Problem of dual monitor arrangement screenset

Similar Questions

• Discover the problem of dual monitors in Windows 7.

  Hi all

  I have a problem on Windows 7, VMware View on two monitors, I can start a windows 7 Enterprise on two screens (extender mode) but all windows browsers or explorers can be moved easily from one screen to another screen, movement within a single screen is fine.

  However, Windows XP does not meet this problem...

  Anyone have the same problem and how can I solve it?

  My infrastructure: view vSphere vCenter 5.0 5.0 5.0

  Samson

  I've lived the same problem after upgrade to view 5.0 and this is what worked for me:

  http://VMtoday.com/2012/07/lag-when-dragging-a-window-between-monitors-in-VMware-view/

  Adding that the Configuration setting as shown it fixed on my dual monitor configurations.

• Problems with dual monitor: VGA is out only work

  I have a dual monitor card galaxy geforce gf430 who worked on Sunday night before putting the computer to sleep. When I came back Wednesday on the side of the hdmi/vga/dvi vga worked the only possible output. After having checked all the settings and the cables and update of my computer, I had more than one screen. I went out and bought an asus hd 6450 and installed in the hope that I would have my screen. no luck I checked all the settings again and nothing. I ran the program provided with the card and so far nothing. It is not even read a different location for the screen. can someone please?
  Operating system
  MS Windows Vista Home Premium 32 bit SP2
  CENTRAL PROCESSING UNIT
  AMD Phenom X 3 8400 42 ° C
  Tolimán 65nm technology
  RAM
  1.50 GB Dual-Channel DDR2 @ 267 MHz (4-4-4-12)
  Motherboard
  ASUSTek Computer Inc. NARRA3 (Socket AM2) 44 ° c.
  Graphics
  Monitor Non Plug-and-Play generic (1024x768@60Hz)
  ASUS EAH6450 series (ASUStek Computer Inc.) 50 ° C
  Hard drives
  625 GB Western Digital WDC WD64 00AAKS-65A7B SCSI Disk Device (fiber)
  Optical drives
  ATAPI DVD A DH16A3L SCSI CdRom Device
  Audio
  Realtek High Definition Audio

  I took the liberty to do a little research on the ASUS HD 6450 map.  Are - what you got to get the ASUS HD6450 silent and low GPU or the bigger one with the fan?  It might be possible that those silent will not support Eyefinity technology since it was modeled for the home theater PC use.

  I noticed that the model with the fan on the radiator mentions he is compatible Eyefinity, while the silent model does not work, but it allows you to choose between a VGA, DVI or HDMI port, but do not use them simultaneously.

• Problem with dual monitors since upgrade to W7

  I am under W7 Enterprise32 bit with dual display (monitors) - a Lenovo L193pC (primary) and a Dell E177FP (secondary).

  Since the upgrade to W7, I noticed that if I leave my PC unattended and locked for a long time (30 minutes and more), when I get back to him, I lost contact with my main screen: the monitor is on, but the screen is black.  I can only see the secondary display and windows cannot be moved from the second screen to the primary.  All I can do is to sign using the secondary screen, near everything I opened down and restart the PC.

  I use a set of chips Intel G41 Express and a Microsft v6.1.7600.16385 driver for the primary monitor.

  I noticed a few people reporting flickering monitors in a similar situation, but not quite the same thing as what I mean...

  Anyone got any ideas how I can stop what is happening?  Is - this driver related?

  Just to let you know that I solved this now.

  It wasn't a driver issue, it was a computer setting.

  When I put the PC display never sleep and the computer to sleep never it solved the problem.

• Dual monitor problems

  I have been using two monitors (1 monitor my primary monitor, 2 monitor showing an extension of monitor 1) for several years now. All of a sudden, monitor 2 links is no longer. I swapped the connections from the cables to the back of my Tower. When I started my computer, startup began the 2 monitor, but as soon as Windows is fully booted, 1 monitor again became the primary monitor and 2 the screen went black. I guess this isn't a hardware problem.

  After some tinkering on the video card Control Panel, I could get 2 monitor to display, but it is no longer made reference the name of the 2 monitor (Asus) as a monitor. It refers to the second screen as "Digital Display" and considers it a generic Non - PnP monitor. I don't understand how it happened, why it happened or how to get my second screen displays correctly again. Currently, monitor 2 a haywire resolution, and I can't improve it (my own, its because he does not recognize the Asus monitor properly and does not know the capabilities of resolution of it).

  I hope someone can understand my problem and is able to help, because I simply can't understand it.

  Hello

  Sorry for the delay in response.

  Thanks for posting your query to the Microsoft community. If you are always faced with the question, I suggest you to follow the steps and check if it helps.
  First update all the drivers on the manufacturer's Web site. I also suggest you to re - configure multiple monitor configuration and check if it helps.
  Guided Help: Setup dual monitor is easy in Windows 7!

  Additional information:
  Move windows between multiple monitors

  Hope that the information provided has been helpful and let us know if you need assistance in the future. We will be happy to help you.

• Dual monitor - really weird problem.

  I posted this same question awhile back, but now I have more information that my fix this.

