Problem of modem satellite 1005

I upgraded the OS from Win XP to Win XP Pro home. When I am trying to connect via an internal modem there is a dial tone, but I get the message "the line is busy" after that the number 4 is composed. It is repeated every time that I am trying to connect. I tried the same number of regular phone by phone and it works fine.

Post edited by: WizardOz

Hello

Have you checked all the settings in the properties of the modem (for example the adjustment wheel)?
Also, make sure the dialing rules. Is your well configured Dial-up connection (country, area code)?

You can also try to remove the Internet network connection and make it again with the Network Setup Wizard.

It may be a bad attitude somewhere in your settings.

Tags: Toshiba

Similar Questions

  • Satellite 1005: Push the power button, will turn off the AC power.

    Laptop: Toshiba Satellite 1005

    Problem: When I press the power button and let go, the laptop immediately loses all power.

    I use the power cord plugged into the laptop, the power supply light is green, but when I press the power button and let go, as soon as the power light goes black(turns off), nothing happens.

    Howerver, if I PRESS the power button without letting go, power LED lights, but the laptop won't boot at all, no Startup logo, no sound no matter what.

    It's the second time this has happened, the first time, I let stand overnight and the next day she booted up fine.

    Currently, the laptop is cold, it did not work, but always the same thing as described above.

    There are no changes made to the laptop.

    Any ideas?

    It seems that the contact, the power button is faulty. Better to elevate the laptop to a Toshiba service station for a check.

    I n ' t´t think that it is a software failure.

    Good bye

  • Problems with disk Satellite pro 4200 hard assembly

    I have problems with a Satellite pro 4200.
    The Notbook reads no more disks. Undercarriage I traded the loan, but did not work. Undercarriage is addressed, but it is read the discs is not possible or formatted. Also, an update of the Bios is not possible, as undercarriage reads no more disks.

    CU
    Eltgen

    Hi Eltgen

    Sorry, but it is not easy to tell what the problem is on that path. If I understand you well you have built in a new floppy drive, because the old one was faulty. Am I wrong?

    It will be interesting to know is the new part already used. Perhaps is the new one also defective. I hope that a little light is on if you put the disc inside.

  • Strange problem with my Satellite A200

    Hello

    I have a problem with my Satellite A200-1DY.

    In the last two days, this occurs twice. When I start the laptop there are three icons, systray, speaker, battery and network icon, and then, the laptop stops and does not work. I can't use the mouse or keyboard and the cooler fan does not work.

    When I put my hand the area where it is the processor it is hot enough. I can't reset the laptop. At first I have to disconnect from the mains. After that I restart the laptop. The cooler fan starts very quickly and it removes a lot of heat from the CPU area.

    What can I do?
    Sorry for my horrible English and marry Christmas.

    Hello

    At first, I must say that your English is very good and understandable. Now after this compliment go back to the problem described. ;)

    I have too many Satellite A200 and I installed Vista and Windows XP Home edition, several times and never noticed a similar problem. I must say that all my tests were with the own operating system preinstalled.

    In your case, it is not easy to say why this happens, but it turns out that some process must be loaded and at this stage of the computer cell blocks. Usually, if you keep the Start button / stop for 5 seconds, book it should be OFF.

    You must understand that no one knows we what's your personal operating system configuration and if there are some applications you have installed the last days. Exact an application that runs in the background may not be loaded properly and blocks for laptop.

    What should do? You can enter MSCONFIG and check all entries of Systemstart. Try to disable all the stuff, you don't need and try it again. Maybe you will be lucky and find out if there is something that starting cell blocks.

    Sorry, but it's really not possible to say why this happen. If you want you can try to roll back the OS to an earlier time until it starts in the hope that the BONE will be work as before.

    Bye and good luck!

  • Problem with my Satellite C650D - 10 d of charge

    I have some problems with my Satellite C650D - 10 d and its battery.

    Indeed, when I want to reload my computer, it will no more, charge his battery to 99%, then it says "Blocked, not supported" and the corresponding light is off instead of orange or yellow-green.

    Then, after using my computer on battery, if I want to load, plug is not enough, I must remove my battery and replace. Charges of battery, 99%, once again.

    The problem is recurring and I don't know what to do anymore. I tried to get an empty using the BIOS battery (because Windows 7 turns off the computer when the battery is at least 5%), to see if there was a problem of calibration of the battery, but this isn't the case, and my problem is still the same.

