a few weeks to try and fix myself.

    Unfortunately if this utility installs not it is not that there is something corrupt or prevent Windows to install correctly.

    At this point you can try to contact Microsoft through these channels: https://support.microsoft.com/oas/default.aspx?gprid=11732&st=1 to see if they can provide assistance.

  • Hi after windows 10 almost killed my laptop and I had to restore to factory settings I tried to re - install creative cloud and get the following message "WE ENCOUNTERED THE FOLLOWING PROBLEMS: INSTALLATION FAILED TO INITIALIZE program.» PLEASE DOWNLOAD A

    Hi after windows 10 almost killed my laptop and I had to restore to factory settings I tried to re - install creative cloud and get the following message "WE ENCOUNTERED THE FOLLOWING PROBLEMS: INSTALLATION FAILED TO INITIALIZE program.» Please DOWNLOAD ADOBE SUPPORT ADVISOR TO DETECT THE PROBLEM. "then I tried to download the Advisor to support that to find it is no longer available. Accept payment until this problem is solved we know how to solve this problem?

    first of all uninstall cc on your computer.

    Run the vacuum cleaner by, http://www.adobe.com/support/contact/cscleanertool.html

    Restart your computer and reinstall the cc, Download Adobe Creative Cloud apps desktop application | CC free trial Adobe

    If that translates into the same initialization error:

    start at the top and work your way down to apply applicable patches until your problem is solved.

    If (win) cc: https://helpx.adobe.com/creative-cloud/kb/creative-cloud-desktop-application-failed.html

    If your error is:

    "Setup failed to initialize. File not found. ' or 'could not initialize installation. This could be due to missing files.

    first of all, rename folder OOBE OOBE.old.

    to find the OOBE:

    Win 64 bit OS: Program Files x86\Common Files\Adobe\OOBE

    Win 32 bit OS: Program Files \Common Files\Adobe\OOBE

    Mac os: HD > library > application support of > adobe > caps

    Mac os: USER > library > application support of > adobe > OOB

    If it fails or isn't the exact error you see, uninstall, clean (http://www.adobe.com/support/contact/cscleanertool.html) and reinstall.

    If you use an installation dvd:

    Copy the contents of the drive in a desktop folder and install from this directory.

    If you are using a mac:

    1. try to create a new user account in Mac with administrator privileges.

    2. connect to the new user, navigate to Mac HD > Application > utilities > Adobe Installer folder, locate products such as Adobe Reader, Adobe Flash, Adobe Air and uninstall the

    3. navigate to the user library > Application Support > Adobe and Adobe put in the trash.

    4. navigate to Mac HD > library > Application Support > Adobe and Adobe put in the trash.

    5 restart the installation.

    If everything is applicable above fails, check your Setup logs:

    http://helpx.Adobe.com/Photoshop-elements/KB/troubleshoot-install-using-logs-elements.html

  • I have real problems, installation and update of adobe programs on my mac (OSX 10.8.4)

    Here are the problems.

    Have the new Imac 27 "with 3 TB of fusion drive.

    Have CS6 LR etc, but having real problems, installation and update of program ADOBE EVERYTHING including Flash. CS6 it got to the point where I went through the Adobe representative on the online chat and we ended up having to put in place a new log-in which allowed in part but CS6 last updated has not been updated. I took my apple Mac which did a software and check HD and all is well!

    Now I signed CC Adobe for photoshop and I can't install Photoshop CC and get the following error message. This isn't what I expect from the combination of Apple and Adobe! Can pls someone advise.

    ERROR: DS001: impossible to mount the disk image Volumes/Adobe Photoshop CC/Adobe Photoshop CC/payloads/AdobePDFSettings10-mul/AdobePDFSettings10-mul.dmg. Please check that the disk image is not altered.

    Hi NinoRMann,

    The download seems to be incomplete, and that's why your Mac can not mount the image. Please try to download it again.

