Problem loading my BootCamp Partition after the partitioning of the disk again

Similar Questions

• Running from a Bootcamp Partition vs virtual disk

  Is there an advantage to run Windows 7 from a vs Bootcamp partition a virtual disk image?

  I started to use a virtual disk image and just created a Bootcamp partition and added to the merger.  Things seem to be quite a bit faster using the Bootcamp partition.

  Is this the case in general?  Just curious to know what others have experienced.

  Thank you!!

  It is normal that you feel.  Realize that a VM is running "virtual hardware", which is generally not as fast that runs the operating system directly on the physical hardware.  Think of it as speaking through a translator.  There is a 'delay' for the message to be delivered. Take a look at the frequently asked Questions on VMware Fusion, about halfway down, the section on virtual hardware.

  For Boot Camp however virtual, take a glance to choose the settings of VM right.  Among the main reasons to use one or the other would be the advantage of the speed of Boot Camp against the convinience of not having to restart the Mac or the ability to run several machines against virtual simultaneously only running an instance of Boot Camp.  (e.g.: simulate an entire network, with the file server, web server, mail server, etc., with just one physical machine.)

• Having problems with Adobe Suite C. after the upgrade to El Capitan on an iMac?

  Someone at - it problems with Adobe Suite C. after the upgrade to El Capitan on aiMac? What did you do about this? What helped?

  In case you downloaded the Apple Stroe Yosemite, it always can be downloaded in the section of your account purchases.

• Firefox will open 4 or 5 thin legs, but then do not load any other sites after the first 4 or 5 or you can update one of these first tabs - including: config and the addon page

  Firefox 5 worked well. I installed Firefox 7, and when I ran, tabs just say «connecting to...» "and hang up. Rebooting did not help. Sites Web open correctly in IE and Chrome. Disabled all firewalls and antivirus, nothing helped. Uninstalled and reinstalled Firefox 5, everything has worked again. It was using Vista 64-bit.

  Upgrading to Windows 7, uninstalled Firefox 5, installed Firefox 7, had the same problem. Uninstalled Firefox 7 completely (including profile information, I saved this information in another file), restarted the computer and installed Firefox 7 using a clean profile. Do not install add-ons, checked to make sure that all plug-ins were updated and updated plugins up-to-date.

  Now when I run Firefox, I can load 3 or 4 or 5 tabs very well - after these first tabs bit are open, I can not open or refresh all other tabs - with about: config and the add-on Manager - I have to restart Firefox. The hangup does not appear to be associated with what websites I try to open, but it seems that the number is the problem. I ran through all the procedures of the FAQ, including changing the maximum number of connections to 48, and the problem does not seem to go away.

  As a side note, I had this same problem when I tried to go from version 5 to version 6 more. Version 5 is the latest version which worked on my system.

  The default value of the pref Network.http.Max - connections has been increased from 30 up to 256 in versions of Firefox 6 +.

  Try to decrease the value of the pref Network.http.Max - connections from 255 to a setting like 30 such as used in versions of Firefox 3.

  • https://support.Mozilla.com/kb/Firefox+never+finishes+loading+certain+websites

  See also:

  • http://blog.bonardo.NET/2011/09/30/is-your-firefor-freezing-at-regular-intervals
  • Maintenance: https://addons.mozilla.org/firefox/addon/places-maintenance/

• Question of Bootcamp, even after the restoration process...

  Hello

  I still have this problem Bootcamp launch even after trying restore OS X via Internet and Time Machine

  Please can someone help me rebuild my disk of any merger manually?

