Problem Lenovo Z500 USB 3.0 driver under Win 7 SP1

Similar Questions

• Pavilion dv7 4060us: dv7 4060us graphics driver under Win 10

  I may be beating a dead here horse I did a bit of research on this issue, but I thought I would try once more on the HP forums.

  I have a good Pavilion dv7 4060us I use to transport my QuickBooks files and inventory with me at the customer site, or when I'm away from the office. I bought it in 2010-2011 because of its performance and price point. The fact that it is a mobile entertainment isn't really the problem. By that I mean I played a DVD or two on it, but that is not its primary mission.

  Having said all that, I, as a Microsoft Insider (aren't we all?) I tried Win 10 since last October. I have five other computers in my company to update to Win 10 very well. Desktop computers.

  But, and I knew better, I leave my dv7 update win 10 home (Win 7 Home) update the graphics drivers under Win 10 HP, even tho ' the review date seems to be August 5 (or 8) 2015, seems to not work. The laptop uses generic LCD drivers from Microsoft. Not the end of the world, but I wonder if anyone has found a way to resolve this display problem. I see that wil HP does not support for this combination hybrid AMD card (5650/4250 HD). I used the Compatibility Mode in the past with some success. In any case, this post was long enough... I can roll it back to Win 7 Home, but I really don't like the appearance of this computer entertainment.

  Any thoughts, or should I just shut up and go away?

  Thank you, DD

  I appreciate your concern for my situation, thank you. I did all of this, including finding a compatible driver supposedly this material on the website of AMD. When I looked at AMD site this month / last month, they said that they will not only support the material under Win 10 (said the same HP, actually, but I'm stubborn). Imagine my surprise when I found that the site would allow me to download a driver today for the HD 5650/4200 under Win 10 64-bit. But it doesn't install properly, be and gives me the same dialog box: No. AMC graphics driver is currently installed or it is not working properly.

  Maybe I'm not fluent in the AMD/ATI products and update I'm with nVidia graphics, I use in my other machines without any problem.

  In any case, I thank everybody help, but I spent too much time on this question; I'm done. I can use the 4060 as it is. Former systems engineer, I felt sure I could fix it but apparently not. In any case, no worries and thank you!

  Kind regards

  DD

• Problem Lenovo Z500 in Windows 10

  Hello, I have windows 10 there is a problem with the webcam, drivers windows regularly the image flickers, and if you put the driver from the official site 6.2.9200.10192/3.12.1023.1 06/01/2013 the camera, the image becomes black and white

  You have the Youcam software installed?

  In addition, you can try to install the most recent driver that officially support Windows 10 but which is originally intended for another model http://support.lenovo.com/us/en/downloads/ds103782

• P10-804: driver under XP Pro SP1 installation problem

  Had a hard drive crash, so I had to reinstall everything and decided to abandon the XP home to XP Pro.
  I have download all the drivers from this site (following options: laptop product type;) Family by Satellite; Series of products P; Model P10; Xp Pro operating system. Driver type Country UK. Language English;
  Install Xp and then set about installing the drivers.
  Unfortunately, many of them produce a message "can not be installed on this system.

  More precisely:
  Touch Pad on / off says "cannot install this version of the key we / Off utility to your system.
  Management of the Bus system says "integrated the SM bus driver is not compatible with cards of Bus SM installed on your system"
  Standby power controls said 'Impossible to install this version of the Toshiba Power utility by integrating your system'
  and there was another which I don't remember.

  Therefore, the device manager tells me that
  Other devices: device Base system; SM Bus controller. and (USB) Universal Serial Bus controller do not installed the drivers.

  Why the these drivers are not compatible with my system?
  Where can I get the proper drivers from?

  TFAI

  PS: And in addition, is not at all clear how to install the driver for the SD memory card (there is no .exe)

  Hello

  First of all something about the installation of the reader;
  You need not always all .exe files for installing the driver. If the setup.exe is not available, you must install the drivers in Device Manager. There, you have to choose the device and install the driver.

  I m not 100% sure why you can not install the drivers but it is very important that you need to install drivers in the correct order. The chipset driver must be installed at the beginning.
  Also, I noticed that there are several driver updates. For example of the Touchpad, utility, energy saving, etc., you must use the right version. (latest version)?

  Also check the update of Microsoft Windows XP SP2 fact sheet.