    Kind regards

    Abhijit

  • Help installation WRT54G2

    I recently to plug a new WRT54G2 after the death of my faithful WRT54. I installed my old 54G a few times before, never through the use of the CD (it's unnecessary), so I thought it would be a fairly easy installation. I copied my old router settings (192.168.2.1 etc.) but I was not able to get a connection to the internet. I use a modem RTA1320. Now for the strange part... I was able to connect to "Steam", the game by the WRT54G2 like Skype application. Because of that I thought that the problem could be with a pesky anti-virus or firewall, so I disabled both (including the windows firewall), nothing helps. According to cisco Network Magic program, I am connected to the internet, but I failed to connect with firefox, internet explorer or google chrome (I deleted all browsing history, cookies etc...). I restarted both modem the router again, but I am confused. I'm sure it's a mistake to simple configuration on my part, but it seems very strange that I can connect correctly to steam and to play online with Team Fortress 2 (cannot download good maps) and yet I can not connect to the internet through a wired connection or wireless on a vista desktop and laptop XP computer. Can someone give me a hand? (I'll try to restart again after this post and it will probably work ^-^)

    Just as I predicted, I have reset to the default values (something I had not done) and it worked. I myself used reverse physcology.

  • HP deskjet d5560: problem installations hp deskjet D5560 with windows 7

    Hello all I have this problem, you can install the printer driver with the cd D5560 hp with windows 7 I have a hp prodesk pc g3 400 mt

    Greetings @massimo67,

    Thank you access the Forums from HP Support for extra support! I see you are having problems installing the printer. I'd love to help you.

    Thanks for the screenshot, but I can't read it. Please translate some of them.

    You can try this document to see if it will help: "Device installation failed" or "Unknown device" message during Installation USB (Windows).

    If this helps you to find a solution, please click on the button "accept as a Solution. If you wish, to say thank you for my effort to help, click on the 'Thumbs Up' to give me a Kudos. Please let me know the results. Good day!

  • Application of distributed creation of problem (installation file)

    We develop a tool with Measurement Studio in Visual Studio 2008. Now, we have a problem in its deployment.

    We have a rule that users don't have administrative privileges on their computers.

    And when we created the Setup project to install the tool, he needed the privileges of Directors even when we used the ".msi file" instead of the "setup.exe" which is something we must avoid.

    Is it possible to deploy this tool as well as the Measurement Studio dll without needing administrative privileges?

    Thanks in advance

    Hi Mohammed,.

    In fact is not a way to run the installation without administrative rights tool. The installation program requires the permission to write to protected paths which are only accessible by admin. Also just as a side note, you should always run setup.exe and not the msi as the setup.exe sets flags for the msi runs correctly.

    Thank you!

    Kind regards

  • OfficeJet Pro 6975: 6975 printer Installation stand. Problem installation of ink cartridges.

    Printer is just out of the box.  Installation instructions for the installation of ink cartridges call for lifting of the top cover (with window).  I woke up using inlays of hand on each side.  But the top panel seems to be stuck on the left side.  The right side is free and can be lifted, but not the left.  What Miss me?  Help... Thank you.

    Thanks for the leap here, 8Lives.  I turned off the printer earlier, left for a while, and when I get back, tried again to open the top panel.  He opened.  No idea if market / stop is behind these events, but it's the only thing that has changed.

    I've then turning on the printer with the top panel open in order to focus the ink cartridge sled, and she centered.  So I think that the problem is resolved, although I don't know exactly what's responsible.  In any case, thanks again.  See you soon...

  • How to solve a problem installation software re. the Windows logo test

    I tried to install the sorftware for a new kodak printer and display a window pop up that tells me that the software did not test the windows logo and think I may need a device driver installed. Continue installation can compromise my operating system! I contacted kodak twice to try to resolve the problem, but they were not able to help. Any ideas?

    Hello

    ·         What operating system is installed on your computer?

    ·         Did you do changes on the computer before the show?

    You can run the Microsoft Fixit next article and check.

    Solve problems with programs that cannot be installed or uninstalled

    http://support.Microsoft.com/mats/Program_Install_and_Uninstall

    Let us know if that helps.

  • HP Photosmart 7520 problem installation (left side black) black ink cartridge

    I replaced the ink cartridges in the HP Photosmart the 7520 front unit and had no problem. It is very easy.

    Now, I had to replace the print cartridge black on the left side of the ink cartridges. The old man is very good, but I can't get the new cartridge to go! I don't know what I'm doing wrong. I pulled the plastic wrap and twisted the orange lever down.

