Problem installing Windows 7 on Lenovo ThinkPad Edge 13 665D817

Similar Questions

• Blue screen when you try to install Windows XP on Intel ThinkPad Edge 520

  Hello

  I have a ThinkPad Edge 520 type 1143-B5G with a clean disk and I need to install Windows XP on it, for reasons of inheritance. I read on the pilot of the technology Intel Rapid store being necessary, but this seems not to apply to the 520, only to 220 and 420. The recommended settings are not available on the 520 (nor is the driver itself), and the driver is listed by n/a for the 520 in the list of drivers of Lenovo. But, I always get a BSOD error just as Windows is starting from the installation DVD, after the DVD instructed all pilots, he can think about.

  Anyone know how to fix this?

  Would BTW - be possible to install XP in a separate partition, main alongside Windows 7, on a drive that already has Windows 7 on it? Or a clean disk is needed for this?

  Kind regards

  / EvA

  Hello and welcome,

  What settings are you looking for?  It seems that there is a problem with the mode of operation of HD.  The E520 BIOS has an option to change the SATA compatibility instead of AHCI mode?  You will not be able to install a version of "Vanilla" of XP without adding the correct AHCI driver or compatibility mode.

  What version of BIOS do you have?  I see this rather cryptic reference in the BIOS 1.20:

  "[Fixes problem] problem reading/writing data to the SATA compatibility mode."

  It is possible to dual-boot XP and 7, but the best way to do is to install XP first and then let the 7 Installer put in place the configuration dual-boot.  You would still have the problem of compatibility (IDE) vs AHCI mode.

  Ah, lookinng a little further, there is a driver AHCI for XP in Lenovo driver matrix.  The readme file includes instructions on installation.

  Intel SATA controller AHCI Driver for Windows

  Readme for Intel SATA controller AHCI Driver for Windows

  Maybe you get.

  Z.

• Battery Lenovo Thinkpad Edge 13 (0217) problem

  Hello guys,.

  Because I couldn't find a solution for my problem, I decided to write here, hoping that someone (by a team from Lenovo or users) have the same problem and therefore can help me.

  I have a Lenovo ThinkPad Edge 13 model (version 0217). (I bought from a friend, because he didn't deliver more when I decided to buy it.)

  I have problems with my battery. The design of this capacity is 62.12 Wh, I used it wisely, so it was not always charged to 100%. I always unload down around 5-7% and then plug the power adapter. (See image).

  

  My first problem is that during the last 3 months, the capacity is down to 45,88 Wh and I can't really understand why. This can be a generic problem with the battery?

  My second problem is - for which I found another topic here, but it did not help me - that when I charge the battery, stops at 99% of load, showing "3 minutes is remaining" and if I disconnect and reconnect the adapter, it stops like 99% saying have completely loaded. In the battery maintenance, I changed the settings to "always fully charge' Custom, but still, it won't charge the battery fully.

  

  My third problem is that I have updated the BIOS of my laptop a few days ago, and when I try to search for an update of the firmware battery or when I do a battery meter reset, the system shuts down suddenly without any warning or something else.

  I would be really grateful if someone could help me with this, I like really my laptop but it really bothers me...

  Thanks in advance.

  (1) so that you must have used it a bit and then, under the charge cycle is at 234.

  (2) don't know, but sometimes my battery the fact.

  (3) download HWinfo32 and check your system temp, and what temperature your CPU is.

• LENOVO THINKPAD EDGE 0578-A25, error 0201 stuck touch 28

  Nobody seems to know what to do about it. All the ANSWERS?

  LENOVO THINKPAD EDGE 0578-A25, error 0201 stuck touch 28

  I learned that there was a technical problem, sent to the computer, and they replaced a part, even if my ThinkPad was out of warranty. I appreciate their owner until the problem and treat it with him.

• Having problem installing Windows Vista Sp2, I keep getting error 0x800B0100

  original title: HELP! Having problem installing Windows Vista Sp2, I keep getting error 0x800B0100

  My checksur.log said

  =================================

  Preparation of control system was updated.

