problem of driver installation wireless network for computer notebook dv7-6c20us
I installed Windows 7 Professional but do not have a set of drivers for the computer. I can't get the wireless NETWORK card driver to install. I downloaded the drivers from the HP site and they will not properly install on the computer. I do not know the manufacturer of the wireless hardware, so I can't go to the appropriate site. I tried to use HP scan tool, but it will run on the computer. Chrome, the button does not even operate. In Internet Explorer, the scann button depresses but nothing happens. Help! Thank you!
Hello:
No wonder you had difficulties to find the wireless driver.
According to the list of parts for your laptop, it comes with the adapter PCIe half minicards (HMC) WiFi Realtek 8188GN.
The driver for this model of card is not on the page support and driver for your model.
Here is the link to the driver for this card.
Tags: Notebooks
Similar Questions
-
Problem installing disktop 800 wireless drivers for windows xp
Problem installing disktop 800 wireless drivers for windows xp
Hi Samir,
I see that you are unable to install the drivers disktop 800 wireless. I'll help you with this problem.
1. What is the brand and model of the computer?
2. what security software is installed on the computer?
3. have you made changes on the computer recently?
4. What is the error you get when trying to install the driver?
Please provide us with more information to continue troubleshooting as a result.
See the link on how to ask questions or help on the Forums.
Suggestions for a question on help forums: http://support.microsoft.com/kb/555375
Refer.
Wireless and wired network problems: http://windows.microsoft.com/en-US/windows/network-connection-problem-help#network-problems=windows-xp&v1h=win8tab1&v2h=win7tab1&v3h=winvistatab1&v4h=winxptab1
Let us know if you need assistance with any windows problem. We will be happy to help you.
-
I use a computer laptop gateway t-series and have problems with driver installation
Original title: driver installation problems
I was running a computer laptop gateway t-series that has windows vista installed. I uninstalled vista and installed xp pro on a disc borrowed from a friend.i did not know at the time where the drivers must be installed separately. Not only that, reinstall drive was from dell. my friend has a dell computer. the xp installation went well but I don't know how to proceed with the installation of the required drivers. you have any suggestions on what I can do?
Hi Speete66,
· What is the exact model of the laptop?
Visit this link to download the drivers for Gateway Laptop:
http://support.gateway.com/support/drivers/ddaStepMain.asp
You can also see the following article in the Microsoft Knowledge Base for more information about hardware device drivers:
How to manage devices in Windows XP
http://support.Microsoft.com/kb/283658
Information about the hardware devices for Windows XP drivers
http://support.Microsoft.com/kb/319908
Let us know if this information useful.
-
USB wireless adapter for computer laptop problem
Hello:
The HP laptop with XP get "Low" signal every time I'm in the other room that is not too much longer off the router, about 60 to 70 feet away from him. Then, yesterday, I got USB Netgear adapter in the hope of trying to get more signal. Because, says a guy in the store of the computer installation USB adapter is 'boost' to get decent and more signals.
When I installed the Netgear adapter for the laptop, there is no signal at all and to appear the following message appears in the middle of the screen.
NETGEAR 111v3 Smart Wizard, WEP Passphrase to create WG and the key manually
My question is;
How to install the USB Netgear adapter for laptop?
Thank you for your help in advance.
Hello
The general idea that a USB adapter is a bit a booster dose is false. I'm not sure that you will get the USB Ant thing you don't get the laptop.
According to the physical environment, 60 to 70 domestic feet with walls is probably beyond the capacity of the wireless router.
As for your specific question, it seems that USB is correctly installed but must adjust its password security to your current wireless network.
In general.
My wireless is not working - http://www.ezlan.net/wireless.html
Basic wireless configuration - http://www.ezlan.net/Wireless_Config.html
Wireless Security - http://www.ezlan.net/Wireless_Security.html
Extending remote - http://www.ezlan.net/Distance.html
Jack-MVP Windows Networking. WWW.EZLAN.NET
-
Problem of local wireless network for Sat M30
My wireless will not connect to any wireless network, it may pick up networks but connects only as limited connectivity or not. However, I can connect through ethernet. Are there any settings that I need to check or do I have a hardware problem?