  

  Here is my list under terminal diskutil:

  / dev/disk0 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * TB 2.0 disk0

  1: disk0s1 EFI EFI 209.7 MB

  2: Apple_CoreStorage Macintosh HD 1.4 TB disk0s2

  3: disk0s3 Apple_Boot Recovery 650.0 MB HD

  4: EFI 104.9 MB disk0s4

  5: disk0s5 Apple_HFS UNTITLED 16.8 MB

  6: EFI No. 104.9 MB disk0s6 NAME

  7: Apple_HFS BOOTCAMP 543,5 GB disk0s7

  / dev/disk1 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * GB 121,3 disk1

  1: EFI EFI 209.7 MB disk1s1

  2: disk1s2 Apple_CoreStorage Macintosh HD 121.0 GB

  3: disk1s3 Apple_Boot Boot OS X 134,2 MB

  / dev/disk2 (internal, virtual):

  #: NAME SIZE TYPE IDENTIFIER

  0: Apple_HFS Macintosh HD + 1.6 TB disk2

  Logical volume on disk1s2, disk0s2

  BFB9BB15-3247-48C4-A376-F329FBC563C3

  Fusion unencrypted drive

  Thanks a lot for your help

  Do you have a backup of Mac OS x Time machine?

  Please after the release of cs diskutil list.

• Problem loading in outlook express after changing Internet service providers.

  I have recently switch from Verizon to Comcast internet providers.  Since I had problems loading in outlook express.  One in a blue moon, it will actually connect, but more often than not, it does nothing.  It loads in the taskbar upwards and the titles of the mailbox, but if it connects, you can't do anything.  Help I am getting very frustrated.

  I don't know why the change of operator would make a difference. When it finally connects, you get mail?

  Make sure that your settings are correct and that your Verizon account has been deleted.

  How can I set up/configure Outlook Express, Windows Mail & Windows Live Mail to E-mail from Comcast?
  http://www.Comcast.com/customers/FAQ/FaqDetails.ashx?ID=2288

  Then work on these steps.

  1: create a new Folders.dbx file.

  Tools | Options | Maintenance | Store folder will reveal the location of your Outlook Express files. Note the location and navigate on it in Explorer Windows or, copy and paste in start | Run.

  In Windows XP, Win2K & Win2K3 the OE user files (DBX and WAB) are by default marked as hidden. To view these files in Windows Explorer, you must enable Show hidden files and folders under start | Control Panel | Folder Options icon | Opinion, or in Windows Explorer. Tools | Folder options | View.

  A new Folders.dbx file will be created when you open OE. Note these possible side effects:

  When you re - start OE, it will build a new index of all *.dbx files it can read and create a new Folders.dbx. Please understand that you will lose the mail directory structure, all the discussion lists and all synchronization options and message rules will probably have to be edited.

  2: do not archive mail in the receipt or sent items box.  Create your own user-defined folders and move messages you want to put in them. Empty the deleted items folder daily. Although the dbx files have a theoretical capacity of 2 GB, I recommend all a 300 MB max for less risk of corruption.

  Information on the maximum size of the .dbx files that are used by Outlook Express:
  http://support.Microsoft.com/?kbid=903095

  3: after you're done, followed by compacting your folders manually while working * off * and do it often.

  Click Outlook Express at the top of the the folder tree so no folders are open. Then: File | Work offline (or double-click on work online in the status bar). File | Folder | Compact all folders. Don't touch anything until the compacting is completed.

  3: disable e-mail scanning in your anti-virus program.  It is a redundant layer of protection that devours the processors and causes a multitude of problems such as time-outs and account setting changes. Your up-to-date A / V program will continue to protect you sufficiently. For more information, see:
  http://www.oehelp.com/OETips.aspx#3

  For some programs, turning it off is not enough. You may need to uninstall and reinstall in custom Mode and remove the analysis when e-mail messages.

  If all else fails, try a new identity.

  You may have a damaged identity especially if it's the default main identity. File | Identity | Add the new identity. Create a new one and try it. If all goes well, you can import your messages and address book from the old identity and delete it.

  Note: Do not use the main word in the name of the new identity.

  How to create and use identities in Outlook Express
  http://support.Microsoft.com/?kbid=209169

  An Outlook Express basic repair kit
  http://www.Microsoft.com/Windows/IE/community/columns/oerepair.mspx#ehh

  Bruce Hagen
  MS - MVP October 1, 2004 ~ September 30, 2010
  Imperial Beach, CA

• Creative office of cloud does not load. Turn right after the launch.

