Problem installing XP on Tecra 9000 battery

Similar Questions

• Bios Tecra 9000 battery empty

  Hello, can someone help me, I'm looking for a CMOS battery for my Tecra 9000; computer laptop didn t recognize the Date and time if I boot it. The Message is: bad battery RTC, the incorrect checksum, check the system, and then press the F1 key. I tried to buy a battery online in Germany, but I can't find a dealer here.

  Hello

  It's not easy to find a good dealer. I assume it can be stopped only by the authorized service partner.

• Tecra 9000: Problems with 2nd Battery Pack in Slim SelectBay

  Hello

  When I insert the second battery (PA3074U-1BAT) in Slim Select Bay the battery does not charge and is not recognized by the Tecra 9000 laptop: status led on the front is not lit.

  If I insert the DVD of Tecra drive for example, everything works fine.

  I know that the battery is 100% working since I put it in another Tecra 9000 occurs flawlesly.

  Why doesn't the laptop to work with the second battery? Any ideas?

  Thank you.

  Hello

  I put t knows exactly why the second battery does not work in your Tecra 9000, but I found another display created by your all about this Tecra 9000 and looks that you have disassembled the laptop, and maybe you have damage or not connected something.

  In my opinion, every single computer laptop part should be checked again!

• Issue when installing fresh Windows XP on Tecra 9000

  I have a Tecra 9000 running Linux.

  I would like to install windows XP but the Setup CD I charge readers and then crashes to windows is the loading screen. I have no recovery disks or driver for this computer as I bought it used. and I don't know why he struggled.

  The SN for the unit is Z1086914G ST900-0.
  I have read forums about similar problems and think it might be the chipset driver for the HARD disk.

  I can't find a driver for nowhere so I can't try this line of thinking.

  Anyone has any ideas.

  Hello

  As I remember the Tecra 9000 does not support RAID or SATA controller that would require RAID or SATA drivers, so I put t think that your problem is related to the missing driver

  Have you tried to install Win XP SP2 from container?
  Are you sure that the HARD drive is OK? I think you should check the HARD disk for some problems initially.

• Sound problem with Tecra 9000 on Win XP SP2

  Hello!

  First! Excuse me for my English!

  I am trying to install a Tecra 9000 with Windows XP SP2. The problem is the noise. My XP does not recognize the sound card, I am trying to install the drivers, but the system answer me 'the driver was not installed' and I don't know how can do to his works.

  I read a few post on the forum, but I can't solve this problem.

  Could someone help me.
  Thank you!

  I think this doc Toshiba should help you:

  [Windows XP Service Pack 1 and 2 incompatible with existing Yamaha driver sound | http://askiris.toshiba.com/ToshibaSupportSite/search.do?cmd=displayKC&docType=kc&externalId=2772 91xml & sliceId = & dialogid = 54976777 & stateId = 0 0 52121258]

  There is a link to a driver that should help to address this problem.

• Tecra 9000 running W2k - driver for the Audio controller problem!

  Help, please!

  I have a laptop Toshiba Tecra 9000 and recently discovered that the sound was no longer working. I'm not sure exactly when he first stopped working, but believe it was with MS Windows 2000 Updates or when cleaning PC after spyware attacks. While they inspected the real device (Yamaha AC - XG Audio Device), it has each if useful ""! "with a ' Code 10 - device cannot start", in the "Device status" screen
  I removed the device and allowed windows to detect & install, without success, then downloaded and tried many devices and generic drivers, drivers and
  even later as suggested on a Web of Toshiba site, I find
  http://EU.computers.Toshiba-Europe.com namely;

  Driver date: 22/05/2001 Version: 5.12.1.2138

  I'm at a complete loss as to why it has stopped working and what to try next to try and solve the problem. Any
  help or advice would be greatly appreciated.

  Concerning
  K

  Hello

  It is possible only after the installation of the MS Updates that the audio driver is blocked by a load of your system and no sound can be heard.

  If you want you can try to install this driver:
  http://drivers.Soft32.com/driver/download-Yamaha_AC_XG_Generic_Drivers_for_YMF753_743_752-24609.html

  It is useful after installing SP2. I don't know if this will help in your case, but you can try it.

