Problem Mapping H:\\etcetera\etcetera drive... Error #:-2147024843

Similar Questions

• Start up and boot problem. Hard drive error. HP pavilion laptop Home Premium. Windows Vista preinstalled. No cd came with it.

  Nothing new added to comp. Got the hard drive error message and followed the instructions to fix/repair. All translations tried (almost every test suggested/memory/hard drive, etc.) could find NO problem with the memory or hard drive.  Once I have pass the problem to boot/start the computer works fine!   Crazy!  Any sugg. would be appreciated.

  Hello

  ·        Since when are you facing this problem?

  ·        What are the fix and repair that you tried to solve this problem?

  ·        Outside this disk verification error, do you get any other error message?

  Method 1:

  I suggest you to do a scan of the SFC. File system (CFS) Auditor verifies that all Windows 7 system files are where they should be as they are by default and not corrupted, changed or damaged.

  ·        Click Start, click principally made programs, accessories, right-click on command prompt and select run as administrator.

  ·        Click on continue or provide administrator credentials if prompted.

  ·        In the command prompt window, type the following text, and then press ENTER:

  ·        sfc/scannow

  ·        You should see the following message on the screen:

  § Begin the analysis of the system. This process will take time.

  § Beginning verification phase of system scan.

  ·        % Of verification complete.

  ·        Once the scan is complete, a test to see if the problem you are experiencing is resolved or not.

  For more information, see the article mentioned below.

  http://support.Microsoft.com/kb/929833

   

  Method 2:

  I suggest you to set Chkdsk to run when the system restarts the next time. Follow the steps mentioned below to set Chkdsk to run when Windows Vista reboots the next time.

  a. click on start, then run.

  b. in open, type cmd, and then press ENTER.

  c. use one of the following procedures:

  Procedure 1: To run Chkdsk in read-only, at the command prompt, type chkdsk, and then press ENTER.

  Procedure 2: To repair errors without scanning the volume for bad sectors, at the command prompt, type chkdsk volume: / f, and then press ENTER.

  Procedure 1: To run Chkdsk in read-only, at the command prompt, type chkdsk, and then press ENTER.

  Note: If one or more files on the hard disk are open, you will receive the following message is displayed:

  a. Chkdsk cannot run because the volume is in use by another process. You want to schedule this volume to check the next time the system restarts? (Y/N)

  b. Type O, and then press ENTER to schedule the disk check, and then restart your computer to start the disk check.

  Procedure 2: To repair errors, locate bad sectors and recover readable information, at the command prompt, type chkdsk volume: / r, and then press ENTER.

  Note: If one or more files on the hard disk are open, you will receive the following message is displayed:

  a. Chkdsk cannot run because the volume is in use by another process. You want to schedule this volume to check the next time the system restarts? (Y/N)

  b. Type O, and then press ENTER to schedule the disk check, and then restart your computer to start the disk check.

  You can see the article mentioned below for assistance.

  Check your hard drive for errors

  http://Windows.Microsoft.com/en-us/Windows-Vista/check-your-hard-disk-for-errors

  Method 3:

  I suggest you to do a system restore. Follow the steps mentioned in the article below.

  What is system restore?

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore

  System Restore: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• Deletion of a project in insight source (trial version) that has been mapped to a network drive results in the Stop error code 0 x 00000027

  Deletion of a project in insight source (trial version) that has been mapped to a network drive in clearcase... .the deleted when I got this error...

  Kindly give me a solution...

  Original title: error code 0 x 00000027

  At the error repeated or leave all the undesirable consequences? Unless there is probably not merit to be investigated further.

  Verification of bug code 0x27:
  http://msdn.Microsoft.com/en-us/library/ff557446 (v = vs. 85) .aspx

• Hard drive error (03F1)

  Hello, thank you for your time. During recent months, I was faced with a serious problem: I get a message "HDD error (03F1)" on my HP Pavilion 1d72nr g6, but only in special cases. Special cases that I mentioned are the moments where he decides to stop reading my HARD drive. There is no obvious motive for the failure messages, and if I leave it alone, it tends to function again after a while. If I need it immediately, removing and reinstalling the internal components sometimes make the tour, giving me anywhere from 20 seconds to a few hours. After the randomly generated time it stops, usually flashes a BSoD and fails to initialize the disk to write the memory dump. Disk booting does not is expected if there is trouble reading from the disk. Sometimes when it crashes it will start IO throwinf errors. These usually just indicate that there was a problem while reading from the HARD drive and store it in memory.

