Problem of camera Chicony after Vista Ultimate upgrade on the Satellite A200 - 1CZ PSAEC

Similar Questions

• Satellite A200: After Vista Ultimate upgrade Chicony webcam does not work

  Hello

  I hope someone can help me. For 3 weeks, I have buy the Toshiba A200 with Windows Vista Home Premium and very good built-in Webcam function. I have no problem.

  Yesterday I did an upgrade to Windows Vista Edition full and now the Webcam does not work.
  Every time when I want to launch the following software message come «Please activate the webcam»

  In the it´s control panel that wrote this function of Doesna´t of hardware because the software isn't fair. But I have the right software. I have try the original software on me the hard drive and, of course, I do a download from Toshiba and I try this.
  But I still got the same message.

  Please help me.

  Hello

  I m not an A200 owner and, therefore, I can not say much about this webcam tool, but to my eyes the Chicony webcam software should work with Windows Vista Ultimate Edition, because this version is almost the same as Windows Vista Home Premium. The ultimate version supports more features like Home Premium, but the software is running and must be compatible with both versions of Vista.

  How did you install Vista Ultimate? You perform a new installation of the OS, or you upgrade only the Home Premium-> Ultimate?

  Anyway, currently version 1.0 of the Chicony camera software is available on the Toshiba page.
  You may need to wait until the new update has been published.

  By the way: also check these threads;
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=23587&MessageID=87055
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=24161&MessageID=88732

  Good bye

• Don't arrive after Vista Ultimate Upgrade Windows Update to download SP1 for Windows Vista

  I have 2 computers were pre-installed with Vista Edition family content and Basic Service Pack 2. Due to a new system of distribution to come in I had to upgrade to Vista Ultimate. I bought the DVD upgrade containing all Service Packs. After removing the Service Pack 2 and Service pack 1 (in that order) Windows Update will not download Service Pack 1

  You have made or has not upgraded Vista Basic to Vista Ultimate computers?

  That said, Windows Update has nothing to do with upgrading a Vista computer.

  Given that these are specific consumer forums, try to publish in the appropriate Vista IT Pro instead-online http://social.technet.microsoft.com/Forums/en/category/windowsvistaitpro forum

• Who installed Vista Ultimate SB to the Satellite M40

  Is there anyone who have Vista Ultimate installed Satellite M40? I have big problems to install Vista. After that I have disabled the PCMCIA is OK. I'm looking for a new update of the BIOS and the Vista drivers.

  Hello

  I m a M40 owner but I did not install Vista on this unit. I use the XP.
  I have not installed Vista on this unit because according the Toshiba document I found in this forum the Toshiba drivers are not available and I n t think that this driver will be available in the next time, or any time for this series of laptop.

  Is the laptop has Vista capable sticker? I don t think so :(

• Built in camera Chicony USB no longer works on laptop Satellite A200

  All of a sudden, the built-in in my laptop Satellite A200 Chicony USB webcam has stopped working - it was going very well about 6 weeks ago, but now it's as if he has actually disappeared from the laptop. The camera does not even on devices such as equipment manager - there is no single category of imaging devices (unless I am also connected to our printer/scanner). It is also not displayed in 'scanners and cameras' folder in the control panel. But the software (Toshiba Camera Assistant software) is still there. Weird.

  When I start the computer first, or at other times try to start the camera, an error message appears that says:
  * "webcam driver open fail. Restart the computer or the camera. "

  Before you tell me to download and reinstall the drivers, let me tell you what I "ve tried so far:"
  1 restart the computer (obviously)
  2 downloaded the driver for my model on this site and variously has tried to repair, replace and finally uninstalled and reinstalled the. IT IS NOT THE DRIVER!
  3 unplugged my wireless USB mouse and restart the computer (I read on another thread that it sometimes interferes with the camera)
  4 tried to get the computer looking for new hardware - he couldn't find it.
  5 tried a system restore, where it was linked to a recent update - I tried this using three different restore points system, and none of them could not be completed.

  Help! necessary technical assistance
  Thank you

  All that you have done is just.

  In all this history it's strange this webcam is not listed in Device Manager.
  In my opinion, you should do a final test to check the operation of the equipment, if you want to install the OS by using recovery DVDs.

  With own factory and OS preinstalled settings, you can check the operation of the equipment and see if the cam will work or not.
  If the problem will be the same I'm almost sure it's related to the faulty webcam.

• Driver Chicony webcam does not work on the Satellite A200-13O

  After the misfortune that occurred to my webcam, I tried to fix it by uninstalling the driver and then put it back in place (by the toshiba Web site).
  I did this twice and it does not work,
  allthought the pc installed the driver, the camera was not working because a file was for win95 and my pc has vista.

