Problem of liquid E700 Acer when the music is playing in the car

Whenever I connect my acer e700 to my car to listen to music in the car, the music seems to stop, then I manually play it again, then it stops again. So I went back to the phone and got a replacement and hope that the problem would be resolved, but the same thing happened (Im using the pre-installed music btw player)

At first, I thought it was my power cord (connecting the phone to the car) for pla music, but the problem is not the power cord because my old samsung y duos plays music in the car without stopping or problems at all.

I also tried to download a free music player (AUDIO STREAM), it seemed to diminish stop the music but a few songs always stop when is played in the car.

Any thoughts on why this is happening? My opinion is that this phone, the Acer Liquid E700, (I mean all of it) is partly defective and cannot play music hen plugged the car wihtout stop smoothly.

I bought the E700 liquid Acer a few days ago. And I had the same problem. On Spotifu, the music just stops after a short time I was playing in the car, connect my phone via a cable to the stereo in my car.

I found a workaround to the problem. It seems it has something to do with DTS, which must be introduced in Middle > DTS Studio Sound. When you turn off this setting the music no longer stops. When you do not want that it turned on, do not set the volume of your phone up, but around 70 percent level. You can then increase the volume of your car stereo to adjust.

It is not a solution to the problem, but it is at least a workaround until Acer solves this problem.

I hope this helps.

Dan

Tags: Acer Smartphones

Similar Questions

  • Problem sending pictures through texting when the WIFI

    I recently move carrier to Cricket wiresless (Yes uses AT & T network) of the Sprint. Since I made the change, I had problems sending pictures through texting when the WIFI. I contacted the Cricket Wireless support and they had me reset the APN settings, he has to work because I also disabled WIFI at the time. Since then, I realized that I don't have the problem, when I cut the WIFI.

    Someone at - it similar problems?

    I found the resolution on Adroid Central:

    Wow! Presented this to the customer service email of Cricket and they responded in 12 minutes confirming:
    Billy M. (Cricket Wireless)
    16 Dec 08:46

    Hi Evan,

    Please contact the Support of Cricket. I'm sorry to hear about the problems you are having with your MMS then on the WiFi. Our team of network has been aware of this problem and is currently working on a resolution. In the meantime, you can use one of the IP addresses below in your MMS proxy under the APN settings that should solve the problem.

    192.168.196.78
    192.168.196.79
    192.168.196.117
    192.168.196.118

    Thank you
    Billy
    Looks like the guys from reddit were correct and the IP addresses are legitimate.

  • Problem w / Airplay of MBP when the TV is turned off

    I just got a new 4 k TV. My previous TV was an LCD and this set up worked well.  I plugged my ATV to my receiver and connected the output of my cable box to my TV.  Let me to transmit using Apple TV and also listen to the music of itunes libraries from my Mac to the stereo with the TV off.

    With my new system, I have the same setup but now when the TV is off, I have intermittent cuts in the music accompanied by 'no signal' on my receiver flashes.  Basically, the only way to listen to music from my mac to my receiver seamless is to have the TV on which I don't want to do.

    Someone knows something similar?  Any suggestions?  Is there another way to play music from my macbook to my receiver outside the Apple TV.

    The device that Apple created for audio is only the Airport express.

  • the problems of sound, lost power when the power came back... no sound

    I have a Creative x - fi titanium sound card to sound problems, loss of power... when the power came back... no sound... Please help!

    Maybe the following link would provide a few ideas:

    Windows 7 - no sound in Windows
    http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows
    (valid for XP - Vista - 7)

  • problem viewing on XP sp2 when the source is a flash drive

    I have a SanDisk 16 GB flash drive, with several stored movies.  Try to watch the movie on my laptop (Acer) and can hear the sound but no picute/video? All that it shows are the skins.  Thank you

    If they are be XviD .avi files... you probably
    need the XviD codec.

    This can be checked by using the free software GSpot:

    Download GSpot
    http://www.free-codecs.com/download/GSpot.htm
    (left-click the text: "Download GSpot")
    (on the next screen...
    left click: 'Download [GSpot 2.70]')

    You don't have to install it... just unzip the file and
    GSpot.exe left click to launch.

