Problem of recovery Internet 2002F

Hello

The other day my Macbook Pro A1278 was about to run out of battery, so I plugged in the charger. Almost immediately, the screen went blank and when I restarted it I saw a file flashing with an exclamation mark. I launched the internet (command-r) recovery mode and selected my local wifi network. But after I connect wifi all I get is a rotating globe with the name of wifi under and after 10-15 minutes, I get a globe with one! and I'm told to go on the website of apple with problem 2002F. Can anyone offer advice? I read on another forum that I might have to change my DNS and DHCP using DNSmasq settings but have so far been unable to do. Any help would be greatly appreciated.

Advertisement

See this thread and follow the instructions that are there (with thanks to @ OGELTHORPE)

Tags: Notebooks

Similar Questions

  • I have a frozen screen of Active recovery of white desk with a mouse. I think that the computer is frozen upward with a problem of recovery? Right?

    I have a frozen screen of Active recovery of white desk with a mouse.  I think that the computer is frozen upward with a problem of recovery? Right?

    How can I fix?

    Hello
    • What were the changes made before the problem occurred?

    You can try to restart the computer and check if it helps.

    If above does not help, you can read the following steps to disable the active desktop on the computer and check:

    a. to disable Active Desktop.
    b. right click on an area empty office, point to Active Desktop, and then click view as Web Page to clear the check box.
  • Problems with the internet connection, Aspire V15 - V3 - 575G

    Hi, I bought a new laptop and have problems with the internet connection without having to install other programs.

    The problems are the following:

    • I use an ethernet cable to connect and just after passing on the laptop, there is no Internet connection at all. I have to restart the router to do.
    • When downloading or uploading brokes down at intervals of 30 seconds - 1 minute. It is not always the same. Sometimes it works 3 minutes, but it is not enough.

    He has Win10... With my old laptop with Win7, I had no such problems. I do not change ISP.

    I don't know what to do to fix it. I have not tried to uninstall Acer applications yet. Have you experienced something similar?

    Thank you very much for the reply.

    Plese try this:

    device, right-click on your network card Realtek Manager choose uninstall and tick to uninstall the software if requested, restart, and then try again to install the downloaded driver.

  • Unable to connect to the internet using my cable broadband from sky. He said that there is a problem with your internet connection.

    original title: connection to the sky

    Hi I have a dell Inspiron mini and when I put my sky broadband cable said inside connected to the internet, but when I opened a page it says there is a problem with your internet or something.i have also the wireless network connection, but I think one of my kids messed with the parameter as , I can't use the wireless setting now.so if anyone has any answers I would be grateful.

    Hi Kerry,

    I would recommend contacting Sky support with their internet service:
    One thing, you can try on your own is following the instructions in this Microsoft article and running the Fixit tool:
    I hope this helps.
  • I installed AVG 9.0 and now I get the following MSN Explorer pop up of message.__You are unable to connect to your e-mail server. There may be a problem with your Internet connection, or a problem with the mail server. Pleas try again.

    I installed AVG 9.0 and now I get the MSN Explorer pop next message.
    You can not connect to your mail server. There may be a problem with your Internet connection, or a problem with the mail server. Pleas try again.

    Sure.  Analysis of your e-mail anti-virus program:

    • Can slow to receive and send messages, or even fail.
    • Can damage files of storage for messages that you've already sent and received, making it inaccessible messages.
    • Is not necessary.  If you receive an infected attachment and try to open it, the protective device in real time of your antivirus program will block the infection.

    Here are a few web pages accurately:

    Why you don't need your anti-virus program to scan your e-mail
    The other threat email: the Corruption of files in Outlook Express
    Why some antivirus software can change the settings in e-mail programs
    Email scanning - advantages and disadvantages

  • When I start my computer I get the message "Windows Live Mesh, there might be a problem with your internet connection make sure computer connection and try again, I run Windows Vista"

    I run Windows Vista.   Recently on commissioning the first thing that appears on my screen is a 'Windows Live Mesh' message, "there could be a problem with your internet connection.

    connection.   Ensure that the computer is connected to the internet and try again".

    My computer is connected to the internet, and it works very well.   How can I get rid of this annoying message.

