Problem loading data from WET cd files

I'll try to make a long story short!  Had to reset my laptop to factory settings.  I used Windows Easy Transfer to save the data on a cd.  I have never had to do that before and was not aware that you had the possibility to exclude certain files, such as system.  WET questioned for a fourth disc to continue, I realized that I must be the copyall. Only wanted personal files, so I cancelled the initial transfer on the third disc.  When I try to reload, using WET, naturally she wants the fourth disc, which I did not!  Is there another way for me to recover data?  There are more than 2 years ' worth of pictures, I'd really rather not lose, locked in these CDs!

Thanks for any help!

Check the C:\Users and see if there are user names that you did not add on the new computer - data may be there.

If you know the name of a file of data transferred, we can do a thorough search for her and if we believe that he we will probably find others. To search for the folder C: whole disk in Vista go to start / search and type in ' or '. As you type, you'll see two hyperlinks appear just above where you type and we'll search everywhere.  A click on it.  Who will do a fast indexed search and bring up a dialog box.  Click on advanced search.  Click the drop-down location and find the C: drive and click on it. Check the box "include not indexed, hidden and system files (might be slow).»  Then click on search.  You will now search your entire hard drive to the specified file.  And Yes, this isn't a very effective way to search the entire disk for a file but it is how it is done in Vista.

I hope this helps.

Good luck!

Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

Tags: Windows

Similar Questions

  • How to ignore the details of footer when loading data from a .txt file

    Hello experts,

    I import data from a txt file in my database. I jumped my header using SKIP information, but how can I ignore my footer details.
    Thank you

    Answer on your other thread:

    Txt for a required format file processing

  • Loading data from table to file odi.

    I need to load the data from the table to file without using the interface in odi.  How to do it.

    Hello

    using tool OdiSqlUnload, it loads the table directly.

    I tried the db oracle table to the file without using interfaces. I used with procedures.

    to achieve this, must create the procedure in odi. Select the control on the target technology: oditool.

    «OdiSqlUnload "-FILE = data procedure.txt D:\TEXT\Test" "-DRIVER = oracle.jdbc.OracleDriver" «-URL=jdbc:oracle:thin:@192.0.0.0:1521:odiuser ' '-USER = odiuser ""-PASS = hpfHiT7Ql0Hd79KUseSWYAVIA ""-FILE_FORMAT = VARIABLE ""-FIELD_SEP =, ""-ROW_SEP = \r\n ""-DATE_FORMAT = YYYY/MM/DD hh: mm: ""-CHARSET_ENCODING = ISO8859_1 "" "-XML_CHARSET_ENCODING = ISO-8859-1"»

    Select * from odiuser. DWT_SECTOR.

    I think this will help for you.

    Thnaks in advance,

    A.Kavya.

  • Loading data from a text file

    I have a text in a file archive data that contains various information (numeric and string) I need to load into various controls in a VI that was to open the file and look for some characters of beginning and end of loading?  The information was listed by the VI of control so can I just load a previous series of data using its path and file name of data control?

    I guess that the following numbers the "data OH are listed below:" is supposed to go in a 2D array?

    There are several ways to do so. A simple way is to simply read the file and cut each of the sections of interest and convert the string in a table 2D, like this:

    Another is to read the file using read the spreadsheet file, and then the index on the first column and use it to search for the clues where areas of interest. You can then use subset of the table to get the 2D data table.

  • problem loading data from oracle table excel table / oracle

    Hi all

    I'm working on the form of data transformation 2 different sources to a target table only oracle.
    My first source - excel sheet.
    2nd source - oracle table.

    Creation of data servers, dsn(for excel), reversing everything done very well.
    When I try to display the data there is a problem.

    EXCEL - serial number column is displayed as 1.0,2.0,.3.0 etc. need 1,2,3,4,5...
    Oracle tables-> after that reverse it does not display the data types for the selected columns.

    I am not able to create a join and run.
    Help, please.

    Thank you
    Chaitanya.