Hi guys
I wonder why you don't check other reviews here in forum wireless.
There are several tips on the very similar question.I went through recent postings here in this area and found this very nice link to the useful site which describes the many interesting and useful for your problem of wireless connectivity.
http://SearchNetworking.TechTarget.com/originalContent/0, 289142, sid7_gci945257, 00.html
-
Problems with the installation of updates for Windows Vista security: error 80070490
Having problems to install updates of security for Windows Vista (5 pieces) for months. Error code is 80070490. I have a lot of disk space and tried to repeat the time where there are no installation. I use wireless which is a power connection (seems to be the specific network), but connect to the internet using the cable has not solved the problem either. Help, please. Thanks for your time.
Hi AndraP,
Since these are updates important, even if you hide updates, you may need to install the update at some point.
You can try to perform a clean boot and try to install the stand-alone package containing the updates.
Step 1:
You can perform a clean boot state.
A clean boot to check if startup item or services to third-party application is causing this issue.
You can read the following article to put the computer in a clean boot:
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
Note: Make sure that you put the computer to a Normal startup once you are finished with the installation of the update.
Step 2:
Once you have placed the clean boot the computer, try to install the stand-alone package of updates from the links provided depending on the version of Windows that you are using:
KB2378111 for 32 bit - setting of security update for Windows Vista (KB2378111)
KB2378111for 64 bit - update security for Windows Vista for x 64-based systems (KB2378111)
KB967723 for 32 bit - setting of security update for Windows Vista (KB967723)
KB967723 for 64 bit - update security for Windows Vista for x 64-based systems (KB967723)
KB2345886 for 32 bit: Update for Windows Vista (KB2345886)
KB2345886 for 64-bit: Update for Windows Vista for x 64-based systems (KB2345886)
KB970430 for 32 bit: Update for Windows Vista (KB970430)
KB970430 for 64-bit: Update for Windows Vista for x 64-based systems (KB970430)
KB972145 BOF 32-bit: Update for Windows Vista (KB972145)
KB972145 BOF 64-bit: Update for Windows Vista for x 64-based systems (KB972145)
-
problem with printing on wireless network
Hello. I have a HP psc 2410 all-in-one printer.
I recently bought a modem router that has a function called "print server" and I decided to use this feature and print via wifi. I put it to the top, but with a problem. When I print something, for example, test page, instead of printing a page, it will print 'test page' on 3 pages (something like partial pages and the last = third page is printed without understanding) and then it freezes (the printer display says 'printing' and I have to cancel the job, otherwise it crashes and I have to reconnect it). I have this problem, not only in the test page but at least IE, office, PDF files. This concerns mainly the Wifi, since if I connect the printer directly to the PC or laptop via usb, it works quite well. also I tried printing with different laptops with wifi but no go. Here is more information that I have forget:
(1) router is WPA - PSK encryption type.
(2) there is no mac filtering or hide SSID passes.
(3) a laptop and an iPad is connected to the router via wifi and a PC which is connected by a LAN cable.
(4) the IP address of the printer, this is the same as the IP for the router settings page. (192.168.0.1)
(5) I can't open the printer's internal web page by entering the IP address of the printer in the browser, since it is the same as the IP address of the router.
(6) firewall on my computer (windows 7 32-bit) laptop is turned off and I don't use any anti-virus.
(7) I tried PHYSICIAN analysis AND HP Print, but he says that the printer is OK.
Thank you
Leland
EDIT: after studying for hours, I finally managed to get rid of the problem of gel. now, there is just one problem of this partial impression that happens by chance on wifi! I mean, it happens sometimes and sometimes not.
any suggestions? I would really appreciate it
The background is that this printer has no way to connect more than a straight USB connection. In order to make wireless you have a device that will give him a network IP address. The printer itself is unable to do this.
The only way to get this printer on a network is to buy a SEPARATE USB print server. Or, buy a router separate, as I said, that has a USB connection on the back which will have supported printers.
You can not connect as you wish as it stands right now.
However, call your ISP and have them set up IF their gateway device has a USB connection and really can support a printer. That's their problem.