  Binary version 6.0.6002.22441

  Version 9.0 package

  2011-06-29 15:32

  Checking Windows Service Packages

  Checking of manifests package and catalogs

  (f) CBS MUM corrupt 0x800F0900 servicing\Packages\Package_4_for_KB948610~31bf3856ad364e35~x86~~6.0.6001.2123.mum line 1110: nam

  Checking package Watchlist

  Watchlist checking

  Checking packages

  Control components store

  Hello

  These should help to resolve the problem:

  How to fix Windows Vista error 800b0100 update
  http://www.SimpleHelp.NET/2008/07/06/how-to-resolve-Windows-Vista-update-error-800b0100/

  Error Code 800b0100 in Windows Update
  http://www.instantvista.com/800B0100.html

  Error message when you try to use Microsoft Update or Windows Update Web sites to install
  updates: "0x800B0100.
  http://support.Microsoft.com/kb/956702
  How to reset the Windows Update components? -a Mr Fixit
  http://support.Microsoft.com/kb/971058

  Description of the system for Windows Vista, Windows Server 2008, update tool and
  for Windows 7
  http://support.Microsoft.com/kb/947821

  ==========================================================================

  How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issues
  http://support.Microsoft.com/kb/947366

  You select Download - SAVE? After download go where you put it and right click
  on and RUN as administrator.

  Download Service Pack 2 x 86 32 bit
  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=891ab806-2431-4D00-afa3-99ff6f22448d & displaylang = in

  Download Service Pack 2 x 64 64-bit
  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=8ad69826-03d4-488C-8f26-074800c55bc3 & displaylang = in

  Create a new ADMIN account with your password - same then REBOOT (do not logoff) and
  log on to the new account and try the download.

  How to obtain the latest Windows Vista service pack
  http://support.Microsoft.com/kb/935791/

  Service Pack Center
  http://Windows.Microsoft.com/en-us/Windows/downloads/service-packs

  ================================================================

  If necessary, you can get free reports of incidents however generally above allows to solve this problem.

  Windows updates - free Incident report

  Go here and click on-> Windows Update fails while searching, downloading or installation of updates
  http://support.Microsoft.com/GP/wusupport#tab3

  The security updates, you can get free support Incident report
  http://www.Microsoft.com/protect/resources/support.aspx

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• I too have a problem installing windows error1601. I went through the steps to get services and found that this installer of windows is gone. How can I get that back?

  I too have a problem installing windows error1601.  I went through the steps to get services and found that this installer of windows is gone.  How can I get that back?

  Try to run the Windows Installer Cleanup http://www.softpedia.com/get/Security/Secure-cleaning/Windows-Installer-CleanUp-Utility.shtml utility to see if that solves the problems with windows install.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Problem installing Windows XP Mode in 7 Winjdows

  I have a problem installing Windows XP Mode in Windows 7 Pro 64 running on a Dell Latitude E6510 laptop with an i5 processor and 8 GB of ram.  This machine supports hardware virtualization, and it is enabled in the BIOS.

  Before downloading software in XP Mode, the MS download required Windows validation Web site.  Downloaded and reported validation validation and a successful installation.  Then I downloaded Windows XP Mode (WindowsXPMode_en - us.exe, 481 052 KB) installation package and the package of Windows Virtual PC (Windows6 1 - KB958559 - x 64 - RefreshPkg.msu, 16 692-Ko).  Then, I installed Windows XP Mode; the installation ran without any problems apparent and reported success.
  According to the docs of download site, the next step is to: "... click on the Windows 7 start button , and then select all programs > Windows Virtual PC > Windows XP Mode to begin the installation."
  My problem is Windows Virtual PC does not appear anywhere in the selection of all programs list - believe me, I looked.  There is, however, a new directory called
  c:\ProgramFiles\Windows XP Mode\
  but it contains no exe file.  It contains a file of 1.2 GB called Windows XP Mode base.vhd - but it is not clear what to do with it.  There is also a tutorial subdirectory.
  I tried to reinstall Windows XP Mode (without uninstalling first) but I just get a warning message that the program is already installed.  Windows XP Mode appears on the list "Uninstall or change a program" in the module programs and features in Control Panel.
  I tried running (Windows6. 1-KB958559-x64-RefreshPkg.msu(Windows6.1-KB958559-x64-RefreshPkg.msu, goal that throws error 0x8007000d, "The data is invalid."
  If at this point, my question is simple, "what to try next?
  Thanks in advance.

