Problem of monitor cable

Similar Questions

• Problem of monitor 2311Hb with power lead sparks

  Hello

  I have a 2311Hb monitor, which has a noise of fissing of sparks where the cable connects to the rear of the monitor, is it a problem with lead or terminal? Introduce a had a similar problem, it stops if I touch the lead but begins again at random,

  I also tried to find the service tag was not on the unit has therefore Dell search which gave a number that says that the system is not valid! Any ideas.

  Sincerely

  Alexim

  Hi Alexim,

  Welcome to the community.

  It can be caused by the cable being loose. However, we can isolate if there is a problem with the cable socket on the monitor or power using a different power cord.

  If possible, check with a power cord different (there could be similar cord used on Tower system) and let know us the results of the same so we can advise you further.

  Thanks and greetings
  Sandeep P
  #iworkfordell

• How to fix it. Problem of "Serial Cable using IrDA Protocol" it says Code 43 I use window XP

  How to fix it.  Problem of "Serial Cable using IrDA Protocol" it says Code 43 I use window XP I have no idea what the point is that the origin of the problem. Is there a link I can go to-to solve this problem? Thank you in advance.

  Yes, just right click on the device in Device Manager and select uninstall.  When you restart, Windows can detect the device and try to reinstall.  If the error is returned, post back - if this error is related to a laptop that has an infra-red (IR) integrated connector, you can disable this device in the BIOS.

• This computer has an add-in graphics card and the monitor cable is plugged into the integrated video connector.

  I tried to connect a new TV to my 8700 with HDMI and I get this message:

  This computer has an add-in graphics card and the monitor cable is plugged into the integrated video connector.

  1. power off the computer
  2. plug the cable from the monitor into the graphics add-in card connector. This may require a video card or the video adapter cable.
  3. turn on the computer

  I unplugged from the back of the computer and put it in my drive macbook & blu - ray. Both worked.

  I tried to find a solution to this already, but none really helped.

  Thank you.

  You need a video card, not the port on your computer HDMI connection:

  

• MAC mini (late 2012) OS 10.11.6 intermittently has no video. CK of hardware is ok. Computer chimes and the light, no video. Close and wait a while for the most part solves the problem. Monitor is ok.

  Mac mini (late 2012) OS 10.11.6 intermittent video on turn on. Only when you quickly turn off. Lights, chime occurs, but the video remains black. Monitor is ok. Usually can recover if it is closed for a while, then restarted. Verification of the material is good. (extended) First aid disk shows no problem.

  Any ideas?

  Have you tried another cable?

  Another monitor?

• HP Pavilion a6750f: problem dual monitor (Second monitor not detected in DVI input)

  Hello everyone, I'm going to by a problem of not being able to setp toward the top of my second monitor.

  I own a HP Pavilion a6750f with an ATI Radeon HD 3200 card on board running on Windows 7 Ultimate 64 bit operating system.  In the back, I have two VGA and DVI inputs, VGA works, but when I connect the other monitor which is connected to a DVI adapter on the back, Windows does not detect any.

  I tried to go the DVI adapter to the other monitor and noticed that it refuses to work. I will note that my display drivers are all updated and I activated the option of customization to detect the second monitor, nothing shows up, it will not be the same acknolowdge that there are several screens.

  I think it's weird that I don't see this problem being issued when I was searching for a resolution on google for hours now. If someone can help me here please I would be very happy.

  Just to remind you try to connect a VGA (analog) monitor to a DVI - D (digital only) output on the computer. This is never going to work as analog and digital are two completely different incompatible signalling methods. With the help of an adapter DVI / VGA passive is the problem that these cards may work with DVI - I or DVI - A output... not DVI - D.