    Hello

    Just a thought, why not u cast TO_NUMBER to the interface mapping for the serial number column?

    Thank you
    Guru

  • Problem loading data using utilities

    Hi all

    I am trying to load data from spreadsheet (550 files) using utilities of the Apex.

    I have a DATE field in the worksheet. And about 100 records could not be loaded.

    I get the below error.

    ORA-01843: not one month valid

    The date in the field format is DD/MM/YYYY. I think that the source must have a different data type. And its cause me this error.

    How can I fix it? Also, I used the built in 'format' function and set it to DD-MON-YYYY(since it's the requirement) before loading the data.


    Versions:

    3.1 and 9i db.


    Thanks in advance.

    See this possible solution. It allows pasting of the excel data in an APEX application... : http://dbswh.webhop.net/dbswh/f?p=BLOG:READ:0:ARTICLE:126300346812330

    Thank you

    Tony Miller
    Webster, TX

    While it is true that technology is waiting for no man; stupidity always stops to accommodate new passengers.

    If you answer this question, please mark the thread as closed and give points where won...

  • Problem with loading Variables from a text file

    Hello

    I'm quite a novice when it comes to scripts and I am struggling to achieve something quite simple. I want to have an external text file that will allow me to control the number of timeout that I reference in my code below. I need to be able to change this variable by editing a simple text file.

    var myTimer:Timer = new Timer(60000,1);
    

    I want to change the 60000 and 1.

    I followed what looks like a nice clean approach to this tutorial: http://www.designscripting.com/2012/01/as3-flash-loading-variables-from-a-text-file/

    However, when I'm stuck is how to reference my variable imported into the code. I tried 'name1' but it does not work. I get ' 1067: Implicit coercion of a value of a numeric type to a type unrelated string.' error '

    I'm an output:

    HTTP status = 0

    Data loaded

    Name1: undefined

    {name2: 1}

    http://screencast.com/t/gwD09jovIrb4

    I use CS5 and AS3.

    Thank you

    Dan

    I see nothing wrong with what you show, and when I try I get the following output...

    HTTP status = 0

    Data loaded

    Name1: 6000

    name2: 1

    The only thing I suspect for the moment is the data file itself.  I can reproduce the problem if I insert white space before this string, then make sure that the text string is not preceded by anything whatsoever.

  • Cannot find the file error when loading data from text file to Oracle

    Hello

    I have an interface where I am loading a data from the text file to Oracle.
    But when I try to do that I am getting following error.

    ODI-1227: SrcSet0 (load) task fails on the source FILES SAPMM connections.
    Caused by: java.sql.SQLException: file not found: d:/mdb/#General.get_filename
    to com.sunopsis.jdbc.driver.file.FileResultSet. < init > (FileResultSet.java:160)
    at com.sunopsis.jdbc.driver.file.impl.commands.CommandSelect.execute(CommandSelect.java:57)
    at com.sunopsis.jdbc.driver.file.CommandExecutor.executeCommand(CommandExecutor.java:33)

    SAPMM is the name of the connection.
    I use get_filename to get the name of the file and it is fetching a correct value as long as this variable is updated in the previous stage of this interface.
    KM, used for loading is SQL file

    What would be the cause of this error?

    Thank you
    Mahesh

    Also a single query would be ok if I'm moving only generated package (according to your scenario3) scenario and not UI? It running properly?

    Yes... It runs successfully

  • How to load data from ms sql to the by the file rules and maxl essbase

    Hi, everybody!
    Pretty Shure the kind of topic exists already on the forum, but unfortunately can't find it.

    I want to understand, how to load data from the database to ms sql for the PB of essbase application.

    (I) so I have:
    1. a request for 'society '.
    2 and its database 'Plan '.
    3. with simple outline, which contains only two dimensions:

    -The time period < 1 > (Label only)
    -Total year (~)
    -Qtr1 (+)
    Jan (+)
    Feb (+)
    Mar (+)
    -Qtr2 (+)
    APR (+)
    May (+)
    Jun (+)

    -Accounts < 1 > (Label only)
    -Lost / based (~) (Label only)
    -Revenues (+)
    L1.1 (+)
    L1.2 (+)
    -Costs (-)
    L2.1 (+)
    L2.2 (+)

    (II) also, I created a rules file called "CO_DWH" and associated with this schema
    It (Rules file) a 3 columns:
    Data of the 'period', 'account '.