  I just signed up for the subscription of the photograph and downloaded and installed the creative cloud Office. After the launch of the application, the window just sits and tries to load with the rotation of the blue circle. I can not identify or anything. I tried searching but have not seen the same problem before. Thanks for the help!

  Hi chrissy Romano.

  See - App does not open and crashes on the launch of progress wheel

  ^ Ani

• Problem with XNET start VI after the creation of sessions

  I have a timed loop sending CAN messages via XNET screws. It works great, but I always lose the very first message. It matters little, I send the first message immediately after you create the XNET session or after a few milliseconds.

  The attached screenshot shows the initialization of my four sessions XNET. Although I am starting before the session with an XNET start VI, there is without success to get the first message.

  It seems that the sessions/CAN (selectable cards and HS CAN) interfaces are initialized only after the first call to write XNET. XNET write seems to imply XNET start (see documentation), but the appellant XNET start manually after the creation of sessions does not help.

  What I'm missing to get the interfaces online and ready before you send anything?

  I was able to solve this problem because they did not actually XNET screw sorry for this post.

• Problems to open PDF files after the upgrade of the file server for 2012 R2

  Hello

  This weekend we have improved our main Windows 2003 to 2012 R2 file server.

  Since the upgrade, users (including myself) cannot open a PDF of the file server.  If I double click on a PDF file, it opens as usual, but if I double click a different PDF, the acrobat reader flashes (in the Task Manager I can see another instance AcroRd32.exe starts and stops) but the second document does not open.

  If I close the first document and then try and open the other, and then it opens without any problem.

  This only affected the opening of files on the new file server, opening several files on a local disk is very good.

  If I disable 'enable protected mode at startup' then I can open several documents of the file server.  I would prefer not to have to do.

  Users are using Acrobat Reader 11.0.10 on 64-bit Windows 7 and Windows 2008 R2 Remote Desktop.

  Does anyone have any ideas, it may be the cause?  And does anyone have one solution other than to disable the protected mode?

  Thank you

  Joe

  Hello

  Try the latest Adobe Acrobat Reader DC and check if the problem still exists or goes.

  It can be downloaded from Adobe Acrobat Reader DC install for all versions

  Thank you

  Shakti K

• Problems using Adobe Photoshop CC after the trial

  Can someone help me please on the use of Adobe Photoshop CC after the trial. I bought the composition, but I always get posted, my trial has expired.

  I already reinstalled Adobe Creative Cloud and also reinstalled Photoshop. My subscription is also listed in my profile. My system is a MAC Pro with Yosemite...

  log out and then back to your desktop app cc using the adobe id to subscribe to creative cloud, sign, sign | Creative Office Cloud app

• Vuze will close immediately at the opening after the download again.

  I got Vuze and it worked fine on my Vista laptop, until completely, he crashed and burned yesterday.  So I tried to install on my desktop, in the meantime.  Now, after the installation/uninstallation, repeat, repeat, Vuze closes immediately after I open it to run.  I tried to uninstall and reinstall a Zillion times and keep getting the same thing.  No code error, nada.  I'm so frustrated I could go postal, but love Vuze'm so willing to keep trying, with your help, hopefully.  Thank you in advance and Yes, I'm a newb.  Sorry, kids.  I appreciate greatly any help.

  Have you tried right clicking on the shortcut to the program or the .exe and select "Run As Administrator"?  Perform, even if your user name is an administrator.  If there is no difference, see if the following help.

  Have you tried to clean your Temp folder, you can do this by typing folder in the Start Menu RUN box.  This will open your Temp folder, there, you can remove all Windows will allow you to do.

  It may be necessary to show both hidden and system files and also uncheck 'Hide known file types' in Control Panel / folder Options / view to navigate to the mentioned location of Temp.

  Once more uninstall Vuze.

  To return your machine to a sense of normalcy after than multiple installs and uninstalls (who can have left pieces in all directions), try to use system restore to revert to before you first installed the program.