  The right way to install Windows XP Mode, you must first install Windows Virtual PC, and then install Windows XP Mode.

  You must install both files:

  1 Windows6. 1 - KB958559 - x 64 or x 86 architecture that you run

  Restart the system, and then install:

  2 WindowsXPMode_en-we

  ------------

  Uninstall Windows XP Mode:

  Click Start, type: programs and features

  Press enter on your keyboard

  Scroll down

  Select Windows XP Mode

  Click Change/uninstall in the command bar

  Uninstall Windows XP Mode

  -----------------

  Restart your computer

  Proceed with the installation of Windows XP Mode in the right order.

  --------------

  If it does not always show upward:

  Click Start, type: enable or disable windows features

  Scroll down

  Make sure that Windows Virtual PC is checked

  Click OK

  Reboot if prompted

  -------------------

  http://www.notebooks.com/2009/11/23/using-Windows-Virtual-PC-with-Windows-XP-mode/

• problem installing windows 7 finishing installation scope and freeze for hours please help

  problem installing windows 7 finishing installation scope and freeze for hours please help

  my pc req:
  2 GB of ram
  NVIDIA geforce 210 1 GB
  180 GB
  Pentium 4 3.40
  Help, please

  Turn off the computer.

  try to start safe mode, start your PC, just before the system loads the Windows operating system. Press the [F8] key function 8 on your keyboard which will launch the menu Advanced Boot Options. Select Safe Mode.

  Log, click Start, type Device Manager, press ENTER.

  Expand graphics cards

  Right-click your video card, click on uninstall.

  Restart your system

  Log, click Start, type Device Manager, press ENTER.

  Expand graphics cards
  Right-click your video card

  Driver update software; then click search automatically for updated driver.

• Lenovo ThinkPad Edge 11 "screen

  Hello

  I have Lenovo ThinkPad Edge 11 "2545 - 3RG

  I accidentally broke the screen

  Now, I need to change the screen.

  I searched on screens Hosani, but impossible to find a model for my laptop
  You can use one of these screens:

  11.6 Lenovo ThinkPad Edge 11 2545 - A13

  Welcome to the community.

  If you download your hardware Maintenance Manual

  http://download.Lenovo.com/ibmdl/pub/PC/pccbbs/mobiles_pdf/75y6925_03.PDF

  Take a look at pg94, the last block of the grid. It lists the 4 numbers of room possible for your pc:

  04W1379
  04W0450
  04W0451
  0A 66647

  These can help you to source, a group of experts and other parts needed.

  the manual itself, should help if you decide to do the repair yourself.

  I hope this helps.

• Problems installing Windows 7 Thinkpad X 220 (4BG-4291)

  Hello

  I just bought a new laptop a Lenovo ThinkPad x 220 (4291-4BG). I want to do a clean install of windows on them. I downloaded windows 7 ISO professional from the MSDN site. For the installation, I do like the Fallows.

  1. press F12 at startup to boot from my external DVD device (Samsung SE-S084C)

  2. the boots of the installation and I get select language. Chose Swedish to keybored and English for the rest.

  3 familiarize yourself with tap install buton now all fine so far.

  4. now, I get an error message indicating the error in the picture below

  Link to photo

  5. I have the numbers he needs a driver for the storage controller. Downloads the driver of storage card for my laptop from lenovo site adding via a USB key. And all ok lokes is picture below.

  Link to photo

  6. following Clickes and it takes a minute and then I get the error set-aside. Self image below

  Link to photo

  And here im stuck. I tried to allsow different ISO from MSDN with SP1 files and without. Were also start the installation of the same USB problem. Factury default BIOS will be reset. The BIOS is set to AHCI mode for the drive. Have updated the BIOS to the latest version 1.24 to BIOS information below

  Link to photo

  I also tested one bot UEFI using the guide from the link below.

