Problem not connected to WIFI when put on

computer satellite 355-s7905, Atheros AR5007EG - pilot 7.6.1.x, Vista Home basic, Belkin F5D6231-4 router - 802. 11B, Norton Antivirus.

When I turn on the computer, the WLAN icon shows connected with limited access (no connection!). Windows says my device WIFI does not work properly. I have check the driver and it is up-to-date.

To connect, I have to go to control panel, disable then enable the driver. Once he got connected, it stays until I restart or shutdown. But when I turn on again, the same problem occurred with computer. Again, to connect, I must manually recycle Devil/activate the driver.
No one knows what may cause this problem? Is anyway to fix this? Help, please. Thank you.
Yours

Have you tried the previous version of the Atheros driver on your PC?

In addition, it is useful to check your configuration wireless Belkin router:

Offshore, i.e. the SSID hidden? What is the interval of tag?

The other thing to try is to change your channel wireless in the Belkin router (your PC adapter should pick up after changing anyway). If there is another source of signal, it can interfere with your wireless network. You can check this using the utility of ' Search for Wireless Device "of Toshiba ConfigFree.

Tags: Toshiba

Similar Questions

  • Windows 7 laptop does not connect to Wifi when the WPA2 security is Active

    I have a rather unusual problem that my Compaq CQ56 laptop not not connect to my router, ASUS RT-AC56U Wi - Fi when WPA 2 security is active on the router. With WPA2 is off, it connects without a problem. But, when I turn it on WPA2 on it will not connect. This problem persists even if I change the WPA2 authentication code. All other devices at home are able to connect with the wifi with WPA2 enbabled router, and this particular laptop was able to do so until very recently.

    Just to make sure that the adapter in the Compaq works, I just went to Starbucks and it connected to their wifi unsecured without problem.

    I was using a TP-Link Wireless Range extender on the home network, but it was deleted.

    I ran the network troubleshooting and Fix - It nothing works.

    I suspect that for my home network installation file was corrupted on this laptop and I would like to know if there is a way to remove, or edit this file and start from scratch. I have a Compaq laptop earlier generation linking problem now. So I'm pretty a connection file corrupted is the problem. Just need to know how to solve this problem.

    Thanks for any help!

    See this tutorial.

    http://www.SevenForums.com/tutorials/120670-wireless-network-remove.html

  • Apple TV 4 is not connect to wifi when return from sleep mode

    When I turn on my Apple TV 4 is not to connect to any wifi NET. If I search for it, it does not appear. However if I take the Apple TV, it is already connected. It's a little bother doing this several times...

    I'm afraid that there are already several discussions on this problem. Search for 'sleep' and 'network' or 'WiFi '. But it doesn't seem to be a solution. It seems to have started with tvOS 9.2, which I assume you have. And it affects all ATV 4, so it's something to do with your ATV settings or the configuration of the network, but I don't know what it is. Please report it to Apple to the https://www.apple.com/feedback/appletv.html . We hope it will be fixed with an update tvOS.

  • Computer laptop Lenovo G500 does not connect to wifi when I travel.

    I've had this problem since day one. A support person of Lenovo managed to connect when I first became aware of the issue, but it would not log the next time I was in a hotel. The support people with the service provider for the hotel wifi could not help me. Drivers have been checked, windows has been updated. Microsoft security essentials antivirus running. At home, I connect to internet through my ethernet cable.  I travel quite often and my laptop is useless, unless a wired connection is available. Help!

    Hi Mario,.

    I imagine the inconvenience that you are experiencing. I appreciate your efforts to resolve the issue. I will certainly help you in this matter.

    This problem can occur if authentication enable IEEE 802. 1 X for this network checkbox is enabled. If this box is checked, but there is no server to authenticate the connection is interrupted. If you turn on the wireless network connection, it disconnects again after a short period. This problem can also occur if Wi - Fi drivers are not updated properly, or due to changes in the network settings.

