Problem network and restore do not work.

Similar Questions

• XP pro have two problems: the system restore will not work and rdpclip seems to work computer

  I had a virus, trogan, stopzilla online to fix the problem after allowing access to my computer, (it's a virus) tried to uninstall this program, finally just disabled and removed from the start menu.

  Now, in the pc Registry mechanic tool the first thing listed is rdpclip as run from my computer.
  Since that time I have been unable to use system restore from windows system.   only restore I access is
  from backups of registry mechanic even if I went and set on system restore after that I checked the settings and discovered that they had been handed over to OFF.
  I used the restore before so I know it worked before the access help online.

  Is the solution just to disable repclip?   I have access to my computer so that I have to allow access by external connection...
  computer programs run more slowly, there is always time to wait before the update when I try to use wp-admin to make changes on my Web site.

  Former title changed, but explains the problem
  XP pro, has had a problem with virus removal program, it turned off because it wouldn't uninstall.  Now when I run Registry mechanic it shows my system being run by rdclip.  I can't use the windows system restore.  Points on the calendar are lit up but do not work.  Can I use mechanic registry to disable the rdclip? in auto start menu?  If so this might restore ability to use the system restore?

  Hello

   
  1. you receive an error message when running the system restore?
  2. which antivirus app do you use?
  3. what happened when you try to uninstall the program?

  4, are service packs installed on your computer?

   

  To uninstall the application:

  Method 1:

  Run the hotfix, restart the computer and try to uninstall

  Problems with programs that cannot be installed or uninstalled.

  http://support.Microsoft.com/mats/Program_Install_and_Uninstall

   

  Method 2:

  I suggest to keep the computer in a clean boot state and check the status of the issue.

  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353
  Note: After you have used the boot is a way to solve your problem, you can follow these steps to configure Windows XP to start normally.

  I also suggest that you scan your computer with the Microsoft Security Scanner, which would help us to get rid of viruses, spyware and other malicious software.

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.
  
  http://www.Microsoft.com/security/scanner/en-us/default.aspx
  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.
  Important: While perform analysis on the hard drive if bad sectors are found on the hard drive when parsing tent repair this sector if all available on which data may be lost
   
  To solve the problem of system restore:
  I would sugggest you to go through the link following.
  Steps of troubleshooting for problems when you try to use the System Restore tool in Windows XP.

  http://support.Microsoft.com/kb/302796

   

• Update problems - touchpad and keyboard do not work!

  After you install an update, the touch pad and the keyboard on my laptop won't work.  I was able to use a wireless mouse, after a few failed attempts.  Any suggestions?

  Hi jennkjohns,

  1. what happens when you connect the keyboard to the computer?

  2. what update has been installed on the computer?

  Method 1

  First of all, I would say you visit your laptop manufacturer's website to download and install the updated driver for the touchpad and check if it works.

  Check in the Device Manager, the State of the keyboard.

  Get help with Device Manager errors

  http://Windows.Microsoft.com/en-us/Windows-Vista/get-help-with-Device-Manager-errors

   

  Method 2

  Checking update was installed before that the problem occurred.

  (a) updates installed open by clicking the Start button, click Control Panel, click programs

  (b) and then, under programs and features, click view installed updates.

  Once you know the update's KB number then visit the Microsoft Download and put the number in the search box, download and install the update manually after placing the computer in a clean boot state.

  http://www.Microsoft.com/downloads/en/default.aspx

  To help resolve the error and other messages, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See the link below to learn more about how to clean boot.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

  See the link below to learn more about how to clean boot in Windows XP.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Cold Oracle EBS backup and restore does not work

  Hello
  
  I made a backup with tar, while the database is open and not in mode archive (archivelog disabled) and restored on another machine.
  OS = AIX 5.3
  Oracle EBS 11.5.9
  9i database
  
  When I started the database I had errors.
  
  Is there a metalink document that will help me to recover the database?
  