  Good luck

• HP pavilion g6 2242sa USB 3.0 driver for Win 7 64 bit

  Dear Sir.

  I have a problem for USB 3.0 my computer. It does not work, and I do not have a driver that is perfect from the HP website. It's a HP Pavilion computer 2242sa g6 and I have a Windows 7 64-bit operating system.

  Please help me.
  Thank you to for your cooperation.

  Hello

  Download and install the AMD Chipset driver from following link.

  http://support.AMD.com/en-us/download/chipset?OS=Windows%207

  Once the installation is complete, restart the laptop.

  Kind regards

  DP - K

• R400/T400/T500/W500 - problem with Intel GPU 8.752.4 with Win 7 SP1

  Windows 7 SP1 was released to TechNet/MSDN subscribers (which includes the dreaded KB2028560 update)... Hope Lenovo Gets a hand on it and start working on the new drivers.

  
  

• Problem with USB 2.0 Driver

  I'm having a problem with the USB 2.0 driver. Whenever I connect my USB drive, I get a notification of an unknown device and I also used the troubleshooter to solve problems, but he said-

  An unexpected error has occurred. The Troubleshooting Wizard can not continue.

  Identifier of the package: DeviceCenterDiagnostic

  Path: unknown

  Error code: 0 x 80070002

  Source: engine

  User: Chinmaya-PC\Chinmaya

  Background: high

  Every time that I find this error code while troubleshooting the USB 2.0 driver. I even tried reinstalling the driver, but it's the same thing over and over again. I also tried to install Microsoft Fix it, but it won't install, it says "Microsoft Automated Troubleshooting Services BootStrapp has stopped working". Someone at - it this same error? I can't even connect a USB on my computer because of this error.

  If anyone has an answer, I would be very happy to know.

  Hello Chinmaya,

  Thank you for the update on the issue.

  Before any change in the registry, I highly recommend you back up the registry. You can see How to backup and restore the registry in Windows as described in the previous answer.

  UpperFilters and the LowerFilters are assigned values in registry keys. Upper filter drivers go between the operating system and the principal driver, and the lower filter drivers between the driver and the hardware.

  You can try the suggestion and let us know the result, we will be happy to help you.

  Thank you.

• USB 2.0 drives not recognized since the latest Windows updates

  I tried 4 different USB 2.0 on 4 different and no computers drives won't recognize readers for the latest Automatic updates.

  1 PC with Win 7 64-bit all service packs

  2 computer laptop w / Win 7 32 bit all service packs

  3 laptop w / Win 7 64-bit all service packs

  4 desktop w / Win XP Pro 32 bit all service packs

  All versions are professional, all devices are fully patched and recognise the mouse USB, HD', other USB devices.

  3 of the flash drives are Sandisk Ultra USB 16 GB sticks, one is nine of its packaging.

  1 is a 8 GB generic to Symantec given as a promo, but it is brand new.

  All these discs worked in these devices before the last major thrust of update.

  There is no splat / exclamations in the Device Manager.

  If all the USB controllers are removed and reinstalled, it does not address the issue.

  Difficulty of MS it detects no problem.

  USB 1.0 drives work!

  None of these devices are equipped with USB 3.0 ports

  Hi Laurence,.

  Please keep us updated on the status of the issue and apologize for the lack of communication.

  As you mentioned that this problem occurred after installing Windows updates, then I would suggest you to restore your computer to a restore point that was created before the date and time when you started to notice the problem.

  To do this, please follow the steps from the following link:

  Restore system files and settings

  Note: When you use the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.

  After restoring the system, try to manually install the Windows updates (try to install one by one) to identify what update caused this problem.

  To do this, please follow the steps from the following link:

  Install Windows updates in Windows 7

  Hope this information helps.

  Please reply with the results, in order to help you solve the problem.

  Thank you

• Problem with OTG USB Flash Drive - Lenovo a7000

  Hello
  I recently baught a Lenovo A7000 and it's great. I've set my default storage in the form of SD card and many applications are installed on the same, but the problem I am facing is when I connect to the USB OTG flash drive (it works fine). When I take it apart all the applications on my SD card are not visible on the home screen. However, girls are on the only sd card, but the just icons are not displayed. Whenever I connect OTG all apps are visible again after removing the OTG same problem each time.
  Please help me solve this problem. I want my apps to install to sd card, but not on the drive Flash OTG.
  What should I do? Thanks in advance

  Well, the problem is solved only when restart us the machine, but it's still
  not convenient to reboot each time that you insert an OTG. He really needs a
  Difficulty again.