    Try these methods below and check.

    Method 1: run it Troubleshooting Internet connection problems.

    Try to run the Internet Connection Troubleshooter that can help you solve the problems with the internet connection.

    1. Press the "Windows + C" to activate the menu of charms or move the mouse to the bottom right of the screen and you will get the menu of charms.
    2. Click Search , and then select settings.
    3. Troubleshooting of type and select Troubleshooting.
    4. Click network and Internet , and then select Internet connections.
    5. Click Next to run the troubleshooter.

    If the problem persists, follow method 2.

    Method 2: Disable IEEE 802 authentication. 1 X.

    To disable authentication IEEE 802. 1 X, follow these steps:

    1. Click Start, type ncpa.cpl, and then press ENTER.

    2. Right click on your wireless network connection and then click Properties.

    3. Click the wireless networks tab.

    4. Under preferred networks, click your wireless network, and then click Properties.

    5. Click on the Authentication tab, click to clear the authentication enable IEEE 802. 1 X for this network check box and then click OK twice.

    If the problem persists, use method 3.

    Method 3:

    Follow the steps in the Microsoft help articles below:

    Why can't I connect to the Internet?

    Hope this information is useful. If the problem still persists, please post back for further assistance, we will be happy to help you.

    Thank you

  • Hi I have a problem to connect on wifi I have reset all the setting ang simultaneously press the home buttom ang poewr but not wrking buttom, I can't and on the router because I was on a public area as hotel thank you

    I have 5 16 g model A1428 phone

    FCC ID * A IC * A IMEI; ***

    I TRY TO OPEN MY PHONE TO CHANGE THE BATTREY AND REMOVE THE LCD CABLE TO CHANGE THE POWER ON SWITCH, BUT UP TO THAT ONLY TO REMOVE THE LCD SCREEN, I GAVE ALL MY BECAUSE IS DIFFICULT... WHEN I PUT I CAN NOT CONNECT TO WIFI.

    I TRY to RESET all THE SETTING or RESET or PRESS TOGETHER HOME BUTTOM AND POWER SWITCH ONLY MARKET THE ROUTER NETWORK I can't DO it BECAUSE it OF in CRUISE BOAT or in public space...

    Thank you!

    ALFREDFROMTAGBILARAN

    < personal information under the direction of the host >

    Please do the following and after each test to see if the problem is resolved - if yes, then you can omit the following steps - I tried to list them in ascending order of the effort at least on a Mac and / or an iDevice

    1. Check if the problem is related to a single device and if other devices connect normally-
    2. If the answer 1 is 'yes' - try to connect the device assigned to somewhere else if possible - coffee or the University
    3. Please see recommended settings of WiFi routers and Apple access points
    4. Perform a forced - restart cela do not delete or purge all data and allows to solve many problems - here is how - press and hold the Off / On Home button and at the same time for about 15-20 seconds, until the Apple logo appears. Allow normal startup upward.
    5. Settings - WiFi - < network name > - Click on forget network - do a restart forced 4 and then again add the network
    6. If home - reboot the router by unplugging it for 60 seconds (power) and the plug and reconnect - obviously, this step can be done in a public place like a cafe or airport or University. While you're there - make sure your router is working on the latest firmware (check manufacturer's website)
    7. Settings - general - reset - Reset network settings - remember to have very practical WiFi passwords because it erases the WiFi passwords
    8. If it is a new specific net device in your home - make sure that the router gives enough DNS for all numbers which must / wants a connection - stuff like the printer, Chromecast get overlooked - ask for more details on this so not sure option
    9. Backup the device to iTunes - restore as NEW (no backup) using iTunes - see if solves problem - if yes - restore backup
    10. An appointment of 'Genius' to an Apple Store, or select another authorized service provider.
  • My iPod touch will not connect to WiFi and I followed the steps posted. Also, when he dies he thinks that it is December 31, 1969. What can I do to fix this?

