Problem into a problem: the System 32 error and Start Up Repair error (VISTA)

Hello, on a reboot of my computer yesterday, I came with the System32/config/system is damaged or missing error on boot the system.  I tried a few solutions that can or could not apply, such as commands to the command prompt and reboot system Windows RE tool.  None have worked and false start in the repair process.  A description of the error, try a Start Up Repair less than a minute by:

Problem event name: StartupRepairv2

Signature of the problem 01: external Media

Signature of the problem 02: 6.0.6001.18000.6.0.6001.18000

Signature of the problem 03:0

Signature of the 04:65537 problem

Signature of the problem 05: unknown

Signature of the 06 problem: NoOSInstalled

Signature of the problem 07:0

Signature of issue 08: 1

Signature of the 09 problem: difficulty of Partition Table

Signature of the 10:1168 problem

OS: Version of the 6.0.6001.

Locale ID: 1033

So, if there are solutions outside the Startup Repair tool, I would apreciate gretaly them.  I hope not to lose all my files with a new facility.  Finally, I would be able to upgrade to Windows 7 in this position (fixing the problem)?

Thanks in advance for any help.



you need a system upgraded to windows 7 from vista operational management

Data recovery

1. remove the hard drive and it slave in another computer

2 buy or borrow a USB disk drive hard put in yout case then plug it into another computer and read the hard drive like this

3. try Knoppix


BUT this method 3 depends on your hardware in the computer that failed

Tags: Windows

Similar Questions

  • I have a license of a vector, but the file is damaged and cannot be repaired.

    I have a license of a vector of Stock and when I import it into Illustrator says "the file is damaged and cannot be repaired." I need to edit the vector in illustrator and import it into indesign. I log off CC and reconnected I know sometimes that's helped before with images but that did not work. At the same time, I also registered 2 images that work well, but not the vector. I have the license of your web portal, not the application, but I don't think that should make a difference. Any ideas on how to get this vector to work? Thank you.

    The number is #50433877. I had to call customer service and they couldn't get it to work either. They ended up giving me a credit and I've used a vector that is similar to the for replace. Strange preview works perfectly, but when I have a license for it, it broke.

  • "The system 5 error has occurred. Access is denied. "message on cmd on Window7 64 bit

    I install Microsoft.Net FrameWork 4.5 It says Error Code HRESULT: 0xc8000222.
    So, I find how to sove this error on Google.I found answer. This response is below.

    1. open cmd
    2. type in the command "net stop WuAuServ" (disable windows update)
    3 go to run (you can do this by pressing Win + R) and type '%windir%' (this command let you go in your windows system folder)
    4 find the folder "C:\Windows\SoftwareDistribution" and rename it to "SDold".
    5 then return your previous command prompt and run the command "net start WuAuServ.
    6. now, try to reinstall .NET Framework

    I also found the error the holder cmd, type "net stop WuAuServ".
    "The system 5 error has occurred. Access is denied. "message on cmd.

    Please help me

    Hello! Try running cmd as administrator. Click Start and search cmd. right-click and then select run as administrator. Then try the command again. Worked perfectly for me. :)

  • The system is slow and erratic.

    I tried to get a restore point before 9-26. This is the date which probably the issue of java tried to enter my system several times a day, every day. The system is slow and unstable. I run scans, everything is clean. I don't know what svchost.exe is, but there is an error notice that arise, 5608-5312, application error. There is also an error message for the so-called "runtime".

    An analysis of the registry and repair came up with several errors in registry.

    I need help!


    I tried to get a restore point before 9-26. This is the date which probably the issue of java tried to enter my system several times a day, every day. The system is slow and unstable. I run scans, everything is clean. I don't know what svchost.exe is, but there is an error notice that arise, 5608-5312, application error. There is also an error message for the so-called "runtime".

    An analysis of the registry and repair came up with several errors in registry.

    I need help!