  The first thing I thought was that I had to replace my hard drive, as it was the most obvious first step, and it worked. For a period of time. I upgraded to a 640 GB 5400 RPM for a 1 to 7200 RPM. It took about a month so he can restart from scratch on the same page.

  I can say with confidence that this is not a failure of hard drive for two reasons: first, there is no damage to subsequently file system; Second, while it is plugged somewhere else, it works as it should.

  Here, that's what I've troubleshooted so if you ask, I'll describe how I troubleshooted each component:

  1. HARD DRIVE
  2. HARD drive connection map (not to be confused with the PCB of HARD drive)
  3. Power brick & battery
  4. RAM memory modules
  5. BIOS

  That leaves what follows, at least from what I can deduce:

  • Components of the motherboard
  • Processor

  And because a dying CPU seems to be fairly binary (it works or it doesn't), rather strongly, I can exclude that he is the culprit.

  This leaves the motherboard. But my personal thought was that a motherboard was also a binary component, then why should it work if sporadically?

  Any help in this would be surprising, as the replacement of the laptop is currently not in the budget.

  Thank you for your time,

  Max.

  Your logic is flawless until the last hypothesis. Indeed, central units are "binary" (works or it does not work) but not motherboards. They are fickle demons and a bad capacitor can drive a technician crazy trying to track down the problem. Suffice it to say that a seasoned technician could not do more to diagnose the problem that you have, and the answer is... bad mother.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• Windows 7 Home Premium cannot map NAS / network storage drives

  Hi, I'm currently on a PC Windows 7 Home Premium and I have two 2 NAS drives.

  I am running a Buffalo Linkstation (old version) and a new Iomega Home Media Network Hard drive.

  Initially I thought it was just my Linkstation from Buffalo who is older and has had no updates of the firmware that cannot be mapped as a network drive. But I just got my new Iomega hard drive today and installed the latest firmware and software. The Iomega software detects the drive and all of its shared folders but the problem is that I can not map any shared folders as a network drive, making it useless on my Windows 7 computer.

  I can access both NAS drives on my windows xp pro machine very well.

  I got off the phone with Iomega technical support and they said that it is a well known problem with Windows 7 Home Premium and readers of Samba. Is there someone out there who can give me a solution? I already tried the fix LMCOMPATIBILITYLEVEL on other forums I found by changing the values 1 or 2 - but still no luck.

  It gives me an error of network even when I try to connect to the ip address of the NAS, however - it appears on my network but I can not access or map!

  I really want to get my readers network running on windows 7 Home Edition premium without having to upgrade to other users are still having problems, I read. It's a little pathetic I can't even map a network drive on my pc.

  I had exactly the same problem with my drive hard Lacie network. If your drive contained donkey type of media, music, or video, Win 7 use the reader as a "Windows Media Connect" device, opening the disk in Media Player, showing only media files...

  This prevents access to all ot0her of the player records.

  However, I found that it is possible to add the drive as a network drive, if you know the name of the root folder.

  In my case, it's "openshare", so when you enter the path to network drive, I use \\192.168.xxx.xxx\openshare, and it allows me to access the drive...

  Why Microsoft chose to make this type of access to the files of so difficult to get simple network, just blows my mind, knowing that WinXP has it done easily...

  I hope you were able to understand my English, and that this could be useful.

  Kind regards

• The screen of the Media Center driver error (w / 7750 HD or GTX 650 Ti)

  I had used the Radeon HD 7750 fits. I use the ceton cable card tv tuner nfinity, everything is configured with the map and the television company by cable. The channels work only the work around, reduce then maximize. I get the error "display pilot error" whenever I select live TV. So I replace the nvidia GTX 650 Ti graphics card, which directly tells me the card is HDCP Compatible with the driver and the display. I run Media center and still get the same error message from pilot view.

  How can I fix with a graphics card to work?