    My iPod touch will not connect to WiFi and I followed the steps posted. Also, when he dies he thinks that it is December 31, 1969. What can I do to fix this?

    Not knowing what the 'followed the steps posted' have been

    The iOS device connects to other networks? If Yes, which tends to indicate a problem with your network.

    The iOS device sees the network?

    Error messages?

    Other devices connect now?

    The iOS device has connected before?

    Try the following to rule out a software problem:

    -Reset the device iOS. Nothing will be lost

    Device iOS Reset: Hold down the On / Off button and the Home button at the same time for to

    ten seconds, until the Apple logo appears.

    -Power off, then back on your router

    . - Reset network settings: settings > general > reset > reset network settings

    - iOS: troubleshooting connections and Wi - Fi networks

    If your iPhone, iPad or iPod touch connects to a Wi - Fi network

    - iOS: recommended for WiFi routers and access points

    -Restore from backup. See:

    iOS: how to save

    -Restore factory settings/new iOS device.

    If still problem and it does not connect to any networks make an appointment at an Apple store Genius Bar because it appears that you have a hardware problem.

    Shop Apple Store - Genius Bar

  • App crashes when it is not connected to wifi

    Our dps application crashes on iphone and ipad (3) not connected to wifi. I expect an error "you are not connected to internet" to appear, and then everything downloaded before problems at work, with the exception of external links. Is this possible?

    Thank you!

    There is a fix for this turn off right after V25.

    Unfortunetly you must rebuild your viewer and to submit and update to Apple. According to my experience, they have very quickly while approving the update because of the essential nature of the update even without putting in an expediated demand treatment, but it was more than a month.

  • Is it possible to have iMessage turned off automatically when the phone detects that it is not connected to wifi?

    My daughter continues to send iMessages when she's out and about (IE. When it is not connected to wifi) and iMessages are sent using its data allocation, and it continues to go over its data allocation. Is it possible to get the phone to turn off the iMessages automatically when it detects that it is not connected to wifi, so that messages are then sent via sms texts, and then it reconnects to iMessage when reconnected to the Wifi? (I know it can be done manually in the settings, but she keeps forgetting to do so).

    Not automatically.

  • Our published application crashes when the user is not connected to WiFi

    It became clear after the last launch edition our published application crashes when the user is not connected to WiFi.

    This is a new one on us, someone at - it ideas?

    There was a bug in all versions of Viewer 24 and earlier that have arisen during the last iOS updated acme outside. If you upgrade to v25 or later version the issue will go away.

    Neil

  • iPod touch will not connect to wifi, I have tried everything!

    I used this touch iPod for over a year, and all of a sudden, it does not connect to wifi. I type the correct password, but he responds with "wrong password". I checked since then with several computers apple and iPod touch on the connection and that's fine. I even had these devices 'forget' the network and reconnect without any problem. I also had new devices to connect to the same wifi signal. I know that's not the router. I reset the network settings, reset the content and settings. I tried to restore then connected to iTunes and told to disable Find My first iPhone, but should not be my apple ID password. When you are connected to iTunes I put the iPod into recovery mode (connector pointing to iTunes screen show) and reset to factory settings and it won't always connect to the wifi. I'm looking for ways to solve this problem all over the internet and I'm out of ideas. The iPod is updated to the current 9.1 iOS. Someone at - it else I can try?

    It connects to other networks?

  • L850 satellite will not connect to Wifi

    Hi, new here.

    I have a Toshiba L850 which does not connect to wifi,
    Many other devices in the House and the L850 was last week.

    You can see my router but will not connect.
    It is the 'limited access' connection, but not more.
    Said troubleshooting couldn't identify the problem.

    When I try and access the Device Manager, I get a "Explorer.EXE" the specified service does not exist as an installed service?

    Help.

    Paul.

    > He sees my router but will not connect.

    I guess that your router is secured by encryption (WEP or WPA / WPA2)
    Test WiFi connection without the use of WLan encryption settings.
    Turn off in the router settings and test the connectivity.

