Problem of lights keyboard Acer vn7 - 571 g (Nitro)

Similar Questions

• BIOS ACER v3 - 571 G problem!

  Hello Acer first of all, my English is bad. I have a laptop ACER v3 - 571 G with i5 - 3210M 2.5 GHz and GT 640 M + 8 GB of RAM and I am very disssapointed with my laptop.

  ACER with 2.21 bios is the worst bios that I've ever seen. Laptop has 85-95 C with this bios and it stops at stake, in surfing, any judgments just randomly.

  There is no option in this ridiculous BIOS, I can't set the fan speed and I can't disable disk or turn it off, and I can not start USB because the laptop does not react on F2 at startup only when I restart, but then, may not realize that it is the USB into the slot.

  1. the drive is 100% its first use 2-4 minutes.

  2. very unstable with very bad BIOS Acer laptop and I had Flash the BIOS of the random guy and the book it is 1000 times better as with Acer bios!

  3. the battery does not work with BIOS Acer but it works with modded BIOS.

  4. I paid 250 EUR for the new motherboard because the laptop is turned off and does not start again. The service said it was 'the unknown liquid' to the motherboard.

  So, now with the new motherboard after 3 months, he broke again and it randomly stops himself. It is not because as warm-ups it stops when I open video-game-chrome or something.

  What can I do? I really don't want to send the laptop to the service they will again tell me that it's my fault because they can't repair or accept my guarantee.

  Is this normal for 680EUR + 250 with new mothetboard? I thought that Acer is a solid company by comparing with HP/ASUS, but I made a huge mistake.

  THANKS FOR THE QUICK REPLY!

  This is what I said, turn off fast boot and you can access BIOS whenever you want. With this option enabled, Windows does not full stop, just a mix between the Hibernate and shutdown. Here is the explanation of this process, and how to disable this - http://www.eightforums.com/tutorials/6320-fast-startup-turn-off-windows-8-a.html after that you should be able to access BIOS even when you turn off your laptop. This is normal with Windows 8 and keep in mind after that this system will begin in a few seconds more.

  Also, I think you should check your HARD disk because it may be corrupted, download CrystalDiskInfo and check it. If so, try to check for errors like here http://windows.microsoft.com/en-us/windows-vista/check-your-hard-disk-for-errors if it was caused by areas defective Windows needs to get rid of it.

  I do not know what causes overheating, I've got 2.21 BIOS and no problem.

• I have Acer E5-571. After the closing, I long press on button / stop

  I have an Acer E5-571 with Windows 10. After that I stopped it my laptop screen goes black. When I want to turn it on again it does not react to the mouse, the keyboard or pressing the power button. I have to press and hold the power button to turn it off, and then only I can start with a push of the power button. Pease help

  Sorry your having problems with your computer... Did you do any type of hardware change? Moved things around the power button which can be moved to the location of it... If not. Try this...

  Remove all items from the power of the computer cord, battery and charger, unplug everything that can be pluged in it. Press and hold the power button for 1 min... After that back things together and try and see if that helps at all!

  James

• Acer VN7 - 791G feeds no more

  My Acer VN7 - 791G connect not more when you press the power button.

  -No noise "light" can be heard when you press the power button. The fans do not start still turn.

  -L' laptop computer only supplies not on regardless of the charger is connected or not.

  -Tried pressing the power button for a minute without success.

  -Laptop worked perfectly the day before.

  -Last stop occurred via the session of Win10, and then close the locking cover.

  I read in some messages that I could try to remove the battery or the RAM, but with this model of laptop, it is not possible to easily remove the battery or to access the RAM.

  Is there anything else I could try to solve the problem?

  As your laptop does not turn on, check if the options for resolution of the problems mentioned on the link below for help:
  http://Acer.custhelp.com/app/answers/detail/A_ID/4/~/What-can-i-do-if-my-computer-does-not-power-on%...

  If the problem persists, we recommend that you contact the nearest Acer service center via the link below to get help because there is a probability of hardware problem:
  http://www.Acer.com/AC/en/us/content/service

  Hope this will help you.