    I can't have the back of the cartridge to slide between the side of the bracket and the cartridge color next to it. He won't go. I don't even get it far enough to start the shoot from the front down. I tried to remove the color cartridge, but it does not help. I compared the old and new side by side cartridges. They look the same. Except, the former says 564 - installation, and the news is 564 - XL. I believe that this is the first change since we bought the printer.

    Any ideas?  Thank you.

    Phil Brown

    7520 photosmart all-in-in-one using five ink cartridges. Photo, Magenta, Cyan, yellow and black. The cartridge on the left side is a Photo cartridge. This cartridge is not the same as the black cartridge.

    Please make sure you are trying to install the Photo cartridge in the left side slot. The Photo ink cartridge will be a "Bow tie" icon and black cartridge will have a "Pentagon" icon on this subject. See the document below to learn more about the difference between a Photo black cartridge:

    http://support.HP.com/us-en/document/c01839024

  • Problem with WRT54G2

    Hi people, I'm having a problem connecting to the internet using a wired connection to my desktop computer (w / Vista) to my new Linksys WRT54G2 router.  The purpose of the router is to set up a simple home network with a wired to my office and a Wi - Fi connection on my laptop.  A few weeks ago I've implemented successfully using my old desktop computer (w / Windows XP) but I can't seem to make it work with the newer computer using Vista.  There is nothing wrong with the Wi - Fi connection... my phone was able to connect any desktop computer, the router is connected to.  It's the desktop connection that I have problems with.  I am able to enter the router configuration page via my web browser with no problems at all.

    I am not the most technically savvy person, but I tried pretty much everything I can think of or find on the internet and nothing has worked.  I found reports that the top of my model is compatible with Vista.  I tried the Linksys Setup CD... I tried setting up manually just by using the settings page.  I updated the firmware as well.

    I tried to release/renew my ip address hoping that would help, but I can't do it anymore... I get the message "the operation failed as no adapter is in the State permitted for this operation."  Apparently, this was related to the Winsock corruption but to check the Microsoft Web site, I don't have any of the symptoms of this.  Also, I don't know what Winsock, so I left there.

    The modem which must be part of the network is a Westell value bridged ethernet and DHCP disabled, defined in accordance with the instructions of my ISP.

    Any help you could provide would be appreciated.  I'm becoming addicted to having this problem and I need help.

    Make sure that your connection to the Local network is set to 'Obtain IP address automatically'.

    1. click on the Start button > settings > Panel > button-Select "Obtain IP address automatically" Network Connections - right click on Local area connection icon and click Properties-on the "general" tab select "Internet TCP/IP Protocol" and click Properties and click the Ok button to save and click 'Close' in the main window of properties...

    2. click on start > all programs > Accessories, right on command prompt and select run as administrator.

    In the type the netsh winsock reset command prompt window and press ENTER... Restart the computer, see if you can access the Internet...

    If it does not connect to the Internet - click on start > all programs > Accessories > right on command prompt and select run as administrator... In the command prompt window type ipconfig and press "Enter"... Look for Ethernet adapter Local Area Connection address IP, subnet mask, and default gateway...

    IP address must be 192.168.1.x, subnet mask: 255.255.255.0 default gateway: 192.168.1.1 (assuming that your router is 192.168.1.1)...

    If you get mentioned above IP address, a subnet and address the gateway then you ping the gateway, type ping 192.168.1.1 and press ENTER... If she gives you ask has expired, and then disable any firewall, the security software on the computer...

    If you get 4 replies then type ping 4.2.2.2 and press ENTER, if you get the request exceeded, then disconnect the power cable from your Modem and router, wait a minute and connect the power cable from the Modem, wait a minute, and connect the power cable from your router... If you get 4 replies then type ping yahoo.com and press ENTER... If you get answers from Yahoo, then you should get the Internet after adjusting the browser settings...

    Setting of the browser settings: open an IE, click on tools > Internet Options, and then delete all files, cookies, history, forms... GoTo 'Connections', make sure that never Dial a connection is selected, click on network settings and make sure that all the options are unchecked... Once you are finished, click OK... Close IE and reopen...

    If yahoo expires, provide static DNS on your connection to the local network...
    Open an Internet Explorer browser on your computer (desktop) wired page. In the address bar type - 192.168.1.1 and press ENTER... Let the empty user name & password use admin lowercase...