    Of course you need to do that just for test purposes because it s not advised to use the unsecured WiFi.

    Where you have no problem to connect the laptop to 'open' WLan, I recommend changing the encryption type.

  • After downloading podcasts, still no message "not connected to wifi.

    It seems that I am successfully downloading podcasts, but sometimes when I try to play them I get a message that says that I am not connected to wifi.  This is inconsistent - sometimes I have the problem and sometimes I did not.  Thank you!!

    You download via wifi directly on the iPod?

    They have three points on the iPod?

  • Satellite Pro L300 will not connect to Wifi after hibernation

    Hello

    can someone there help me please?
    I have a Satellite Pro L300 and it does not connect to Wifi after hibernation.

    The only way to do it is to restart the pc.

    Any suggestions?

    Hello!

    I m using a Satellite L300, which should be similar to yours and I peut t noticed this problem. WiFi works perfectly without any problems.

    In any case, I would recommend updating the driver WLAN and the BIOS. The two you can find on the Toshiba site:
    http://forums.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

    In addition, you run the factory settings or you have installed a different version of Windows?

    Good bye

  • phone will not connect to WiFi

    Hi, my phone is not connecting to WiFi
    It was fine to start with and now it does not work. I tested my WiFi with others and they all get the signal and excellent connectivity.
    My z2 is either stuck in step "obtaining the IP address" or telling me he avoided a bad connection, despite the fact that I have this option disabled.
    I tried turning everything market, I tried forgetting the network and reconnect. I tried to unplug my swr10 smartband I read another post suggested that it caused problems.
    Nothing works. It will be not just to connect to my WiFi at home.
    I read a post suggesting the firmware requires a downgrade but I'm not technical interest and I'm afraid to try because it is a new phone and I don't want to void the warranty.
    Someone at - it ideas?

    I think that I have solved it without going through the firmware downgrade. I went to advanced, disabled wifi wifi optimization. Then he returned, and then rebooted the phone. WiFi has been the connection perfectly for this, but as I do not understand the phones I can't offer an explanation as to why! It has been working well for 3 days now. I'll keep it under control, but it is worth a try for someone else in the same situation. I also have a colleague with a z1 which must have WiFi optimization disabled permanently to run WiFi, once again, don't know why but yet once worth a try.

  • Printer will not connect via WIFI

    I'm continually offered an update for my CANON MG3250 printer, I've now had 8 in the past two months, and all were successful. Now my printer doesn't work! that is, it does not connect via WIFI, but will work on cable? All ideas/solutions please.

    Hello Nigel,

    Thank you for your response.

    I'm sorry for the late reply.

    I appreciate your time.

    I suggest you to refer to this article and check.
    Reference:
    Solve printer problems
    http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-8&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1

    Please keep us updated.

    Thank you

Maybe you are looking for

  • I lost a password for the e-mail account. How to retrieve it?

    Like what is said. I lost the password to one of my email accounts. I don't know that it is stored somewhere in the T-bird. All I need to know is how to get to the top.

  • Compactheader add-on no longer works with Firefox 39?

    In my view the header that appears above the body of the email must be eliminated. That is possible because the Compactheader add-on is no longer compatible with Firefox 39. This header is redundant and just takes place of the screen anyway.

  • How much memory can I use?

    Hello I have an inspiron 530 with 4 GB of memory. Can I add more memory?  If so What should I ask for when shopping for memory? Thank you Teleam

  • installation of the latest version of windows vista and pc crashes

    I received an alert that there were new updates and install. Unfortunately for me, when I installed windows vista update, upgrade or whatever it is, it crashed my computer and now all I have is a blue screen and my computer tells me that my computer

  • RIM Push at all

    Is it possible to make a push to RIM for all devices on a given area of Blackberry? Or maybe a group? If I get anything apart from an email or PIN code I get a 403 http error back.