• Windows recovery does not. Acer Aspire 571 E1

  Hello

  I have an Acer Aspire 571 E1, then I installed windows 8 pro upgrade to 8.1 pro, now my ram show I have 6 Gig of ram but available only 2.45.

  I tried to reinstall windows, but he used, I tried using recovery of acer (at start up press Alt + F10). nothing happens

  Even when I tried to install I have hollow windows itself, after I get the product key, he asks what I want (Nothing)

  Then, it shows that there are things I need to fix, but there is only a blank page that shows nothing.

  I also tried to boot from the disc, but when I press install now, an error, saying that I entered the product key is not valid. but he never asked a.

  No idea how I might solve this problem.

  Kind regards

  Philip Pienaar

  Hi, sorry, but a friend of mine contacted me on the problem, it has something to do with the Windows I have installed.

  My windows came with the laptop must be resettled and not to try to install windows 8 pro.

  Sorry if I wasted your time, but thank you.

  Kind regards

  [private under the leadership of life]

• VN7 571 Windows clean install

  Nice day

  I bought a new laptop of VN7-571-7309 with the following specifications:

  CPU: i7-5500u

  RAM: 16 GB DDR3L

  VGA: GTX850m with 4 GB of RAM

  HDD1: Seagate 2 TB HDD

  HDD2: Kingston SSD 60 GB.

  OS: Win8.1

  Now, as you know, 60 GB is very low for the windows as applications drive he will eat fast. WoW by will add at least 20 GB so this is not going to work.

  My idea is to replace the 2 HARD drive to with a 256GB SSD I have and use it as a C.

  Now, I could in theory (and practical, I did) moving my OS partition to the new drive is smaller, but I want to do a clean install. Now that the package is so how can not come with discs of all kinds I do this?

  Create a recovery plant by default and a drivers drive and backup applications:

  http://Acer.custhelp.com/app/answers/detail/A_ID/29934#_ga=1.248271175.1570583413.1443933349

  After you create a disk to factory default recovery and apps and backup the drivers...

  You can decide if you want to use your recovery disk and do a clean install of vanilla...

  http://Windows.Microsoft.com/en-us/Windows-8/create-reset-refresh-media

  http://us.Acer.com/AC/en/us/content/drivers

  There is no need to enter a key.  The key is automatically retrieved from the motherboard/BIOS card.

• Help me. Why recovery.txt and Python27 in C after I sent my ACER VN7 - 591 G-77FH to add ssd?

  I brought my pc (ACER VN7 - 591 G-77FH) to ACER in order to make it add ssd, check the pc for heating with w10 and usb ports. They said initially they would format the HDD (1 TB) and I would lose my data. I said 'ok '.

  Today I went to ACER to get my pc and the guy at the front desk told me that they cleaned the fans and that the problem with my usb ports is software, so that they had to reinstall the operating system.  More, he told me they did a system restore. I asked him what he meant with "recovery", but he did not explain very well (I thought that it was not a pc technician) and told me that they formatted the hard drive and installed the operating system on the ssd.

  When I came back home, I turned on my computer and I had to set it up. A configuration screen acer appeared and then w8.1 supposed to be configured with my mail, number mobile password etc....

  When I walked into my account, I noticed that in C there is two things:

  (1) there is a txt file named recovery which is empty

  2) there is a folder named Python27 (na not they remove it?) Why?). It looks weird because there are some files (11/03/2016) in date from (tomorrow), while NEWS, LICENSE, python and pythonw are as of 12/05/2015, finally README is dated from 21/11/2015

  So... What did do?

  I tried to install w10 from usb to reset everything, but when I start it up, there is only the Boot Manager Windows (Crucial 500blah blah blah blah) in the start menu...

  What can I do?

  Help me

  Since you're still running windows 8.1, I suggest you create a recovery media using Acer recovery tool.
  Once this is done, you can delete all the partitions on the unit 0 and do a 10 windows clean install.