  
  I followed the following Metalink:
  
  Database startup fails with ORA-01113, ORA-01110 errors [146039.1 ID]
  Common causes and Solutions in case of error ORA-1113 in backup & recovery [ID 183367.1]
  However, I note that the foregoing applies in the case of archivelogs = active
  My case: archivelogs = disabled
  
  SQL > startup mount pfile=/oracle/proddb/9.2.0/dbs/initPROD.ora
  ORACLE instance started.
  
  Total System Global Area 615482512 bytes
  Bytes of size 742544 fixed
  436207616 variable size bytes
  167772160 of database buffers bytes
  Redo buffers 10760192 bytes
  Mounted database.
  SQL > SELECT V1. FILE NO., NAME
  V $ BACKUP V1, V$ DATAFILE V2
  WHERE V1. STATUS = 'ACTIVE' AND V1. FILE # = V2. FILE NO.; 2 3
  
  no selected line
  SQL > restore database using backup controlfile until cancel;
  ORA-00279: change 3368247542 September at 10/02/2013 03:07:21 needed for thread
  1
  ORA-00289: suggestion: /oracle/proddb/9.2.0/dbs/arch1_637.dbf
  ORA-00280: change 3368247542 thread 1 is in sequence #637
  Specify the log: {< RET > = suggested |} Filename | AUTO | CANCEL}
  Cancel
  ORA-01547: WARNING: RECOVER succeeded but OPEN RESETLOGS would get below error
  ORA-01194: file 1 needs a recovery more match
  ORA-01110: data file 1: ' / oracle/proddata/system01.dbf'
  ORA-01112: media recovery not started
  
  SQL > restore database using backup controlfile until cancel;
  ORA-00279: change 3368247542 September at 10/02/2013 03:07:21 needed for thread
  1
  ORA-00289: suggestion: /oracle/proddb/9.2.0/dbs/arch1_637.dbf
  ORA-00280: change 3368247542 thread 1 is in sequence #637
  Specify the log: {< RET > = suggested |} Filename | AUTO | CANCEL}
  
  ORA-00308: cannot open archived log ' / oracle/proddb/9.2.0/dbs/arch1_637.dbf'
  ORA-27037: unable to get file status
  IBM AIX RISC System/6000 error: 2: no such file or directory
  Additional information: 3
  ORA-01547: WARNING: RECOVER succeeded but OPEN RESETLOGS would get below error
  ORA-01194: file 1 needs a recovery more match
  ORA-01110: data file 1: ' / oracle/proddata/system01.dbf'
  SQL > alter database open resetlogs;
  ALTER database open resetlogs
  *
  ERROR on line 1:
  ORA-01194: file 1 needs a recovery more match
  ORA-01110: data file 1: ' / oracle/proddata/system01.dbf'
  
  SQL > select HXFIL File_num, substr(HXFNM,1,40) filename, Type FHTYP, HXERR validity.
  FHSCN SNA, FHTNM TABLESPACE_NAME, status FHSTA, FHRBA_SEQ sequence
  x $ KCVFH;
  
  .....
  .....
  .....
  
  419 selected lines.

  981553 wrote:
  I understand that hot backups can be done with noarchivelog and data will be inconsistent.

  Fix.

  However, the database should not be able to recover some data are there in data files and commissioning normally.

  This is my question and my concern. I looked for Metalink and couldn't find anything about it.

  I want to start the database with all this that data is present after the backup. All the solutions for such a scenario?

  If you took an offline backup, you can recover the database to restore all the files and bring services up (without recovery is needed here).

  And, as you mentioned "hot backups can be done with noarchivelog and data will be inconsistent.

  Thank you
  Hussein

• Backup and restore does not work, it always tells me to choose another point restor and try again.

  Each restore point I try he always tells me to choose another point of restor and try again.