  Good bye

• Problem WLAN Tecra 9000

  Hello

  I have finally narrowed it down to my performace Tecra problem to the WLAN card and ask advice on what to do.

  The symptoms are so: If the wireless card is active (not in market, just installed and active) the PC freezes for about 15 seconds every 60 seconds. (WLAN itself works very well when the PC has not locked up.). This is no immeidate (after priming) but will kick some time in the next few hours.

  Looking at the Task Manager, the 'system' consumes 100% of CPU for three seconds separated from 4 points (which blocks everything upward) and it returns to normal for 50 seconds and then it repeats.

  If I go into Device Manager and disable the Toshiba Wireless LAN mini PC card, the problem is immediately disappears.
  When I try to re - activate the map (sometimes), the computer crashes with system 100% CPU usage.

  Thanks for your suggestions

  R
  Tecra 9000 MB 784. 40Gb, XP SP3.
  Driver WLAN is Aegere System 7.82.0.550

  PS When the PC is cold started with the WLAN card enabled, the PC and the WIFI works very well for a while (an hour or two) then the symptoms kick gel.

• Tecra M4 - battery problem

  Hello

  My Tecra M4 battery appears to discharge on his tours off the coast. If I charge it to 100%, then unplug it and don't use it for about a week when I come to turn it on it used and I need to connect to the mains. When he dose get Windows reports 0%. It seems to lose about 15-20% per day of power turns off.

  Anyone know if this is normal for this model of if there is probably a problem that I have to look at the dose.

  Thank you

  David

  Hello

  This is definitely not normal. I think you need a new battery. That this be enabled by service. You still have warranty, so it will be free.

  Good bye

• Tecra 9000 has improperly installed keyoard. How can I change?

  On my 2nd hand Tecra 9000 Pg UP / Dn, etc. end keys do not work. I poked a bit aroud and deduce what is it because the LapTops4Less have installed a keyboard key or Microsoft Natural PS/2 101/102.

  I can't get rid of the old keyboard (uninstall, reboot just let the keyboard there) and I can't find a new keyboard to install (Control Panel-> add hardware).

  Control Panel-> keyboard was told that drivers will be uninstalled when the machine is restarted. However, I reboot the machine, and nothing changes. Do not allow 'add a keyboard '.

  I can't find any keyboard drivers on the Toshiba site so please, how to get the good installed keyboard or, maybe install a standard laptop keyboard and simply use it. ?

  TFAI
  R

  Hello

  In my opinion there is nothing wrong with the keyboard driver.
  The case is simple... The malfunctioning of your computer keyboard.

  I'm sure that if you replace the keyboard with one compatible, then all buttons working again

  Then contact the ASP in your country and order the new keyboard for this device.
  A keyboard replacement is not difficult, but if you n t know how to do this, ask a technician for financial assistance

  All that s I put t see no reason for a discussion

  Concerning

• Possible CMOS problem on Tecra 9000?

  Hello

  I have a Tecra 9000, which so far has been superb. However, in the last days when it starts cold, I see a message that says "Bad Checksum (ROM) and mew asking you to press the F1 key to access the configuration." I do, and then press end and Y, the machine then boots fine in XP. Date and time are very good. I tried to Flash the BIOS, but I already have the latest version and so it will not let me.

  Someone at - it ideas? While its not stop working, it's annoying!

  Thank you very much
  Greg Thomas

  Hi Thoma

  It seems that your BIOS battery is defect. There is no way that laptop to save the BIOS settings. Please contact Toshiba Service partner. They can fix. There is no single way to do it.

  Good bye

• On my Tecra 9000 display driver problem

  Hey guys

  I wonder if you could help me. I have loaded a new copy of Windows XP Pro on my Tecra 9000, while configuring I unchecked accidentally the Windows display driver option. Now, every time I start up the laptop I have, but the OS is still running in the background. Is there anyway to get my screen back?

  Thank you and I hope to hear from you soon

  Hello

  Did you use an original Microsoft Windows or the recovery CD provided?
  In my opinion, you must use the recovery CD because it has all the necessary drivers for devices to unity.
  If you installed the original operating system from CD of Microsoft Windows, you must download and install all Toshiba drivers after installing the OS.

