Problem of its satellite A80 129

I bought the laptop Satellite A80-129 a few days ago. I decided to install Win XP Prof instead of Win XP Home, which came with the laptop. After installing all kinds of software, I noticed something weird. His knowledge was quite low.

I checked all kinds of possible parameters of volume everywhere and it is set to max everywhere possible. Also, I checked the volume on the laptop dial and it is also turned to MAX I installed WM Player 10, RealPlayer, Quicktime and Winamp 5.08.

After playing some of my music, I came across something interesting. While I was playing my music in Winamp, I also played a small video file in WM Player 10 and that's sound was really loud. Immediately I looked at which audio codec is used in this video and this is WMA 9 (64 kbit/s, 48 kHz stereo, (A / V) 1-pass CBR). When I stop the playback of this video, sound volume decreases again.

I also tried sound in other software such as RealPlayer and Quicktime, and only after I read this audio video gets really strong in all players. Any suggestions?

I would point out also that no matter if I play music (mp3, wav, audio CD..) or video (avi, mpeg, rm,...), audio is still low. Only after that I have play this specific video, the sound becomes strong to all players, playing music or video.

I also have problems with energy saver. If I install it, everything I write in the world is so slow, it appears letter-by-letter although I already wrote the entire sentence. If I uninstall, then everything is back to normal. Why is this happening?

I would really appreciate a response.

Best regards, Kekec

Hi Kekec

It's very strange because that all tools & utilities should work fine using Windows XP Home and Professional. Have you had all of these problems at the beginning with OS preinstalled by Toshiba? The original operating system provided by Toshiba included SP2. Have you installed it too?

Tags: Toshiba

Similar Questions

  • Module Bluetooth for Satellite A80 129

    Hi all!

    Is it possible to upgrade my satellite A80-129 with a BT module or it is not possible at all?

    And if possible, what then is the right one for my laptop?

    BR, Kekec

    Hi kekec

    I found information that Bluetooth for A80 is not available. This means that there is no possibility of upgrade. In this case, the best advice is USB Bluetooth stick.

  • Where can I find repair for Satellite A80 129?

    I want to find the service manual for the model satellite a80 129 because my screen is a little loosy.

    Hello

    In general, manual service Toshiba is not available for end users. Maybe you can find help on the net, but if you n t with experience, it will be best to contact a qualified staff in some laptop repair center.

  • Satellite A80 129 No. wirless and Bluetooth internet

    Hi guys,.

    I have a laptop Toshiba I formatted yesterday is Satellite A80-129.
    After some googling I found the way to get the drivers for it, but those driver links two do not seem to work.

    Bluetooth stack
    Toshiba OS independent NA World Wide
    http://Support1.toshiba-tro.de/Tedd-files2/0/bltstk-20070724121132.html
    Wireless Lan driver
    Intel Windows XP s/o world wide
    http://Support1.toshiba-tro.de/Tedd-files2/0/wlesslan-20070716135646.html

    Please help me get my WiFi and bluetooth
    I really need to use it.

    THX

    Hello

    The laptop does NOT have Bluetooth!
    That's why you can not install the BT stack!

    Regarding the WiFi network:
    I'm not quite sure what you have but here the map Intel WLan is a beautiful m document how to find the right driver:
    http://forums.computers.Toshiba-Europe.com/forums/Ann.jspa?annID=78

  • Satellite A80 129 DVD-RAM write speed problem

    Hi all!

    I have a problem. the thing is that I want to write in NERO 6 (last version purchased) a CD or DVD, but we will only write to me at slow speeds. In this laptop I MAST * a DVD-RAM UJ-830 s with DVD-R 8 x and 24 x CD - R write speed said.

    When I try to write on a CD it gives me only 16 x write speed, then where is x 24? It goes same for DVD, as I want to burn DVDs and it gives me only 2 x write speed.

    Please, do not put this fault on a CD or DVD, cause in my country there are limited suppliers of this type of media, so I won't change my media. They worked with my previous PC CD - RW fine, no speed problem.

    I want to know also if this is lack of DVD - RAM, where then find firmware for this burner?

    Thanks for your replies.

    BR, Kekec

    You should try to update nero, it might solve the problem.