  Windows 7
  12 GB of ram
  Currently using: ti gtx 650
  f1a75-m pro motherboard r2.0
  APU AMD 3850

  The following instructions:
  http://cetoncorp.com/support/index.php?/Knowledgebase/article/view/40/22/blue-blinking-led

  Fixed the problem of unavailable Service.

  now I can watch the cable without having to minimize it and maximize workaround

  Although I still don't have any idea what caused my display driver error issue before.

• Satellite T130-02F - display driver error

  Hello

  I just bought the Satellite T130-02F and after choosing 32-bit operating system, I had the power to recharge the battery and then started to get 'to display driver errors"where the screen black flash and then flash back on. I checked Device Manager and Driver Details, the reader is up to date and as far as I can see is the suitable driver. I searched websites to see if there are other drivers out there ar, but its update.

  I have nothing more have not installed on the computer again and find that I get the error more regularly on the farm rather than power, that concerns me. The computer is less than 24 hours old.
  Any advice?

  Mobile Intel (R) display firmware.
  Windows 7 32-bit is installed.

  Hello

  In your case I would try to reinstall the display driver. You can find the latest version on the Toshiba site:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  After that, make sure that the latest version of the BIOS is installed. You can download the Toshiba site too.

  If nothing works your only chance is an authorized service provider. It seems to be a hardware problem and should be checked for professional people.

  Welcome them

• Satellite Pro A40 guard stop with the ATI driver error message

  My girls having some problems with her laptop and get back to Uni at the end of week for me to have a look on.

  Basically, he keeps closing sometimes with an ATI graphics driver error message. I had updated the memory last Christmas and resinstalled from scratch.

  My first impressions are it is overheating and I probably need to clean the fan, was wondering if anyone had any ideas?

  Thank you very much
  Keith (South end)

  Satellite Pro A40 is about 3 years old and it is possible that the unit needs to be cleaned. If the appliance is used intensively, I assume that there is more dust inside. By overheating of the appliance stops suddenly without any warning.

  As a first step the device. I don't know if it's the right idea to do it alone, but if you are familiar with laptops, you can give a try. After having done that, your daughter should carefully watch what happens the next few days.

• Satellite L350 - persistent master hard drive errors

  I've known persistent main hard disk errors. Errors, in their first incarnation, were windows freeze at loading screens and screensavers, and then developed by stopping Windows to boot at all. It certainly would not start normally and sometimes would not start in safe mode. I used the recovery partition to restore the computer to its factory settings. A day or two later, the same symptoms began to manifest again, although not as severely. The hard drive errors, freeze on screens and loading screen savers.

  My question is: if I re - format the hard drive master, thus destroying the recovery partition, I could then just restore windows from a newly formed recovery CD? And, in addition, what is the probability that reformatting the drive hard completely would have an effect on the frequency of errors?
  If the hard drive is simply borked, format or not? And if yes, what is the next step?
  Could I restore windows on my drive hard slave and give up on the master?

  Thanks in advance.
  Mike

  Hey Buddy,

  Are you sure that all these problems related to the HARD drive at 100%? How did you check that?

  I don t mean it s not the HARD drive, theoretically, you could be right but before you think to change the HARD drive please use a diagnostic tool special for HDD as Drive Fitness Test:
  http://www.HitachiGST.com/support/downloads/#DFT

  This tool can check your HARD drive for bad sectors.

  If the HARD features of bad sectors disk, formatting will not help you because the sectors are physically damaged. With other words, the only chance is to exchange it.

  But if you have already used the recovery feature of HARD Toshiba drive to reinstall Windows you can say s that no problem of software and it must be hardware related. ;)

• No Audio device and Audio HDA Bus Driver Error Win XP SP3

  Hello

  I'm running a put together computer, with Windows XP SP3. I've recently accidentally got rid of my sound on my computer, eliminating the bad program in Add/Remove programs. I know that my computer is running Intel (r) 82801 AA AC 97 Audio Control. So I went to the thought of their site, I had deleted the drivers and audio devices. I downloaded the current driver, but this has not fixed the problem even with an update. So I went hunting online and found this link http://www.youtube.com/watch?v=9idzHNWZLP0

  , thinking maybe that would help me even though I am not a user real tek (have intel of course). But he said that it is compatible with windows xp. I tried downlaoding it and got the error: "could not complete the installation: missing Audio HDA Bus driver.