    I tried all means to find this file on my computer, but it does not appear to be

    Can you help me please

    Mike Gray

    Hello


    Were there any changes (hardware or software) to the computer before the show?

    Perform the check and the boot if the problem persists.

    To help resolve the error and other messages, you can start Windows XP, Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

    Note: Follow step 7 to reset the computer to start as usual after the boot process.

    Hope that helps.
  • Problems with WMC Internet TV (Beta) in Vista 32-bit last month.

    Okay, so for those of you who have read my previous posts on Windows Media Center related problems involving the Internet TV beta edition, you know, I've had difficulties to find a fix for a specific problem where Internet TV will not download and gives the error, "No valid, impossible to launch Application" «...» »

    So a few weeks back I found a good deal on a new material and thought I would upgrade my system to a dual core to Hexa core with a new motherboard with AMD 870/850 chipset.  I added some ram DDR3 and low and behold, when I ran my system I have not had any unexpected problems when you use Windows Media Center to which has been about a month now.  That is, until today!  When exactly the same problem happened when I look one online using WMC Internet TV (beta) news.  The error just after I saw a report, at the start of the Internet TV to connect to the next story in the list after I was watching the story I wanted to.  I clicked on the button back in the upper left corner and the second that I did, my screen instead of going back to the next menu, frozen, and then the blue circle came for about 10 seconds.  I was wondering what was the program, and then the exact error even I had before with my old dual core card mother system returned to the top on the screen and it (until) worked normally.

    Conclusion... no matter what Internet TV (beta) is when it is the transfer of information from the internet to the computer, is likely to damage the hardware.  The solution is to buy a new system, which I strongly think that Microsoft should pay back stop (especially when the review is pretty well the whole computer) when it occurs.

    Except of course swaping on hardware is just one of a few ways to fix the same problem, which I see no answers for in all other positions on the issue.

    Hi JohnDR,

    1. What is the full exact error message that you receive?

    It is possible that some third-party programs installed on the computer is causing the problem.

    I suggest that you perform a clean boot and check.

    To help resolve the error and other messages, you can start Windows Vista by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

    See the link below to learn more about how to clean boot.

    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

    http://support.Microsoft.com/kb/929135

    Reset the computer to start as usual

    When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

    (a) click Start, type msconfig in the search box and press ENTER.

    (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

    (c) under the general tab, click the Normal startup option, and then click OK.

    (d) when you are prompted to restart the computer, click on restart.

    I hope this helps!

    Halima S - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • DV 6-6170 ee problem with recovery partition

    my restore partition does not work when I try to start by F11 shows a partition allocation failed message, I did an extra partiton tool so when the problem of recovery occurred I removed this partition and when I tried to set the partition as active I can't rely on it because it is disabled.

    in the window manager, that it shows that I have 4 partitions C, system recovery, Hp tools is true and how do I reactivate my recovery to work properly, please advice me.

    After you apply the changes - restart the laptop at least once. Then, stop and restart after 1 minute - press F11 to check if the recovery work.

  • Problem connecting to internet 'network unidentified. "

    Original title: remove corrupt card WIRELESS

    Problem connecting to internet. My current tinkering is to disable the Intel network card, reactivate, and I connected. However, when I restart, the change is lost and the network icon shows no access, and offers connections that do not work. I guess that somewhere in the registry is the "unidentified network" below.

    The network page shows the connection contains two networks, the right most "unidentified network".  I tried to review or delete this without success.

    When I connect as long as user admin, the connection is present and working.

    How is - a change the connections?

    Hello

    Please contact Microsoft Community. I appreciate your efforts to solve this problem, I'll probably help you solve this problem.

    To better understand the issue, I would need more information on your side.

    1. What is the brand and model of the computer?
    2. You are using a wired or wireless network?

    This problem might have occurred because of these reasons:

    1. Corrupt drivers.
    2. Incorrect settings.

    Try the steps listed here:

    Method 1:
    I suggest you to perform network troubleshooting and check if it helps. It will help resolve common network connectivity errors.

    Network convenience stores
    http://Windows.Microsoft.com/en-us/Windows7/open-networking-troubleshooters

    Method 2:
    If the problem persists, I suggest to try the procedure described in the following article and check if it helps.

