Problem of numbers

Similar Questions

• Problem of numbered list in InDesign using paragraph Styles Code syntax highlighter

  Styles using GREP in the options of styles paragraph that I managed to make it useful, HTML, CSS, and Javascript, styles of syntax highlighter.

  Code can be copied and pasted, or can be typed and styles work well. .

  My only problem is with the numbering.

  I've implemented a character list ordered for my type of chip.

  Although the size of characters must be greater than the size of the code in order to get the character bar to connect and be a solid line.

  Is there a way to have the same size font for the numbering and the code and a bar of character which will connect? Do not be destroyed, because the separator between the numbered lines and the code?

  Also it doesn't seem to be a way to change the color or the weight of the bar (it must be the same color as the number) with a bar automatically generate? Is it possible?

  Here is an example of my InDesign CC 2015.4 German I did with a numbered list numbering and bar with a shading of paragraph:

  

  

  

  Note that the width of the 'bar' would change, if you change the width of the text block.

  5 mm added to the width of the text block:

  

  Or would disappear.

  The original text frame width less 5 mm:

  

  Kind regards
  Uwe

• Problem under numbers of filters

  I use the numbers on OSX El Capitan.  I imported a large .csv file that has been downloaded.  When I select the filters it don't show me any options data in the rows. For example, a category called Christmas in the spreadsheet with multiple entries does not appear as a filter option.

  can you post a screenshot?

• Problem printing numbers with the typewriter tool

  After using the typewriter with Adobe Acrobat Pro tool, fine print letters and numbers will not display.  I tried all methods of printing, I know, that is, with comments, document, etc.  always without punctuation or numbers will be displayed.  Help, please

  It's weird. As can test, you try priting to another printer, even if it's just the Acrobat printer?

• Problem of NUMBERS in PL/SQL data type

  DECLARE

  num_ NUMBER (5.2);

  BEGIN

  num_: = 7555.554;

  dbms_output.put_line (num_);

  END;

  I had a mistake in this program. How can I fix this and what is the theory for it?

  Thanks in advance.

  Hello

  NUMBER (5, 2) means the number can have 5 digits, of which 2 are after the comma.  Don't let that 5-2 = 3 digits before the comma, and the largest NUMBER, you can store is 999.99.

  Is there a reason to limit the number of digits?  If so, change the definition of ISSUE (6, 2) or (7, 3) to avoid rounding 7555.554.  If you have no reason to limit the number of digits, just a NUMBER, like this:

  DECLARE

  num_ NUMBER;

  BEGIN

  ...

  Post edited by: FrankKulash
  Changed (6, 3) to (7: 3) after the message below.

• Timer and problems (decimal) numbers

  Hello
  
  What should seem fairly simple seems completely ruin.
  
  I create a timer that takes place every 10th of a second, that I need this amount of precision.
  
  The code I have is:
  
  
  var titleTimer:Timer = new Timer (100);
  
  Start the timer for flicking splash
  titleTimer.start ();
  titleTimer.addEventListener (TimerEvent.TIMER, flicker);
  
  parts twinkle function
  flicker of function (event: TimerEvent): void
  {
  titleCounter += event.target.delay / 1000;
  trace (titleCounter);
  
  }
  
  
  
  
  The result I get is something like this:
  0.1
  0.2
  0.30000000000000004
  0.4
  0.5
  0.6
  0.7
  0.7999999999999999
  0.8999999999999999
  0.9999999999999999
  1.0999999999999999
  1.2
  1.3
  1.4000000000000001
  1.5000000000000002
  1.6000000000000003
  1.7000000000000004
  1.8000000000000005
  1.9000000000000006
  2.0000000000000004
  2.1000000000000005
  2.2000000000000006
  2.3000000000000007
  2.400000000000001
  2.500000000000001
  2.600000000000001
  2.700000000000001
  2.800000000000001
  2.9000000000000012
  3.0000000000000013
  3.1000000000000014
  3.2000000000000015
  3.3000000000000016
  3.4000000000000017
  3.5000000000000018
  3.600000000000002
  3.700000000000002
  3.800000000000002
  3.900000000000002
  4.000000000000002
  4.100000000000001
  4.200000000000001
  4.300000000000001
  4.4
  4.5
  
  When I want to:
  
  0.1
  0.2
  0.3
  0.4
  0.5
  0.6
  0.7
  0.8
  0.9
  1.0
  1.1
  1.2
  1.3
  1.4
  
  etc. etc...
  
  Not 1 million decimal after.
  
  Anyone know how to fix this?
  
  Thanks in advance for any help!
  