  Installation of Windows 7 with UEFI boot on an x 220 USB

  Then I try this guide that I come to the start menu to select the boot device, but then I select my USB it will blink for a few seconds, then returns to the menu select boot device.

  I hope that someone may have an ide how to solve this problem. Any help is welcome . Sorry if my English isent the best.

  Thanks in advance

  Concerning

  Magnus

  Note of the moderator; image (s) for a total of > 50 K converted for the programming of the Forum rules

  Magnus, welcome to the forum,

  According to the OTM your system has a processor i-7, so he should have USB 3.0. Please try to install the system and make sure that only use USB 2.0 ports.

  Hope this helps

• Lenovo thinkpad edge e130 msata ssd install as boot device

  Hello, everyone!
  I'm living in Russia. Some time ago I bought the thinkpad edge e130 with core i3 3227U and 500 GB hard drive.
  This laptop has port vacuum mSATA. I know I can install ssd as a cache.
  But I want to use 128 GB ssd drive and install windows 7 pro 64 bit on it (and leave 500 GB hard drive to keep the files it contains).
  How can I do this?
  Sorry, if this forum already have the answer on this question.

  Hello everyone! I solved all my problems with this guide:
  http://blog.LapTopMag.com/triple-your-speed-how-to-install-an-mSATA-SSD-boot-drive-in-your-laptop
  All work fine!

• Cannot get Plantronics bluetooth headset appears as reading or a recorder in Panel - &#62; sound in Windows 7 with Lenovo ThinkPad

  I installed a Plantronics Voyager legend UC bluetooth headset to my work provided Lenovo ThinkPad laptop computer running Windows 7. The helmet looks like a device in the Panel--> devices and printers. However, it does not show as a device in the control--> tabs sound playback Panel or registration.  I need the headset to the playback device for my work-VoIP phone.

  I tried to remove the helmet and reinstall, but I can't delete it in the Panel--> devices and printers. When I locate and right click, remove or uninstall is not an option. I went to the control panel--> Manager--> audio video devices and game controllers, which are there and uninstalled. I then unplugged the connector of the headset, and the headset powered off and rebooted. I then plugged the connector UBS back in and turned the headset. The PC began to reinstall the drivers, but the headphones still did not appear in the sound tabs.

  I have been all over the internet trying to find a solution to this problem and so far have not been successful. I spent hours on this and it shouldn't be so hard, but it turns out be. I appreciate any help you can provide.

  Thank you!

  Thanks for your reply Mann. Here's the answer to your questons.

  1. Were you able to use this helmet earlier on this computer? Answer: Yes, it didn't work and appeared in the reading tabs and the recording of sounds. However, I accidentally deleted it--> sound when I was trying to troubleshoot why I couldn't hear the narration in the course of eLearing played on our intranet via the headphones. I only meant to change the settings so that I could make the speaker/HP the default device. BIG MISTAKE because now I can't get it to reinstall and appear in the tabs of playback and recording.
  2. Have you checked to connect the headset to any other computer, it works on other computers? Answer: The only other computer I have is an Apple MacBook Pro. I plugged the USB connector to the PC and seem to work although I can't do a one-to-one comparison.
  3. You said that Windows has started to install drivers automatically after connecting the headset and the computer restarted after the removal of noise, the video controller and game, was the driver installed successfully? Answer: Yes, but it just does not appear not liked as an option in the tabs of playback or recording.
  4. Other audio devices work fine on this computer? The only other device is the computer speakers and they work fine.

  Regarding method 1. I had already installed and run the file MicrosoftFixit.Devices.exe that you provided even if I ran again and this has not fixed the problem.

  With respect to method 2. I checked and show disabled devices is checked. The only other devices in playback and recording are speakers/HP and Realtek HD Audio Output 2.