    Hope you can help me ;)

    I recommend the update to the BIOS.

    Not sure if the solution in your case, but I read in some discussions that the BIOS update could solve battery problems.

    Otherwise if the BIOS does not help, then you should check if the new battery could be the solution.

  • Problems with ADSL modem Satellite A100 - isuser.dll might not be installed

    I tried in vain to install two different modems for ADSL on a Satellite A100 (running Vista).
    I started by uninstalling the drivers on the computer and then install the new 32-bit drivers from the manufacturers Web sites. (Tompson ST330 and Alcatel 330).

    Installation always seems to be going well until the end of the process, when he said that he did not and suggested that I call my ISP.

    It seems odd that two separate modems, made by different manufacturers do not reach a similar to the installation point.

    I know that the usb cable, filter, cable, modem and line are all ok, as if I unplug the modem to my laptop and connect it to my desktop (XP), the desktop can connect to the Internet without any problems.

    At this point, I got an error message that says "an installation support file that c:\...\_isuser.dll could not be installed - Access denied. "SpeedTouch PPP adapt."

    Any help would be greatly appreciated.

    Ken

    > I did uninstall the drivers on the computer and then install the new 32-bit drivers from the manufacturers Web sites.

    CA? It's really difficult to understand what exactly you were doing! Why did you deleted the drivers from the laptop and then installed all drivers from the manufacturers Web sites? And that the drivers have been removed?

    The entire description confuses me?  :|

    However, in my opinion, is there something wrong with the system files. The simple and the best way to solve this problem is; Recover the laptop with the CD after the operating system configuration and recovery Toshiba around trying to install the ADSL modem as shown in the modem manual!

    Install all 3 third-party applications or drivers after installing the CD recovery because of the bad influence!

  • Satellite Pro M40x: Problem strange modem

    I have a new TOSHIBA SATELLITE PRO M40X with "TOSHIBA SOFTWARE MODEM" notebook inside.
    When I open the internet connection:

    -Once the modem is OK immediately and I have the internet connection.
    -a few times I once the error message "phone line is not compatible with this modem. Analog phone line are supported only. "Disable the signal: check the modem and phone line connection. But the second time everything is OK.
    -Sometimes I have to try several times before you have the modem with the telephone lines connection.

    Please help me solve this problem.
    Details of the modem driver: version 2.1.47.6 date 11/02/2004.

    Thank you
    Best regards

    Hello

    When you make a dial-up connection, a standard telephone line transmits information. Note that a phone is not necessary just the line. When the line is used for telecommunications, the phone line busy for incoming calls. In most cases, digital telephone lines do not work with analog modems. You must have a standard (analog) phone line to transmit information.

    In order to minimize interruptions, it is better to use a line that doesn't have a call on hold or multiple extensions. When a modem sharing a line with regular phones, it is important to inform people not to pick up the handset, while the modem is in use.

    If someone picks up an extension, they will be greeted with a shout loud and the modem disconnects. Incoming calls on a call waiting system will also cause the modem disconnect. You can use the function call waiting to cancel to avoid this problem.

    Another issue to consider is that some of the newer telephone systems are not compatible with standard modems. A school or professional phone that has a variety of features, such as call waiting, voicemail and call-one parking, maybe isn't compatible with a modem.

    Good bye

  • WinXP Conexant Sound/Modem satellite P300D driver problem

    Hello

    I have a strange problem with my Installation of XP. I had to reinstall XP two days ago because there no periodically starts.

    In any case on my new install, I can't install THE Conexant drivers, who would be the modem and audio driver. I need the modem, so this isn't the important point, but the sound is annoying. I've been trying several drivers I found on the internet but none work, they all complain to the facility, there is that no devices found which would correspond to the driver.

    The strange thing is that I was able to install these drivers, when I installed XP about 3 weeks ago... I have no idea what the problem is now.
    Both devices are displayed as "PCI Device" in Device Manager. What is interesting is that the Instance ID of the devices device do NOT correspond with those who are in the files of the driver... maybe a problem with the chipset drivers, who pack things?

    Any advice?
    Thanks in advance :)

    Satellite P300D-13N PSPDCE

    Have you installed the chipset drivers?

    Are all the other devices in device not installed Manager?

    Have you downloaded the correct driver for the P300D, not the P300?