-
So I'm having a very strange problem with my wireless adapter. (surprise, right?) Let me explain just what is happening here: I will use my computer, online, do a lot of things like play games or surf the web. Randomly, for no apparent reason, my wireless adapter disconnects the current network disconnect myself from everything I do. When I check my available wireless networks, I can't see a single network. This has happened to me for a while. When he started it first, I tried many things including the uninstallation of a reinstall of my adapter without success. I have to restart my computer to fix. This happens from time to time and has not stopped since the first occurrence. Originally, if I would try to find a network or uninstall/reinstall, my computer would be soft locking and I would be able to use the windows closed functionality, it would just hang out there indefinitely until I hard loaded. Now its being less skittish and let me do a reset software to fix, but it becomes very annoying. I know this isn't my router because all my roommates can still connect to the network very well, and the router will not prevent me to see many (15-20) wireless networks in the region. If someone can help me even by some light on what is happening, I would be very grateful, because I'm getting very frustrated by that. I reinstalled the map, he pulled for dust, etc. etc. It is not usb and its actions with the system. The Device Manager it says as a 802.11n wireless adapter PCI Express LAN Card, manufactured by LITE-ON TECHNOLOGY CORPORATION. Connected to the 4 PCI bus, device 0, function 0.
Thanks in advance:
Justeroo
Try without commitment TCP/IPv6 (which is done by going to network connection > click > properties > it uncheck > OK.)
http://digitalmediaphile.WordPress.com/IPv6-how-to-unbind-from-a-NIC-in-Windows-Vista/
See you soon.
Mick Murphy - Microsoft partner
-
Problems to connect a wireless router to computer
well, I have a windows vista desktop computer. I had remote access to my old House. I recently moved in with my sister and she has an acer laptop and a netgear wireless router. Ive been trying connect my computer to the wireless router, but it won't work. its plugged in the right place and everything and when I try to detect network hardware and settings, it keeps showing up as "windows doesn't detect any wireless network hardware" I do not understand why because its hip sister said she had a disc to install his wireless router but it no longer has the drive. do I need this disk to install the router or what? any help is appreciated, thank you.
Hi keV ann,.
The hardware you need for wireless technology includes the following:
1. wireless network adapter. One for each computer on your network (laptops almost always have these built in).
2. wireless access point or router (recommended).For more information, see setting up a wireless networkNOTE: Laptops have a wireless button; Press the button to turn it on.We also recommend you to check the configuration of the wireless router. Please check the routers manual.Kind regards
Syed
Answers from Microsoft supports the engineer. -
PROBLEM! Cannot view wireless networks!
Hi, I am currently running Win 7 Ultimate 64 bit on my office and cannot view wireless networks!
I tried to use two wireless adapters and both show active although they cannot show all networks.LAN works perfectly well and when I try to add a wireless network, it is said "an unexpected error has occurred."I have updated drivers for two adapters to the correct version wireless and little. No yellow icon in the Device Manager.I also checked to see if power saving has been enabled for the device and power options that are disabled.Two wireless adapters are using a USB port, not PCI. I abandoned everything simply! I need some advice on how to solve this problem! I can provide more information if necessary. But please help me with this problem :(I also disabled anti virus software and my firewall!The wireless adapter, I am using is the:TRENDnet TEW-649UB Wireless USB adapter N speedUPDATE! :
We have some progress I uninstalled all the previous windows updates and can now see wireless networks (such as firewall/AV). The problem I have now is that when I try to connect it said "Windows could not connect. He also says in the settings of cards tab my wireless adapter is "authentication attempt.Hi Tatiana,
· Have you tried to install the drivers from the manufacturer's Web site?
· Have you checked if the network card works on another computer?
Download drivers card network from the manufacturer's website and check manually.
http://www.TRENDnet.com/downloads/list_subcategory.asp?SUBTYPE_ID=1353
Alternatively, you can deal with this problem due to security software. I suggest that disable you the security like anti-virus and firewall software and check if the problem persists.
http://Windows.Microsoft.com/en-in/Windows7/disable-antivirus-software
Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
Call the helpline for the manufacturer of your network adapter. It is likely that neither Windows nor the router have problems, it's just a matter of getting the configuration on both put in place settings to work properly together. The manufacturer of the router will be the best resource to learn how to configure their device.
http://www.TRENDnet.com/support/
For more information, please see the following links:
http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-a-network
http://Windows.Microsoft.com/en-us/Windows7/set-up-a-wireless-router
http://Windows.Microsoft.com/en-us/Windows7/add-a-device-or-computer-to-a-network
http://Windows.Microsoft.com/en-us/Windows7/wireless-networking-frequently-asked-questions
Hope this helps
-
Unable to connect to a wireless network for machine under windows 7.
