Problem loading Z2 and sound problem

Hello

I was facing this problem recently where I'm wrong took the magnetic cable sony and plugged incorrectly on my Z2 xperiz.

This was after the 5.1.1 update.

All of a sudden, my phone did not start using my power of sony Bank and a charging cable quick, that I got afterwards upward and running.

But the battery drains now how anyone, regardless of the use less.

A battery that is used for the last days 1.5 with me now barely lasts 9hours without doing anything.

The battery keeps fluctuating when it reaches 90%.

A change in two outlet stores, z2 specific cables have not helped

Three repairs, a new image, two complete resets didn't help at all

Second question

The sound is all of a sudden considerably low,

I have the sony mdr-nc31e, which seems to be much lower than what it was in.

Once again the repairs did not work, the Equalization does not seem to work any longer.

and the sound does not seem to come from a speaker from a two, this is the model D6502.

What is your opinion on that?

Although the Sony forums have failed.

I ran a check with the voltmeter.

What has been found, it's my battery did not receive enough power and this kept fluctuating.

Given a sony Center who said that I need to replace a battery.

Tags: Sony Phones

Similar Questions

  • Problems loading Google and YouTube in Safari

    Someone at - it problems loading Google and YouTube in Safari?

    Loading progress bar stalls or, in the case of YouTube, photos and comments sometimes arise. This was an intermittent problem (worse when the awakening of the mode standby). At other times, sites load normally.

    I don't have equipment, internet connection or extension problems. I have also cleared cache, history, cookies, etc.

    This problem seems to be limited to Google sites (YouTube, etc.). Others have had similar problems and seems to have worsened with update of the last update of Safari (9.0.3) or the operating system to El Capitan (10.11.3).

    An idea of the problem or possible solutions?

    1. System Preferences > Flash Player > advanced > delete all the

    Press the button 'Clear all' under 'Navigation data and settings.

    Test now.

    2 safari > Preferences > privacy > Cookies and data from the Web site:

    Press the button "delete all data from the Web site.

    Press the button "Details".

    Delete all cookies except Apple, ISP and your banks.

    3 safari > Preferences > Extensions

    Disable all extensions, restart Safari and test.

    Allow one and test.

    To uninstall one, select and click the "Uninstall" button

  • P series too hot and sound card problem

    Hello

    in recent weeks, I have a problem with the temperature. The P series of satellites is much too hot, even if only the essential progs are running, the processor runs with 100% very often. Without the Task Manager (to close the CPRS) of "windows" the machine crashes several times down!

    And since I've updated the driver sound in August this year, the sound may not be performed correctly. The sound card is not identified by diff. progs. MP3 direct cut and sound blaster, during the race.
    I can't save anything! So bad!

    Hello!

    Clean the laptop? You can use spry compressed air could blow the dust from the cooling fans. So do not disassemble anything.

    Which audio driver use? Toshiba or manufacturing as Realtek? Maybe there already is a new or try again with the old driver.

    Moreover, what Satellite phone do you have?

    Good bye

  • I am facing a problem with the beep.vi. I have a DAQ program, which acquired the signal and compare it to a threshold value. When a signal is out of range, a Visual and sound alarm has occurred. I use the VI beep.vi to generate the sound.

    I am facing a problem with the beep.vi.  I have a DAQ program, which acquired the signal and compare it to a threshold value. When a signal is out of range, a Visual and sound alarm has occurred. I use the VI beep.vi to generate the sound. Everything works fine except the sound alarm. It gives the table 1 d of type mismatch. I tried to fix this by placing it in a box structure. But it still does not work. If someone could help? Please find attached my VI. Best wishes to all visitors to the Forums of Discussion OR.

    Ihab El-Sayed

    published here: http://forums.ni.com/t5/LabVIEW/Playing-sound-based-on-exceeding-a-threshold-value-1D-array-data/m-p...

  • Windows Explorer does not and sound problems

    I'm running Vista (home edition) on a laptop and I'm having problems with my windows Explorer. The other day it was working fine and I have updated to service pack 2, after he installed my computer went crazy! My exporer windows keeps "not responding" and whenever he "closed the program" my office went nuts it shows not all of the icons (on my desktop) until I raised the Task Manager and the taskbar kept resetting itself to I don't know what. I would go in the taskbar properties and sometimes he let me check the power, network and sound icons and sometimes it would be grey so I could not. I uninstalled the update and it seems to work very well a bit, windows Explorer still fails sometimes well. What is really bugging me, is that a previous update messed with my sound, so sometimes I have to go into the Device Manager and disable then enable the sound to get it back (the driver is up-to-date). But sometimes the Explorer is not responding so I feel like I'm going in circles! The other problem is that after installing service pack 2 is my computer guard with "unexpected cases" and it still occurs even after uninstalling service pack 2. Does anyone have any ideas what the hell is happening? I ran all my software, adware, spyware viruses and everything else so I know that my computer is clean. It is service pack 2 or is it my computer? Also, I have an idea of what I'm doing, so I'm not a complete fool. Any help would be greatly appreciated! Sorry if this is in the wrong forum, I don't have my 5 cups of coffee yet this morning.