  Good bye

• Tecra 9000 - sound problems

  Good then I obviously have my tecra 9000 series PC laptop and im trying to get the sound to work. Nothing don't is going on so I thought he might have a sound deseased... So I replaced it with a brand new sound Board in which cost $107 *. Anyway, so I replace it, install it and still does not =]
  All useful suggestions out there?

  Hello, Sire

  Have you seen errors in Device Manager or any yellow exclamation?
  If so, the audio controller is faulty or the driver is not installed.
  Have you installed the audio driver? This driver, you will find on the Toshiba site.

  Good bye

• Tecra 9000: SD card reader does not work with XP

  I've made some progress on this issue, it seems that Cardbus devices cannot share IRQS, although the main problem is that FFDFB200-FFDFB3FF memory address is shared by the SD card controller and device memory SD card. Unless we find a way to edit the registry to resolve this conflict of memory, the simple answer is that the SD card reader does not work under XP.

  I think that it would take a major surgery of the register or re-writing of drivers to move the address of memory used by the SD card device, I always work on this for now.

  Can someone support Toshiba or Toshiba Marketing explain to me why my Tecra T9100 has a "Designed for Windows XP and Windows 2000" sticker on it, when Toshiba does fully support XP on the 9000 series?

  David

  [Edited by: admin]

  Hi David

  Unfortunately, I n t think that you will find here a Toshiba marketing person or other departments. It is ONLY a user to user forum.

  What you say, it is simply NOT true.

  The Tecra 9000 was delivered with 3 different OS.
  It was delivered with Windows XP Pro, W2k and Win98. You can order all the images of this Toshiba home Toshiba service partner. That's why Tecra 9000 does support Windows XP!
  Tecra 9100 has been bundled with Windows XP and Windows 2000 and also supports Windows XP!

  Of course, there are different models with a different hardware configuration, but all supports Windows XP.

  I put t know why you get this error message or why you cannot use the SD card, but I guess you don t use the image of Toshiba. That's why you installed your operating system isn't properly. Because you are a newbie you don t know the Toshiba all the driver installation must be done in the right order and all Microsoft QFEs must be installed also.

  As you can see you must pay attention to many important things if you want to manually install the operating system.

  Good day

• Standby power 7 Tecra 9000

  Hello world

  I realized that newer versions of Toshibas Power Saver
  available for the new notebooks Tecra. I use Power Saver 4 on my Tecra 9000. I just tried to install the latest version of PowerSaver on my Tecra 9000. Installation seems to work, but after completing the procedure, an error sound due and energy savings has not started properly, but I have no massage error. If I try to run the energy saver manually I don't receive a massage of error, that I don't have permission to start the process!
  Is it possible to install and use a newer version of the saving on the Tecra 9000? What is the latest version that I can use on the Tecra 9000? I hope that no version 4?

  Best regards

  Mason

  Hi Matty

  Can you please tell me do you have had problems with energy savings? For each series of notebook for each laptop model there are aligned in each model versions, and you can use only the energy savings that are made for your model of 9000.

  Believe me, the best version for your Tecra is the version that you can find on the CD tools & utilities. If there is no problem with energy saving, it is not necessary to make any update.

• Tecra 9000 display driver

  Hello

  I recently acquired a Toshiba Tecra 9000. I added a new 40 GB hard drive and installed Windows XP. The standard display driver does not allow me to connect an external monitor to extend my Windows desktop on 2 screens, so I downloaded the latest driver on this site. However, when I try to install the driver (S3 Graphics SuperSavage/IXC 1179) a hardware setup error appears saying this driver has not passed Windows Logo testing to verify the compatibility with XP. There is no other driver to select on the Toshiba site, so I installed the driver. At first, everything seemed ok, but today my laptop has projected Blue 6 times within the last hour. I've now uninstalled the driver and have not had any problems. However, because I have everything installed display drivers display is basic at best.

  No one else has this problem with the display driver for a Tecra 9000 with XP? Or anyone knows other drivers compatible with my model?

  Thank you

  It's very strange! All the drivers on the Toshiba download page are the same as the CD Utility & Tools.
  Is your TECRA 9000 a European model?
  Try using the driver CD tools & utilities. On this way, you'll be sure to use a right.