  Lee

  then use:

• Text field: add sequential numbers after text

  Hello

  I am working on a form using Acrobat Pro XI. I need complete one of my fields (called order) with something similar to an invoice number, where I have several letters followed a digit it increments of 1 by clicking on a button:

  VS001

  VS002

  VS003...

  I have a button that says increments number; what I want to know is how to precede letters (immutable).

  The code for this button is:

  this.getField("Order").value = Number (this.getField("Orden").value) + 1;

  Right now I'm using two adjacent fields where we take the letters and the other has the sequence numbers, but I encountered the following problem:

  -Numbers do not show the zeros not significant (it indicates VS4 instead of VS004)

  I would like a more elegant solution, where a single field would be needed, if possible.

  How could that be achieved?

  Thank you kindly.

  You can use something like this:

  var text = this.getField("Order").value;

  var str is "000" + ((text.substr(-3)) + 1 Number);.

  this.getField("Order").value = text.substr (0, 2) + str.substr(-3);

• InDesign CC: Numbering not updated chapters

  I read this...

  http://forums.Adobe.com/message/5536663

  And determined that I have could be faced with a similar problem. I have two different templates.

  Master A - chapter Pages - I use for the chapter title pages where the margins are slightly different. It is also the number of the corresponding chapter to disaplyed.

  Master B - body Pages - this is where I have the copy of body of my chapters. for example H2 hollow H6, standard paragraph, figure lists, references, etc.

  

  All my chapters are built this way. Including my annexes.

  Heres my book page numbering options...

  

  Each chapter is showing as "Insert here the title of Chapter 1.

  

  The chapter preceding is infact Chapter 2 deployment.

  This is the Style of the chapter number, or positions - chapter title (H1)

  You will see that I attributed a particular list for numbers to use. It was titled "Chapters" under lists.

  

  My question is...

  What happens becase I use two different text blocks in my Masters? You can see what my page .indd structure looks like in the screenshot of pages.

  My references figure take the chapter number, I guess because the chapter numbers are not updated. Is this true?

  How can I fix without having to redo the master-A pages or using a simple master page layout?

  Any help is ALWAYS appreciated and thanks for your time.

  Here's an idea of my book structure.

  

  Aaaaaaaaand I think that I fixed it...

  Steps to solve down

  

  

  

  I corrected the page options nubering for each document. Still nothing. Checked the substitutions and styles. Authorized Overrirdes. And that looked like, he had to start work and then I rememebered sometimes assignments may cause problems with numbers. Then I checked each document, erased again substitutions (manually... thank you Adobe for the actions Palette) so I ran chapter numbers all update and Pará, and... * Taaaaaa Daaaa * for this worked.

  Thank you all for your help and your patience so I worked through this. We have some people who work on the document, otherwise I would not have done assignemnts this early in the project.

  Thanks again.

  The possible sollutions are...

  1. Check your document page numbering options.
  2. Check your Styles and your lists.
  3. Make sure your models are "contuning to the previous" in the numbering section.
  4. Make sure you have your assignments checked or not related.
  5. Check that you have not applied for substitutions. If you erase them.
  6. Run "Update all numbers" or "chapter numbers and paragraph update" after you have everything checked.

  Thanks again!

• Book of 10 with several files frame crashing when I change the numbering at the level of the book.

  I built a picture book (image 10) with several files from a variety of books. The files have inlays of text and references to breast and between chapters. When I go to set the numbering at the level of the book - as soon as I click on the Numbering dialog box Set - Framework breaks down and I get an internal error 10024, 6382424, 6369627, 6383085. I have attached a screenshot.

  I take the files on the book and added back in. These files worked fine in the original books, that I copied them from. I can't get the book to number correctly. Help, please.

  Hi, Estelle,.

  Don't know if this is relevant to what you are feeling, but...

  I've encountered similar problems of numbering with several of my books.

  What fixed it finally for me, is that I discovered that some files were overrides of paragraph style (not necessarily related to positions or section heads.

  Once I removed all replacements of these files, numbering issues have been resolved.

  While I use the plugin Tools section , you can scan your files for the substitutions with built-in FM find/replace.

  Kind regards

  Amitai Sela

  Philips Healthcare

• Problem of Panel of information in Adobe Illustrator

  Hi all

  When open the information panel in adobe Illustrator get question marks instead of numbers as shown in the picture... in all cases and with all the documents even when I use the measure tool...

  I'm having this problem with Illustrator CS4 and continues wit CS5 too...

  Info in photoshop Panel works very well...