  How to repair the operating system and how to restore the configuration of the operating system to an earlier point in time in Windows Vista (or 7)
  http://support.Microsoft.com/kb/936212/#appliesTo

  Also try running ChkDsk to check your drive for errors. Right click on your drive icon / properties / tools / error checking.  Try first by checking do not each box (that it will run in read-only mode) to see if it reports any problems file or hard drive.  If so, restart it by checking both boxes and restart to allow him to attempt to fix any problems found.

  After running the cleaning go for a new facility using this approach.  Temporarily turn off all running programs of type security such as real-time virus scanners during installation.

  Right-click on the Setup.exe, and select the option "Run As Administrator"?  Perform, even if your user name is an administrator.

  I'm not familiar with Vuze, that's the kind of program that must be allowed by the firewall that you have?

  Panel\All Control Panel Items\Windows Firewall\Allowed programs

• Problem with update of Protection of the disk on Tecra A8 - 10F

  I have a problem that the Toshiba HDD Protection Utility does not work and I do not know why.
  {I tried this driver and I've not found for Tecra A8 PTA83E 10F but I found for Tecra M9 (PTM91) Windows Vista HDD Protection 2.0.1.7 Utility) updated the site {(ptm91)-hdd-protection-utility-2.0.1.7-windows-vista-free-download.html http://www.opendrivers.com/driver/239805/toshiba-tecra-m9}
  I installed it in my laptop but the problem is that this utility does not protect to shock the laptop, I put all settings by default, and do not protect not always.
  Perhaps because the driver for Toshiba Tecra M9?
  So please can someone give me this Toshiba HDD Protection Utility software?

  You can send me to my email: [email protected] or give me the site address :)

  Note: I've searched this site on this driver it and I can't find :(

  Hello

  In my opinion the disk utility HARD does not work on your Tecra A8 because the software was not designed for the A8 but for M9.

  The European driver Toshiba page does not provide the HDD Protection Utility for Vista.
  But I found one for the Tecra A9.
  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp?service=EU

  Look for the utility of the disk protection HARD Tecra A9 on the A8. Maybe it will work

• Reinstall Photoshop CC after the disk failure

  My iMac tells me that the hard drive has failed. I have a subscription to Photoshop CC, and I have the disc for Lightroom, as I bought it before I subscribed.

  Once my new hard drive is installed, can I reinstall LR from the disk, but how to get CC in Photoshop?

  Hi cyberantiger,

  You can download Photoshop CC from here: https://creative.adobe.com/products/photoshop

  Kind regards

  Rave

• Bootcamp lost after the new partition (try to increase disk space for the window)

  I have Version OS X El Capitan 10.11.2. Here are the details on my system.

  

  So I tried to increase the space in the partition for the training camp by using disk utility. I created the new partition. But now I can't bootcamp while I restart the computer and hold down the option key. I tried this in the terminal:

  sudo fdisk e/dev/disk0

  p

  setpid 4

  07

  Pavilion 4

  p

  writing or w (tried both)

  There

  But it does not seem to pick up my bootcamp windows. I also tried to restore the mac as early date of backup via external hard drive, but that doesn't seem to help either.

  Here is the screenshot of the output. Any help would be appreciated. Thank you.

  

  Can you post the output of the following Terminal commands?

  diskutil list

  Cs diskutil list

  sudo TPG - vv - r see the/dev/disk0

  sudo fdisk/dev/disk0

  The "sudo" commands will prompt to enter your password, and there do not appear to come back. You can also see caution against improper use 'sudo' and the potential loss of data due to an "abuse" of the order.

• partition of bootcamp missing after the installation of El Capitan

  I disabled the integrity of the system by typing 'csrutil turn off' in the terminal, however I have not yet downloaded or rebuilt GPT Fdisk.      I can install GPT Fdisk now or do I have to re - turn on the integrity of the system?

  Thank you

  You can install the GPT Fdisk. Never 'building you' because it is an executable file. SIP can be reactivated later. Is there a specific problem you're trying to solve using Gdisk?