I have a Lenovo Ideapad U450p with Intel Centrino 2 chipset.
The wireless card is Intel(r) WiFi Link 5100 AGN
Completely updated the driver (in order to solve the problem)
For some reason I can't connect to any wireless network. I don't think it's a problem of router, the router can connect to other devices (there is no MAC filtering). I also tried to connect to the hotspot from my phone.
I can see all available wireless networks, so I think that the scanning function does not work correctly. I just can't connect to one of the networks. I tried to change the password wireless, even tried to disable wireless security.
Thanks in advance!
Hello
Method 1:
Check out the link and follow the steps.
Network connection problems
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problemsMethod 2:
You can also visit this link and follow the steps.
Windows wireless and wired network connection problems
http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-WindowsMethod 3:
Check out the link and follow the steps in section allows you to configure a wireless connection.
Setting up a wireless network
http://Windows.Microsoft.com/en-us/Windows7/setting-up-a-wireless-network -
DeskJet 970 CSE installation on network for Win 7 64 bit system
My deskjet 970Cse is hard, connected to our desktop running Windows XP Pro. I just bought a new laptop running Windows 7 64 bit. I was able to install the printer connecting the USB cable to the laptop without a hitch, however, I can not install it on the network. When I click on add printer, Windows is able to find the printer, but after having tried to connect, it says that it cannot find a driver on the network. When I click OK to locate one manually, it asks me to locate the INF I tried point to the Windows XP INF file that I downloaded on the HP site, but (obviously) it says that it cannot connect to the printer.
I guess if I am able to connect the printer locally this logging on a network must be able to work? No work around to make it work?
Or is my question anything HP pourrait/will be/t ' resolve when it releases so-called Windows 7 drivers?
Follow these steps: on the Windows 7 computer go to file devices and printers, add a local printer, printer, create a new port, port Local, next, \\xpcomputername\dj970 (where you put in the real share of the computer name and printer), OK, Windows Update (and wait for the list to repopulate), HP Deskjet 970, then, then.
-
Problems connecting to the wireless network windows media
After having installed AT & T u verse, the installer said I have to use the code of encryption key for the modem/router to connect to wireless network windows media, so I can watch TV. Windows Media repeat myself that it's the wrong key code. I checked the number again once and he's right. Any help?
Hello
I suggest you to visit these links and check if it helps:
http://Windows.Microsoft.com/en-us/Windows-Vista/watch-TV-in-Windows-Media-Center
It will be useful.
-
Former title: yellow triangle wireless
My computer can connect to the wireless router but cannot connect to the internet. I try to connect with the ethernet with cable modem connection & it still does not work. The other laptop works fine but my does not.
1. I have uninstalled & installed the network card.
2 restart the apater modem & network cable
3. I get 'Windows could not detect a network proxy setting.
4. when I "Network & Sharing Center" and under "show your network activity" I get "identification."
5. "identiyfing netgear" below said 'no Internet' when you are connected to netgear
Windows IP configuration
The host... name: Jeffrey -.
Primary Dns suffix...:
Node... type: hybrid
Active... IP routing: No.
Active... proxy WINS: No.Wireless Network Connection 2 wireless LAN adapter:
State of the media...: Media disconnected
The connection-specific DNS suffix. :
... Description: Microsoft Virtual WiFi Miniport adapt
Physical address.... : 1C-65-9D-BF-E2-BF
DHCP active...: Yes
Autoconfiguration enabled...: YesWireless network connection Wireless LAN adapter:
The connection-specific DNS suffix. :
Description...: Realtek RTL8188CE WLAN 802.11n PCI-E NIC
Physical address.... : 1C-65-9D-BF-E2-BF
DHCP active...: Yes
Autoconfiguration enabled...: Yes
Address IPv6 local link...: fe80::cc8f:f2cd:dd7c:ccd1% 17 (Preferred)
Autoconfiguration IPv4 address. . : 169.254.204.209 (Preferred)
... Subnet mask: 255.255.0.0.