  I tried to change the locale of the system for non-unicode programs, but no change...

  tried to look for a solution here and on google... can't find anything about this

  I would be so grateful for any ideas that may help me solve this problem

  Thanks in advance

  

  Oh, I see... In my view, it is a known problem with the ME version. Try to set your system language to English or Arabic expanded with the support of the Western / Latin characters. As far as I understand it, it is simply a problem of numbers in your fonts in Arabic and the program cannot make it because they are then more West / Latin fonts.

  Mylenium

• Can't draw the text box on MasterPage for the numbering of the pages

  I'm spending PageMaker in InDesign CS4. I have a problem of numbering of the pages in my document of 50 pages. I have facing pages and was able to draw a text box on the left side of my Master Page (A) to insert numbers. I now have numbers, that is, 2, 4, 6, etc., printing on the left side of my document pages. (Not sure why paging was applied only to the left.) I was not able to draw a text box on the right side of the Master Page (A) while I can number the odd document pages, if this is the way to go. The right text box does not consume. I googled the problem and tried several different methods, but can not get to the right page numbers. Any help would be appreciated. Uh oh, I fear the saying "you can't teach an old dog monkey" may be applicable.

  Zoom out until you see Master left and right Page (easier is to hit Alt + Ctrl + 0: 'Fit spread in window' in the view menu).

  Copy the box with the page number, you already have and paste it immediately - it should appear somewhere in the neighborhood of the center of your screen.

  Select it with the black arrow (not the white or the text tool) and slide it into place on the right page.

  If this does not work, call back

• OfficeJet pro 8500: print heads and things

  OK, maybe it's a bit confusing. I have three printers Officejet 8500. No. 1 went into a never-ending cycle of clean print heads (after more than 30,000 pages) and without me being in the room the right side of the printer depot of ink on the table. Tried the reset but not good. Bought a second hand and after a few weeks, it came in paper jam mode. Could not resolve so finally bought number three. Works a treat and has no problem. Numbers one and two are for recycling. Print heads removed and stored in an airtight box with damp cloth. What is staging. Now after spending all that money, the last thing I want, it's having problems with number three. However, I have three cartridge sets new and unopened from PC World (their own brand) which cost £39. They came with the number two of the machine. They are not dated and has no way to know at what age they are. They are not oem, I can't any advice on their likely performance, but what worries me, is can the ink begins to solidify and block print heads as they age? Like I said they are still sealed. If I change the cartridge and use a spare set of the print heads to check the print output and that something is wrong if I can swap cartridges and print heads back without the printer enter the cycle of constant head cleaning. I know there have been issues with these printers but mine is on 27 000 pages and all tests are reports back in good health. I have also several chips of HP cartridges genuine that I can use.  Sorry as that a little long-winded.

  Hello @notahappybunny,

  Welcome to the forums of HP.

  I understand that you have some questions and concerns about your ink cartridges non OEM 8500 and some.

  I would like to help.

  The following document explains on the expiry of the ink.

  Consumable inkjet HP - ink Expiration

  From what I've read, it's I think I understand that the ink may change over time.

  Because ink is sealed I don't think they're going to solidify, but the pigment used in the ink may eventually separate from water. This will certainly cause print quality problems.

  In addition, your first 8500 printhead might not be good.

  A bad print head may cause the impression of entering the cycle without end cleaning.

  I hope that I have answered your question.

• SPA-3102 PSTN idle status, will not answer but watch sounds.

  Greetings,

  I am a complete newbie in the world of voip. I have an spa3102 and a computer virtual trixbox. When I use my softphone to compose, it makes to the spa3102 (shows the id of the last and gives a status of the appellant voip 'reply') but I get an "all circuits are busy now" and does not change the status of IDLE pstn. It also will not answer the phone for incoming calls to the PSTN.

  Outgoing stuff could be a problem of numbering plan (don't know not just guessing) here it is:

  (S0:xx. <@gw0>)

  I tried the regular (or default) (xx).

  incoming calls are supposed to go to a handset on my desk, for example ext 101 is the dial plan: (S0:101@internalip)

  I can't see the forest for the trees. Can someone give me some advice on where to look. I'm completely puzzled by something non-response externally, and why I get a all circuits are busy if there are inactive on the status page.

  an interesting note: If line1 is connected to an analog phone, it will dial a number, but always shows failover for a reason any...

  Thank you very much!!!

  Greetings!

  Thanks for the reply. I do not know if I explained properly (sounds like I don't have). I have a trixbox and I use the SPA in interface with my RTC and I want to have a fax machine (but later) on the FXS port. The problem I have is that I could not field calls to the collection. They would just ring and ring. I thought it was a dial plan (and hope it was not a hardware problem), but he just wouldn't answer the phone. He would show 'Ringing' like the PSTN status, but Voip would be "IDLE". I've been pouring through the guide of the administrator, forum messages for about 2 weeks now.