  After several reboots, I made the following
  -Start
  -all programs
  -camera assistant software
  -Right click
  -options (the last button in the right click menu...)
  -compatibility
  -Select work in win95 compatibility
  -ok
  Sorry for my English, I am Greek and my menu vista also... :))
  If anyone wants more details please to contact me.
  I hope this could help those in despair...

  Hello

  Yes I would like some details;).

  For example: manufacturer who is the camera, it is built, made, he has worked previously, and so on...

  So there is a lot to say, have you ever said to the second part, but I'm missing a few things as I've described above. By the way: you can try to recover your machine, if you really need on your camera, but it is really the LAST RESORT.

  Good bye
  John

• No sound after question sleep & network on the Satellite A200 - 14 d

  Hello

  again satellite a200 14 d vith Vista Home Premium, and there are two annoying problems:

  1. very often, but not in every time, when I close the lid to put the computer in sleep mode - after I opened (continued) even once, the icon in the status bar shows me, that there is "no audio device" (Red Cross on the speaker) and so the laptop is totally not mute - no possible to sound (except way loud and unexpected "grinding" of the disk hard suprisigly hehe - grrrrr...).
  Sometimes it helps just to close and open the lid, but most of the cases I had to restart the computer.
  Of course, I downloaded the latest driver realtek audio from this site, but does not help.

  2. also very often my network freezes. I currently use the UMTS connection on mobile phone - Bluetooth; He stops just in some sort of work itself; If I click on the shortcut icon 'dial-up' nothing happens, also if I right click on the network in the status bar icon - nothing, and if I go to control panel - network & sharing the computer freezes completely, while I have to turn it off by longpushing the switch.

  Who can help? Thank you!

  Post edited by: momus

  Nobody knows the trouble I've seen...?

• Stop Vista automatically on the Satellite A200-14F (PSAECE)

  System stops - but re - start automatically. Have updated the BIOS, but still no luck. Have tried all the settings on Vista power options.

  For me, it looks a bit like a problem of overheating or a problem of Vista system.

  Let's talk about overheating;

  Usually the laptop stops automatically if the temperature reaches a critical threshold. Then the notebooks overheat protection stops the laptop to prevent material damage.
  Especially, the temperature rises to a higher level because notebooks modules of cooling don't work properly.
  You can try to clean the fans with a professional pneumatic sprayer.
  It s a really useful tool for blowing air even if the railings of cooling and get rid of the dust and debris. These sprays, you can buy a portable computer/computer dealer.

  But this problem could be related to a software problem;
  In this case, I would recommend reinstallation of the operating system with the Toshiba Recovery CD.

  Best regards

• Runtime error Vista Ultimate Upgrade

  I recently bought and downloaded Vista Ultimate Upgrade of the site ultimate steal Microsoft.  I downloaded all three components: X 14 - 63453.exe, install.wim and boot.wim.  I am running Windows XP Media Center edition 2005 with Service Pack 3 installed.  In preparation for the installation of Vista, I did a clean install of XPMC edition.  The Vista Upgrade advisor identified all my compatible material.

  Whenever I run the executable file either by hard drive, dvd or USB hard drive, I get the same error: "the application failed to start because the application configuration is incorrect.  Reinstalling the application may fix this problem. "I don't get an error number in the message window, but I get the following in under the errors to the system event viewer:

  Generate activation context failed for E:\Mike's Files\Burned discs\Vista Ultimate 64 bit Red\X14 - 63453.exe. Reference error message: the operation completed successfully.

  .

  For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.

  At the exact same time stamp, I get:

  Dependent Assembly Microsoft.VC80.CRT could not be found and last error was that the referenced assembly is not installed on your system.

  For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.

  Research leads me to believe that libraries VC ++ are not included with the installer and therefore need to be installed on my system.  In the case of corrent what application do I need to install to get these libraries?  Office 2007?  If this is not the case, correct, any advice on how to get my Vista downloaded to work?

  Mike

  Hi Mike

  Windows XP Media Center Edition is a 32-bit version of Windows.  You receive the error message because you are trying to level to a 64 bit Windows Vista version and is not possible.  There is more information about the installation of Windows Vista x 64 contained in the link below.

  http://support.Microsoft.com/default.aspx/KB/932795/en-us Shane
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Licensing issue? I need to replace the default motherboard with a 'Detail' education Vista Ultimate Upgrade on top of XP "OEM." Can legitimately transfer my license everywhere and how?

  I am currently a computer on which I already installed XP OEM and upgraded to the edition upgrade Vista Ultimate retailers through the ultimate steal Microsoft.

