Problem of Extension of RAM with Satellite Pro 6050

Similar Questions

• Code flashing on Satellite Pro 6050

  IA´ve Satellite Pro 6050... 3 years old.
  In December 2005, the laptop got a new Mainboard due to damaged printer port.
  In January 2006, the laptop fell on the floor and worked afterwards is no longer.

  I changed the screen and found a loose capacitor.
  He was missing out on the power supply Board.
  In this way, I changed the power Board (not for 6050, but for 6100) and after that, I get every time a flashing code:

  http://rapidshare.de/files/19142244/blinkin_code.avi.html

  What it means?
  Thank you

  Thorsten

  Hello

  Well, the flashing code means that there is something wrong with the hardware.
  The short means 0 and 1:
  According to your suggestion it is s: 1010 0010
  Note of pleas; You have to read it back. 0100 0101 = 45 h
  http://www.prepressure.com/library/BinHex.htm

  But I put t know what 45 h means.

  Please also consult this forum announcement:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=11450&MessageID=41309#41309

• Satellite Pro 6050 - out port (RCA) TV does not work XP

  I received a Satellite pro 6050 which had Vista installed on it, I downgraded it to XP, but the port RCA no longer works (worked on vista).

  Can anyone suggest a solution?

  Thank you

  Hello

  > I have the display mode to extend the desktop on the second monitor, and I think it sends the output SVGA mailed rather than the TV output
  This could be the key; try to use the FN + F5 keys until you have to spend on TV and not on the external monitor.

  Good bye

• Strange problem with RAM on Satellite Pro A100

  I have a Satellite Pro A100 (not sure which...)
  It came with 2x256mb RAM, which are mounted. I noticed my laptop slow, so I checked what he says on the properties of the workstation - who said RAM 192Mo...

  Any idea what's going on?
  I had a peek inside, both are mounted securely, while the right push entirely? There is a small gap (about 1 / 2mm) so that is the little nick and real editing. -What is the cause? Or it's maybe faulty?

  Please help me!
  Thanks in advance,

  Diana

  According to the description of your problem, I guess one of the memory modules is not recognized by the system and the specified result 192 MB of Ram only tell me that your laptop has shared graphics memory card.

  Satellite Pro A100 is fairly new to laptop and, in my opinion, you should contact service. The guarantee must be valid and if everything is defective it will be replaced free of charge.

  If possible, tell us what Satellite Pro, you have exactly. This info you can find on the lower side of your laptop.

• What RAM is compatible with Satellite Pro P300?

  Hello

  I have the Satellite Pro P300 (PSPC1E - 002002GR).
  What are the specifications of the RAM?

  Currently, there are 2 GB of RAM
  I want 4 or 8 GB of RAM.

  I have this possible?

  Greetings

  You can upgrade the RAM to 4 GB of RAM
  So you can use additional DDR2 667 MHz 2 GB RAM module (i.e. PA3513U-1M2G).

  Specifications are:
  DDR2 SODIMM 667 Mhz PC2-5300
  Pins: SODIMM 200
  Voltage: 1, 8V

• Screen with Satellite Pro R50-B-14U problem

  Hello

  I was just given the Satellite Pro R50-B-14U pc.
  After I upgraded from 7 to 8. 1 and I did the updates Toshiba/windows screen randomly goes off, then on again after a second at intervals of about 1/2 hours.
  I tried to uninstall and reinstall the video drivers, but the problem persists.

  How can I fix it?
  Thank you.

  According to the specifications of the laptop you original Win8.1 DVD facilities, so I assume you are using for the installation of the OS.
  Have you noticed these problems immediately after installing the OS or later after the installation of updates?

• Problem with satellite Pro L300 Ethernet controller

  Hello

  I have a Satellite Pro L300 (PSLB9A - 02L 001). Have'nt after being on the dial for the year last I was wireless (it worked well before that) but am now back on broadband but I don't seem to have any wireless.
  Checked the Device Manager and there is a yellow exclamation next to the ethernet controller and it seems there is no pilot, but apart from that, there is no further details. I tried to update the driver but it cannot find the driver on my computer and it will not search the Internet for this.