  But I didn't know what the problem was. The spa3102 is waiting until she can establish a connection (with the internal phone system) until it meets the PSTN. This is why it continues to ring. The problem why it shows it is inactive and (even with enabled full logging to a syslog box) no traffic to SIP the trixbox internal... because I had the port internal plugged in... not the WAN port (or internet). Thats right... silly me...

  I gave the wan port an address on the same subnet and moved the cable to it, once I could talk to her I change address internal to something even not on my network (if no routing problem) and left the network adapter disconnected (internal nic). Then I changed the wan to the old internal address address (trix trunk was already configured in this ip address anyway...) and PRESTO! I tried calling the number RTC and started to receive log entries showing the sip signaling and he's trying to route the call to the box of trix. It works now! So he was not answering the phone in my case, because it could not connect to the pbx or the ip phone and that because I don't use the WAN/INTERNET port on my SPA. Something I don't remember seeing in the textbooks as a "hafto' or a 'must '... I might have forgotten that of course, but I don't remember seeing him there.

  So if you enable logging, and then call this number (I used the PuTTY and 'tail-f /var/log/spa3102.log"to see the entries that they light up the box of syslog) and you don't see any sip traffic, it could be that you must use the WAN/INTERNET port instead of the internal port apparently logical... BE sure THAT ENABLE YOU REMOTE ADMIN if you decide to give it a shot.

  Also you can do the spa to answer the phone, even if it has no where to send the call (or if you want incoming people to use a PIN) on the GATEWAY PSTN - VOIP, there is a setting "off hook during the VOIP call" (default = no), but change that Yes - he would answer... and then sit there... If I had a PIN with a dial plan that is associated with this would give a fast busy after the entry of the PIN. BUT now everything is cool!

  Thank you!

• Issue number is

  I have a problem with numbers in FM12. I'm trying to get an exit number figure that looks like this: Figure 1.1 - 1.  My numbers are based on the titles.

  Section 1 entry: S: < $chapnum >.

  Section 1 output: 1.

  Section 2 entry: S: < $chapnum >. < n + > < = 0 >

  Section 2-release: 1.1

  Figure of entry: F:Figure < $chapnum > - < n + >:

  Figure out: Figure 1-1:

  For example, if the title 2 is 1.3 then the figure number should be 1.3 - 1. If the title 2 is 6.4 then the figure read number Figure 6.4 - 1.

  Does anyone know how to do this?

  You need to put the numbers in the same series (S) that the topics and Add invisible placeholders (e.g. <> ) in title for the component of the figure tags, for example position figure 2 ' S:Figure <$chapnum>. . <>-". For heading 1 level, you must reset all the tags of less than zero level.

  Search for the method of the matrix automatic numbering on the FM band for more details.

• Two Formats of AutoNumber separate into one Document. Referencing the other Format?

  Hi all

  I've searched and can't find the answer. Since I am fairly new to work with Framemaker, maybe I'm looking in the wrong place.

  I am writing a document that has several sections of teaching steps as well as multiple images in each section.

  Here's how I numbered each section (module) steps:

  M: < n >. < n = 1 > EXAMPLE of OUTPUT = 1.1

  M: < n >. < n + > = 1.2 OUTPUT EXAMPLE

  M: < n >. < n + > = 1.3 OUTPUT EXAMPLE

  I want to AutoNumber images in the referncing sections section number '1' (module), but follow the number with a letter. i.e. 1.A, 1.B, 1.C.

  I am tired of it:

  M: < n >. < A = 1 >

  M: < n >. < A + >

  Unfortunately, once I have add the number format to the image... the steps in the section numbers start counting upward by the amount of images.

  I want to consult issues of step because there are steps that are all of the text and have no images, which require to manually replace the sections without images. If I manually cancel these sections, it defeats the purpose of formatting to help my day smoothly.

  A formula can be written to solve my problem of numbering?  Or am I stuck manually change the numbers on each image?

  Thank you

  Tony ~

  Ah, Yes, good point: you must use chapnum or sectionnum to drive the initial number in both series. Otherwise, for the chapters without images, it wouldn't increment on the series 'I' when it incremented on the series "S".

  But, no, you don't with the same label in the series because they are not the same serieses and (b) they do not have the same number format.

  [Side: there is something to say about the numbers being coupled directly to their not... in this case, you * could * use a single series, adding an alphabetical enumerator at the end of the existing procedure (but not the auto-numbering the steps, of course).] But you wouldn't get the 'County of numbers in the section"that the label of the separate series gets you... Although I'm not sure who you get, in terms of navigation or understanding - I have to assume that numbering sccheme was a management decision, so! ]