    Two points:

    1. What did you perform analyses with? Not all anti-virus and anti-spyware programs are just as good, and some of the more popular are among the worst. There is a good chance that your problem is caused by a malware infection.

    2 ignore what the RCS registry said that you are errors and do not run this software once again.  Registry cleaning programs are * all * snake oil. The registry cleaning is not necessary and dangerous. Let alone register and do not use any registry cleaner. Despite what many people think, and what software record cleaning providers are trying to you convince to have used the registry entries is not really make you hurt.

    The risk of a serious problem caused by a registry cleaner by mistake delete an entry you need is much greater than any potential benefit it may have.



    and also

    Let me stress that neither me nor anyone else who warns against the use of registry cleaners has never said that they always cause problems. If they have always caused problems, they would disappear from the market almost immediately. Many people have used a registry cleaner and never had a problem with it.

    The problem with a registry cleaner is that it carries with it the essential * risk * to have a problem. And since there is no advantage to using a registry cleaner, running the risk is a very bad deal.

  • I ran the system analysis tool and without result updates still won't work.

    * Original title: Windows 7 updates

    It seems I'm not the only one having problems with the updates of Windows 7. I ran the system analysis tool and without result updates still won't work. Is it possible miss me a the question .dll file not showing? I googled about it and still nothing.

    Appreciate any info someone might have on this

    Are there specific error messages or error report numbers given when it fails, or is it just apparently running, but does not find anything?

    If it is running, but apparently not finding anything, just leave it for a while 'loooooong. It was reported a few recent Wu take many hours to find anything, esp if she has a lot of updates to find and install.

    If its reports an error/message number, what (exactly) do report?

    Something to try:

    Update your anti-virus software and run a full scan. Then:

    If its doesn't work, check that service 'Windows Update' and 'Background Intelligent Transfer' are listed and running, according to the instructions of the ' how to check if services are running' section of this article - IF you have actually the error referred to in article, try the FixIt.

    If WU and BITS services are listed and running, try to reset the Windows Update components -

    If still no joy, run the update utility - what makes as that report?

  • There was an error opening this document. The file is damaged and cannot be repaired.


    I searched the forums, and this mistake has been examined in the context of how to treat a damaged PDF file.

    My question is a little different. The company that I am working has a tool to create what we call "knowledge base articles", i.e. product XML authoring with us help topics. They used this tool from 2008. Files can be attached to a topic. The XML files and attached PDF files is stored in a SQL database. Using the TOC Panel or the search function, relevant topics are retrieved.

    When there is an attached PDF, users can view the PDF in the browser or download the file and open it locally.

    The knowledge base has been moved from an environment of database SQL 2005 in Windows Server 2003 and IIS 6 for an environment database of SQL 2008 R2 to Windows Server 2008 R2, IIS 7.

    Now that we have the following problem: in some subjects the downloaded PDF can't be opened and one error

    "There is an error opening this document. The file is damaged and cannot be repaired. "is displayed. The curious is that some PDF files published this error, while others open without a problem. Source file all PDF files open without a hitch before they are downloaded.

    Any advice or pointers would be very appreciated.

    TIA, Donna


    as you have probably read in a lot of discussions on this matter, this error message is usually correct, and the PDF file is damaged. As for how it gets damaged, it's something you need to know by poking around in your system. Here are a few general things that always apply when working with corrupt files:

    The first thing I would do is open such a file corrupted in a text editor such as NotePad to see what it actually contains. Any valid PDF file must begin with '% PDF -' followed by a version number. If you don't see that in the first line, then you are not dealing with a PDF file and you know why you do not get the file saved in your knowledge base.

    If this string is there, then you know that there a PDF file and the issue is somewhere in this file, and is where it gets much more complex. You will need a good understanding of the PDF specification to parse the file to see what is wrong with him.