  So now, it seemed to me, I had not only a mistake, but two. I tried to download a driver of Bus HDA, but this failed. I tried to look in the Device Manager to see if there was a red or yellow marker next to my audio devices and maybe they needed to be reinstalled. Showing a problem there, he said nothing everythign was working properly. I tried to use Soundmax audio driver as well, but who was also discussed with the bus driver error. I also went to http://noaudiodevice.com , and these solutions do not work either because I was not faced with a problem of yellow or red marker. I also did this off stupidly deletling the bad thing no one updated.

  I'm almost at a loss at this point and was way over my head to start.
  I could really use some help. I know that my computer when I had one month ago second hand but wiped off, had run soundmax. If you need more information about my computer or screen shots please let me know. I looked at the subjects here, and none seem to adapt to this situation for me.

  Did you get the specific drivers for your motherboard?
  If this isn't the case, remember to search the downloads specific to what you have.

  You can try a system restore: http://support.microsoft.com/kb/306084

• Can't turn on my XP computer, includes a multi driver error

  He has a multi driver error I can enter the command prompt, but it doesn't let me do a chkdsk r he says he's busy and just a chkdsk there doing nothing, but does not go into windows? any suggestions

  Hi JeannieBellLW,
   
  -What exactly happens when you try to boot into normal mode on your computer?
  -You receive an error message? If Yes, indicate the same.
  -What has been the recent change that was made on your computer before this problem started to happen?
   
  Try to start your computer in safe mode and check if you can successfully start.
   

  Safe mode starts Windows with a limited set of files and drivers. Startup programs do not work in safe mode, and only the basic drivers needed to start Windows are installed.

  Refer to this article to do the same thing:

  A description of the options to start in Windows XP Mode

• Add/Remove components error and DVD driver error: Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39)

  Original title: Add/Remove components error and DVD driver error

  Yesterday, I removed several components of windows to attempt to clean my cpu. After the reboot, I noticed that my DVD drive disappeared. I tried to update the driver but told me I have the most updated version, I uninstalled and reinstalled the drive, but I still get the same error. Under Driver Details, it shows that I have a lot of drivers for my Phillips DVD player. However, the status of the device is the following: Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) Click Troubleshoot to start the troubleshooter for this device. I've done the troubleshooting, and the two options has not fixed the problem.

  Then I tried to add windows components that I removed, thinking maybe that was the problem. However, when I try to add them, I get an error message that says: 'Setup cannot copy the file zClientm.ex_' it shows the location of this file as being in windows/i386, and of course, the file is located in this folder. So when I go to browse to locate the file, I find and click on it to open it, but I keep getting the same error message that the file is not found and Setup cannot continue.

  I realize that this problem seems very rare and weird, but any help at all would be appreciated. Thank you.

  Hello
   
   
  Code 39: Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39)

  Explanation of error codes generated by the Device Manager in Windows XP Professional http://support.Microsoft.com/kb/310123

   

   

  Method 1.
  Microsoft Automated Troubleshooting Services scans your computer and detects that the root causes of common problems, then automatically solves the problems that he finds and offers additional resources if the problem is not resolved. Click run now in the article below.

  Your CD or DVD drive cannot read or write media
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

   

   

  Method 2.
  Also, try the methods listed in the section below and check.
  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.Microsoft.com/kb/982116

   

   

  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Install the driver error: "insufficient system resources exist to complete the requested service."

  When starting my computer (Dell laptop) Vista, it asks to install the Broadcom Ethernet driver.  I click "locate and install driver software" and it returns the error:
  Install the driver error: "insufficient system resources exist to complete the requested service."

  How can I fix?

  Hello

  ·         What antivirus software or security is installed on your computer?

  ·         Did you recently change on computers such as installing any application?

  Step 1:

  Temporarily try to disable the antivirus on the computer program and check if the problem persists.

  Note: Check that you activate your anti-virus protection on the computer back after you complete these steps. It is not recommended to disable these settings on the computer. It's just to solve the problem.

