Problem NVIDIA - continues to change my resolution after about a week of use

NVIDIA changes the settings to 1680 X 1050 to 800 X 600. Can I change it to 1680 X 1050. He will be there for about 1 week and then repeat that unwanted changes could YOU please RESPOND to MY NEW e-mail ADDRESS;  Thank you

E-mail address is removed from the privacy *.


1 are you aware of recent hardware or software changes made to your computer before this problem?

Click on start it > type device manager in the start search box > expand graphic cards. For the most recent driver, see your graphics card on the website of the manufacturer of the computer.

Download Driver link for NVIDIA:

Tags: Windows

Similar Questions

  • Image fails after about 1 week to install

    We have a problem where our Windows 8.1 image not settled after about 1 week.  We can cut out an image with ImageAssist and it works fine.  We install and test it on several models with no problems.  After about 1 week it start to fail with a blue screen, screens black, or is totally insensitive after the image is applied and the system is restarted.


    We are able to create a stable image that lasts longer than a week, but we don't know why some work and others fail.  It's very frustrating and adds an additional week to our process which we do not like.

    Someone has seen this before, or someone has a solution?

    Image office
    Windows 8.1 fully patched
    VMware Workstation 11 & 12
    UEFI enabled for the virtual computer
    Reference Dell 9020
    Dual SSD in RAID 0
    32 GB OF RAM
    Reference Dell Image Assist (we used previous versions of the same question)

    KentImager - thank you very much for the information.

    We saw only one instance reported of the symptom that you are experiencing.  It is resolved by the resolution referred to in this message 'restoration of images 64-bit issues'.  If your W8.1 image is 64-bit, and your USB has not created with the /secureboot switch, maybe that's the problem.

    As an aside, in our next version of ImageAssist - the process of creation of USB drive is no longer produced a 32-bit version by default, instead it will automatically create the corresponding version of the operating system detected at the time of production.

    Thank you


  • T400s camera stopped working after about 2 weeks

    Got a new T400s, well worked out of the box.

    After about 2 weeks, do not use the camera (of course, I checked, it works when I install everything first) the camera no longer works.

    He appears in the Manager of devices, but Skype and other software just to see a black image. The LED on the side, which according to me, shines green when the unit is supposed to be consulted running is no longer.

    Installation of the driver and going back in time (recovery point) makes no difference.

    I really want to reformat the drive, there are a ton of my files on it...



    I contacted local support and they wanted me to come and check the camera themselves.

    In preparation, I removed the extra 1 GB of memory (3 GB total) I had installed and tried again just before departing for their labs.

    Guess what, that fixed it for me!

    It seems that this model has serious problems with asymmetric memory facilities. I installed a 2 GB module and some of the other problems plaguing this unit had disappeared too (VT - D causing disruption of the screen and also occasional freezes).

  • Firefox seems resets automatically at default old after about a week. Gmail is not the latest version and when I try to reinstall I get malward. What can I do to f

    I have trouble with Gmail because it does not load in the regular version and I have to use html...
    or the old clumsy screen. It was uninstalled and reinstalled many times problems malware, and it works very well for about a week, then returned to the problem area. I don't know what to do to solve this other than uninstalling and reinstalling. I ran my malware software and it didn't tell anything.
    I'd appreciate any help.

    Maybe your program isn't found, no malware scanner is perfect.

    You can try these free programs to search for malicious software that work with your existing anti-virus software:

    More information can be found in the article troubleshooting Firefox problems caused by malware .

    This solve your problems? Please report to us!

  • Change the resolution after scanning

    How to change the resolution of the document after you have already scanned in PDF file.

    You can use optimization PDF or one of the available corrections before the flight to downsample images. There are a number of options that allow you to that control the quantity subsampling, the type of compression and quality. More information is in the Acrobat help doc.

  • Impossible to change the resolution after a system restore - please help

    This afternoon I had my PC freeze when using iTunes. I tried to restart but got major error messages. I had to use "System Restore" a number of times that to have the machine to restart a version blown upward my wallpaper - no cursor, icons or the ability to use the button start. I finally managed to get back to a point where I still once restored the system but still once stood breathtaking version of the background, however, this time with the slider control. When I right click on customize, it does not open for me to change the resolution.

    Can someone help me? I am desperate because it's in the middle of football records and I urgently need my PC in working condition.

    Fixed. Corrupt graphics card. Downloaded and installed new drivers.

  • Satellite A300-07 - screen resolution continue to change right away after stopping

    My laptop Toshiba Satellite A300-07 has only 9 days. When I put the computer laptop, all loaded all software that comes automatically. In the last 5 days or more, whenever I stop my laptop turned on then again once, settings on the desktop keeps on going up to high resolution.

    I tried to change the display settings, but due to the huge police, I see even the bottom of the page click on apply or Ok, page opens up to what low resolution setting to high. Only and the page will not go up or down - cannot minimize yet to see the bottom click on. For some reason, last night, after I created the system recovery disk, it is back to normal.