  I tried, but none of the drivers I downloaded seems to work...
  At the back of the computer laptop is a sticker - PA3613U-1MPC, I think it's the wifi card that is missing the driver but I can't find a driver for it for the life of me...

  Any help would be wonderful.
  Daryl in New Zealand

  You are right. This part number is WLAN Card. I put t know what operating system you use but for download driver Atheros http://aps2.toshiba-tro.de/wlan/?page=downloads WLAN

  I hope this will help.

  What is now with LAN driver? Do you need it too?
  In any case, visit the Toshiba support page under http://www.mytoshiba.com.au/support/download and there you should find good LAN driver for your model of laptop.

  Send comments.

• With Satellite Pro M-series LCD projector problems

  Hello

  I use a Toshiba Satellite Pro M series for more than a year. I would like an answer to a problem that I've had since I bought my laptop. When I use a LCD (beemer) projector to watch movies on the big screen, he seems to be a problem. When I choose to show my desktop on screen you there is no problem. When I open a video file, divx or just a DVD I can see the movie on the screen of my laptop, but I don't see on the projection screen. It is only black. When I choose the mode full screen, there is always the same prob. Very strange because when I chose the projector as 2nd screen and I slide the film into the second screen, I can see the movie on the projection screen. The only thing that I hate divx and mediaplayers readers when you select full screen on the second screen, the film jumps on the first screen (the one on my laptop). I tried all the codecs and other things. Nothing seems to work.

  Has anyone treats these problems before? Please let me know if anyone knows how to solve this problem.

  Kind regards
  Compton

  Hi refill,

  I thinnk it may be a driver configuration problem, but to solve it, I need to know what mobile phone do you use?

  Satellite Pro M?

  Also would be nice to know what operating system is runing (OS recovery or another image) and what version of driver display that you use!

  Goodbye Chris

• Problems after updating the BIOS on Satellite Pro P200

  I recently buy a Satellite Pro P200 running Windows Vista Business. Yesterday, I updated the BIOS to the version 1.50 supplied with the machine to 1.80 available on the Toshiba site. I double checked that I was using BIOS correct update for the Pro P200 Satellitel running Vista.

  After updating the BIOS, I have now two problems:

  1. whenever I start and join the office, I get an error message "record of Vista has stopped working". This problem has been identified as toshibavistaregistration.exe here: [link: http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=99805]

  2 Control Panel > system now shows the processor and the memory (RAM) as "not available". Execution of the diagnostic PC Toshoba tool and looking at basic information show also no information on the memory (RAM) Although the processor information here. There may be pieces others missing too under the eyes of list shorter than before the update of the BIOS.

  Basically, I want to get everything working again as it should, but cannot find any information on these issues.

  After further review, it appears that the update of the BIOS is not the cause of the problems.

  Immediately after updating the BIOS, I had a major system crash. It turns out that this is what has caused problems.

  After a system restore to a point before the update of the BIOS and the major system crash, now everything is working again with BIOS version 1.8 in place.

• New RAM for Satellite Pro A60

  Hi guys, I got a Toshiba Satellite Pro A60 for about a year now and am lloking to buy little RAM for that I met two links that seem similar, but have different prices. The first link is www.dabs.com and it is "Crucial 1 GB 200pin SODIMM PC2700 DDRRAM without parity"

  The link to it is
  http://www.dabs.com/ProductView.aspx?quicklinx=31BB&SearchType=1&searc hTerms = DDR + PC2700 & PageMode = 3 & SearchKey = All & SearchM ode = All & keys = 50090, 4294957152, 40387

  He has on the actual key that it is an essential product and this second link is crucial.com/uk and seems to be the same thing but different prices
  http://www.crucial.com/UK/store/MPartspecs.asp?mtbpoid=8AB46FD7A5CA7304&WSMD=SATEL lite + Pro + series A60 & WSPN plus CT419262

  Basically, I was wondering if someone could help me telling me if these two are compatible with my laptop, or are the same as the other and which recommend you for me. And sorry if it is too much but can anyone give me any help on installation of the RAM chip? It is difficult to do at all?

  Thank you very much if you can help me out in any way possible.

  Hello

  The original RAM module apart from the number PA3313U-1M1G (1024 MB PC2700). It is always recommended to use tested and original pieces, as many users have a problem after the purchase of the module to different inexpensively.