    Also an update of the firmware can help, go to http://www.toshiba-europe.com/storage/index.asp?nav=HOM&page=HOM&frame=home

  • Satellite A80 129 usb mouse problem

    I have MS USB Intellimouse Optical. And if I connect the mouse to the first USB port (under the laptop computer right speaker), the mouse installs and then with the mouse disconnected constantly. As he works for a few seconds then disconnects and reconnects again, constantly. If I connect it to the other three USB ports, all is well. I don't want to use the other three ports for the connection of the mouse, but I want to use the primary, cause of handling convience (DVD-ram opening and limited space on my table). Also I installed the drivers for the Microsoft mouse, but the mouse plays the same.

    So is this hardware or software problem?

    I have WinXP Pro SP2 installed.

    Best regards, Kekec.

    Hi kekec

    Is there a possibility to check this port with another external device? It will be interesting to know if there is problem using some another unit.

    Anyway, in my opinion, it may be just the hardware problem.

  • Its Satellite M40-129 GR problem

    At the beginning and the end of an audio file, there is a click.
    Try to eliminate the defect (at the level of the user) gave no results. Click is audible in the headphones and if.
    Please help solve this problem.

    I apologize for my English. But! It won't always: o)

    Hello

    Go to the download from Toshiba site and install the driver of his most recent. If there is some noise rattling sound also check card s. power mode set it to the Please no. for energy savings.

    You can find it in Control Panel under SoundMAX.

    Good bye

  • Problem of its satellite L750-1XK - work for 1-2 minutes then cuts

    I have a Toshiba Satellite L750 1XK, my laptop is about 18 months old now

    The problem I had is that the sound works for a minute or two and then cut! I saw a LOT of people in this forum have the same problem, but I'm yet to find a thread where the problem is actually solved.

    As with most of the people with the same problem, I can plug in headphones and remove them and it works again briefly, but then turns off again. I tried everything I can think of. I don't know much about laptops, but I tried to reinstall the drivers, I checked the Device Manager to see if there were problems in there, but everything seems fine.

    Then I thought that maybe my computer has too much stuff on it and, removed everything and defraged etc. and cleaned but still not working. So I decided to go a step away and actually restore laptop to factory settings, it all scratched and did install a clean windows and its still doing the same thing.

    I have really no idea what to do now. Is this a hardware problem, if so it will be an expensive solution?

    > As with most of the people with the same problem, I can plug in headphones and remove them and it works again briefly, but then cuts off again

    Had the same problem with my other laptop equipped with a card Realtek sound and I could solve this latest installation updated audio driver the Realtek driver page.

    But it seems that your Satellite L750-1XK does not support Realtek audio chip but the Conexant audio chip.
    Therefore, the solution could not be useful for you.

    However, I suppose that there are two possible reasons for this:
    (1) failure driver sound
    (2) failure of the sound chip.

    In case of malfunction of the audio driver, I recommend you to google for driver Conexant SmartAudio HD and test the latest version of the driver available. On the internet, I find the Conexant SmartAudio HD driver version 8.65.9.51 for Win 7 / 8 Win / Win 8.1

    To manually update your driver:

    1. go into the Device Manager (right click on my computer, choose manage and then find Device Manager in the left panel)
    2. right click on the device you want to update and choose Update driver software
    3. choose Select the location of the new driver manually and navigate to the folder where you downloaded the driver

    In case of malfunction of the sound chip, you can try to use an external USB sound card.

  • Problems with its Satellite A100 and professional cards

    Hi all

    I bought an A100 Satellite less than a year ago and have had problems with 2 different business cards when using Cubase.

    -M-Audio firewire solo plugged into the TI PCMCIA card
    -Echo Indigo io (PCMCIA card)

    I am running Windows XP and Cubase SE/SX3. When running Cubase, there are cracks, the sound stops for a few milliseconds.

    I've never had any problems with my old Toshiba laptop Satellite Pro A40. It's very disappointing and frustrating. I use my new Toshiba for the Internet!

    Could someone help?

    See you soon,.
    Fred

    Hello

    This has been discussed in several topics, so please visit the following positions and get something for yourself:

    This one has a driver and registry solution:
    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=18720

    But first, I recommend you to read this one:
    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=18631

    It s long, so be prepared to read a lot. Hope you can solve your problem.

