Problem installing Windows XP Recovery on Satellite 5105-S702
Don't know if it is the correct newsgroup for this problem.
Tried to reinstall Win XP Pro on my PC Toshiba 5105-S702 using the recovery CD (circa 2001) that were provided with it, but was blocked at the beginning of the recovery process, with a message indicating that the product key is not valid. I suspect that it happened because originally faulty motherboard on laptop computer had been replaced by a new motherboard.
Fortunately I had previously bought a Version XP Pro SP1 detail a few years before, so I was able to use it instead of the recovery CD.
However I still would like to know how to solve this problem (with the original recovery with a new motherboard CD), before buying the retail Windows XP Pro version, in which case this problem also happens with my new laptop Pro M70.
If you'd be grateful if someone could give advice.
Can you please tell me where you bought this laptop model? At first I thought that it is a model of cell US but I can't find it supports us page.
In any case, I also think that this happen because of the exchange of the motherboard. DMI information is false and not identical with information on recovery media. Check please an interesting and similar problem on a thread Qosmio.
I'm trying to install Windows XP with SP2.
I created a new installation of Window XP with nlite disc and included the Storage Manager to get access to the hard drive.
I started with this new record of installations and allows to manage my hard drive.
Then it is formatted and files have been copied to the hard drive. After the 1 st reboot. takes place.
Windows XP logo appears logo disappears after a few seconds and it's time that the installation of 1 st screen.
But instead, it appears a box with a red X and an error message "for the given process is not enough quotas for virtual storage or the pagefile" 2 seconds later, the system will reboot and restart the installation and gets the same message and so on.
The system is already flashed with the BIOS V5.30 for XP.
To continue installing XP any help is appreciated.
just a quick question: is the recovery for Vista work? I mean, it sounds like a hardware problem, but usually if the machine worked well before, it must be another problem. The image that was created with nLite is maybe defective...
Would appreciate comments on your part.
Portable 500 GB HDD of my friend Toshiba Satellite A660 seems to have died.
I tied him to my laptop on a sata dock and runs a data recovery program because nothing has been saved. The recovery takes forever, however, and she really needs his computer to work.
Because the hard disk may be damaged in any case, I am considering buying a new hard drive and install in the Toshiba.
How can I do this without a recovery disk, though?
The old drive was a partition recovery on it, I think, but this seems useless with a new drive.
Operating system is Windows 7 64 bit home edition.
The product key is on the bottom of the laptop.
I live in Turkey and so I don't think there is a Toshiba store is close.
There are individual computer stores, so I'm confident, I can buy a new internal hard drive (I could find the sata dock here), but he must know what to do to install the software, etc.
> How can I do this without a recovery disk, though?
You either have the recovery disk or you are going to install the system using the Microsoft Windows disk.
The necessary drivers are in internet on Toshiba UE page.
The recovery disc can also be ordered here:
Faced with the need to install * Windows XP * on my * Satellite A300-1OC. *.
Here's the problem:
the * pilot integrated distribution OS for the SATA downloaded from the Intel site.
When you install XP no problem, but * when you drive where to install the system all the drive letters got mixed up *.
As it has already established a system, the * laptop starts sometimes hang on for 2-3 minutes, then again normally.* operating
Help solve this problem and recommend the correct SATA driver for my computer.
And I would like to hear the difference, * if I set BIOS compatibility mode or leave AHCI.*
+ Thanks in advance. +
Please, read here:
It may be useful for you. The topic starter had the same problem, it instaled windows, compatible mode, and then extract the driver of the exe files.
Windows 8 - Refresh PC pre-installed Windows key recovery or installation DVD disc
The problem is that the number of keys for Windows 8 is required for this operation, and I can't get it. I got Windows8 pre-installed when I bought the laptop, so I don't have the installation DVD, I did not collect the number of keys in any documentation or found on the laptop.
What can I do to make sure that if I can restore Windows 8 and all my data on the laptop?
Thanks for your help
To put it bluntly, YOU n 'T NEED a KEY! When you reinstall Windows 8, it is automatically activated from your key incorporated in the Bios. There is no need for to go you into the Bios to get the key. With Windows 8, it is how it is done. Hope this helps and if you need another post to help and we will be happy to help you.