• Problem disc HARD Lenovo Z500

  Hello

  I have a problem with the hard drive lenovo z500. Recently, I checked with hdtune pro there 5 or 6 bad sectors, I tried to check with chkdsk, just to be sure and then it says: no error found on the hard drive. Now, I am bit confused should I send my computer laptop to a service provider or not?

  Comment to Moderator: Please refrain from bumping your threads / post (s) more frequently than the 3 days. In doing so, unfairly, pushes discussions of other members down. Bumping message (s) deleted.

  alessionikky wrote:

  Hello

  I have a problem with the hard drive lenovo z500. Recently, I checked with hdtune pro there 5 or 6 bad sectors, I tried to check with chkdsk, just to be sure and then it says: no error found on the hard drive. Now, I am bit confused should I send my computer laptop to a service provider or not?

  Comment to Moderator: Please refrain from bumping your threads / post (s) more frequently than the 3 days. In doing so, unfairly, pushes discussions of other members down. Bumping message (s) deleted.

  Try the program of diagnosis of the manufacturer of the hard disk to be sure.

• T42 - USB + biometric controller driver problem

  Dear community,

  This is my first post desperate, after talking to Lenovo technicians yesterday for more than 2 hours.

  That's happened?

  I sent my T42 (2373-H6U, teacher of XP SP2) in and Lenovo BIOS update, replaced some plastics etc...

  Last Thursday, I tried to move some data on my external hard drive, and it seemed to take forever. So I decided to restore the factory settings and did so yesterday. However, it still seemed that I have USB speed issues (in the Device Manager, the system recognizes the USB ports, but the speed is 1.1 instead of 2.0, who she was before sending them in.) and windows did not recognize the drivers of biometric processor...

  So what I did, I

  USB:

  -ran PC doctor and he says that this usb device is not installed...

  -installed the chipset intel... http://www-307.IBM.com/PC/support/site.WSS/document.do?sitestyle=Lenovo&lndocid=MIGR-46058

  -tried to install this but works not because it does not work on my system... WIN NT 4.0: http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-4TQVCU

  What now?

  BIOMETRIC processor:

  -anything yet, because I have not found a driver...

  Bottom line:

  Lenovo said drop it again (still under warranty) but I have to LEAVE THE COUNTRY TUESDAY FOR a YEAR AND THEY DON'T want TO SHIP overseas!

  Maybe one of you can enlighten us on that.

  At soon Barthezz

  I'm sorry to say you need to send the machine. The Southbridge chip on the motherboard is a failure and the Board needs to be replaced or the chip in a re-ball. Good luck.

• My computer Toshiba Satellite keeps the 'blue screen' and that is to say that it is caused by "a problem with a USB driver. How can I fix it?

  Resolve a problem with a USB driver

  You have received this message because your universal serial (USB) bus driver caused a stop error, also known as a blue screen error. This error means that the computer has stopped abruptly to protect against potential corruption of data or loss.

  What is a driver?

  A driver is software that allows your computer to communicate with hardware or devices. Without drivers, the hardware you connect to your computer (for example, a video card or a webcam) may not work properly.

  The recommended steps that follows can help to eliminate this problem, or at least reduce its frequency. Try them in the order listed. If a step cannot solve or reduce the problem, then move on to the next.

  Steps to fix this problem

  1. Adjust your computer's power settings

     The following power settings may help reduce the frequency of this problem.

     1. Turn off the USB selective suspend setting:

        1. Click on the Start button .

        2. In the search box, type power options, and then press ENTER.

        3. Find the plan selected, and then click change plan settings.

        4. Click change advanced power settings.

        5. Double-click the USB settings , and then double-click on USB selective suspend setting.

        6. Make sure that the USB selective suspend setting is disabled. If it is enabled, click it and select disabledand then click OK.

     2. Disable power saving mode (computer portable computers only):

        1. Click on the Start button .

        2. In the search field, type power options, and then press ENTER.

        3. Under Preferred Plans, ensure that High Performance is selected, and then close the window.

  2. Look for an update of the BIOS for your computer system

     Several computer manufacturers whose computers have this problem published BIOS updates to fix this known issue. Contact your computer manufacturer to see if a BIOS update is available for your computer model.