  UPDATE! I removed the USB of the headphone connector and plugged into the MAC, and then removed the Mac and plugged into the PC, that is! The helmet now presents itself as an option in the tabs of the reading and recording. Yes! I was able to select it and set as device by default, tested the VoIP phone and it works all! Phew! I was about to give up on the VoIP phone. Thank you.

• Problem installing windows XP on the IdeaPad G550

  Last week, I bought lenovo G550. It came with Windows Vista. I want to install Windows XP on it. I found that lenovo has driver for windows XP, which will make my life easy :-) But when I try to install windows XP last night, I got blue screen several times. I get a blue screen after Windows XP loads all drivers (status winidow in installing windows XP displays "Starting windows xp setup") and he pours (blue screen). I ran chkdsk and diagnosis of memory and both went really well (not reported no error).

  Is someone else has encountered the same problem? I have a stupid mistake? Please help me

  Your response is much appreciated.

  Thank you

  Noémie

  Welcome to the forums

  You should maybe spend in compatible mode ACHI sata in bios yout and check again

• Problems installing Windows 7 64-bit SP1: "The Installation was not successful" DS_S_SUCCESS (0x0)

  I'm unable to install the Windows 7 SP1 on my laptop.  I am running Win 7 64 bit and tried to install the 64-bit SP1 via the feature updates automatic first, then with the SP1 download manually (Windows6. 1 - KB976932 - X 64 .exe).   The progresses to install SP1 to the point where it shuts down the system and it is charging but when I log in I get the dialog Setup SP1 reporting "the Installation was not successful".  By clicking on the link error display shows DS_S_SUCCESS (0x0).

  (I followed the steps of troubleshooting 1) by using the Troubleshoot Utility "Difficulty of problems with Windows Update" and 2) installed tool Rediness of updating system, but the installation of SP1 still fails with the same error.

  I have successfully applied the SP1 on a different system.  No idea why I have problems with my laptop.

  Any ideas?

  C thx.

  Have you checked your hard drive to find errors? Another obscure, you might try is to disable User Account Control temporarily.

  Its possible, you need to perform an update of the BIOS if one is available for your ThinkPad T60p. Also, check the updated chipset drivers.

  Furthermore, disconnect any non-essential device, you may have attached to the system.

  Its possible the SP1 download may be corrupted, I would like to download another copy and try again.

  Releasing it's easy: with Windows | ActiveWin | Laptops | Microsoft MVP

• Problems installing windows 7 32 or 64 XP 32

  Hello

  I decided it was time to upgrade to windows 7 xp 32. I'm on an IBM Thinkcentre. I did a lot of research but cannot circumvent this problem.
  When I insert the cd when the computer runs I get an error message saying that:

  "This installation disc is not compatible with your version of windows. To upgrade, you need the correct installation disc. For more information, see your computer system information. To install a new copy of Windows, restart (boot) your computer using the installation disc, and then select custom (advanced option). »

  I know that it is common, so when I restart the computer and start the disc I meet another problem. It starts to boot from the disk and say for windows to load as soon as the loading reaches the end of the bar of the computer just stops and I can't do anything. When you start the computer again then turns off after a few seconds.
  Advice please? Thank you in advance!

  Hello

  You must follow these steps before you try to install Windows 7:

  Go to your computer manufacturer's website and check if Windows 7 drivers are available for your make and model.

  http://support.Lenovo.com/en_US/detail.page?LegacyDocID=TCTR-matrix

  If this is not available, Windows 7 will not properly work for you.

  Run the "Windows 7 Upgrade Advisor.

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=20

  Check if your specifications are compatible for Windows 7:

  "Windows 7 system requirements"

  http://Windows.Microsoft.com/en-us/Windows7/products/system-requirements

  "Windows 7 Compatibility Center" for software and hardware:

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx

  Windows 7 upgrade paths:

  http://TechNet.Microsoft.com/en-us/library/dd772579 (v = ws.10) .aspx

  «Installation and reinstallation of Windows 7»

  http://Windows.Microsoft.com/en-us/Windows7/installing-and-reinstalling-Windows-7

  See you soon