  • Modem satellite M30 problem

    Does not my modem (Lucent/Agere?) - (downloaded from the Toshiba site) drivers are installed without problem (no warning in Device Manager), but the modem can not open the (virtual) serial port.
    I tried all the possible drivers and installation plans.
    I installed successfully Nokia mobile (via IR) as a modem and it works without problems. But the internal modem is not able to open the serial port when running test.

    Furthermore, I can't change the settings of resources.

    How to solve the problem, do you have any suggestions?

    Can someone tell me which driver is appropriate (because I still think I need to find the right driver).

    Finally, I do not have the original CD from Toshiba to get the driver... If anyone has the same model and you can send the driver by e-mail, I will be very grateful! (E-mail: [email protected]).

    All the best, David

    Hi gziro,.

    is it possible to give me some more information? In particular the exact Productname M30 - XXX and your current operating system? Maybe I could help you with this information.

    Hans Bye

  • Satellite P100-109: problems audio / modem

    Hello
    you just bought the satellite. win XP Home Edition thereon.
    I have finished to xp pro, but I can't get the modem and the noise at work.
    What ever, I do does not help. The satellite says there is no audio device and no modem device.
    everyting installed in the correct order, drivers kept the installation of xp home.

    Helpdesk suggested I rebuild of xppro to XP and then instead of full format just upgraded
    for XP pro.

    Help, please.

    Hello

    Well, you have installed from the original CD of Microsoft windows and then all the drivers of Toshiba.
    The fact is that, after the installation of operating system, the Toshiba drivers must be installed in the correct order. It is very important.
    After the installation of the OS, you must install all MS and then the Toshiba drivers and tools.
    I also found on page templates another Satellite P100 driver Toshiba: PSPA0E, PSPA3E and PSPA6E.
    You should check your device and you should be 100% sure that you are using the correct drivers.

  • Satellite Pro M10 P - M 1.3 problems of modems

    I had frozen online when a dial with the modem internal. Cursor froze, programs froze and the task manager would not start icons were both glowing as if sending data modem. I finally pulled the cable modem (icond indicating always send data) and had to power down with the Start button.
    After what happened the recognition of tonality was intermittent and more freeze ups occurred. Finally after doing everything that can be made including replacement drivers, new dial-up connections that I was convinced that it was related software run with a full recovery. Unfortunately, this did not help and I'm starting to think that the modem card has been wiped out. I use Norton Internet Security and I have tried with this option disabled, but this made no difference.
    Sometimes the diagnoses in the Device Manager will read the modem and other times I get error 603 «modem already in use...» "other times I get error 000005aa, but Device Manager still has"no conflict message.
    I am now using a PCMCIA card and try the internal modem that sometimes connects and then goes into freeze mode or deletes the line from time to time. When I stop after trying the internal modem I get quite often the message 'TMEEJM_WND' not repsonding.
    Before you go in get another modem card can anyone suggest anything else. Thanks in advance.

    Hi frank,.

    I think your assessment of the State of your internal modem is correct. As you have tried a complete reinstall of the recovery CD, then it must be the case that the modem is indeed broken.

    If the laptop is still within its warranty period then I suggest contacting a Service partner to fix it. If the warranty has expired so why not continue to use the PCMCIA card as a cheaper option.

  • Error A10 AMR Modem satellite

    Hello
    I use a laptop Toshiba Satellite A10. I came across a problem a few days back when I tried to connect to the internet through modem dialup.

    Modem has dialed the number, but after checking the user name and password, there was an error describing "cannot connect because a on your system design no function" under the title of "the network protocol configuration error '.

    Could someone guide me how can I fix these settings?

    Kind regards

    Faiza

    If I were you I would try following:

    Remove the connection distance of your network connections and remove your modem from the hardware Manager. Then restart your operating system and let windows reinstall the modem device.

    Create a connection by modem to the modem installed fresh and that's it.

    Please give some feedback if it didn t work.

    Welcome them

  • Problem of modem A30-port could not be opened...

    Hi all
    I have a Satellite A30 here and I can't get the modem to work. I tried to uninstall the drivers and download and run the drivers from the toshiba web site. (mdm-sa30-xp-31116all5 - gb.zip)

    The modem gets versions and automatically installed by Win XP... (He uses the right drivers?)