  Wikipedia - DVI;

  "More digital, the DVI connector includes pins that carry an analog signal compatible with RGBHV signals in a VGA connector. This allows a VGA monitor be connected to a passive adapter and offers a universal solution for the DVI interface. The analog pins are the four that surround the apartment or cross the blade as shown on the right side of the diagrams below. »

  

  8 analog vertical sync

  C1 - analog Red
  C2 - analog Green
  C3 - blue analog
  C4 - analog horizontal sync
  C5 - analog ground

  Note the absence of the pins on your computer and your so-called card C1, C2, C3 and C4. Without these pins is not just going to work. Still, there is no way to get an analog VGA monitor to work with your digital DVI - D only output using a so-called DVI - D to VGA. You may be able to buy an asset DVI - D to VGA Converter, but this will be expensive and cannot provide a poor video image quality.

  As you said, the HP f1703 monitor supports only VGA. However, based on the specifications, your HP w2207h 22 inch LCD monitor supports the entry to a VGA and a HDMI input. HDMI and DVI - D share the same signage and using a HDMI-DVI cable or adapter HDMI-DVI and HDMI Cable will solve your problem. For two monitors running on your computer, please connect as follows:

  Computer > HDMI-DVI cable or adapter HDMI-DVI and HDMI Cable > HP w2207h monitor

  Computer > VGA cable > HP f1703 monitor

  Please send Bravo

• problem with monitor and system

  the power light is on, but the system is unresponsive and freezes until it can I do to solve this problem

  Hello

  BTW, if the monitor is separate from the computer (not a laptop) then check the cables
  at both ends - drop, and then hang them up in case there is a connection problem.

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• HP Envy Sleekbook 6-1111nr: Monitor cable defective?

  Hello

  So I repair many conputers and this is the first time that I have encountered this problem and I'm looking for some advice.

  I bought this laptop with a broken screen and I'm trying to fix buit I have an inssue.

  When I connect the new monitor to the laptop I can see the backlight of the screen lights up, if I can manöver screen so I can see I also have a picture of reguklar. The screen seems so very well.

  When I try to put the screen in its place to screw it into the screen becomes black. If I apply some pressure or pass the wire in a certain position, the image will be back. I don't think that the wire pins are clicking in the new screen. I tried little Ribbon for pressure and which seem to help at first but after 10 minutes of use that it happened again.

  I replaced a certain monitors before and I never ran on this question, I usually just pop nine in and its fine.

  Do you think the connector on the side of the laptop could be broken or possibly the new monitor side. Any help would be great,

  Michael

  Hey @MichaelTunison ,

  You can order here. Set of cable panel display 686592-001, or you can call Customer service 1-800-227-8164.

  I hope this helps.

  Thank you.

• XPS13 external monitor cable (9350)

  I just took delivery of a 9350, to replace my 9343 problem and it has a different external monitor connector: shot of lightning-3? USB - C?

  Does anyone know if regular USB Type-C to HDMI cable work?

  Thank you.

  Hey Kevin,

  Yes, you can use USB Type-C ordinary to a HDMI cable. Click on the link for the cable on the Dell Web site

• Problem UZ2715H monitor: current input synchronization is not supported...

  Can someone help me with this problem? -"Current input synchronization is not supported by the display. Please change your entry in 1920x1080@60hz or any other listed monitor calendar date according to the characteristics of the monitor. "I get this message when I run a game (for example I always get this message with CS GO), there are a few games that works fine however.

  I have Nvidia GTX 580 graphics card, windows 7 64 bit, so my pc and the monitor are connected with DVI - VGA (for the pc) adapter and VGA cable to the monitor.

  I tried to update the drivers for graphics cards, changing the resolution of 1920 x 1080 60 hz troubleshooting display... still the same problem...

  Any solution will be appreciated.

  Ok. A DVI to VGA adapter will not work. DVI cannot convert to RFP via a straight through cable. So, your only option is this =
  Computer DVI GTX 580 on-->--> UZ2715H HDMI DVI to HDMI Cable to

• U2713HM monitor - cable DVI standard / max resolution

  Hello.  I just received a U2713HM monitor (from the output of Dell) and connected to my video card (ATI Radeon HD 5450 in a desktop Dell Studio XPS 8100) with the supplied DVI cable.  I am allowed to select the maximum resolution (2560 x 1440) but when I do all past "fuzzy" and "pixelated" in white.  If I lower the resolution 1920 x 1080 then everything works fine.