    Click the status tab, and take note of DNS addresses...

    Click the Start button > settings > Control Panel > Network Connections - right click on Local area connection icon and go to properties - in the "Général" tab, select "TCP/IP Internet Protocol" and click on the button properties-select "Use the following DNS settings" and enter your, click the Ok button to save and click 'Close' in the main window of properties DNS addresses... You should be able to go online...

  • I have problems installation and update, get the error 641

    I have installation and update problems to continue to receive code 641 please help

    Hi ByrdyRidgley,

    Follow the troubleshooting steps in this thread with the same error code 641.

    Let us know if that helps.

  • Yet another problem with WRT54G2...

    Well I had on and off problems with my WRT54G2 router, I got it for about 3 months now and recently full of endless problems... No, my problem is when I turn on my PS3, I get a pop-up message on my computer, there is an IP address conflict, I've never had this problem until today... my PS3 has its own IP address... so when I turn on my PS3 I lose connection on my computer... honestly im tired of having problems with the * beep * thing... anyone has a solution?

    Toomanydonuts is right, can be your PS3 and your computer gets the same Ip address of your router, which is causing this problem and this is why you are not able to go online. It's better, you provide a static Ip address to your PS3 and this will solve your problem.

    You can assign a static Ip address on your PS3. IE: 192.168.1.10 subnet mask: 255.255.255.0 default gateway / router: 192.168.1.1 preferred DNS: 4.2.2.2 and auxiliary DNS: 192.168.1.1. Once provide you this static IP address to your PS3 it will solve your problem.

  • Problem installation Sliverlight on WMC

    I recently had to reinstall WIndows 7 ultimate x 64. When I try to use the MSN player in WMC, it begins to install the product, but does not say that there has been a problem and try later. It is during the installation of silverlight. I have installed and uninstalled Silverlight from the browser and also deleted and replace WMC but always the reamains problem. Anyone got any ideas?

    Thanks, I have actually sussed it! Because I used the "Easy" transfer, it is copied some files to the appdata folder. Only found this when I deleted all my temporary files, represented the update, then checked the temporary files. There is a Notepad with the error log file, complaining that he could not write the file and I need to take care of. I don't have to take possession, but he culd not write the file as it was already there. Simply, I deleted the file and ran the update once more. Internet TV installed this time without any problem!

  • BlackBerry Smartphones Intellisync ' Attention code - 0x3b21 "problem installation DM 4.6 own

    I am running XP from Microsoft with Outlook 2003

    A colleague of mine to buy a blackBerry "BOLD" last week and asked me if I would help set up. I ran the installation disc to install the Desktop Manager so that I could sync the "BOLD" with Outlook 2003 (we do not have an exchange server so I use the BlackBerry redirector). However, when I try to go through the initial sync-> synchronization-> synchronization configuration (button) Setup, just before the menu displays, I get the software Intellisync 'experienced attention. Warning code - 0x3b21. Check the documentation. "error.

    I tried install disk (DM 4.6), installs from the Web of BlackBerry (DM 4.6 and 4.7) site and installs from AT & T (4.6 DM) site and I get the same error.  (NOTE: between each new installation, I did a complete uninstall - remove programs, new edition and deletion of folder of files)

    I went through all the posts that seemed even semi-connexes and have not found a solution that works.

    Because that, in each a complete uninstall I made, I didn't once a Puma Technologies or input file, I think that my problem lies somewhere with this particular folder/file/program is not installed, but I need help/direction if that is the case.

    Thanks for any help!

    So, after trying different configurations, I discovered that my problem is not the "0x3b21" error message, but rather, I tried to do something that I am not set up to do.

    When you install the desktop software, I me by selecting the "integrate with work Email" because that's what I wanted to do. integrate with an email account that is already put in place to work. However, I did notice the part of having an exchange server, which we don't have in our company (all of our electronic mail is routed through a mail client based on the web through our ISP).

    Finally, I tried the option "Integrate with personal messaging" and low and behold, I was able to sync my calendar, tasks and contacts, without any problem.

    Unfortunately, I don't know how to sync my email (which is important), but I will do more research before you start a new thread, because this problem is not applicable to this topic.

Maybe you are looking for