    There is also the option checked "load data".

    (III) in MS SQL Server, I have a database of "hypdb" and "essadmin" with "password" login

    (IV) I executed my bat file:
    C:\Hyperion\EssLoad.bat
    There is only one line:

    EssLoad.bat-
    startMaxl.cmd EssLoad.txt
    ----------------------------------------------

    EssLoad.txt-
    login password admin on erpserver;
    Import database data Company.Plan connect in essadmin password using the server rules_file 'CO_DWH' error abort;
    disconnection;
    "exit";
    --------------------------------------------


    All plans that I copied well worked ERP system, but I don't understand, this is exactly table in the MS SQL database, data loading to essbase db?

    TOU have to do a few things
    1. on the server of Essbase, put in place a system odbc for your MySQL database connection
    2. in the State of charge, go to the file menu and select open source SQL database and in the source of data in your SQL statement. A few tips. Where it says select, don't put in the select Word and when he says to not put in of. The system adds for you. TI enter a simple SQL statement is to do this in the box so select if your SQL would be normanlly as select * from myTable just enter the code as * from myTable in the upscale neighborhood

    The ol/recover the click and fill your connection information. Should bring back the data in the State of charge. Save the State of charge and use

  • Load the data from a text file into a table using pl/sql

    Hi Experts,

    I want to load the data from a text file (sample1.txt) to a table using pl/sql

    I used the pl/sql code below

    ***********************************
    declare
    f utl_file.file_type;
    s varchar2 (200);
    c number: = 0;
    Start
    f: = utl_file.fopen('TRY','sample1.txt','R');
    loop
    UTL_FILE.get_line (f, s);
    insert into sampletable (a, b, c) values (s, s, s);
    c: = c + 1;
    end loop;
    exception
    When NO_DATA_FOUND then
    UTL_FILE.fclose (f);
    dbms_output.put_line('No. deles de lignes insérées: ' || c);
    end;

    ***************************************

    and my sample1.txt file looks like

    ***************************************
    1
    2
    3
    ***************************************

    Gets the data inserted, with way below

    Select * from sampletable;

    A, B AND C

    1-1-1
    2-2-2
    3 3 3

    I want that data to get inserted as

    A, B AND C

    1 2 3

    The text file I have is to have three lines, and the first value of each line should go to each column

    Help, please...

    Thank you
    declare
    f utl_file.file_type;
    s1 varchar2(200);
    s2 varchar2(200);
    s3 varchar2(200);
    c number := 0;
    begin
    f := utl_file.fopen('TRY','sample1.txt','R');
    utl_file.get_line(f,s1);
    utl_file.get_line(f,s2);
    utl_file.get_line(f,s3);
    insert into sampletable (a,b,c) values (s1,s2,s3);
    c := c + 1;
    utl_file.fclose(f);
    exception
    when NO_DATA_FOUND then
    if utl_file.is_open(f) then utl_file.fclose(f); ens if;
    dbms_output.put_line('No. of rows inserted : ' || c);
    end;
    

    SY.

  • Loading (without rules file) crashes on EAS on the loading data in the exported file.

    I'm doing a load of data in a database if a file I exported previously and data loading crashes just after taking in the text file. It hangs where it says "press ESC or cancel button to complete the current operation. It is a very small text file that am loading data from. I have to kill the ESSSVR process for this particular application back the EAS to perform other tasks. Am able to do any other tasks very well. Also on our Prod environment we do not have this problem and can't seem to load the data through very well exported text files. Has anyone seen this behavior before?

    Thank you
    Ted.