  Windows 7pro, 24g of RAM, 2 - dual 1 g cards, two 1 TB drives, PS5 64bits.

  GPU - open GL is on, try off, seems not to matter.

  I tried with Zoom clicked point to Center on and outside.

  I tried Zoom Resizes Windows - on and outside.

  Zoom clicked at the central point, and outside.

  I use three monitors - left - 24 "Samsung, intermediate level - 27 '' Dell and right - 24 '' Dell.

  I started with PS and it opens on the right screen.  All my tools, menus, panels... stay on the right screen and the picture is moved from the right monitor to the central monitor. Before I drag the tab to the Middle monitor I can zoom in and move the photo anywhere I want with the hand tool, which is the upper left corner of the photo can be positioned in the center of the screen.  Once I have move tab (picture) for the monitor environment I can not move the picture that he's stuck horizontally and vertically, I can't get any gray area, if full screen and the photo will not move.  I can navigate in the navigator pane, but I can't move the picture around the screen using the hand tool, I can if left in right monitor.  Now if I move things around, using the central monitor for the tool, panels etc and move the tab to the right monitor it still doesn't move.  If I move the rear tab of the average monitor to the right screen, everything works fine.  It's really odd behavior.  I dragged to the left monitor as well, does not work, only in the original window files was launched in.

  Does anyone else have this problem?  could someone please try this, surely someone has a configuration dual monitor.  Thank you.

  Resemble its full screen in test mode hit the F button a few times.

• Dual monitor problems / external

  I recently bought a netbook NB200/007 and want to use two monitors (mainly for display of pictures etc on larger screens)

  It came preloaded with Windows 7 starter, after having found that the Starter edition did not support dual monitor that I've upgraded to Windows 7 Home Premium, but I'm still not yet to make it work.

  When the external monitor is connected, the netbook picks it up and sets up two monitors, but the external screen does not light (it remains in standby mode) I tried several different resolutions and also tried to use the external monitor as a single screen by selecting the option to have it as my main screen.

  If anyone has a suggestion of how I could get it to work, I would greatly appreciate.

  Kind regards.

  Hi puma325,
  install the 'value added package.
  This will add some features like "Fn + F5" for switching the display...

• Dual monitor problem

  I have a HP Pavilion p6733w-b desktop PC Bundle with 23 "monitor, AMD Phenom II X 2 511 Dual-Core processor and Windows 7 Home Premium, and I tried to connect my vs19 HP 19 inch LCD monitor to make a dual monitor, but each cord I never buy fits in ports at the back of the   HP Pavilion p6733w-b desktop computer . Is there still a rope out for me to do this work. Ive lost money on any cords 3-4

  Your computer has a DVI - D and VGA outputs, monitor HP 2311 x has HDMI, DVI and VGA inputs... and HP vs19 monitor that has a VGA input. The computer bundle should have come with a DVI and a VGA cable... Connect the DVI cable (more great shape of rectangle) of the computer on the monitor 2311 x and the VGA (more small "D" shaped of) cable between the computer and the vs19 monitor. That should be all you need.

  Plug;

  p6733w

  HP 2311 x

  HP vs19

  Frank

• HP 251-a123w: I have a Setup dual monitor using VGA and DVI - D ports?

  I want to connect my HP 22uh monitor to my office using a DVI - D to DVI - D configuration.  Then I would like to complete a Setup dual monitor by connecting an Acer X193w monitor to my office using a VGA VGA configuration.

  Is this possible?  Two ports on my desktop computer can be used at the same time to support dual monitor?

  I see that the cables double monitor are in the form of Y and I thought that maybe a single port may be used simultaneously.  If someone knew this information then it would save some time & money on experimentation...

  Monitor HP 22uh was bundled with my new desktop PC and I cleaned the Acer to my now deceased Vista system.  It is in very good condition, would like to add.

  LSUfan71

  Hello;
  
  Let me welcome you on the HP forums!
  
  I read your post about the use of the video taken two DVI and VGA and wanted to help.

  According to the technical specifications of HP for your PC, both of these jacks can be used at the same time.
  
  Good luck
  
  I'm a volunteer and I do not work for, or represent, HP.
  ========================================================================
  If you feel that my suggestions helped you, please click on the thumbs-up symbol to say thank you!
  
  If they helped to solve your problem, please click 'Accept as Solution' to help others find similar information.

• Graphics card dual monitor will fit in an HP Pavilion Slimline s3600z

  I need to run two monitors to my HP Pavilion Slimline s3600z.

  My OS is Windows Vista 64 bit.

  I'm not a gamer; I teach in virtual classes and need to spread out the screen on two monitors.

  My graphics card is NVIDIA GeForce 9300 GE.

  The card offers the ability to set multiple views, so I bought a splitter.

  Unfortunately, this does solve the problem.

  I bought a low profile with two connections graphics card, but it was too big for the case.

  Is there a card dual monitor low profile that fits the business slimline?

  Here are the specifications of your HP CTO Slimline s3600z desktop. According to specifications, your computer has a power of 160 watts. This power supply is unlikely to fuel a retail graphics card. The simplest method to use two screens with your computer is probably a adapter USB-to-video EVGA + 19.