  . Get your updated antivirus program and start safe mode.  Note that some viruses can hide from your normal antivirus program, so you really need to scan mode without failure.  To enter in Safe Mode when you turn on first, press F8 on every seconds until you get the menu, and then select Safe Mode.  Then run a complete system scan.
  -
  Microsoft has suggestions and offerings to
  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-remove-a-computer-virus
  -
  Moderator Forum Keith has a few suggestions along this line to
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/Windows-Explorer-has-stopped-working/6ab02526-5071-4DCC-895F-d90202bad8b3
  -
  If that suits him fine. If this is not the case, use system restore to go back to an earlier date at the beginning of the problem.  To run system restore, click Start-> programs-> Accessories-> System Tools-> system restore.  Click on the box that says show more restore points.
  -
  You can check the corrupted system files.  Open an administrator command prompt and run SFC if the above does not help. Click START, and then type CMD in the search box, right-click on CMD. EXE, then click on run as administrator. Then from the command prompt, type sfc/scannow.
  -
  Finally if all else fails, you can look at the rather cryptic system event log.  To make, click Start-> Control Panel-> administration-> event viewer tools.  Once in Event Viewer system log-click and scroll entries looking for these "error" with indicator see if you can find guidance on where the problem may be.
  `
  I hope this helps.  Good luck.

• "Problem reports" and Solutions do not work

  Running Vista Home Premium.  Under "reports on the problems and Solutions:

  1. "check the new solutions" is gray
  2. 'see problems to check' is gray
  3. "view problem history" is gray
  4. "change" works.  The parameter is set to "look for solutions automatically (recommended)".
  5. "history of solution and problem of Cloar" is grayed out
  It is said there is no solution found - but he says also last checked on September 27, 2008 (it's now July 2009).
  I am the administrator and just to be sure I tried to "run as Administrator".  Nothing different.

  Check that the error reporting Service is running. Type services.msc in the search box on the Start Menu, open the Services Console, scroll the Windows error report and double-click it. If the service is stopped, start it and change the Startup Type to automatic. Jim - MVP Windows Live - moderator of the Forum - live a care - Live Mesh - Microsoft Security Essentials

• System Restore does not work completely. Virus problem?

  When the System Restore dialog box asks me when I want to restore from I can not pass separating two to another. The instructions are to click on a date "BOLD", but most of the dates are "BOLD", (b) none of them are clickable outside today and (c) the back arrows for the previous month, while only clickable, do nothing.

  I think I have a virus or somesuch and wants to do a restore. Maybe the virus of going to stop.

  WXP SP3 Prof

  Viruses often attack the system restore because it's such a threat to them - which is certainly possible.  Unfortunately, all my anti-virus, anti-malware and anti-spyware solutions are for Vista (which is the Forum, you are in).  You must post this question in the appropriate forum where they have the information, procedures and links to help you.

  One thing, if the system restore does not work in normal mode, it sometimes will run in Mode safe then start safe mode and try it.

  In addition, if you use any Norton product, turn it off, then restart and try to restore again - Norton is known to cause problems with system restore.

  Sometimes, the problem can be solved by turning the restoration of the system off and then back on.  Unfortunately, a side effect of this is to lose all your restore points you want to restore this may not be such a good option to try (even if it can correct the underlying problem): http://support.microsoft.com/kb/310405/en-us.

  If none of the above works, please repost your question on the Forums of XP to: http://social.answers.microsoft.com/Forums/en-US/category/windowsxp where the XP experts will be happy to help you.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Vista Home Prem64 runs just older games (compatible XP) fine and suddenly will not work the games and id is 'a problem' without code or soln.

  I have a newish Vista Home Premium 64 NB and HAD no problem playing games, I played on my DT Pro XP until a few weeks ago. Now, when I go to open games, windows tells me that "there is a problem and needs to close the game" and "If a solution can be" it will inform me! Using compatibility, updated drivers, uninstalling and reinstalling have not worked. I do not understand why they worked very well and now they do not? Anyone have any ideas? It looks like my Direct X? changed to 32 bits, for some reason any-is it a problem? The Direct X is 64-bit? I also notice that it is very skittish about some other applications that I try to DL as well now - IE Puran Defrag. Thank you

  Hello
   
  Welcome to the Microsoft Windows Vista newsgroups!

  Try the following steps:
   
  Step 1:
   
  Select the game in the State of clean boot and check.