The above opinion is mine and mine nothing and does not necessarily reflect that of Microsoft, it's employees, or any other Member of this forum
"When we try to take anything by itself, we find it hitched to everything else in the universe."-John Muir
Can I install Windows XP on a Satellite A300D - 14 p?
.. .thx for any info and/or messages...
Just to clarify something:
-If you want to install Windows XP Home edition, but do not change the BIOS settings (leave it in AHCI mode) at the beginning of the procedure of facilities you must load a SATA driver by pressing F6. That's only way to install Windows XP Home edition with success
-You can install WXP without driver SATA, but you must change the compatibility settings. Everything works fine, but if you change the settings on back ACHI you get BSOD every time when you try to start Windows XP Home edition
If you want to install the SATA driver please install WXP if you use SATA starts the driver before installing Windows XP Home edition.
original title: HELP! Having problem installing Windows Vista Sp2, I keep getting error 0x800B0100
My checksur.log said=================================Preparation of control system was updated.Binary version 6.0.6002.22441Version 9.0 package2011-06-29 15:32Checking Windows Service PackagesChecking of manifests package and catalogs(f) CBS MUM corrupt 0x800F0900 servicing\Packages\Package_4_for_KB948610~31bf3856ad364e35~x86~~6.0.6001.2123.mum line 1110: namChecking package WatchlistWatchlist checkingChecking packagesControl components store
These should help to resolve the problem:
How to fix Windows Vista error 800b0100 update
Error Code 800b0100 in Windows Update
Error message when you try to use Microsoft Update or Windows Update Web sites to install
How to reset the Windows Update components? -a Mr Fixit
Description of the system for Windows Vista, Windows Server 2008, update tool and
for Windows 7
How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issues
You select Download - SAVE? After download go where you put it and right click
on and RUN as administrator.
Download Service Pack 2 x 86 32 bit
http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=891ab806-2431-4D00-afa3-99ff6f22448d & displaylang = in
Download Service Pack 2 x 64 64-bit
http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=8ad69826-03d4-488C-8f26-074800c55bc3 & displaylang = in
Create a new ADMIN account with your password - same then REBOOT (do not logoff) and
log on to the new account and try the download.
How to obtain the latest Windows Vista service pack
Service Pack Center
If necessary, you can get free reports of incidents however generally above allows to solve this problem.
Windows updates - free Incident report
Go here and click on-> Windows Update fails while searching, downloading or installation of updates
The security updates, you can get free support Incident report
I hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">->
I too have a problem installing windows error1601. I went through the steps to get services and found that this installer of windows is gone. How can I get that back?
Try to run the Windows Installer Cleanup http://www.softpedia.com/get/Security/Secure-cleaning/Windows-Installer-CleanUp-Utility.shtml utility to see if that solves the problems with windows install.
I hope this helps.
Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
I have a problem installing Windows XP Mode in Windows 7 Pro 64 running on a Dell Latitude E6510 laptop with an i5 processor and 8 GB of ram. This machine supports hardware virtualization, and it is enabled in the BIOS.Before downloading software in XP Mode, the MS download required Windows validation Web site. Downloaded and reported validation validation and a successful installation. Then I downloaded Windows XP Mode (WindowsXPMode_en - us.exe, 481 052 KB) installation package and the package of Windows Virtual PC (Windows6 1 - KB958559 - x 64 - RefreshPkg.msu, 16 692-Ko). Then, I installed Windows XP Mode; the installation ran without any problems apparent and reported success.According to the docs of download site, the next step is to: "... click on the Windows 7 start button , and then select all programs > Windows Virtual PC > Windows XP Mode to begin the installation."My problem is Windows Virtual PC does not appear anywhere in the selection of all programs list - believe me, I looked. There is, however, a new directory calledc:\ProgramFiles\Windows XP Mode\but it contains no exe file. It contains a file of 1.2 GB called Windows XP Mode base.vhd - but it is not clear what to do with it. There is also a tutorial subdirectory.I tried to reinstall Windows XP Mode (without uninstalling first) but I just get a warning message that the program is already installed. Windows XP Mode appears on the list "Uninstall or change a program" in the module programs and features in Control Panel.I tried running (Windows6. 1-KB958559-x64-RefreshPkg.msu(Windows6.1-KB958559-x64-RefreshPkg.msu, goal that throws error 0x8007000d, "The data is invalid."If at this point, my question is simple, "what to try next?Thanks in advance.