    Today, he will not be back to normal at all and can practically use as everything is in hugeeeeee characters.

    I have not downloaded (except for msn and yahoo messengers) any software, but what it comes with it that even when autoloaded.

    Can someone help me how to fix it?


    Update the display driver and the BIOS on the Toshiba site.
    Remove any software and the drivers who might be in conflict with the display, for example Dynadock drivers or similar.
    Back up your data and perform the recovery.

    If it happens again on a new installation of Windows, then its likely to be a hardware problem (the graphics card for example).

  • I have problems of continuous loop trying to start after installing SP3

    I tried to boot into safe mode and other options, but it does not start and it won't start either my drive (says there is a damaged my disk file).

    Any ideas on how to get started so that I can remove SP3?

    PS - very disappointing that there is a lack of support from Microsoft on this subject - unless you pay £46 - it was caused by their update and I think they should fix it for free!


    Please follow the steps below: good luck

    Thank you


    Method 4: Use the Recovery Console

    Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

    322756 ( how to back up and restore the registry in Windows

    If you cannot remove Windows XP SP3 by using one of the previous methods, follow these steps:

    1. Insert the Windows XP CD in the CD drive or in the DVD drive and restart your computer. When you receive the following message appears, press a key to start your computer from the Windows XP CD:

      Press any key to boot from CD

      Note The computer must be configured to boot from the CD or the DVD player drive. For more information on how to configure your computer to start from the CD or the DVD player drive, refer to the documentation that came with your computer or contact the computer manufacturer. Alternatively, you can use a Windows XP boot disk. For more information, see the following article in the Microsoft Knowledge Base:

    305595 ( how to create a boot disk for an NTFS or FAT partition in Windows XP
  • When you receive the Welcome to Setup message, press R to start the Recovery Console.

    Note Several options will be displayed on the screen.

  • Select the correct installation of Windows XP.

    Note You must select a number before you press ENTER, or the computer will restart. Generally speaking, only the 1: C:\Windows is available.

  • If you are prompted to type a password to admin, do. If you do not know the administrator password, press ENTER. (As a general rule, the password is empty.)

    Note Do not continue if you do not have the administrator password.

  • At the command prompt, type cd $ntservicepackuninstall$ \spuninst, and then press ENTER.
  • At the command prompt, type batch spuninst.txt, and then press ENTER.

    Note The Spuninstal.txt file appears. As the file scrolls down, you will see errors and files that are copied. It is a normal behavior.

  • After Windows XP SP3 is removed, type exit and press ENTER.
  • Restart the computer in safe mode. To do this, press F8 when the computer restarts.

    Note After you restart the computer, the computer may stop responding, and you will see a black screen. The mouse works. In this case, restart the computer by turning off the computer, and then turn it back on. The second reboot allows you to open a session.

  • When the computer restarts, Windows Explorer (Explorer.exe) does not run and the icons of Windows and the Start button are unavailable. To resolve this issue, follow these steps:
    1. Press CTRL + ALT + DELETE and then click Task Manager in the Windows security screen.
    2. Click file, and then click new task (run).
    3. In the Open box, type regedit, and then click OK.
    4. Locate and then click the following registry subkey:
    5. In the Details pane, right-click ObjectName, click modify, type LocalSystem in the data value box and then click OK.
    6. Restart the computer
  • Use one of the previous methods to remove Windows XP SP3 from your computer.
  • For more information about how to install and use the Recovery Console, click the number below to view the article in the Microsoft Knowledge Base:

    307654 ( how to install and use the Recovery Console in Windows XP

    If you need assistance on how to install, reinstall, or uninstall Windows, visit the Microsoft Web site at the following address: (
  • 40 Firefox fails to load the pages after about an hour of use

    I have followed all 7 steps and added suggestions to
    but none solves the problem. FF40 works after you restart the computer, then don't load/refresh pages (get the circle anti-clockwise spinning gray or blue rotation circle to the right). Every difficulty that I can find on the pages of Firefox support, I tried, but nothing works - including relocation, etc. Help!

    P.S. If everything OK, I will very happy also click "solved the problem"!

  • BlackBerry 10 Dev Alpha fails to light after only 2 weeks of use

    I worked with the device for a few weeks. About half an hour by adding another token of debugging it lights. Plugged into the charger in the morning and came in the afternoon. Still no light or light screen after now button or by clicking on the button at the top of the unit. Am able to see the unit record system when plugged into PC.

    Another thing to remember (suggested by an admin of this site) is to reset the device by pressing the power button for 15 seconds. In any case, the problem seems to be resolved.

  • Satellite Pro A - DVD no longer work after about 10 min of use

    No matter what program I run a DVD with (VLC, Windows Media Center) it freezes after a maximum of 10 minutes, this program becomes inadmissible.

    (Windows 7)


    I put also t know why this happens, but it would be interesting to know if you could some practical information about your model of laptop.

    You have installed all the drivers for your laptop?
    You have to clean the DVD player using a microfibre cloth?
    Have you updated the BIOS?