  In my opinion, you can buy cheaper and test. If there is no problem you can return.

  Good bye

• Upgrade of RAM for Satellite Pro 3400

  Hello

  I own a laptop Satellite Pro 3410, it has pentium celeron 600, 64 MB of ram and 13 '' dstn display. I want to upgrade my ram, somewhere, I read that it can be improved with 256 MB, so that there then 320Mo. My question is now, what I have to use 2 pieces of 128 MB of ram or can I use 1 piece of 256 MB of ram. The point is a friend gave me a 256MB ram for PC laptop (pc-100) toshiba, I put it and it seems to work (win2k showed me the 320Mo compleet), but can it be problems, using this a big RAM?

  I hope you can help

  Katja

  Hello

  I think you mean a Satellite Pro 4310?

  Normally it only uses the modules of memory up to 128 MB. But if your laptop is running with this 256 MB module, there should be no problem.

  Good bye

• HYB39S256800T-8A module works with Satellite Pro 4300

  I can buy this SODIMM Infineon HYB39S256800T-8A, and I heard that they only work with Toshiba laptops.

  They have been tested with Tecra 9000 and no problem, and with no computers Toshiba there are any errors.

  I have Satellite Pro 4300, they will work with it?

  Maybe someone a piece of support for a Toshiba for this memory.
  I asked Infineon, that they do not have the specifications for answering my question.

  Thanks for any help.
  Winyl

  You will be very happy if someone has the same laptop model and quite the same module of RAM. Buy and test it with your laptop. If it won't work not return. End of the story.

  The person who wants to sell you this RAM should be able to give a list of compatible laptop models. In any case, I recommend you to use compatible Toshiba or RAM Kingston modules. Both are tested and you'll get a high quality product.

• How to upgrade RAM for Satellite Pro 4300 Series

  Hello
  I own toshiba satellite pro 4300. He now has 128 MB of RAM.
  As it becomes very slow, I want to improve it with additional 128 MB.
  The problem is, I'm not an expert in this stuff and don't know how to do it. I have a friend gave me the extra RAM, but as I have lost the user manual, I don't know exactly how to do the upgrade.
  I will be grateful if someone can help me. Please consider me as a "dummy" in the explanation. :-(
  Thanx

  Ognian

  Hello

  As Lucky said already support memory Expansion can be found in the lower corner of your laptop and it is fixed with two screws. I hope you have the module that is compatible with this unit.

  I found the info that Ram module with the PA3005U part number is good.

  Good bye

• Upgrading RAM on Satellite Pro A100-840

  The specification for the Satellite Pro A100 840 said that memory has a maximum of 4 GB of memory. But it does not seem to be all provided by Toshiba that allows me to level to 4 GB of memory. This current has the default 1gn that was shipped when ordered. Anyone know how to get the 1 GB to 4 GB?

  Thank you in advance for any help

  Hello

  I just wanted to check the specifications of the laptop but I was not able to find the Satellite Pro A100-840. Can you please check laptop model and send us the laptop model number.

  In any case I really don't understand what your problem. It seems that your model of laptop can handle with 4 GB RAM max. According to your assignment, your laptop comes with 1 GB of RAM.

  So if you want to use the maximum RAM on your laptop satellite, you must buy RAM 2 X 2 GB module. As far as I know, 2 GB RAM module are available and if you want to be sure of compatibility please check the Kingston products.

  Please check this Kingston Memory Configurator

• Upgrading RAM on Satellite Pro M30

  Hi colleagues!

  My comp is Satellite Pro M30-873. He has only 512 MB of main memory.
  I want to spend 1 to 2 GB. Recommended memory is Kingston KTT3311
  which is extremely difficult to buy. A very similar memory of Kingston is KVR333X64SC25.

  It is fully compatible with M30? Anyone tried?

  Thaks a lot in advance

  Hello

  Your laptop can be upgraded up to 2 GB of RAM and compatible 1 GB of RAM except the number PA3313U-1M1G. Use this number for Google search.
  I hope you find somewhere. This module may not be more expensive so I recommend buying 2 of them and the upgrade of RAM maximum.