The right way to install Windows XP Mode, you must first install Windows Virtual PC, and then install Windows XP Mode.
You must install both files:
1 Windows6. 1 - KB958559 - x 64 or x 86 architecture that you run
Restart the system, and then install:
Uninstall Windows XP Mode:
Click Start, type: programs and features
Press enter on your keyboard
Select Windows XP Mode
Click Change/uninstall in the command bar
Uninstall Windows XP Mode
Restart your computer
Proceed with the installation of Windows XP Mode in the right order.
If it does not always show upward:
Click Start, type: enable or disable windows features
Make sure that Windows Virtual PC is checked
Reboot if prompted
problem installing windows 7 finishing installation scope and freeze for hours please helpmy pc req:2 GB of ramNVIDIA geforce 210 1 GB180 GBPentium 4 3.40Help, please
Turn off the computer.
try to start safe mode, start your PC, just before the system loads the Windows operating system. Press the [F8] key function 8 on your keyboard which will launch the menu Advanced Boot Options. Select Safe Mode.
Log, click Start, type Device Manager, press ENTER.
Expand graphics cards
Right-click your video card, click on uninstall.
Restart your system
Log, click Start, type Device Manager, press ENTER.
Expand graphics cards
Right-click your video card
Driver update software; then click search automatically for updated driver.
When I start my Satellite 5105 - S702 laptop with the v220.127.116.11 of antivirus from Computer Associates (CA) software is turned on, I get the following at the end of the boot process error message:
Recovery of the THotkey failed. "
Part took place - TouchED.exe - (THotkeyFindProc)
Function failed - FindWindow)
Error code: 0 x 00031402, 0x00000002
However, when I disable the CA antivirus software and restart the laptop, I don't get the error message.
Thus, it would seem that the CA AntiVirus software causes this error message.
Would be grateful if someone could give advice if they have this problem with this laptop model, or the Satellite 5105-S701, or European equivalent model 5100-603, and how they have rectified it.
I agree with you.
In my view the installed (CA) anti-virus software is not fully compatible with the Toshiba Hotkey Utility or the software anti-virus doesn't recognize properly and can not handle.
CA anti-virus does not for me but maybe you could set some parameters to ignore the Hotkey Utility from Toshiba.
Maybe it helps if not I recommend you contact Computer Associates support team.
So almost six months before my laptop apart to windows update. After that followed problems with the update of Skype and other programs. Then it does not install games and different programs. After canceling the update or install, he know that there is a problem with Windows Installer. I searched the internet to find out how can I solve this problem, tried EVERYTHING, but nothing works.
So I decided to reinstall windows. I have Windows Home premium 64, but when I have donwloaded from different versions of the windows (from version torrent and official) it says that the type of the operating system installed on computer mobile im - one deferred tries to install. Not knowing what to do.
Can anyone give advice?
> Do not know what to do.
According to the specifications of the laptop it came with WIN7 64 BITS HOME PREMIUM so the best thing you can do is to install the original recovery image that you got with your laptop and everything should be ok.
Can you do this?
First of all I'm new here so Hello to everyone here and I hope you can help me with my problems of software.
I recently bought a laptop model Toshiba Satellite A200-1YO provided with windows vista (which must be frank, pants and IMO too demanding for the machine) and I have a problem with vista, because some of its features do not seem to work, for example, I'm having a lot of trouble getting some of the webpages to open now, they simply hang out.
now, I didn't install windows xp but I don't have an external floppy drive. This is not a problem but because I can use Nlite to integrate the drivers in a new ISO of Windows XP.