    When I query the modem, I get the error message:
    "The port that the modem is attatched could not be opened. This could be the result of a hardware conflict. Check the Device Manager to verify that all devices are functional.

    It uses com 1 now it was com3 and com 1 was used next to him. Now he doesn't.

    I have not yet tried a hyperterminal test.

    I think that this problem is not too uncommon that I already found a few comments on various forums about this, but so far all troubleshooting tips didn't work.

    This laptop have nokia PC suite installed and has been set up to connect to the internet via GPRS via mobile before and probably using the mobile as a modem also... I think that might have something to do with my problem...

    All comments will be welcome

    Thanks in advance

    2-6

    HI 2-6

    Can you please tell me what is listed in the phone and modem options in the Modem tab? Normally, the Toshiba software modem is detected to use COM3 port.

    If I understand you right you use portable too for internet connection. Mobile phone should also be which are listed there. Which port to use mobile phone? Have you ever tried to remove all and first of all once again reinstall modem TOSHIBA after mobile phone?

  • Problem of modem with Sat Pro. M35E

    I received a Satellite Pro M35E (exact model code: PSM35E-002EE-AR) of a colleague, who complained that his modem after you download the XP SP1, stopped working.

    Here are my findings:

    1 no errors in Device Manager.

    2. When you go to Modem Properties-Diagnostics-Query Modem, I get an error, "the port that the modem is connected not could be opened. This can be the result of a hardware conflict. Check the Device Manager to verify that all devices are functional. »

    3. no resource conflicts. Modem use IRQ 11, which is shared by different devices, 10 in total.

    4 modem driver from the original CD is correctly installed.

    5 tried to download the latest drivers from the website and install them without any distinguishable problem.

    6 tried to change your modem COM port, but he also gave the same error.

    7A ran the restore original & reinstalled Windows XP SP2 CD, nothing helps.

    Appreciate any help you can give me. Thank you.

    Hey there,

    The error message "the port that the modem is connected not could be opened. This can be the result of a hardware conflict. Check the Device Manager to verify that all devices work. "means that there is fault with the modem and it's a hw fault. You will need to take it to an ASP or you will need to discuss with the support center.

    Concerning

  • Cannot install the Modem Satellite Pro A200 XP driver

    I'm a local network for Newbold College administrator. New mobile A200 and we need XP Pro on some of them. I tried to install the modem driver as one of the last drivers downloaded from the website of European support. I also tried the Canadian site as well.

    The driver installation program does not appear to do anything. I tried to manually install the driver for a Windows modem Agse/Toshiba software modem, but I have com port problems and I can not quire of the modem.

    Can someone help me please!

    Hello

    What to say; I checked the driver Toshiba Europe page and found all the drivers XP necessary and important for the Satellite Pro A200.

    Please note that the European driver Toshiba page provides drivers XP 3 different satellite Pro A200 series! There are PSAE1, PSAE4 and PSAE7 series.
    Please choose the right!

    In addition, you will find a txt file of installation instruction on the page of Tosh.
    In this file, you will find a good and important driver installation order! Please follow these steps!

    I put t know exactly why you get the modem com port problems but I guess a new installation of XP and the driver should fix this strange problem.

    Good luck

Maybe you are looking for

  • New Airport Extreme

    I want to Exchange my old AE for a new on my PC using windows 10. Unfortunately, Airport utility does not pick up my new AE to allow me to do something with it. Any help would be appreciated thanks.

  • VAC converter for rhapsody

    Rhapsody stopped all of a sudden to convert my itunes ACC files when I try to load them onto my Sansa Fuse; always been able to transfer before.  I screwed up something and can't seem to locate the problem, any ideas? Thank you! J & L

  • It is possible to specify a different directory URL service for a lobby phone?

    Hello We have a 7841 configured as phone Hall. Now, we want to allow visitors to search Director of extensions only. I can create another directory server so that it contains only the extensions. But I'm not sure if we can specify different URLS for

  • Pretreatment... ARG!

    Hi all I've searched and searched, but I can't seem to find the answer to my problem. I'm using eclipse 3.5 classic with the blackberry 1.1.2 plugin. I try only include code for jre 4.6 and upwards (more precisely, newly added MathUtilities stuff): #

  • my pc requires a Setup disk

    I have a hp invent G3001.UK, and something happened to my pc. When I turn it on, she prays for an installation disc. I didn't and I can't get my pc to the screen asking without it. Help!