  Frank

• Dual monitor second dark screen

  I use a Setup dual monitor both monitors same accurate on my pc at the same time on the same exact settings and one of the screens is much darker that the other I tried switching on the cable with no result and have searched the Internet for the past hours searching for answers with no result, any help would be appreciated , I'm completely at a loss I'm 100% sure that it is not a monitor problem

  Hello

  The mother system/card manufacturer and support of the manufacturer of video cards and devices, online
  documentation and drivers and forums would be a good source of help and information.

  These should help:

  Connect the multiple monitor to your PC
  http://Windows.Microsoft.com/en-us/Windows-8/how-connect-multiple-monitors

  Do more with multiple monitors
  http://Windows.Microsoft.com/en-us/Windows-8/multiple-monitors

  I hope this helps.
  --------------------------------------------------------------------------------------------
  Rob Brown - Microsoft MVP<- profile="" -="" windows="" experience :="" bicycle="" -="" mark="" twain="" said="" it="">

• Do I need a dedicated video card to run a Setup dual monitor with HP 700-327c?

  Recently replaced an old HP Desktop with the envy of 700 running Windows 7 Professional.

  Old facility had a Setup to dual monitor with a video card that had two monitors - one HDMI and a DVI connectors.  The standard connectors on the old PC were VGA and DVI, but both have been capped to prevent use.

  I wanted to set up monitors on this new PC to do the same thing and wanted to know if a video card with the two input connectors dedicated was the best set-up or simply use a mute adapter for VGA or DVI on the new PC ports.  The new PC has two video connectors standard - one VGA and one DVI currently.

  FYI: Using an Intel i7-4770 with 16 GB of RAM and a video card using an Intel HD Graphics 4600.

  An update as promised - not a problem - used another cord with the right connector and setting up monitors using Windows device settings and they work perfectly.  No need for a separate or higher video card as I am not in the game application for video features.  Thanks BH.

• How to install dual monitors in Windows XP?

  Original title: I have more xp dell. Two monitors. A video card plus double the original video card. How can I get my TV wired to computer with s-video plug in? Thank you

  I installed the dual video card. I got hooked tv before but unplugged & cannot get hooked again.

  Hi Ben,

  Thanks for posting your question in the Microsoft Community.

  From your problem description, I understand that you cannot configure both monitors. Please let me know if this isn't the problem that you are experiencing.

  Before troubleshooting, I have little information on the issue.

  Did you of recent changes to the computer before this problem?

  Try the methods provided for in article below and then check after each method:

  Setting up dual monitor:

  http://www.Microsoft.com/athome/organization/twomonitors.aspx#fBid=1bZqH23uobu

  If the problem persists, post your reply with results and questions above. We are happy to help you with the advanced troubleshooting steps.

  It will be useful.

• T520 problems with external monitor resolution

  Hello

  I'm standing right now waiting on hold for a Lenovo tech support rep, so I thought I'd just post my problem here. I just bought a Dell ultrasharp monitor U2713HM and am trying to connect it to my Lenovo T520. We sometimes see the monitor and sometimes it isn't, but this isn't my main problem. The monitor is supposed to be 2560 x 1440, but all the resolution settings are grayed out. I know that the Lenovo can support it because my last screen is a Samsung SyncMaster supporting 2560 x 1440, and it was beautiful (beautiful until the monitor exploded).

  I was on the phone with Dell and Lenovo, and so far nobody has been able to solve the problem. I've updated the graphics driver NVIDIA (NVS4200M) to the latest version (310.90) as suggested by Dell, and I changed the cable VGA to DVI - D cable (connected to the Dual Link adapter), as suggested by Lenovo. He stlil does not work.

  I could use some suggestions. I'm not grumpy at all, so it's quite frustrating. Thank you!!

  
  

• HP G42-415DX: in a Setup dual monitor, perhaps armored secondary monitor white screen?

  I have a Setup dual monitor, where the laptop is tied to a 2nd monitor (TV) via HDMI. I mainly use the 2nd monitor. Can I empty the 1st monitor (laptop screen) screen, yet still use the 2nd monitor with lid open to access the keyboard?

  (I noticed with parameters changed in the Panel of Win7, I can close the lid without cutting [sleep, Hibernate or shutdown] computer and had to lower the monitor display 2nd to adapt to the screen.) But to use the keyboard, open the lid of the portable computer, which involved the 1st screen)

  Thank you

  Hi Kalad,

  I think the same as you do sometimes, especially when I watch a movie and you want that it will display on the bigger screen and the simultaneouly have the laptop screen is off.

  As you need to use the keyboard of the laptop and want the second poster only, which suggests to select the "Projector" only option in the pop-up menu by pressing the Fn + F4 key.

  & to come back again having two screens or single screen press Fn Key & F4 on your keyboard and select "Extend" or 'Unplug the projector' options respectively.

  I am an employee of HP.

  Kind regards
  Mundutha

  Make it easier for others to find solutions, marking my answer "Accept as Solution" if it solves your problem.

  Click the "Thumbs up" button to the lower right side of my post to say thank you! ***.