The problem is that I have 4 sets of drivers: ICH7M_32bit, ICH7M_64bit, ICH8M_32bit and ICH8M_64bit. As I install Windows XP 32-bit while I'm more or less some that I have not need 64-bit drivers but when I install Windows XP by using the modified version of windows xp slipstreamed, what I get at startup is a BSD error telling me that something has crashed on my hard drive , however I can't say which crashed as the screen disappears after 15 seconds if that so I guess there is something wrong with the drivers I use (though I must admit that I'm not sure the drivers 32-bit to use)
advice and assistance regarding being able to install windows xp would be welcome, as I said above, however, I can only use Nlite since I do not have a usb floppy drive.
Satellite A200-1YO has a chip with the ICH8M southbridge Intel GM965.
So you need the driver for SATA ICH8M_32bit.
I have a Toshiba A100 with Windows XP (German) and I would like to clean install Windows XP (English). At the start of the CD installation normally inspects the hardware configuration, but after that it crashes. I left it for 15-20 minutes but there was no response, and then I had to leave the facility.
The installation guide for windows xp says it has something to do with the hardware compatibility. (I tried pressing F5, F6, F7 to skip this step, but did not help)
I tried the same installation CD on the laptop from my friend (of another brand) and it worked! I wonder what is so specific as to the compatibility of equipment for Toshiba laptop with windows xp.
However, my (German OS) recovery CD works great!
Can someone help me on this issue?
How about using google or search in this forum for similar topics
If you are looking for in this forum just for example you will find this link:
[How to integrate a SATA AHCI driver into a Windows XP installation CD | http://aps2.toshiba-tro.de/kb0/TSB85017Z0000R01.htm]
I now that this topic is discussed several times before, but after trying many solutions of the forum and some of my only, I reached a level that it makes no sense...
First off I would like to explain what I do for a living, it has to do with IT and that is what makes it even more tempting for me.
2 days ago a friend bought a Toshiba A200-23W. The first thing I always do when I buy a new laptop is to format it and install a clean Windows operating system.
After my first attempt, I realized that I have to install first the matrix storage driver.
I downloaded the driver from toshiba place related to my model. (Intel Matrix Storage Manager - 18.104.22.1687).
I created a usb key with the required driver files:
in the folder (F6flpy) of the (Intel Matrix Storage Manager) you can copy them to the root of the USB stick.
When the form "Where you want to install windows" windows Vista appear I select load the driver, and then by clicking (Browse), I select the USB drive as source for my drivers.
The (Intel(r) 82801HEM/HBM SATA AHCI Controller) will automatically appear as a choice and by clicking on the (Next) the process of the pilot installation begins.
So far so good..
Here's where things get complicated...
When Vista back to the form "Where you want to install windows", even my system has 2 x 200 GG HDD only 200 GB HARD drive appears in the list...
Selections of 'New' Partition, or a Partition of 'Delete' are disabled.
and even when I click 'Next' for selected HD a windows message:
"Windows has no determine if this computer contains a valid system volume."
I'd appreciate your help...
Thank you in advance...
You cannot format the HARD disk or delete the partition because this would remove the SATA driver too, and the HARD drive would not be recognized by Vista!
Therefore, you need to install the OS on the HARD drive that is displayed in the installation program.
Maybe you are looking for
When I type "f4" my computer wants to change the display to the external display settings. I would use "f4" in excel as I can on all other computers
I'm setting up a spreadsheet of the readings of temperature using DAQ Assistant. When I try to add a timestamp the value placed in the worksheet is always 77. What I am doing wrong? Thank you! Ben
try to install the DTV to pc2 as soon as I try to play, it crashes the works of pc radiofor digital fine.ive just tried reinstaling, tried to campatabilaty question. I tried 64-bit and 32-bit windows
Hi, I have a home network of 3 computers connected through the switch. Both computers have Windows 7 and the other is under Vista. My Question is that when I try to access shared folders on my other computers while on my Vista PC, he asks me a userna
Hello. After about a week after the system recovery, my computer tried to install updates 110 and stuck on number 56 for more than 3 hours. If I disconnect the battery and restart the system stuck halfway through the Configure updates - again for sev