• BlackBerry Smartphones retro lighting keyboard turn on and off by itself

  I got a new Verizon BBTour today, I had no problem to transfer my BlackBerry Storm 9530. I typed my first email tonight and found that the backlight of the keyboard is disabled while I was typing, I was about to get up to turn on the light of the House, then light keyboard turn around himself, then a few seconds later to stop again. He was turning on and off itself.

  Anyone have this problem? or does anyone know if there is a problem or that I need to set up somewhere? I checked the configuration on the screen/keyboard, this is exactly the same as the storm I. Help, please

  Joseph

  The backlight on the keyboard is automatic and the sensitivity does not always fire when you would like to.  But, if you are in low light and keyboard backlight does not instantly, place your hand on the keyboard and he rip off and the light.  If the sensor captures a bit of light, albeit indirect, it turns off the backlight.

  There is not currently of an option to change this behavior and it is battery.  It is not an irregular operation of the device.

• keyboard acer aspire 5736z laptop computer does not

  keyboard acer aspire 5736z laptop, windows 7 64 bit does not

  Hey Joe,
   
  Welcome to the Microsoft community.
   
  I understand from the description of the issue that you are having problems with the keyboard on Acer Aspire 5736Z. I'll be happy to help you with this problem.
   
  (1) what exactly happens when you try to use the keyboard?
  (2) you receive an error message?
  (3) have tried to check with external keyboard?
   
  Method 1:
  Step 1: I suggest to start the computer using safe mode and check if the problem persists.
  What is safe mode?
  http://Windows.Microsoft.com/en-us/Windows7/what-is-safe-mode
  If the issue is not persistent, then follow the steps in step 2 to find the cause of the same.
   
  Step 2: Clean Boot Mode
  I suggest to maintain the computer in clean boot mode and check if the problem still persists. A clean boot to check if startup item or services to third-party application is causing this issue.
  You can read the following article to configure the computer to boot:
  http://support.Microsoft.com/kb/929135
  Note: After the troubleshooting steps, see step 3 of the boot link to configure the computer to normal startup mode.
   
  Method 2: I suggest you to follow the steps to check with on the screen keyboard.
  Type without using the keyboard (on-screen keyboard)
  http://Windows.Microsoft.com/en-us/Windows7/type-without-using-the-keyboard-on-screen-keyboard
   
  Method 3: It seems you accidentally locked your keyboard and touch pad by pressing the function key.
  (a) just press: FN + F6 to unlock the keyboard and the touchpad.
   
  If the problem persists, I suggest you to contact Acer support for assistance.
  http://support.Acer.com/product/default.aspx?modelId=3322
   
  I hope it helps. If you have problems in the future, please let us know. We will be happy to help you.

• Strange problem with the keyboard

  Hello.
  I have problem with my keyboard. It works with delays. I don't know how to fix it.

  Hello

  What do you mean by working with delays?
  As far as I know, you can change the keyboard settings in the keyboard properties.
  Also, if you think that it s not a fault or parameters of software problem but hardware malfunction, you can try to contact the service agent.
  But before you contact the ASP you should recover the operating system.

  Good bye

• Problem with the keyboard and audio on Satellite L40

  Hello world
  I just installed XP SP2 on my Satellite L40 (BTW thanks to all of you who helped me overcome the problems during this operation with your son), but I have a problem with my keyboard. I have a QWERTY keyboard and after I installed xp, he worked as a qwerty, I fixed it, now all my letters are working very well, but I have some problems with certain symbols, such as @,., _, if you understand me.

  Could someone help me?

  I also have problems with my audio, in fact I have no sound at all, in the Panel, he said that there is no audio device found.
  I've seen a few threads which said that I should first install kb888111 and another thing is likely, but I can't find the other. I downloaded the audio driver from the toshiba Web site; Thank you for helping me in this area also.

  Good bye

  I have the same problem with the sound... I found hotfix kb888111 and I instaled this one... but when I tried to start installing driver sound a window popup say thet there is an error and cannot continue with the installation driver...
  I found hotfix kb888111 in this file that i have downloaded from the toshiba site: english\sound driver\mshdqfe\win2k_xp\us\kb888111xps2...
  I don't know what to do... Someone else knows...