    If you're lucky, you'll actually have a file of length zero (which means also no PDF header). No valid PDF file cannot be zero bytes long. Your second chance case would you find in fact an HTML error in this file (instead of PDF content), that tells you the reason for the problem (but again, this depends on your system).

  • The CPU usage reaches 100% and the system locks requiring a hard restart on Windows Vista

    All of sudden the CPU usage reaches 100%, which makes the system dead slow and finally the system stops responding. I have to do a hard reboot to continue using the system.

    I tried to open the Task Manager to see if there are programs or services running that can consume resources and found nothing. The remains of number of CPU use, the graph to use but less than 10 years is hovering at 100%.

    I did not change my system.

    The problem appears on the two accounts that I installed on my operating system.

    I removed all the unwanted programs since the system was started.

    I have McAfee Antivirus installed for more than a year now, and the latest antivirus patches have been installed.

    Help, please.

    Thank you in advance!


    What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
    on this machine, including those you have uninstalled (they leave leftovers behind which can cause
    strange problems).


    Follow these steps:

    Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

    Enter this at the command prompt - sfc/scannow

    How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
    generates in Windows Vista cbs.log

    Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

    How to run the check disk at startup in Vista


    After the foregoing:

    How to troubleshoot a problem by performing a clean boot in Windows Vista
    How to troubleshoot performance issues in Windows Vista

    Optimize the performance of Microsoft Windows Vista
    To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
    Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
    reference (if you have a small box at the bottom left - show for all users, then check that).

    How to check and change Vista startup programs

    A quick check to see that load method 2 is - using MSCONFIG then put a list of
    those here.

    Tools that should help you:

    Process Explorer - free - find out which files, key of registry and other objects processes have opened.
    What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
    each process.

    Autoruns - free - see what programs are configured to start automatically when you start your system
    and you log in. Autoruns also shows you the full list of registry and file locations where applications can
    Configure auto-start settings.
    Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.

    There are many excellent free tools from Sysinternals

    -Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
    When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
    Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
    a program that runs in your Windows startup.

    There are many excellent free tools to NirSoft

    Window Watcher - free - do you know what is running on your computer? Maybe not. The window
    Watcher says it all, reporting of any window created by running programs, if the window
    is visible or not.

    Many excellent free tools and an excellent newsletter at Karenware


    Vista and Windows 7 updated drivers love then here's how update the most important.

    This is my generic how updates of appropriate driver:

    This utility, it is easy see which versions are loaded:

    -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
    For each driver in the list, additional useful information is displayed: load address of the driver,
    Description, version, product name, company that created the driver and more.

    For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
    Control Panel - device - Graphics Manager - note the brand and complete model
    your video card - double - tab of the driver - write version information. Now, click on update
    Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
    Uninstall - REBOOT it will refresh the driver stack.

    Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
    with their own software and drivers and all other main drivers that you have.

    Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
    Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
    BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

    Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
    each installation.

    Always check in the Device Manager - drivers tab to be sure the version you actually install
    presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
    in particular that) so to install a driver - reboot - check that it is installed and repeat as

    Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
    manually by model.

    Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.

    How to install a device driver in Vista Device Manager

    If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
    Updates, that leaves about Windows updates but it will not install the drivers that will be generally
    older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
    get new manually if you wish.

    How to disable automatic driver Installation in Windows Vista - drivers (WS.10) .aspx

    Hope these helps.

    Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

  • IBM think centre @ request for initialization of the system user password and a genius set the bios to lock keyboard can it is bypassed and how?

    Original title: IBM think centre @ start request.

    IBM think centre @ request for initialization of the system user password and a genius set the bios to lock keyboard can it is bypassed and how?

    Hi brandon1980,

    I recommend you contact your computer manufacturer for assistance. The manufacturer would be able to give details about the BIOS (Basic Input Output System) and find out if this feature can be disabled.

    Hope the helps of information.

  • How can I get the "network" icon in the taskbar? The box of 'network' in the bar of tasks and Start Menu Properties; Notification area; System icons, will not respond to what it is.