    Why can't connect me to a network?
    http://Windows.Microsoft.com/en-us/Windows/cant-connect-to-network#1TC=Windows-7

    Check out the link for more information.

    Wireless and wired network problems
    http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-7&V1H=win81tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

    Hope this information helps. Reply to the post with an up-to-date report of the issue so that we can help you further.

  • Problems with our internet connection

    Hello, I have a all in one HP touchsmart PC (running windows 7), and he has problems with our internet connection. I dot know if it is in the right section, but this seems to be the best in the class.

    The rest of my house to connect to our router fine (iphone, iPad, computer laptop) except this PC. I CAN connect to the router, but 5 minutes or later, he has a X red on the connection and said "the settings saved on this computer do not match the requirements for the network" I looked everywhere online for this, but it remains stubbornly disconnects every time.

    I tried to delete the network and try again, but he still has a red X and the message more each time. I tried to connect and Ethernet cable, still no luck. I am very desperate to solve this problem, because it's what I use for games. Can someone help me please? It would mean the world to me if someone could help me solve this problem.

    If you don't mind keeping this Ethernet cable connected, you might have a solid connection if you come to turn off the wifi connection completely and rely only on the cable.

    Here's how:

    1. Press on + R to display the run box, type ncpa.cpl , and then press OK.
    2. Right click on the wireless network connection and choose disable.

    That's all.  You can always reactivate if you wish.

  • Problem with receiving Internet in Inspiron 3847?

    My computer is a Dell Inspiron 3847, and I noticed internet connect seems to disconnect sometimes. The only way to fix this is by unplugging completely reconnect. This isn't a problem with my internet because it only happened on my laptop. It usually happens when downloading games. I could do to solve this problem?

    Hello

    Please try in safe mode with network.

    Update BIOS and drivers. Clear the boxes for power management.

    Concerning

  • Tecra M8-S8011X - a few problems after recovery

    Hello

    I was wondering if anyone can help.
    This has been driving me crazy for a few weeks now.

    I have the above model and will give it to my cousin who start College and used the recovery DVDs created when I bought it all first to restore the system to a fresh out of the box state.

    The installation went well, I was invited for two recovery DVDs. The DVD Apps & drivers has not been requested or necessary.

    At the first boot of Windows XP but I had a few problems - every time Windows starts up I get a box with the title 'WARNING' and the message: ' cannot Access Volume Control! "my only choice is to hit"OK ".

    In fact all of the sound card is not found at all - in device manager only codecs are listed under devices Audio Audio Realtek High definition or whatever it is supposed to be is not listed at all - no exclamation point, no Red Cross, the system can't even it's supposed to be there.

    I tried to re - install the driver by downloading it from the site, tried DVD drivers, tried to install it manually too Toshiba and Apps... Nothing - the system never recognize it - so I have no sound.

    Also first when Windows starts the "new hardware device" Assistant come to ask to install drivers for a "PCI memory controller" - I did this 'automatically' and manually and connected to the internet and it even manually to the file where I extracted the driver files for the Intel chipset (also downloaded from the page download driver model) - manually but it always ended said that he did find the correct drivers for the hardware...

    Just for the heck of it I have re-directed the recovery discs from scratch in case something was wrong the first time - but it's the same exact results... I find myself with no noise, the error of the volume control and the list in Device Manager that the PCI memory controller cannot start becaue it doesn't have the correct drivers.

    The only information listed under it is:
    Feature: unknown
    Manufacturer: unknown
    Location: PCI Bus 2, device 0, function 0

    Any help would be greatly appreciated, thank you!

    Hello

    All I think that this is not a European model of Toshiba and that is why I first know whether the Win XP should be preinstalled.
    I think that the Vista must be preinstalled and that is why I am asking about the Win XP on this laptop however

    Just something about your problems;
    The audio problem is known to me using Win XP.
    Needs 2 Realtek sound card windows XP hotfixes/patches.
    You need to first install the AUDIO KB888111 patch before KB835221 will follow you with the Realtek audio driver installation.