• S205 - problem with the keyboard (right shift key)

  Hello.

  Google couldn't really help me, so I try my luck here

  Two days ago, I met a rather strange problem with the keyboard of my S205 (running Win7 64 bit). For some reason any the right shift key is no longer works as a shift key, but it has the same function as "Alt Gr" key on the right side. FYI: German keyboard. For example, the @ is on the same key as the Q here and normally I have press the AltGr key to type a @. Now the same thing with the right shift key.

  I tried a couple of things already, none of them helped. I have accidentally changed the layout of the keyboard, checked once again in the Control Panel, everything is OK here. No Fn - keys are activated. I tried to plug in an external USB keyboard - on that one, the shift key works fine. The right shift key is the only key that does not work properly. I even tried the keyboard on the screen so I could see which key was pressed when I pressed the SHIFT key and she showed the "Alt Gr" - button is pressed.

  I am open to any suggestion. Thank you

  In case someone might have the same problem - unfortunately I don't have a solution. He solved somehow itself a few months later. Really strange thing, but the key is working again.

• Reclassification of Viata W7 HP HP; Viata in Spanish 7 in English, incompatibility in the transfer of WindowsEasy. Incredible also, in its regional, my country Venezuela is not so I now have problems in the keyboard language and the motto puntuation.

  Reclassification of Viata W7 HP HP; Viata in Spanish 7 in English, incompatibility in the transfer of WindowsEasy. Incredible also, in its regional, my country Venezuela is not so I now have problems in the keyboard language and the motto puntuation.

  Thanks for your reply but I've solved the upgrade Viata HP to W7 HP Viata in Spanish. Took a lot of effort but is workig now. My major concern is on the regional setting: my country is Venezuela and this is probably the only country that is missing from the long long list so I now have problems in the keyboard language and the motto puntuation. This has nothing to do with the Home Premium edition or full, I think it's just an incredible mistake. How can this be repaired? MS will have remedies this problem and probably to publish an update to fix this problem. Thank you again and hope that this question goes to MS. looks.

• My Acer Aspire 571 e5 allows me to connect, but then I get a black screen and I see my cursor

  Hello

  So my Acer Aspire 571 e5 which ive been using for about 3 days just had a windows update. Now, it starts well but I get a black screen when I connect. However, some programs are always able to see and popup randomly. I also tried to go into my bIOS, but it asks for a password that I don't know.

  If you press CTRL + ALT + DELETE you are able to open the Task Manager?

  or try this:

  (1) once you are on the screen of login password, press on and hold down the SHIFT key and click on the power icon (lower right corner of the screen) and restart your computer... (Remember do not type a password)
  (2) you will get advance options. Click on troubleshoot---> advanced---> start---> restart settings---> and select SAFE MODE WITH NETWORKING

  (3) once in office in safe mode, open Device Manager, click on the video card, right-click on it and choose unisntall

  (4) restart and check if it works

• SSD for my Aspire V Nitro 15 VN7 - 571 G-72UZ

  I can add a SSD for my Aspire V Nitro 15 VN7 - 571 G-72UZ? It's super slow...

  Absolutely Yes.

  Update to the SSD HARD drive is a good way to improve your PC. My suggestion is to only install the OS on the SSD if the HARD drive still works. Then use the HARD drive as secondary storage. This would save space on the SSD so you won't need to buy SSDS with capacity. I don't know what your operating system, but normally a 120 GB SSD is sufficient for the OS. And you can install some favorite programs if there is a lot of space left after the installation of the operating system.

  Clean install and cloning two works, yet if you want to keep all the current personal settings, cloning is the best choice. You can learn more about transfer of HARD OS to SSD drive here. Note that after cloning or a clean installation, you will need to remove the old HDD or change the boot settings in the BIOS to check if the operating system starts. If everything is OK, reformat the partition to the OS on the HARD drive in Windows PE mode (you cannot format under Windows environment).

  Kind regards.