    Hello, POOLMASTER7

    Try to do an analysis of the file system to verify inconsistencies. Go to start, all programs, accessories, tools system right click on command prompt and choose Run as administrator. You may be prompted to continue. In the command prompt type the following command, press on enter and let us know the results: sfc/scannow

    Thank you.

    David
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Music and sounds are coming through too fast and too sharp.

    Music and sounds are coming in my treble speakers too much and too fast. Looks like Alvin and the chipmunks. It happens on all sounds from a CD or the Internet. All diagnostics check out OK. It's Windows XP. Any ideas how to adjust the sound quality?

    Hello Jcbrewer,

    Thank you for your message.  Take a look at the information below which I copied from http://www.microsoft.com/windows/windowsmedia/knowledgecenter/mediaadvice/0067.mspx.
    Why my music sounds like chipmunks sing?

    Don't worry, little domestic rodents in Windows Media Player is not configured. Instead, the clock of your soundcard probably has a timing problem. To resolve this issue, try to reduce the level of hardware acceleration for your sound card by following these steps:

    1.

    In Control Panel, open sounds and Audio devices.

    2.

    In the Volume , in the settings area of the speaker tab, click the Advanced button.

    3.

    In the Advanced Audio properties dialog box, click the performance tab and adjust the hardware acceleration slider to adjust the calendar clock for your sound card.

    Remember that, if your sound card supports multi-channel (5.1) audio playback, turn off hardware acceleration (moving the cursor of None) will cause the sound card to play all the audio multichannel stereo (two speakers).

    If you can't solve the problem by adjusting hardware acceleration, you can check with the computer manufacturer for an updated audio driver.

    Another possibility is that it could be a joke any.  You can perform a clean boot that will start the computer without programs 3rd party.  The steps are below:

    1. Click Startand then click run.
    2. Type msconfig in the Open box, and then click OK.
    3. On the general tab, click Selective startup.
    4. Under Selective startup, clear the following check boxes:
      • SYSTEM process. INI file
      • Process of VICTORY. INI file
      • Load Startup items
    5. Click the Services tab, select the hide all Microsoft Services check box, and then click disable all.
    6. Click OK.
    7. When you are prompted, click restart.
    8. After the computer starts, start the program or game and see if the problem is resolved.
    If the problem is resolved, you can check in Add/Remove programs to see if there are any suspicious software that needs to be removed.  You can also check your startup programs in MSCONFIG.  To access msconfig, click on 'Start' > select "Run" > Type msconfig in the box and click on enter.  You will see the Startup tab, you can check all suspicious programs start at startup and remove them.
    See you soon

    Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

  • Music and sounds of the game won't play; all other sounds work

    I have an iPod 5th generation touch. I checked my volume and the volume of ringtone and leaves. All the sounds are turned on. I checked for if sure speaker working, (it does because the music plays and keypad lock and sounds of device clicks), and I checked in game controllers and all sense I could think of to make sure sounds is enabled. I check everywhere he looks good, but the sounds of the game will not play AGAIN. I'm starting to think that maybe it's a problem of material with my iPod touch 5g because I also have a 6g-key and everything works on it just. Does anyone have any ideas if I could solve this problem?

    Try:

    -Reset the device iOS. Nothing will be lost

    Device iOS Reset: Hold down the On / Off button and the Home button at the same time for to

    ten seconds, until the Apple logo appears.

    -Reset all settings

    Go to settings > general > Reset and tap reset all settings.

    All your preferences and settings are reset. Information (such as your contacts and calendars) and media (such as songs and videos) are not affected.

    -Restore from backup. See:

    Restore your device from an iCloud or iTunes backup - Apple Support

    https://support.Apple.com/en-us/HT204184

    -Restore factory settings/new iOS device.

    If still problem, make an appointment at an Apple store Genius Bar because it appears that you have a hardware problem.

    Shop Apple Store - Genius Bar

    https://www.Apple.com/retail/Geniusbar/

  • When I try to install an add-on, it load completely and said so "seconds remaining" and never move forward. What should I do to remedy this?

    When I try to install an add-on, it load completely and said so "seconds remaining" and never move forward. My connection and the computer properly. I have the latest version of Firefox, it is updated. I get this add-on for the mozilla site, what should I do otherwise?

    Please update your firefox latest version Firefox 25 and check whether the problem exists or not

  • 12 Firefox is very slow to load pages and if two tabs are open, it lag.