     What is the BIOS?

     The basic input/output system (BIOS) is software built into a computer that runs when the computer is turned on. Among other things, this software starts the operating system, and supports the transfer of information between hardware devices (such as the keyboard and the monitor).

     How can I find the manufacturer of my computer?

     Click on the Start button , type msinfo32 in the start search box and press ENTER. The manufacturer of your computer is listed as the manufacturer of the system in the right pane of the system information window.

     Click here to go online to see the contact information for most of the computer manufacturers

  3. Download and install the latest updates and drivers for your computer

  It's a good idea to periodically check the updates of driver for your computer, especially if you added new hardware recently, such as a USB hub or other USB device.

  What is a USB hub?

  A USB hub is a device with multiple (USB) universal serial bus ports. USB ports are narrow and rectangular connection points to connect USB devices to your computer. A USB hub is used an Extender of port or port replicator, providing more USB ports to run from a USB connection on your computer. USB hubs can be external devices that connect to a USB port, or they can be internal devices built into your computer.

  To check for driver updates:

  1. Use Windows Update to find and install updates:

     1. Go online to Windows Update

     2. Click the check for updates in the left pane, and then click view available updates.

        What happens if I see any updates available?

        • If you see you receive updates: managed by your system administrator, you can try clicking on the link to check online for updates from Microsoft Update or Search online for updates from Windows Update, but you should maybe contact your system administrator to get the desired updates.

        • If you do not see the message above and no update is available in Windows Update after clicking on the link check the updates in the left pane, then the available updates have already been installed.

     3. Select the driver for your device updates and more updates to install.

        Note
        We recommend that you install all Important updates and recommended. These updates improve the security and stability of your computer.

     4. Click on install. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  2. If you recently added a new hardware device on your computer, go online to the manufacturer's Web site to see if there is an update to the driver.

  3. If you recently added a new program on your computer, go online to the manufacturer's Web site to see if an update is available.

  Steps to work around this problem

  Warning
  These measures are intended to solve a specific problem, but could do so by temporarily disabling or removing some features on your computer.

  1. Try to remove newly added USB devices

     If this issue occurs after adding a USB hub or other USB device, consider removing to see if the problem goes away. If this resolves the problem, contact the manufacturer of the device for the updates or other recommendations.

  2. Do not disconnect USB devices while the computer is to stop or go to sleep

  This problem is known to occur when USB devices are disconnected when the computer is trying to stop or switch mode to 'sleep'. This is common with cell phones, especially those with a docking station, as docking station can act as a USB hub. The frequency of this problem could be reduced by allowing your computer to completely close or completely in sleep mode before detached from its docking station or unplug it or the docking station USB devices.

  If you know which USB device is causing the problem

  It may be possible to prevent the Blue error screen by choosing the option remove the device safely in the Notification area, before putting your computer into sleep or Hibernate mode.

  1. In the system tray, click the icon to remove the device , select the USB device that you think that the origin of the problem and then click OK.

  2. Do not physically remove the USB device.

  3. Perform the action which resulted in the Blue error screen, so that was taken the functioning of your computer after the mode standby, hibernation, or, in the case of laptops, close the laptop computer or place it in a docking station.

     1. If the Blue error screen persists, it is likely that the problem is with another USB device. Try this procedure using other USB devices until you find that at the origin of the problem.

• If the Blue error screen disappeared, you have probably identified the device causing the problem. Contact the manufacturer of the device for more information on how to solve this problem, or use the option to remove the device safely to work around him.

Note
Depending on the manufacturer and model, some USB devices will become available automatically when you resume using your computer. Others will require that first disconnect you physically and then plug back in front, they will be recognized by the computer. Check the system tray to see if the USB device that you removed safely become available when you started to use your computer again. If she did not become available automatically, then physically unplug it and then plug it in again.

This is the screen it gives me. Help, please! If problem fixed, will BE AWARDED!

Hi ChayceSteffiare,

For instructions on solving problems with USB devices, see the following article:

Tips for solving problems of USB devices

To fix blue screen errors, see the following article:

Pick up the pieces after a computer crash

See also:

Optimize Windows Vista for better performance

Ways to improve your computer's performance

• The problem is the USB Devices folder shown as a shortcut so I can not Capy of data in the folder with other devices or hard drive.