    Concerning

  • Problems with its Satellite A300 controller

    Hi all!

    I have a weird problem with my sound regulator in A300. When I use 'wheel' in front of the laptop, next to the headphones of entry etc., sound turns upward and downward very irregular - I try to turn up the volume and it jerks around a constant level of volume that ends at 10% of the desired level. I tried to reinstall the audio drivers but it did not work and overall, I don't know if there are other things I can do to solve this problem.

    Can someone help me? Thank you.

    Using original pre-installed Vista?
    On my Satellite A300, I use Win7 32 bit and it works well and properly.

  • Satellite A80-129: Mat * a DVD - RAM UJ-830 s cannot burn DVDs

    MODEL: SA80-129
    DVD RAM TYPE MAST * A DVD-RAM UJ-830 S
    SYSTEM: WINXP
    SOFTWARE: NERO

    (1) DVDRAM CAN READ CD AND DVD EASILY, IT Burns CD WELL, BUT cannot burn DVDs, IT SHOWS: G:\ IS NOT ACCESSIBLE INCORRECT FUNCTION, UNTIL IT WORKS WELL. the blank dvd is not a problem, before I used even type a blank dvd to burn.
    (2) even allow the recoding in the properties, the properties shows the Virgin dvd 0bytes.

    all PROMTLY ANSWER would BE MUCH APPRECIATED.

    It doesn't sound good.
    I had a similar problem of combustion and the end of the story, I replaced the drive ;(
    However, try to remove the drive from Device Manager, and then again to restart the operating system should recognize the device again.
    Then you could check if it able to burn the DVD s s.
    I think you should also try burning different DVD media.

    I have visited many work sites and the reader, and especially the calibration lens malfunction could be responsible for burning problems.
    This could be a worst case and in this case, the replacement is necessary.

  • Problems of its satellite A40-> after that restart everything works again

    Hi guys

    I had a problem with the sound on my Satellite A40 last night but I turned it off to go to sleep and now it works?

    What the hell went wrong my microphone does not work either.

    How about reinstalling audio driver or update
    I put t know what happened but maybe some driver or registry entries files are corrupted.

    But are you sure that you don't l l turn off the sound or microphone accidentally?
    Check it out.

  • Problem of its satellite A110-153

    Hello

    When I connect to a box to the laptop and I have the cable plug, I hear a broom / sound. What can I do?

    Hello

    Here´s a link that describes exactly what is the problem:
    http://www.elect-spec.com/faqgrdl.htm

    You have to land your electric connection between the amplifier and the machine. That's all. Since it is a very broad topic I suggest you to go to www.google.com and type in the following words: "portable computer ground loop amp.

    You should have many successes where the problem is described and solved. I would put some links on an other forums here, but I don't know how the admin´s here might react. ;)

    Cheers and good luck

  • Re: Problem of its satellite A100-590 and SP3

    After you have installed the SP3 for XP sound is very slow and I Don t know what to do.
    Sond driver is the last, but there is no change!

    Can someone help me?

    > It's a noise squeaky with hall and slow
    This looks like a bad setting in the audio settings. Check in the control panel.
    I'm sure this will help you.

    If it doesn't work try to update the audio driver you can find on the Toshiba site:
    http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  • Network keeps reconnecting on Satellite A80

    I have a network problem on my Satellite A80.

    I am connected to the LAN in my student dorm. Right after that I start my computer, I am connected to the network. After some time (2-5 minutes) I am disconnected (my computer continues to send bytes over the LAN, but does receive all the bytes). Then after a while (also 2-5 minutes), I get again connected to the local network and can surf the internet for a while, but I eventually disconnected again. And so on and on.

    300 students on our local area network do not have this problem.

    When I run Toshiba PC Diagnostic Tool, my computer has failed the network test.

    I have updated to Microsoft XP Service Pack 2.

    What could be the problem?

    Hello

    You have the same LAN settings as other students? I guess the IP address must be set on automatically.

    As far as I know this device comes with SP2 and don? t need any updates. Try to remove LAN card from Device Manager, and then restart the device. What is the status of network card device in the properties?

Maybe you are looking for