... Default gateway. :
DNS servers: fec0:0:0:ffff:1 1%
FEC0:0:0:FFFF:2 1%
FEC0:0:0:FFFF:3 1%
NetBIOS over TCP/IP...: disabledEthernet connection to the Local network card:
State of the media...: Media disconnected
The connection-specific DNS suffix. :
Description...: Realtek PCIe FE Family Controller
Physical address.... : 1C-75-08-73-8F-F1
DHCP active...: Yes
Autoconfiguration enabled...: YesTunnel adapter isatap. {342574F9-0D0B-4337-B59D-E7373E959066}:
State of the media...: Media disconnected
The connection-specific DNS suffix. :
... Description: Microsoft ISATAP adapter
Physical address.... : 00-00-00-00-00-00-00-E0
DHCP active...: No.
Autoconfiguration enabled...: YesTunnel adapter isatap. {25F2C90C-9E95-491A-BDFC-4F4CDA2FE33D}:
State of the media...: Media disconnected
The connection-specific DNS suffix. :
... Description: Adapter Microsoft ISATAP #2
Physical address.... : 00-00-00-00-00-00-00-E0
DHCP active...: No.
Autoconfiguration enabled...: YesCard tunnel Local Area Connection * 12:
State of the media...: Media disconnected
The connection-specific DNS suffix. :
... Description: Microsoft 6to4 card
Physical address.... : 00-00-00-00-00-00-00-E0
DHCP active...: No.
Autoconfiguration enabled...: YesCard tunnel Teredo Tunneling Pseudo-Interface:
State of the media...: Media disconnected
The connection-specific DNS suffix. :
... Description: Teredo Tunneling Pseudo-Interface
Physical address.... : 00-00-00-00-00-00-00-E0
DHCP active...: No.
Autoconfiguration enabled...: YesHi istraight1,
a few steps, I recommend you to see exactly what this question:
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problemsand finally:
http://social.technet.Microsoft.com/forums/en-us/itprovistaprinting/thread/548ca07e-F04E-4973-8719-8c09959f1ca6hope this helps.
B Eddie -
What wireless network for Time Capsule backups?
Just installed a new Capsule of time at home. The time Capsule is a wireless router, and I can connect all my devices wirelessly to the Network Time capsule wireless. I still 2 other active wireless networks because I use 2 additional wireless routers for access anywhere in the House. All three of my wireless networks are created from the same internet modem. I want to confirm is whether or not my Mac can be connected to one of the 3 networks for automatic backups on the Time Capsule wireless? Or is the Mac must be connected to the network of the time Capsule for automatic backups to time capsule wireless? Thanks in advance for your help.
The same as the TC.
Set the other to extend the network of transport CANADA instead of create a network.
Maybe you are looking for
-
Thunderbird icons appear on the desktop and the taskbar, but not will NOT open
All of a sudden this am when I tried to re - open Thunderbird after previously clicking on 'Leave' none of its icons work to re - open on the desktop or the taskbar. He willnot open all programs or etc. Other forms of e-mail using the same address to
-
Need new ATI Radeon 1400 for Satellite A100 - 788 PSAA9E display driver
Hello I search for new drivers for my ATI radeon mobility 1400 toshiba.com the latest drivers to date is 09/13/07. THX.
-
Den inst and Mettler balance does not not for the Visa print command
Hello, I am working at the interface a S-8001 Instrument in Denver and an analytical balances Mettler Toledo PB5001 in the same .vi. Using the subvi VISA I can get two scales to account for their mass in the .vi, but only if I send them constantly of
-
0 x 80070663 error-failed to install the update after multiple attempts.
For a month, I tried several times to install the NET updates in failure every time. The error code is0x80070663. Any suggestions?
-
SE - X1condenser microphone get distortion while recording the vocal tracks
I recently bought a microphone condenser SE - X 1, I used it to record vocal tracks on hearing of adobe 1.5 through an audio interface, m-audio fast track pro, my problem is that I get a lot of distortion, even when I reduce the input volume, can any