  [Reminder]

  The problem I have is that I've recently updated my graphics card to a card of Nvidia 7300GS card Nvidia GT240 on which my motherboard was properly assessed. However, due to some unfortunate circumstances (I dunno if it's associated graphics or an electrical surge problem, I suspect the latter as the card is fine) my PCI Express slot is fried! This resulted in the motherboard being unable to start any card in the PCI Express slot and gives a series of BIOS beep error codes. I even dug my old graphics (7300GS) and he was still unable to boot. Accordingly, I need to replace the motherboard for the PCI Express slot works if I use a graphics card.

  [Problem]

  Since the license Vista Retail Upgrade that I use currently is the edition of 'detail', can I simply change my motherboard everything and turn it back on, or is it more complex because it is installed on the high XP OEM that is bound to the default motherboard? What are my options?

  I have to buy another XP OEM license and reinstall everything from scratch? What happens if I didn't reinstall and just changed the motherboard and drivers updated my current installation? Is - is this legitimate?

  As I understand it, the Windows for OEM license allows a person replace a motherboard of 'default' (GA-M55plus-S3G in my case) for a replacement under certain conditions, mainly as for everything. Am I entitled to it? If so, what motherboard would be I can replace by although it is considered an upgrade? I have in mind an ASUS M4A78L-M as it is cheap and comes with connectors female jack audio 8 channels on the backplate was on my old motherboard.

  My main confusion is to know what license applies to me because of the upgrade process, retail of Vista or XP OEM? Upgrades medium I improve my driver's license?

  I would like to solve this problem without canceling my licenst but just don't know how?

  Thank you very much for any help or advice.

  Zemian.

  It is not Microsoft.

  These are public forums, hosted by Microsoft.

  You need to set the XP Reinstall 1 > and then perform the upgrade to Vista.

  We cannot tell you what motherboard you can replace it with.

  Here is the Vista Forums.

  You will have no problem using the Vista Upgrade retail > solve your XP problem 1 in the Forums of XP:

  XP forums:

  http://social.answers.Microsoft.com/forums/en-us/category/WindowsXP

  Link above is for XP Forums.

  There is a list of the different Forums XP to the link above to help you.

  You get the help you need there.

  Here is the Vista Forums.

  See you soon

  Mick Murphy - Microsoft partner

• Using Vista Ultimate upgrad DVD on the new machine

  I upgraded my computer which had OEM Vista Home of Windows Vista Ultimate Edition by buying an upgrade DVD, now 'only' computer died and I want to improve my new computer that has Vista Home OEM Vista Ultimate using the same Upgrade DVD. The final result uses the DVD to upgrade on a single computer, because the first died. How can I transfer the liscense to this software Vista Ultimate Upgrade to my new computer?

  Perform the upgrade to Windows Vista Ultimate as you normally and if you are unable to activate over the internet, then select the alternative "activate by phone".

• Reinstalled Vista Ultimate Upgrade disc, how can I do a full version licensed facility?

  I bought a Vista Ultimate upgrade version to upgrade my Vista Home 32-bit system. I wanted to update and it would be so 64 bits that takes care of my system. My HARD drive crashed and I had to reinstall from the Vista Ultimate Upgrade disk that I have. How can I make a legal full version?

  Provide your license key is valid for your upgrade DVD you install twice, once as a clean install and then again an upgrade. What you do is 'redeveloped' Vista Vista"which is a route valid.

  http://www.Vistax64.com/tutorials/68767-clean-install-upgrade-Vista.html

• will vista ultimate upgrade to windows 7 Home premium and back up my files.

  will vista ultimate upgrade to windows 7 Home premium and back up my files.

  Hello

  Loy it won't

  Vista Ultimate upgraded to Windows 7 Ultimate edition

  Windows Vista (SP1, SP2)	Upgrading to Windows 7
  Company	Professional, company, full
  Enterprise	Enterprise
  Home Basic	Home Basic, Home Premium, Ultimate
  Home Premium	Home Premium, ultimate edition
  Ultimate	Ultimate

  ____________________________________________________________________

  and read this information, including where is the right Windows 7 Installation Forum for your questions:

  so eager to upgrade to Windows 7, it will depend on if the manufacturer of your computer/laptop has windows 7 drivers available for your computer/laptop as to whether Windows 7 will work properly on your machine

  check with them

  and read this

  Windows 7 upgrade advisor

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=1b544e90-7659-4BD9-9e51-2497c146af15