  A little on my own, including a few similar questions posted here, I think that my video card should certainly support 2560 x 1440, via the DVI port but that the cable delivered with my monitor is a single instead of double link link (I checked this in another post on this forum that included a photo of what single bond and double connectors look like) , and that the double bond is necessary to get the max resolution works correctly?

  I you'd be grateful if someone could please confirm my assumption of what's going on and also cables dual link DVI should come standard (through the output also) with U2713HM in view of its resolution monitor?  Or is there any other question that I'm not aware of that could cause this problem instead?

  Thank you very much.

  Technical contact Dell Support. Tell them that making Dell sent you incorrect wiring for your monitor U2713HM. Provide your monitor e-mail, service tag address number, delivery address, telephone number. Ask them to set one up in order to send you the following missing cables:
  Cable HCX4X or DL DVI - D MPGMR
  DN137 VGA cable
  Cable USB3.0 PN81N

• TECRA M1 problem - external monitor ressolution

  I have Toshiba tecra m1 laptop and I plugged in the vga cable external monitor LG W2252TE. The ressolution fixed by the graphics card on the external monitor's maximum: 1280 X 1024, I wanto ressolution on 1680 x 1050 pourdefinir, because it is an optimal ressolutin through my monitor. My vga display the 4:3 format, but my monior is 16:9. How I can change this ressolution, it is possible to rewrite the friv graphics card and ressolutin added?, my graphics card: Trident XP4m32

  Hello

  First of all, you must check if the graphics card chip allows and support your favorite external resolution.
  According to the information in the user manual (which can be downloaded from the Toshiba page) this resolution are supported by a graphics chip:

  640 x 480
  800 x 600
  1024 x 768
  1280 x 1024
  1600 x 1200
  1920 x 1440
  2048 x 1534

  Unfortunately 1680 x 1050 is not mentioned and I doubt you had the choice.
  Also very important is the graphics card driver. If the driver doesn't include such a resolution then it will appear in the graphics card settings and you might not choose it.

• Thunderbolt and MagSafe 2 combined for non-Apple monitor cable?

  I use my Macbook Pro with a monitor of LG 34UC97 with connection Thunderbolt. Is it possible to get a Thunderbolt cable and MagSafe 2 combined as that provided with the Thunderbolt Apple monitor, and, if so, it will work with the LG monitor? My goal is to use the wire, rather than two, to the Macbook and the connection of the screen.

  I don't believe it.  The built-in Apple cable is their unique design.

• Satellite C660D-101-PSC0UE-00Q017GE - need to monitor cable

  I'm looking for the cable of the monitor for this laptop. Anyone know how to find the model of the cable without having to open the laptop?

  How to find this cable?

  Well, all compatible Toshiba laptop parts can be ordered from the local Toshiba service partner.
  The ASP in your country can supply all the parts.

  On the other hand I googled and found the part number: K000125900 or P0114128

  This s cable a LCD screen compatible with different laptops computers Toshiba and C660 series

• problems connecting monitor to display windows xp

  I'm having a hard time getting my computer to connect to a monitor or projector.  When connected to a monitor, audio works fine, but the video shows that the static image of my desktop wallpaper.  I hear that I am currently running programs, but I can't see on the screen of the monitor.  The computer is running Windows XP.  I fiddled with color, screen resolution, refresh rate, and nothing changes.  I know the monitor works because my other computer that is running Windows Vista, works fine with it.  Suggestions?  The computer has an Intel Graphics Media Accelerator reader for mobile.

  Hello

  Check if the computer matches that of material for multiple monitors, you can check the link below: hardware configuration required for the display Support in Windows XP: http://support.microsoft.com/kb/296538

  You can also access the links below: how to configure and use multiple monitors in Windows XP: http://support.microsoft.com/kb/307873

  Resources for troubleshooting problems in Windows XP: http://support.microsoft.com/kb/307960