    How can I get the "network" icon in the taskbar? The box of 'network' in the bar of tasks and Start Menu Properties; Notification area; System icons, will not respond to what it is.

    Use this tutorial:

    Go to method 3.

    3. for the network icon.

    (B) to activate the icon network - Enable_Network.reg< click="" to="">

    * Don't forget to restart to complete the procedure. ***

  • Envy 17 2180el can I add a second hard drive, and then choose bios/boot of the system with which to start?

    Envy 17 2180el can I add a second hard drive, and then choose bios/boot of the system with which to start?

    in the case give me the link of a hard disk of type to add


    While you can certainly add another HARD drive in the Bay of secondary drive (you must also support and the connection cable) you can't boot from it - only in the Bay of primary HARD drive is bootable.

    Kind regards

    DP - K

  • Adobe PDF stands up and says "the file is damaged and cannot be repaired" works great in IE9.

    Open an Adobe PDF file on this site: and this specific PDF comes up with the "file is damaged and cannot be repaired: JAN30-EUR/USD bearish reversal Pattern triggers in... - MIG Bank.

    It helps if you change the setting 'Always ask' or 'Save file' for the PDF in "tools > Options > Applications" and open the file saved in the Adobe Reader software?

  • What are the causes videos stop and start again during the transmission?

    What are the causes videos stop and start again during the transmission?


    You can update the latest drivers for the video card and check.

    Also perform the clean boot and check:

    NOTE: When you are finished troubleshooting, make sure that restore you the computer mode normal startup such as suggested in the article above.

    Let us know the results.

  • XP pro have two problems: the system restore will not work and rdpclip seems to work computer

    I had a virus, trogan, stopzilla online to fix the problem after allowing access to my computer, (it's a virus) tried to uninstall this program, finally just disabled and removed from the start menu.

    Now, in the pc Registry mechanic tool the first thing listed is rdpclip as run from my computer.
    Since that time I have been unable to use system restore from windows system.   only restore I access is
    from backups of registry mechanic even if I went and set on system restore after that I checked the settings and discovered that they had been handed over to OFF.
    I used the restore before so I know it worked before the access help online.

    Is the solution just to disable repclip?   I have access to my computer so that I have to allow access by external connection...
    computer programs run more slowly, there is always time to wait before the update when I try to use wp-admin to make changes on my Web site.

    Former title changed, but explains the problem
    XP pro, has had a problem with virus removal program, it turned off because it wouldn't uninstall.  Now when I run Registry mechanic it shows my system being run by rdclip.  I can't use the windows system restore.  Points on the calendar are lit up but do not work.  Can I use mechanic registry to disable the rdclip? in auto start menu?  If so this might restore ability to use the system restore?


    1. you receive an error message when running the system restore?
    2. which antivirus app do you use?
    3. what happened when you try to uninstall the program?

    4, are service packs installed on your computer?
    To uninstall the application:
    Method 1:
    Run the hotfix, restart the computer and try to uninstall
    Problems with programs that cannot be installed or uninstalled.
    Method 2:
    I suggest to keep the computer in a clean boot state and check the status of the issue.
    How to configure Windows XP to start in a "clean boot" State
    Note: After you have used the boot is a way to solve your problem, you can follow these steps to configure Windows XP to start normally.
    I also suggest that you scan your computer with the Microsoft Security Scanner, which would help us to get rid of viruses, spyware and other malicious software.
    The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.
    Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.
    Important: While perform analysis on the hard drive if bad sectors are found on the hard drive when parsing tent repair this sector if all available on which data may be lost

    To solve the problem of system restore:
    I would sugggest you to go through the link following.
    Steps of troubleshooting for problems when you try to use the System Restore tool in Windows XP.