    GSpot Codec identifier
    http://www.headbands.com/GSpot/download.html

    GSpot Super quick start
    http://www.headbands.com/GSpot/v26x/Quick_Start.html

    (FWIW... it's always a good idea to create a system)
    Restore point before installing software or updates)

    XviD Codec
    http://www.xvidmovies.com/codec/

    XviD FAQ
    http://www.xvidmovies.com/FAQ/

  • Problems with adobe Flash Player when the pc is in a field

    Hello.

    Currently, I have problems with a program runs on windows 7, while the pc is in a field.

    If the PC is not in the field, the program works correctly.

    What could be?

    The program runs on the flash drive.

    I strongly recommend to contact the developer of this application or your COMPUTER administrator.  I can't think anything in Flash that will disable the use in a field.

  • Power problems: computer turns off when the power supply cord is unplugged.

    original title: power problems: computer shit turned off when the power supply cord is unplugged.

    I have a HP Pavilion dv2000

    Windows vista home premium/sp2

    AMD Turion (TM) 64/2 1.80 ghz processor

    1 GB memory

    32 bit operating system

    I have 2 problems with this laptop.

    !. I have lost the power cable and bought an expensive one online step (model: PA-1650-02 c. input 100-240v 1.5 put out a(1,5A) 18.5V 3. 5 = a)

    When I first plugg cord battery charge light came on the balance, then he started to come on and outside.

    now its completely off, even with the power cord plugged in. on the lower right part of the screen its showing that cord is connected to the power supply and the battery is fully charged, but as soon as I unplugg the power cord or remove the computer cut right away.

    the second problem is that the left mouse botton does not work, the work aside right very well. I went in the proprties to put it right, click on to, but who does not work either. I've updated the drivers but still nothing.

    Any help will be greatly appreciated.

    Hi aloum,.

    (a) what kind of mouse you are using?

    (b) the left button of the mouse seems to be stuck or it does not meet the click? This only happens with certain applications?

    Step 1: Test the mouse on another computer or another mouse on the test computer

    To determine whether the mouse or the computer is defective, follow these steps:

    1. test the mouse in question on a system that works, you know. If the problem appears to follow the mouse, you may need to return or replace the mouse.

    2 test a mouse you know is working on the computer in question. If the problem seems to stay on the computer, then the problem is most likely related to the software.

    In regard to the battery not holding charge

    Battery problems are often associated with the battery itself. If you encounter this problem, contact your mobile PC manufacturer. If you purchased the battery separately from the notebook computer, contact the manufacturer of the battery.

    Troubleshooting battery problems

    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-battery-problems

    Thank you, and in what concerns:

    Ajay K

    Microsoft Answers Support Engineer

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • 11G with ASM and RDBMS problem when the server reboot (dependencies)

    Hello

    I just install the new version 11G with ASM for the first time. When I restart my server, RDBMS start before the ASM service isn't over to start. It's like when the care services, CSS and EVM have been replaced by the OH dependencies have been lost. The OH service is started but it's as if he is not optional and others start immediately (ASM and RDBMS).

    Early restart, I see the OHservice started and the DSO after that (on the road), but when the RDBMS starts the instance handle of stay (inactive and not mount) because unit number logic for the catalog of service is not available yet. I see in the alert.log to RDBMS catalog segment is not found or not existing (/ catalog not nfound).

    If I wait about 3 to 5 minutes and restart only the RDMBS all start without problem.

    Is there a way I can adjust the stop with the 11g version service or use the crsctl to indicate to the RDBMS service start only when all the ASM service (MON) segment are mount?

    Thank you

    Normally the database is started by the clusterware and not by the windows service.

    Thus, there could be 2 ways to do this:
    (a.), try to assign the Windows of the database service to manual. It must be started by clusterware.

    If that doesn't work, try this:

    (b) leaving the service to automatic startup (Windows), but disable the automatic start of the database. This you can normally change in the registry
    -Online-online Oracle-online key HKLM => ORACLE__AUTOSTART
    (not 100% sure on the key, but I'm sure that you'll be able to find it.)