    Published by: Teddd on March 4, 2013 08:52

    This announcement so it would be beneficial to others on 11.1.1.4 with essbase on RHEL 5 server. The answer to the question is in this Doc ID 1531236.1 knowledge of Oracle database. Apparently, it shows only on RHEL 5 and glibc is updated glibc - 2.5 - 107 of glibc - 2.5 - 81. The solution is to donwgrade the glibc 2.8 - 81. Please refer to this doc 1531236.1 if any of you have a similar problem.

    Published by: Teddd on March 14, 2013 11:38

  • SOS! -Error to load data from Oracle 11 g to Essbase using ODI

    Hi all.

    I want to load data from oracle database to essbase using ODI.
    I have set up correctly the Hyperion essbase physical and logical topology manager and got the structure ESSBASE BASIC app DEMO.
    The problem is.
    1. when I try see data right click on the table of essbase.
    va.sql.SQLException: driver must be specified
    at com.sunopsis.sql.SnpsConnection.a (SnpsConnection.java)
    at com.sunopsis.sql.SnpsConnection.testConnection (SnpsConnection.java)
    at com.sunopsis.sql.SnpsConnection.testConnection (SnpsConnection.java)
    at com.sunopsis.graphical.frame.b.jc.bE (jc.java)
    at com.sunopsis.graphical.frame.bo.bA (bo.java)
    at com.sunopsis.graphical.frame.b.ja.dl (ja.java)
    to com.sunopsis.graphical.frame.b.ja. < init > (ja.java)
    to com.sunopsis.graphical.frame.b.jc. < init > (jc.java)
    I got the answer of partisan Oracle it's ok, just omit it. The second problem will appear.
    2 create an interface between the oracle and essbase database, click on the option ' staging of deffirent from the area of the "(ce qui signifie que la mise en scène est créé à la base de données oracle) target, and using IKM SQL for Hyperion Essbase (metadata), run this interface".

    org.apache.bsf.BSFException: exception of Jython:
    Traceback (innermost last):
    "< String >" file, line 61, in there?
    com.hyperion.odi.essbase.ODIEssbaseException: invalid value specified [RULES_FILE] for the load option [null]

    at com.hyperion.odi.essbase.ODIEssbaseMetaWriter.validateLoadOptions (unknown Source)

    at com.hyperion.odi.essbase.AbstractEssbaseWriter.beginLoad (unknown Source)

    at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)

    at sun.reflect.NativeMethodAccessorImpl.invoke (unknown Source)

    at sun.reflect.DelegatingMethodAccessorImpl.invoke (unknown Source)

    at java.lang.reflect.Method.invoke (unknown Source)

    at org.python.core.PyReflectedFunction.__call__ (PyReflectedFunction.java)

    at org.python.core.PyMethod.__call__ (PyMethod.java)

    at org.python.core.PyObject.__call__ (PyObject.java)

    at org.python.core.PyInstance.invoke (PyInstance.java)

    to org.python.pycode._pyx1.f$ 0 (< string >: 61)

    to org.python.pycode._pyx1.call_function (< string >)

    at org.python.core.PyTableCode.call (PyTableCode.java)

    at org.python.core.PyCode.call (PyCode.java)

    at org.python.core.Py.runCode (Py.java)

    at org.python.core.Py.exec (Py.java)



    I am very confused by it. Someone give me a solution or other docs.

    Ethan.

    Hello

    You say that you are loading, but you chose the KM for the loading of metadata?
    If you load metadata then you must provide a rules file, if you are loading and then choose the KM - IKM SQL for Hyperion Essbase (DATA)

    Ok?

    See you soon

    John
    http://John-Goodwin.blogspot.com/

  • Loading data from Microsoft Dynamics AX via FDM

    Hello world

    I was wondering if anyone was using FDM to load data from Microsoft Dynamics AX into HFM via FDM, and how this was done. We are currently on version 11.1.2.2.0, thanks for any idea.