  • Desktop graphics continue to change. What causes this? How should I do?

    Remember - this is a public forum so never post private information such as numbers of mail or telephone!

    Ideas: / / / graphic design continue to change, what causes it, how to fix?

    • You have problems with programs
    • Error messages
    • Recent changes to your computer
    • What you have already tried to solve the problem

    Continue to change what?
    Please be specific.

    If it is too large or too small size, try you...

    1. right click on a free space of the office > view > select Classic icons.

    2. set DPI:
    Right-click on a free space of the desktop > customize > column to the left, adjust the size of police (in PPP) > uac prompt > click default scale (96 DPI).

    If this isn't what you mean, please provide details.

    For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

  • Should I use that plugin to change the resolution?


    I want to create a plugin to change the resolution.

    I have to use what plugin?

    Already, I have a program to change the resolution of the bitmap data.

    I want to give the image of the PS program (is not the standard functionality of Photoshop) using the plugin and return a result.

    I can convert the image into bitmap by filter data.

    Is it possible to change the resolution as well?

    And how can I do?

    Or, is it best plugin?

    Thank you.

    If you just want to change the resolution of the current document you need a plugin Automation type.

    Are you want to your plug-in to get called when a user performs the image redimensionnerez order? Your plug-in download current pixels and then return a width/height/resolution changed?

    This is not an option for a type of plug-in.

  • My laptop not feed on I tried all the usual, still don't work then after 3 - 4 weeks it suddenly starts up

    Hi, a few months ago my laptop (Toshiba Satellite L350-235) suddenly turned off. I did all... now the key power key used remove the battery etc, still no joy. So I took it to a repair center who said it might be the motherboard. They said they changed the motherboard, so I got home and once again

    a few hours is the same so I'll back with her and finally, they said there was something that needed to replace the BIOS.
    I'm not technical interested so I do not know however it worked once more in the store but once again after about a week, you stop again then after about three weeks to a month it works once again, now its judgment once more. The laptop doesn't have enough for three years. Any help would be appreciated.

    Hi Junath,

    Because the problem is related to hardware, I suggest you contact Toshiba they would be better equipped to help you about this malfunction of the equipment. You can contact them at the following link:

  • Satellite M100 stops automatically after about 10 min

    Hey there guys :)

    My Toshiba laptop has been powered off abrubptly and lit, it's own lately.

    When I turn on my computer laptop, everything appears fine, if fully charged battery, AC adapter / CC plugged in etc. However, after about 10 minutes of use, it will be just turn off and make some noise "zoip" or similar. Turn the laptop back on right after work, but I find it only remains on for 4 minutes before doing the same thing. Turn again reduces the time it stays on, sometimes not even go beyond the boot sequence.

    However, if I leave it alone for a few hours and come back, he's going to stay for about 10 minutes again, before going through the same process.

    I have a warranty, but I am hesitant to take my laptop because I don't want to lose my files.

    So I hope that someone here has a solution for my problem :)

    Thank you


    Sorry to say, but I think it s a hardware problem. This portable strange behavior seems to be a simple overheating!
    The laptop supports thermal protection to prevent the equipment from damage.
    If the temperature rises to a higher level, that the laptop stops automatically. It is a fact and nothing unusual in this case.

    Especially the fan cleaning helps but sometimes the laptop must be open for a professional cleaning. But beware: I n t recommend opening or removing the case! You lose the warranty!
    Maybe an aspiration would make it.

    Anyway, you said that you will not lose the data on your HARD drive. Well, I wonder why you n t create a backup of data, you can also remove the HARD drive and connect it via external USB controller on the second PC and can save the files to the other HARD drive.
    After this procedure, you must put the HARD drive in the laptop and try to reinstall the operating system.
    If this does not help, I would recommend taking the guarantee.

Maybe you are looking for

  • After the upgrade of Firefox all my favorites icons disappear.

    After release of the next version of Firefox, all my favorites have lost their icons. To restore an icon I have to click this bookmark and load a web pade again. Brings back an icon.But I have so many icons that I can't go just by each of them.I appr

  • problem with button events

    I have 3 events in a loop each event are air-conditioned with change of the value of a button, so we have 3 buttons in totall, now, when I press each button, each event works fine, but when I press them again once I expect to run again but it isn't s

  • write data to a txt file

    Hello. I use visa and serial Protocol in my vi n want to save the data from MCU in labview to txt file format which, in the data record in each row not each tab. I want to just save not given time. Meanwhile, I plot the data in the chart. I search in

  • easy way to transfer user environment settings?

    Is there an easy way to transfer the parameters of development environment? I just installed on another computer and it drives me nuts whenever the function palette is always different, and the grid of block diagram is not on... User parameters are s

  • After you install SP3 on XP Professional, cd-rom disappears from Windows, but it is still in the bios

    The computer is an HP running an Intel Pentium III. The CD is a model Samsung Combo Drive SM-304. There is no problem on SP2.