  Try to perform a clean boot. Follow the steps below:
  1. sign the computer by using an account with administrator rights.
  2. click on start, type msconfig.exe in the box start search and then press ENTER to start the System Configuration Utility.If you are prompted for an administrator password or for confirmation, type your password or click on continue.
  3. on the general tab, click Selective startup, and then clear the check box load startup items. (The check box use the file Boot is not available.)
  4. on the Services tab, click to select the skin all the Microsoft services check box, and then click Disable all.
  5. click OK and then click on restart.
  6. try to play games and check.

  See the link below for more details:
   
  http://support.Microsoft.com/kb/929135

  Step 2:
   
  Try to restore your computer to a time where it was working fine.

  It uses system restore to return your system files and settings to an earlier point in time, without affecting personal files, the restore points.
   
  For more information such as how to perform a system restore, you can follow the link below:

  http://windowshelp.Microsoft.com/Windows/en-us/help/517d3b8e-3379-46C1-B479-05b30d6fb3f01033.mspx#EI

  Step 3:

  Try to reduce the hardware acceleration on your computer and check.

  To reduce the hardware acceleration on your computer, perform the following steps:

  Click Start in the lower left corner of Windows Vista.

  Click Control Panel, click appearance and personalization, click personalization, click display settings and then click Advanced settings.

  Click the Troubleshooting tab, and then click on change settings.

  Note: The settings will be disabled if the graphics card driver does not support disabling hardware acceleration.

  Move the hardware acceleration slider to reduce it. It is the basis of acceleration.

  Kind regards

  Savan - Microsoft technical support.

• My system restore does not work even in safe mode and I can't download anything.

  Original title: Hi, one day I turned on my pc. Then, I realize that system restore does not work even in safe mode. I can't download anything. And the windows installer does not work.

  There was nothing but my background, then after 2 minutes my desktop icons appeared. But no start bar. Then, I realize that system restore does not work even in safe mode. I can't download anything. And the windows installer does not work. Help! PLeeease.

  Hello

  1. have you made changes on the computer recently?

  Method 1.
  Let us firstly the sfc scan and check if there is any missing system file.
  Reference:
  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)
  http://support.Microsoft.com/kb/310747

  Method 2.
  Try the methods listed in the articles below and check.

  Steps of troubleshooting for problems when you try to use the System Restore tool in Windows XP
  http://support.Microsoft.com/kb/

  Method 3.
  Re-enter the Setup engine
  a. Click Start, click Accessories and then click command prompt.
  b. at the command prompt, type the following and press ENTER after each line:

   
  MSIExec /Unregister
   
  MSIExec/regserver

  Method 4.
  If the problem persists, then create a new user profile and then copy your current users assigning to this profile. For more information, see:
  How to create and configure user accounts in Windows XP
  http://support.Microsoft.com/kb/279783

  How to copy data from a corrupted to a new profile in Windows XP user profile
  http://support.Microsoft.com/kb/811151

  How to recover damaged Windows XP user profile
  http://support.Microsoft.com/kb/555473

  I hope this helps.

• I have XP and had a virus. I removed the virus, but now the system restore will not work. I tried Safe Mode but clings to the confirm restore point selection. Help

  System Restore will not work

  Hi FriendFriend,

  1. did you of recent changes on the computer?

  2. do you have security software installed on the computer?

  3. you receive an error message when running the system restore?

  I suggest that you put the computer in a clean boot state, and then try to clean boot.

  It is possible that some third-party programs installed on the computer is causing the problem.

  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See the link below to learn more about how to clean boot.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

  If the previous step fails, then view the event logs to examine the system restore service errors.

  (a) click Start, click run, type eventvwr.msc/s in the Open box, and then press ENTER.

  (b) click on the category System .

  (c) click the Source tab to sort by name, and then look for "sr" or "srservice." Double-click each of these services and then evaluate the event description for any indication of the cause of the problem.

  Steps of troubleshooting for problems when you try to use the System Restore tool in Windows XP

  http://support.Microsoft.com/kb/302796

  Procedure to view and manage event logs in Event Viewer in Windows XP

  http://support.Microsoft.com/kb/308427

• When I started my computer, all my icons are larger than they should be, and if you go online, everything is bigger than it should be, and my recycle bin icon is missing. I tried restoring and that did not work. How can I fix?