  Original title: USB problem

  I use windows 7 as operating system. I have problem when I insert USB devices as pan tie drive, mobile, reader of cards ect. USB port of my PC. The problem is the USB Devices folder shown as a shortcut so I can not Capy of data in the folder with other devices or hard drive. so please suggest me what I can do?

  Hello

  Start Windows Explorer, and then see if there is a drive letter assigned for access to the
  drive. If this is not the case, check if the disc is shown in disk management.

  1. Open Computer Management by clicking on the button start , by clicking on Control Panel, system and security, clicking Administrative Tools and then double-click computer management. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  2. In the left pane, under storage, click Disk Management.

  If there has made a right click option - assign a drive letter for you can use Windows
  Explorer to copy files.

  I hope this helps.
  --------------------------------------------------------------------------------------------
  Rob Brown - Microsoft MVP<- profile="" -="" windows="" experience :="" bicycle="" -="" mark="" twain="" said="" it="">

• I installed the download tool usb/dvd windows 7, but after you have selected the iso file when I insert the USB stick and refrecing, it does show that "no usb drive compatible' what is the problem with my USB

  I installed the download tool usb/dvd windows 7, but after you have selected the iso file when I insert the USB stick and refrecing, it does show that "no usb drive compatible' what is the problem with my USB

  I have sandisk cruzer blade USB key

  Hi Rohit,

  Thanks for posting your query in Microsoft Community Forum. I understand that your USB drive is having problems of compatibility with your computer, but I would like to learn more about the issue in order to provide you with better assistance.

  1. You did it any significant hardware or change software on the computer before this problem?
  2. When do you get exactly the error message?
  3. Have you tried to connect to any other computer on this flash drives?
  4. Your USB key works on other computers or have you tried to connect to different USB ports on this computer?
  5. Is the pen drive getting detected in the case or you are able to access the drive folder in the window of the computer ?

  The question may arise if the currently loaded USB driver has become unstable or damaged, or if your PC requires an update for problems that could conflict with a device USB and Windows. This can also occur if your USB controllers may have become unstable or corrupt. So, I would suggest trying the following steps and check if the problem persists.

  Method 1:

  Please try the fixit (s) provided below which will help you solve common problems associated with devices and USB ports.

  • Hardware devices do not work or are not detected in Windows
  • Diagnose and automatically fix the Windows USB problems

  If method 1 does not work, try Method 2.

  Method 2:

  Remove and reinstall all USB controllers.

  1. Open Manager devices by clicking the Start button, click Control Panel, click system and security, and then, under System, clicking Device Manager. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  2. In the list of the categories of equipment, locate and expand Bus USB controllers.
  3. Right-click every device under the Bus USB controllers node and then click Uninstall to remove them one at a time.
  4. Restart the computer and let the USB controllers get reinstalled.

  Plug in the removable USB device and test to make sure that the problem is solved.

  If the problem persists, go to method 3.

  Method 3:

  This method will install the latest drivers from device to your USB device.

  1. Click the Start button, type Windows Update in the search box, and then click Windows Update in the results pane.
  2. Click find updates. When the scan finished, click optional review updates.
  3. Click the check box next to the update, and then click install updates.
  4. If you are prompted, read the license agreement, then click I agree.
  5. Follow the instructions on the screen to download and install updates.
  6. If you are prompted, restart your computer.

  More information: Update a hardware driver that is not working properly

  Hope this information is useful. If the problem still persists, please post back for further assistance, we will be happy to help you.

• Problem of the Satellite A100-912 usb external HARD drive

  Please help guys!

  I installed Win 7 32 bit on my laptop Satellite A100-912. Everything works perfectly in addition to having problem reading external usb HDD (disk appears in disk management, but are not accessible). These discs are not defective, because I use them on some other Pcs. Thumb drives are not a problem at all. Tried to use the self-powered USB hub but without success. Not sure if this is a related issue of Bios or a material limitation of this device. Thank you!

  > Everything works perfectly as well as having problem reading external usb HDD (disk appears in disk management, but are not accessible).

  The HARD disk appears in disk management, but you see the additional HDD in my computer?

  I don't know Mr. what could cause this and he s strange that you cannot access the USB HDD, even if it has been recognized correctly
  Maybe you should try updating the chipset driver.
  Chipset driver controls the ports of interface USB/so it of certainly worth a try