  Windows 7 system requirements

  http://Windows.Microsoft.com/en-us/Windows7/products/system-requirements

  Windows 7 upgrade paths

  http://TechNet.Microsoft.com/en-us/library/dd772579 (WS.10) .aspx

  Compare editions of Windows 7:

  http://Windows.Microsoft.com/en-us/Windows7/products/compare

  Windows 7 Compatibility Center to check software and hardware compatibility:

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx

  Windows 7 price:

  http://www.microsoftstore.com/store/msstore/en_US/list/CategoryID.50726100

  _____________________________________________________________

  and the link below is to an instance of installation of Windows 7 for any other questions about the installation of Windows 7

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_install?page=1&tab=all

• After Vista update cannot find the external hard drive, AutoPlay does not work, and new unusable disk appears under my computer

  After Vista update cannot find the external hard drive, AutoPlay does not work, and new unusable disk appears under my computer. Also I can't 'manage' my computer because I do not have "permissions". I tried a fix he 45071 and it did nothing.

  Applications, (Norton and McAfee) (including free evaluation versions are notorious for not not upgrade (or uninstalling) itself.) If NIS has been installed for 3 years, you have NIS update at least once and maybe twice (e.g., NIS 2009 > NIS 2010 > NIS 2011).

  [You may want to print these instructions for reference offline. If a step said to reboot, reboot.]

  1. download the Norton Removal Tool, save it to your desktop: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  2. close all open applications (that is, anything with an icon on the taskbar).

  3. After completing some you have a copy of your handy product key, uninstall all Norton software (including LiveUpdate and everything Norton Add ons) viaControl Panel | Programs | Uninstall a program (or Control Panel |) Programs and features, if you are using the classic view).

  4 IMPORTANT! -Online activate Windows Firewall immediately after the restart.

  NB: Now you're "working without a net": no to ANYTHING else online (e.g., navigation, reading e-mail, chat) until you have completed step #7 below!

  5. right click on the file that you saved in step #1 above, and then select run as administrator.  DO TAP not your keyboard until the race ends, then restart.

  6. do a clean install of NIS 2011 (using your product ID, if need be) & reboot. CF. http://www.symantec.com/norton/support/kb/web_view.jsp?wv_type=public_web&docurl=20080514162318EN

  NOTE: Do NOT activate or install additional modules of Norton (for example, Norton Anti-Phishing) immediately.

  7. manually and repeatedly run LiveUpdate (Norton) until you get a prompt "no update more".

  8. open Internet Explorer (only) to http://support.microsoft.com/kb/923737 & run the difficulty.

  9. open Internet Explorer (only) to http://support.microsoft.com/kb/971058 & run that set it by DEFAULT and modes and AGGRESSIVE. [1]

  10. restart once again & test.

  NB: Installation KB971029 disables AutoRun/autoplay on USB connected but not 'brilliant media' external drives (i.e., CDs & DVDs). See http://blogs.technet.com/b/msrc/archive/2011/02/08/deeper-insight-into-the-security-advisory-967940-update.aspx

  ~~~~~~~~~~~~~~~~~~~~~~~~
  [1] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not list the updates installed in Add/Remove Programs (Windows XP) or installed updates.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Satellite A200 - 10W PSAECE - BIOS need for Vista 64-bit

  Hello

  I'm having problems trying to update my BIOS under Vista 64-bit of the system. The plashnt.sys driver generates an error when loading.
  On the update of the BIOS page I can't find no 64-bit BIOS update for my laptop Satellite A200-10W (PSAECE). Also I've seen most of the computers portable ETA is updates of BIOS of 2009 and my update to the newest BIOS comes from 2007 (version 1.80 for Windows Vista)!

  The reason why I'm trying to update my BIOS:
  I have recently installed 4 GB of RAM on my laptop, the screen of the BIOS reports 4 GB but during POST, there are only 3! Vista reports also only 3 GB of physical memory total. I ran a series of landmarks and notes I got using 4 GB are well below the marks using only 2.
  Memory modules have been tested on another laptop and none of these problems has occurred (another laptop of the manufacturer).

  So I really need a sollution to update my BIOS and prefferably a BIOS update of 2009 available for download.

  On the other hand, I was looking for specifications of my laptop on the Toshiba site and I couldn't find my model on the current models, or models discotinued page. In 2007, when I bought the laptop, it was listed as new on the current page of models, so I expect at least to see it in the abandoned list.

  Thank you for your time!

  > 1. Why there is no updated BIOS newer than that of 2007 and
  There is no update of the most recent BIOS as Toshiba didn t release new updates.
  Why? Who knows maybe a new update is not necessary.

  > . Why my laptop is not listed in the discontinuous model (Satellite a200 - 10w psaece)
  Why should it be included as a discontinued model? The A200 series is not very old... so I n t think that this series could be abandoned