    According to the memory controller PCI.
    This feature is supported only by the Vista operating system and therefore the Win XP drivers are not available

    Welcome them

  • Problem with recovery Partition(After i got a Virus)

    Hi all

    I use HP Envy 15 laptop with windows 7 Home premium x 64 bit installed. I don't create the recovery discs since I've had this laptop and what happened is that I had a virus on the internet but I have fixed almost all the defects of the system caused by the latter, but the main problem for me, is that it changes all the Player main file name in Virus1232 for example (d:\recovery converted d:\virus1234) and I spent hours on the internet for the names of folders and files right and I got them all but only a single file, not sure. My problem is when I enter the Recovery Manager it detects none my recovery partition (but the virus is not responsible for any deletion of file it just caused some change system) and just to talk I've also corrected the names of folders and files in the c: drive, since they are necessary also.

    What are the names of files I got in the D: drive: bootmgr - BT_HP.flg - CSP. DAT - DeployRp.log - HPSF_Rep.txt - language.ini. and let him file name is the one im not sure of: "HP_WSD.dat" (it's a file of size zero).

    The recoverymgrdump.txt just works & "leaving CSBRMgr::GetRPTOOLPartIndex!
    then he said to me:

    "Win32 System Info Code = 3, Message Info = the system does not have the specified path."

    and he also said:

    "CSBRMgr::HpcdFlgIsExistInUP : \WINDOWS\hpdrcu.prc does not exist."

    I don't know if this is normal, but also the deployrp.log gives me this error:

    "The package does not exist: c:\RM\Tools\DeployRp\WinPE_LangPacks\64\winpe-setup.cab.

    of course there are errors more in both files, but I guess that those who are the most important.


    So my question is: the attributes of file in the d: drive would be responsible for this error (I changed all the attributes to be hidden and read-only system)

    OR

    If anyone has a solution please tell me what to do.

    Thank you.


    You are the best to order that a set of recovery disks from HP, doi a full restore using those.

    You can order here recovery media

    http://support.HP.com/us-en/document/c00810334

    .

    Or call HP on the phone to order a set.

    U.S..
    http://welcome.HP.com/country/us/en/contact_us.html

    Everywhere else
    http://welcome.HP.com/country/us/en/wwcontact_us.html

  • Problem backup recovery image on USB - recognizes no not my USB after inserting

    Hello

    I watched the video and read the instructions to create a collection on

    http://support.HP.com/us-en/document/c03481733

    and did the following:

    1. Closed all programs and disconnected from the Internet;
    2. Wanted for HP Recovery Manager on the splash screen;
    3. Clicked on "Create recovery media" when the box of HP Recovery Manager came;
    4. Checked 'I agree' and click 'continue' on the next screen;
    5. Insert a USB Flash drive into one of the USB ports.
    6. A window pops up showing immediately that the USB Flash drive came with a SanDisk SecureAccess software;
    7. Closed the window without activating it / install the software.
    8. A noted USB Flash control box lights and a circle trotted under the three boxes supports
    9. Disconnected the USB Flash key;
    10. Insert the USB Flash drive to the two other USB ports and repeat all the steps and got the same results.

    Here are the details of my laptop and a USB Flash drive:

    Laptop HP Pavilion g

    Windows 8 (64-bit)

    SanDisk Ultra USB Flash Drive

    32 GB

    Software compatibility: Windows XP, Windows Vista, Windows 7, Mac OS X v10.5 +.

    I checked with success a recovery image on a SanDisk 32 GB USB Flash Drive for my other front HP laptop with no problems at all.  Given that the USB Flash drive is not longer than 32 GB and is not Compatible Windows 8, I don't know why it did not work this time.

    The only thing is I don't remember if my other SanDisk Flash Drive USB provided with the SanDisk SecureAcess software.   This is why the process has failed?  If so, USB Flash Drive which brand is a good option?

    Thank you.

    Hello anita1wu. I understand that you have recovery problems with your USB SanDisk player. I will answer all of your questions for you both:

    1 SanDisk has always be my brand name 'To Go' because it lacks never me, that is until now.  Could you recommend me a reliable brand?

    -Technically, I would suggest to buy HP USB sticks. However, in the end regardless. A 32 GB HP USB is essentially identical to a 32 GB USB Lexmark.