  • Vista Home Premium problem: the system automatically restarts

    I have a Toshiba Satellite A200 with Vista Home Premium installed on it. I bought it about two years ago. Last month, the laptop always automatically restart. Although I restore the system to its factory, the problem still exist. I also use recovery disk, but it has not solved the problem. And then I intend to reinstall my vista Home premium. However, I don't have an installation disc. This is because as my laptop with Vista Home premium pre-installed on it. How could I get a vista installation disc Home premium? If I contact the manufacturer (Toshiba) or you can get it from Microsoft?
    Thank you


    original title: problem Vista Home Premium

    If the laptop comes with Vista Home Premium installed, then do a restore to factory re-installed this program.

    Go to start / computer / system properties and read what is installed on your system.  It's probably Vista Home Premium.  You don't need the disk to re - install anything else (and recovery options will not solve the problem if a full restore to factory settings did the trick).

    You can get in trouble with your device drivers (but I doubt it). Go to the Device Manager by going to start / find and type Device Manager and enter and then double-click on the program icon that appears.  Check each device to a red x, yellow! or white?  These identify devices with problems probably (drivers, but also of conflict or something else).  Click on each for more details and troubleshooting tips.  If you need to get drivers (and you need you to do all you have time to do - they help way beyond simply solve this problem), let the computer dealer or the manufacturer of the device (NOT of Microsoft Updates).  In fact, you must disable automatic updates in Windows Update driver as follows: Follow these steps to get the drivers:  Once you have the drivers, you can install them via the Manager device as follows:

    It seems to me like some kind of hardware problem which is the cause after what you did to remedy.  If the above does not work, then I suggest that you take it for a repair of computer diagnostic and repair shop.  Make sure that you back up your first data as they can wipe the hard drive clean for their efforts.  Before that, you can contact the manufacturer to see if they can offer advice or suggestions (and check how their use to maintain the machine would cost).

    I hope this helps.

    Good luck!

    Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • I submitted a problem (the No. URL window) and in the response email, I clicked on the link that says "no, this does not solve my problem" but when I tried to put the actions that I took (which were unsuccessful) I get error "Must choose the subject line"

    I did the "Restore Default Toolbar" without success. I've updated my Java without success. I uninstalled HP Gizmo web printing which the Add box it says incompatible with Firefox 3.6.6 - and I still have no back arrow or window URL. I guess I'll have to go to the Chrome browser because I refuse to use MS Explorer. I enjoyed Firefox while IT WORKED, but if there is no window to the URL, it is useless.

    This has happened

    Each time Firefox opened


    User Agent

    Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0; .NET CLR 2.0.50727; .NET CLR 3.0.4506.2152 .NET CLR 3.5.30729;. InfoPath.2; .NET CLR 1.1.4322; OfficeLiveConnector.1.4; OfficeLivePatch.1.3)

    The URL/address bar and previous/next buttons are both on the Navigation toolbar; See below.

    Don't see the menu bar not (File, Edit, View, history, Favorites, tools, help)?
    Turn on/off the menu bar is a new feature in version 3.6.
    (~ ~ Red: Linux and OSX see ~ ~: what happened to the file, edit and view menus? )
    Windows Method 1. Press and hold the key and press the letters of the following in this exact order: V T M
    Windows method 2 Press and release the button. The Menu bar is displayed; then choose ~ ~ red: V ~ ~ iew > ~ ~ red: T ~ ~ oolbars and click on ~ ~ Red: M ~ ~ enu Bar.
    The menu bar should now be displayed permanently, unless you turn it off again using view > toolbars. Check = not displayed, NO check mark is not displayed.
    Navigation, bar toolbar bookmarks and other toolbars under view > toolbars. By clicking on one of them will place a check mark (display) or remove the check mark (not shown).
    To display the status bar, view, and then click status bar to place a check mark (display) or remove the check mark (not shown).
    Mode full screen

    See also:
    Back and front toolbar buttons or others are missing
    Customize controls, buttons, and Firefox toolbars
    How to customize the toolbar

Maybe you are looking for