  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  Step 2:

  I also suggest you to download the drivers from the Dell website and check if it helps.

• portable device driver error - code 31

  Gidday everyone,.

  Rig = AMD Athlon II x 4 620 clocked at 2.6 ghz, 2 GB Ram, Win 7 Ultimate 32 bit SP 1 on Asus M4A78

  bios mod-

  config sys: ide to ahci (to improve the rate of the ISF, NCQ; using sata, ide, no raid)

  reset for win 7

  blue screen

  back to ide

  reset

  www for solution - registry mod help:

  KEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\msahci

  CHG of DWORD from 3 to 0

  reboot ok for Win 7

  improve the exchange of data

  started victory day

  installed optional AMD - other materials, Storage Controller - AMD SATA controller,

  published March 2013

  Update said "with success."

  Reboot as required by the update

  Device driver error 31 on portable devices

  (Two) WPD filesystem Volume driver

  :-(

  Active BIOS, no change

  reset

  BIOS - return to the ide

  Restart

  no change, still error 31

  Restored AMD update

  error 31 remains

  hands up in the air

  NB. earlier this year the experience even device driver error 31 on portable devices on portable devices for WPD filesystem Volume driver. Investigations at the time found no solution. However, think has an update of the applied victory since then "arranged" the error. The error was not apparent immediately before the update to AMD.

  Grateful for the help please.

  Have '

  Hello

  Thanks for posting your query in Microsoft Community.

  I understand your concern and will help you solve this problem.

  I suggest you try using the steps described in these Microsoft help articles and check if it helps.

  What to do when a device is not installed correctly
  http://Windows.Microsoft.com/en-us/Windows7/what-to-do-when-a-device-isn ' t-installed-correctly

  Restore a driver with its previous version
  http://Windows.Microsoft.com/en-us/Windows/restore-driver-previous-version#1TC=Windows-7

   

  I hope this helps. If the issue is not resolved, please get back to us and we would be happy to help you.

   

• My window 7 showing message "a problem with the NVIDIA Graphic driver", but I can't download the solution

  My Windows 7 PC at home keep crashing and I keep losting my screen when I played the game on the last 6 months.  After I restart my PC, it says that there was a screen.   I had since a few Update window update driver and try the NVIDIA drivers with no will.  There were a few times he were message indicating the "resolve a problem with the NVIDIA graphics driver" on the taskbar.  When I click on the message and try to download.  It gives me the message that "your computer was not able to download the solution at this time.  Make sure that your computer is connected to the internet, and then try to download again"that had happen all the time, and of course, I had access to the internet all the time!  I'm getting nowhere for solve this problem.  Can anyone help?  I want to know if there is something I need to know the video driver as usual outside the upgrade.

  PS I tried a lot of stuff, running the troubleshooter from the performance.  I had an i7 with plenty of RAM, running only a few program, hard disk error not... etc.  It seems related to the video driver. I update my window.

  Hello Lewie,

  Thanks for posting your query in Microsoft Community Forum.

  1. What is brand and model your computer?
  2. You did it any significant hardware or change software on the computer before this problem?

  I understand that you lose your screen when you play a game. This happens usually if the installed graphics driver has corrupted or unstable. Therefore, I suggest trying the following methods and check if the problem persists.

  Method 1: Run the tool material and devices

  Try running the next fixit and check whether the problem is resolved.

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  Method 2: Update your graphics card

  1 open Device Manager by clicking the Start button, click Control Panel, click System and Security, and then, under System, click the Managerof peripheral . If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  2. in the list of hardware categories, find the display adapters and select the device driver you want to update, and then double-click the device name.

  3. Click tab driver , click Update driver, and then follow the instructions. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  For more information, visit the below mentioned link:
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  If you are not able to update the device driver via windows update, you can visit your computer or graphics card manufacturer (NVIDIA) Web site and download & install the latest driver. Or contact the manufacturer of your system to do.

  For reference, you can also consult the following Web page. Click on continue to this site Web (not recommended) if you are prompted for any error of certification.

  A problem of NVIDIA graphic driver

  Hope this information is useful. If the problem still persists, please post back for further assistance, we will be happy to help you.