    2. am I correct that regardless of the brand name, I have to avoid getting a USB Flash drive that comes with a secure, or any software or features additional 'bonus '?

    -C' is correct. With a view to the recovery process, you don't want anything on the drive that could take place. In addition, a recovery drive must contain only the relevant recovery software. Something else may have conflicts later.

    I would like to know if this answers your questions, and if you have any other questions. I'm only here to help!

    Mario

  • How know if the router or modem cable is the problem with bad internet?

    I have intermittent problems of internet home.  The internet goes out for very short periods, then back on several times a day. At various periods of time, usually in bunches up.  Then sometimes instead of being down for maybe a normal 15-30 seconds, it could last 5-20 minutes.  And there are also periods of hours sometimes where the speed is VERY slow.

    When he is not at all working, Airport utility looks like in the following screenshot, with the orange Internet and other green devices.  Sometimes, it only shows the Internet icon and light, with nothing else underneath.  If the internet is very slow (and I mean really slow, like minute 2 page load or not at all), everything is green, including the Internet icon.

    It is the Charter cable with a modem surfboard, connected to an older Airport Extreme (in mode not wireless) model, which is connected to three aircraft from the airport, you can see in the screenshot.  Everything works very well for 8 years, but these problems have taken place in recent months. I replaced since the cable modem for a brand new, I have reset the Airport Extreme to the factory settings and tried all sorts of other things.

    It isn't the wireless aspect, because I can connect a computer to the ethernet jack and it has the same problems.

    So here's what I want to know: is there a way I can tell if it's the Airport Extreme or if it's the Internet Charter being flaky?  (I know it's not the cable modem because it does the same thing that before I replaced it).  I just want to isolate the problem. I don't want to succumb to Charter calling again, as we think the run around, I'm going to forward all tech would come home, and they never admits to have flaky internet.

    I bought a bolt of lightning to Gigabit Ethernet Adapter so I can plug my Macbook Air directly into the cable modem, without going through the Airport Extreme, but internet is not stay down long enough for me to access, plug it in and reboot the cable modem.   Frustrating.

    Suggest that you connect the MacBook Air directly to the modem, connect the Mac to the Internet and keep an eye on the MacBook Air from time to time for at least one day complete.  A few days would be even better, if possible.

    If the connection remains strong during your 'test', based on other information that you provide as...

    connected to an older model Airport Extreme

    and

    Everything works very well for 8 years

    The first thought that comes to mind is that life expectancy, on average, for airport routers is about 5 years. It's on food, on average, at the start of the descent position.  Momentary grave start occurring, and the drops will increase in frequency over time.

    It is a bet of $20, but you might consider replacing the external power for AirPort Extreme see if that provides any assistance.  This does nothing for the internal power inside the airport of course components.

    http://www.eBay.com/ITM/original-OEM-Apple-Airport-Extreme-Base-Station-power-Su PPLY-AC-ADAPTER-A1202 370810566512.

Maybe you are looking for

  • Pair of M30 - 604 with installing identical software - Modem gets Error 633

    Hello I have a pair of Satellite M30 604 s running Microsoft Windows XP SP2, the same Office 2003 Enterprise, Norton SystemWorks 2005 software. All was well at least the last 6 months. I recently installed Norton GoBack part of SystemWorks, this may

  • How to convert a text file to a time signal

    I am confused on how to do it. I can get the text file to read properly in a table (orange wire), but how do I become a time signal (thick brown wire)? I have all the data points and I know that the sampling frequency is of 2 samples per second. Any

  • OfficeJet 6600 paper jam won't clear

    I have a HP Officejet 6600 e-all-in-one printer and got a paper jam the other day, but even after removing the paper, I keep getting an error message saying remove the rear access panel and remove any paper. The jammed paper is not tear or rip so the

  • Can't open Malwarebytes Anti-Malware Run time eorror 383 prgram

    I try to open the program called Malwarebytes Anti-Malware and will come "" Run time error 383 "

  • No touch or digitizer after upgrade W10 on Aspire R7

    I just put Aspire R7 my daughter (15) windows 10. All is well except that the contact and the active digitizer not working. In Device Manager, everything looks good (no warning), under Interface devices, I have an element of HID compatible touch scre