    Unfortunately do not have atm WindowsCluster to try it myself.

    Additional please check if your db instance has the correct dependencies defined in the clusterware.
    Make one

    stat ora res crsctl. .db Pei

    and paste it here.

    So good luck...
    Sebastian

  • How to block all the videos and ads on all the site as how it is when it shows the gray screen when the flash player needs to be updated

    Hi there please help me. I didn't have this problem until two days ago when the browser updated itself. I have the youtube video downloader add on and always use it. I'm on a data plan and it used to block videos and add ads which I like, but now is not because of the update, I came back to the old version, but it did not help and I downloaded the flash but block it does not work. It makes the slow loading of pages and uses a large amount of data that I tried many things like all the plugins of switching to add it on the menu to activate ever and it doesn't quite work. Before it used to show the gray screen, where it says "the flash player is out of date" on videos and commercials, but he does not do this because of the update so please help me to do it again.

    I solved. On the firefox support page they will give you information about the HTML5 player and they say there that firefox uses it only 38 version before so I'm 36 version and it worked in blocking it as before.

    So its all sort and if everyone wants to do the same thing go to https://ftp.mozilla.org/pub/firefox/releases/ and all previous versions will be there.

  • How can I keep a connectivity when the DNS server is not available?

    We have remote locations with several computers that are joined to our domain via a gateway to gateway VPN. When VPN breaks down, they lose the connection to our CD/DNS server. Their ip addresses remain the same, since they are managed by their local router but they failed to connect to other devices to their location even though the devices have static IP addresses. If I understand the use of the LMhosts file must allow me to allow them to keep local communications between computers. I think the entry in LMHOSTS should be like this for each local machine they need to access.

    10.0.0.1 SampleEntry #PRE
    Is there a better way to solve this problem, however?

    Hi Jim,

    Thanks for posting your question in the Microsoft Community forums.

    I see from the description of the problem, you have a problem with connectivity indomain computers when the DNS server is not available.

    As the computer is connected to the domain network, the question you posted would be better suited in the TechNet community. Please visit the link below to find a community that will provide the support you want.

    http://social.technet.Microsoft.com/forums/en-us/itproxpsp/threads

    Hope this information helps you. If you need additional help or information on Windows, I'll be happy to help you. We, at tender Microsoft to excellence.

  • When the members of the network load

    I have a group with:

    1 ps100 (Yes its very old)

    2 ps5000

    and now I have 2 new ps6100 with enough space to replace all of them.

    I put 1 ps6100 in the Group and now I want to delete 1 ps5000 of the group to offer a space in the basket for the other ps6100.

    My question is: is it possible in a life situation?

    What will be the load on the switch when I move the old ps 5000 out of the Group?

    VMware will find it difficult to connect to the San or the datatransfer will be strangled?

    hope someone can give me an idea.

    Greetings Gertjan

    I went on vacation, so he had to wait a bit.

    I noticed that when you add a member to a group, a large amount of data is transferred to the new Member.

    This is done so that all members in the face of the load they can.

    The system transfers the data online, without loss of bandwidth.

    the same system is used when you move a member to another storage pool.

    so no problem with bandwidth where and when the Member is moved to the storare pool is empty, all data are transferred to the other members. When a move is completed the Member is empty and can be deleted in a few minutes.

    In conclusion: no bandwidth issues when moving and deleting a member of a group.

    This can be done in a Spanish production of work.

    thx for the help.

  • Missing taskbar when the TV is connected as external monitor.

    When my TV is connected as an external monitor via hdmi with the help of Windows 7 and my TV is off, the task bar are missing on my computer screen.

    Hi Rosalinda,

    According to the description, you experience problems with lack of taskbar when the TV is connected as an external monitor via HDMI cable.

    Certainly, I understand your concern.

    I suggest you refer to the suggestions provided in the following Microsoft Community link given below and check if that helps.

    http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-desktop/Windows-7-taskbar-missing/f0487eaa-0d44-459e-ae35-d69af976d58b

    I hope this information is useful.