    12 Firefox is very slow to load pages and if two tabs are open, it lag. I've tried everything (e.g. virus, Defrag, I created a new profile in "run", etc.). I had my router/line checked everything etc and after 2 weeks of cleaning/testing etc its all pointing to Firefox as the problem. Please help because it's driving crazy me.


  • Tecra S5 - FN and sound keys do not work

    Hi, I have problems with sound in Notepad, when the noise stopped working, I reinstalled the sound drivers but the sound does not work.

    The FN keys do not work in the other direction, I can "adjust brightness and sound with the FN keys. I too reinstalled the utilities, but when I run the "accessibility" a windows popup is shown in the screen that says: "the registry is missing or can be broken."

    I don't know if the two problems can be related to each other, but both began to arrive at the same time.

    Thanks in advance and best regards,
    Dani.

    Hi dmorenob,

    What operating system is currently installed?

    Sound card is listed in the Device Manager?

  • Firefox does not load pages and said "Stopped" in the lower left corner of the screen.

    Latest FF and XP Pro. 2.4 Ghz Celeron processor, 1 GB of RAM. FF will work for awhile then it will stop loading pages and say 'Stop' in the lower left corner of the screen. Sometimes I can refresh and the page loads, but 95 out of 100 times I can keep refreshing and it will say "stopped". Alternatively, the page will be partially load and then quit and say 'stop. ' I disabled IPv6 and DNS Prefetching and he always does. IE does the same. VERY frustrated. My last PC started doing this and I've finally upgraded to a newer version and it was fine for a few months, but began to do the same thing recently. Arghhh... Thank you!

    This has happened

    Each time Firefox opened

    is with my last computer a few months ago

    You, me and many others (from discussions throughout the net) have this same problem. I had a few glances at Mozilla, take a look, they couldn't find a problem or a solution.

    Here's what I found works - the problem arises on me when I upgraded to Firefox 3.63. 3.63 FF of uninstall and install 3.59. You can always download until the end of June or July I think.

    My problems went away with 3.59. Seems to only affect users of Windows as Mac Firefox 3.63 works very well.

    Found a few discussions pointing to ZoneAlarm Firewall time-out managers and some download tools. I have ZoneAlarm, so I don't think that was the cause, just another victim.

    I wish Mozilla would pull the plug on 3.63, repackage as 3.64 3.59 and go back to the drawing board until they find out what is wrong.

  • Qosmio G50 - 10I - no synchronization on TV between the picture and sound

    My problem is that there is no synchronization between the picture and sound (+ the sound is thin about 5 seconds +)
    When I watch TV on Windows Media Center on the Qosmio G50 - 10I

    I tried to change the settings in Windows Media Center, but some will escape.

    How to connect this TV to the G50?
    You use the HDMI cable that provides audio and video signal together at the same time or you connect the TV with two different cables (for audio & video signal)?

    Also check the settings in Realtek HD audio Manager located in the control panel. Here, you can change some sound effects for different outputs (digital speakers, HDMI) audio

    PS: Last but not least install codecs. I recommend a package called K-Lite Mega codec package

  • I get a popup that says no audio device imput found. Make sure that your audio hardware is workingand check your audio configuration in the audio device and sound themes control anel

    I get a popup that says that no sound device imput is to make sure that your audio hardware works and check your audio configuration in the audio device and sound control panel themes

    Hello

    1. what operating system is installed on the computer?

    2. when exactly you receive this pop up?

    3. able to play sounds using Windows Media Player?

    Please provide more information on the issue so that we can better help you.

    In the meantime, try the troubleshooting provided in the link below steps to solve the problem.

    No sound in Windows

    http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

  • update of security guard loading over and over again KB2707511

    My computer Guard Security Date KB2707511 of loading over and over again what can do.

    Hello

    I suggest you try the steps from the following link:

    Troubleshooting Windows Update or Microsoft Update when you are repeatedly offered an update http://support.microsoft.com/kb/910339

    Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article: http://support.microsoft.com/kb/322756

  • My Vista 64-bit is down packages. Load slowly and video streaming does not work.

    My Vista Home Premium 64-bit, is dropping packets. It load slowly and streaming video doesn't work well at all. I changed the modem DSL/wireless 3 times now. The problem persists. I am told that this may be the result of the execution of Windows Vista. It loses about 31% of the packets of information that are sent to, as determined by a test via my DSL server. Is there a fix or I just need to upgrade to Windows 7?
    Help, JMick-lore

    I have the same exact problems with vista.  I tried modems so switching.  I can't listen to anywhere on the computer including windows media player.  Just restored my pc to the factory and the problem is still there.  Don't know what to do.

Maybe you are looking for