  When I turned on my computer, my desktop icons are much larger than they should be.  If you go online, you cannot see the entire page because everything is so great.  I tried to do a system restore, and it does not work.  Also, my icon of recycle bin is out of the office.  Can someone help me with this problem?

  Go to the website of the manufacturer of your computer/laptop > drivers and downloads Section > key in your model number > look for the latest Vista drivers > download/install them.

  Then:

  http://Windows.Microsoft.com/en-AU/Windows-Vista/change-screen-resolution

  Change the screen resolution

  Screen resolution refers to the clarity of the text and images on your screen. At higher resolutions, items appear sharper. They appear also smaller, so more items adapted to the screen. At lower resolutions, fewer items adapted to the screen, but they are larger and easier to see. At very low resolutions, however, images may have serrated edges.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://ask-Leo.com/i_accidentally_deleted_my_recycle_bin_in_vista_how_do_i_get_it_back.html

  http://www.computerperformance.co.UK/Vista/vista_recycle_bin.htm

  http://ITsVISTA.com/2007/01/ITsVISTA-tip-19-restore-your-Vista-Recycle-Bin-icon/

  Read the links above relating to the trash.

  See you soon.

  Mick Murphy - Microsoft partner

• How to fix error 0 x 81000031. I tried recommended default restore libraries and it does not work.

  I'm unable to use the backup feature in Windows 7.  I get the error message 0 x 81000031.  Have you tried the recommended solution and it does not work.

  Hi married,

  Thanks for joining us out on Microsoft Community Forums.

  From your post, it seems that you have found an error 0 x 81000031 when you try to perform a backup.

  1. When you say "Feature backup in Windows 7" are you referring to the utility of Windows backup program? If so, you can follow the instructions below.

  2. you save data on a CD/DVD, external hard drive or a network drive?

  When you save the data to an external hard drive, have you tried "scenario 2: BitLocker Drive encryption is activated'? '"

  If the problem still persists, try the following:

  Disable UAC (User Account Control) and check if you backup works very well.

  See: How can I change the behavior of user account control by using the slider?

  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-change-the-behavior-of-user-account-control-by-using-the-slider

  Note: You must restart your computer when you enable or disable UAC. Change levels of notification does not require that you restart your computer.

  It will be useful.

  Come back if you have any questions about this question or any problem related to Windows and we will be happy to help you.

• All my .exe files have been removed. as well as system32\rundll32.exe... How can they be retrieved when no file opens and the system restore will not work.

  Original title:. Nothing works.

  All my .exe files have been removed. as well as system32\rundll32.exe... How can they be retrieved when no file opens and the system restore will not work. I can't install a fixit program or run anything at all.

  Safe mode?

  Looks like you have a virus/trojan/worm infection pretty good...

  Actually, even if you get executables run again - you can be (read as "will be") better off the coast of a new facility.  Wipe and install media with your product key and other serial numbers and installation for other products media you own and restore your last recognized reliable backup for your files.

• I have windows vista and I'm trying to uninstall the hewett Packard software of the printer I bought a printer problem and it does not work because the HP keeps popping up

  Who can relate to Windows

  I bought a Hewett Packard printer and it did not work properly so I bact to the store and exchange it for a printer problem.

  but before he took back the HP printer I do not uninstall the HP with the HP CD software. After installing the software problem I now the HP conflicking with the software of brothers. then when I want to print something the printer HP appears. My question is I tried to uninstall the program from HP and it does not work. I call the Hewett Parkard Tech. and no help there either. So please give me a direction step by step on how to uninstall the software Hewett Parkrad.

  Leon

  See if it helps:

  Three ways to uninstall and reinstall the software of printer/Scanner Hewlett - Packard
  http://www.out-of-warranty.com/three-ways-to-uninstall-and-reinstall-HP/

• When I had the previous version of bit torrent, I had no problem at all, I downloaded the latest version of 721 and it has not worked since what can be done to get it working?

  When I had the previous version of bit torrent, I had no problem at all, I downloaded the latest version of 721 and it has not worked since what can be done to get it working?

  I just downloaded and installed IT - no problem.

  Make sure that the firewall is not trying to block it.