    The easiest way would be to get the MS Dynamics team to provide a flat file extracts the required data and then use FDM to import in HFM. There is not out of the box adapters to interface directly with MS Dynamics, but another option would be to build an integration script to interface directly with the data in the relevant MS Dynamics via FDM tables but it would be more involved and require a knowledge of the underlying database MS Dynamics, FDM scripting, dry and would be much more difficult to maintain for the average user.

  • Loading data from SQL to Essbase table

    Hello

    I'm loading data from SQL to Essbase table by using a rules file. Number of rows in the source table is 7 million. I use the SUNOPSIS MEMORY ENGINE as area transit, LKM SQL for SQL and SQL IKM for Hyperion Essbase (DATA).

    Question:

    1 can I not use any other LKM as MSSQL for MSSQL (PCBS) to load data to the staging instead of LKM SQL for SQL? What I have to change the transit area then? Loading data using LKM SQL for SQL seems quite slow.

    2 it is mandatory to use LKM SQL for SQL, can someone please tell me what I can change to make this quick support parameters?

    3. is it compulsory to use the SUNOPSIS MEMORY engine loading data from SQL server to Essbase?

    Thank you...

    (1) Yes, I highly recommend watching using a KM which uses native as database technology these will usually be more efficient than the generic (like LKM SQL for SQL) KM especially when large volumes of data are involved. Your staging will change depends on where you organize data for example if you are using a SQL server specific KM as - MSSQL for MSSQL (PCBS) - you must have a lay-by available on a MSSQL database and have access to the utility of PCBS.

    (2) it is not mandatory to use this KM you can use a KMs supported by your database technology

    (3) it is absolutely not obligatory to use the SUNOPSIS MEMORY engine. This should only be used when you have relatively small amounts of data, as well as all the processes in memory, or in the case where you have no other relational technology to perform the staging on. However, in your case to use wherever you are processesing these large volumes of data you should be staged on a physical such as SQL Server or Oracle database if they are available.

  • Loading data from the planning application sample

    Hello

    I created an example of planning application in the workspace (V 11.1.1.3). By default, they dimension 'Year' the year of departure as FY11. Whereas, loading data from file 'SampleApp_data.txt' that comes with the installation is the year of departure as FY09. Then, when I insert data in environmental assessment (form free loading), there is an error that the FY09 member is not present. Does anyone know how can I approach properly load the sample data? I tried to replace by FY11 by FY12 FY10 FY09 and so forth in Notepad, but the process still hang on the first attempt.

    Thanks in advance,
    Aerts

    The easiest way is not sample application tick the options and change the calendar 2008 or 2009, go to the finsh tab, then return to the first screen and sample application tick, then finished, it will create with the year of departure.

    See you soon

    John
    http://John-Goodwin.blogspot.com/

Maybe you are looking for

  • Sub Windows Performance guard needing to be refreshed...

    Can someone help me out here? The Windows Performance Index keeps to be updated, even if I have already done this many times.

  • BLUE STRIPES ON PAPER

    I have a HP color laserjet 1600. It works very well (especially) except it prints two vertical lines every time I have to print something. I cleaned the transfer kit, but he returns. It appears bluish in color. It would be a problem with the toner ca

  • Settings of the AFN for a direct TCP (3G v.s. GPRS) connection

    Today, I read a lot of articles about the transportation options for the Blackberry network. I installed the Tool of Network Diagnostics on my device (BlackBerry 9300 v5.0). I'm Tournai on "Mobile network" and disabled the "WiFi". Therefore, my devic

  • Site to Site VPN configuration does not

    Hello I just tried to set up a test site to site VPN. Diagram of arrangement is attached. Router R2 is supposed to act as the 'Internet' to allow connectivity between the two networks. My VPN on ASA1 and ASA2 configs are below: ASA1 Note to outside_c

  • Help! Install Wins 2003 R2 on PowerEdge SC420

    Hi all PowerEdge SC420 RAID 5 using the 9000 series 3Ware RAID control. 4 GB OF RAM. I've been installing Wins 2003 R2 on RAID, all right until I got a message Windows logo testing to verify its compatibility with this version of windows has failed..