    Please let us know if you need more help, we will be happy to help you.

    Thank you.

  • Issue when the external Web service call

    Hello

    I'm calling the webservice from BPEL which fails with the following error:

    Cannot call endpoint URI 'http:---' successfully due to: javax.xml.soap.SOAPException: failed to read the answer: org.xml.sax.SAXParseException: content is not allowed in the prologue.

    When I try to test the standalone version of webservice, it returns the following data-


    < assystEJB >

    < AssystUser >

    < id >

    <! [CDATA [1409]] >

    < /ID >

    < shortCode >

    <! [CDATA [TESTUSER]] >

    < / shortCode >

    < / AssystUser >

    < / assystEJB >


    What could be maybe wrong with integration?

    Pointers are appreciated!


    Thank you!



    No guys, his problem with binding HTTP adapter, when the REST service is invoked by using the HTTP adapter, it adds its own operation.

    Due to which this error is visible. I now invoke service REST of java and its working fine.

  • We get error #2154 when the NetConnection instance is connected.

    There is a certain line of code in which I get this error when you try to access the news a NetStream or soundTransform property, at least when using RTMP connections.  The problem?  It happens even when the NetConnection instance is connected and has not lost its connection, but all documentation says about it is that it "may be due to a failed NetConnection.  What else could be the cause of the problem?  Thank you.

    you check in for the success of your netstream before trying to access its properties?

    If you think you are, show your code.  If you're not, fix that.

  • When the memory coherence is full, what consistency do?

    Dear Expert:

    I have a problem in customer, they ask:
    When the memory coherence is full, what consistency do?
    He takes care to write data or the entry on the disk?
    If it can be supported, how can I config?


    I read some documents, but I find things like this:
    < local plan >
    LRU <-eviction strategy > < / eviction strategy >
    < high-units > 1000 < / high units >
    < expiry delay > 1 h < / timeout >
    < / local plan >

    but I can not find somethings on the coherence jvm memory usage?


    Thanks in advance.

    Hello

    There is no magic solution to stop short of memory coherence. A cluster of coherence is a limited resource and has a finite size and you need to do some sort of exercise as you would with something like a database capacity planning system. You wouldn't continue to put data in a database without him running out of resources, and the same is true with consistency.

    Yes, there are things like expiry which allows you to limit the size of the caches, but like the previous poster said, when the limit is reached data will be evicted from memory. Unless you have some form of persistent storage for these data using something like a dumps, while the data is lost.

    You can set the overflow to disk so that when a size the cache limit is reached as described here http://download.oracle.com/docs/cd/E15357_01/coh.360/e15723/cache_examples.htm#BACCHCIA

    The problem with the ousting of size based and exceeded the size in function, is that the limit is per cache per JVM. This means that for a system with several caches and services that you usually end up expulsion or overflow to disk for a cache that reached its limit when there still may be a lot of memory left that you need to allow for each cache being full in your design.

    I saw people in the past are trying to find different ways of ousting of data based on the used JVM heap, but they never seem to be satisfactory. If you've seen a chart of the JVM heap usage you will see that it is usually a model of Sawtooth constantly up and down. A JVM could hit 90% use but still have a lot of real space because he had not recently made a GC. If you have a schema data eveicted when the reached JVM say 90% you could start to expel the data too early. Also, it's probably enough data in a cluster push possile faster than data can be evicted if you might still run out of memory. A cluster of coherence consists of multiple JVM processes and if you get skewed the disaggregation of data or you caching of objects of different sizes, it is quite possible to get Java virtual machines in the cluster running off lot well before others. The project I'm working on that, we had a situation where we had a few nodes in the cluster using more than 300 MB of heap more than the other nodes in the cluster - is quite a big difference when the total heap was only 2.5 GB.

    As I said the best thing to do is good capacity planning. Work out how much you need to organize and work on the size of your cluster based on that data. You probably still have some sort of eviction of the data well. The system on which I work at eviction of the moment according to some data and custom eviction of other data based on business rules. Custom eviction is juats another process that verifies the data and expels the relevant stuff.

    JK

Maybe you are looking for