Problem of Simulation collector design & control

Similar Questions

• Problems with the help of control Edit Expression with tab control

  Hi all

  I am facing a strange problem when using Expression Edit Control with a tab control.

  When I put the Expression of the RichEdit controls on several tabs in a tab control, and when I run the application, the Expression Edit controls in a single tab are visible, others get invisible! I do NOTHING with them, but they do not simply show upward!

  I first faced this problem using Expr editing controls in Visual Studio c#. NET - with tab controls. For verification, I created a simple VI is LabVIEW to see if the problem is with my request / problem with Expression Edit controls in c#, etc. But voila!  A similar behavior in LabVIEW too! 

  I'm doing something wrong? OR do not do something right? Ask someone for help please ASAP!

  Thanks a ton in advance!

  DASI

  PS: Attached the VI here (LabVIEW 8.5) just download and run it, and you will see probably what I'm talking about!

  
  

• Problems with delays of parental control and activity reports in Windows 8 PC

  The family safety team has identified two problems for people using parental controls in Windows 8:

  ·         Time stop working

  or

  ·         Parents receive reports of activities that have no PC activity, even if children are using the PC. (Use and web application use is still reported, but the chart for PC time used is empty.)

  I had the same problem (s).

  Finally fixed it.

  The child user account must have the PC 'trust' in relation to the windows live account online restored. Connect you to the computer with the user account does not. By scanning or the mouse, click on the right side.

  'Settings', "Change PC settings" "sync settings" "passwords" "trust this PC.

  You will need to have a code sent to your mobile phone or the phone at home or email.

  Once the code is entered and verified, the PC is now in 'Trusted PC (s)' account online windows live.

  This must be done on each user and each PC that does not work.

  Good luck, hope this helps other parents. I was pulling my hair out with this not working do not. Time limits is the best thing in the WORLD, as long as it works!

  Sorry kids, no more free time on my watch!

• Problem of sound recording volume control

  I just installed a USB turntable and I have a problem: when I go to control panel, sounds and devices, click the Audio tab, in the field of sound recording, the volume button is gray out and inactive. The turntable is the record - but it's a recording at a too low volume and I would like to increase the volume. But with the Volume key is inactive, I am unable to do so. How can I increase the volume of the sound recording if this button is disabled? Thanks in advnace for your answer.

  Hello

  I suggest you follow the troubleshooting steps form the article and check if it helps.

  How to troubleshoot sound problems in Windows XP

  http://support.Microsoft.com/kb/307918/en-GB

  See also:

  No sound in Windows

  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

• I work with a third-party provider that adds agricultural markets that will update every 10 minutes on my site of muse. I'm a designer by trade, and they are the html code. They have problems with my original design elements being pushed around when they

  I work with a third-party provider that adds agricultural markets that will update every 10 minutes on my site of muse. I'm a designer by trade, and they are the html code. They have problems with my original design elements being pushed around when they add the js include. They recommend at this time that I use another program like Wordpress, but I won't do that, because a large part of the site is designed and just add the markets. Here is the link to the site. At this point, the home page is the question. I can also provide a screen shot of how markets are supposed to look like

  This part does not seem too difficult.

  I bet they are now trying to "knit" their share of data right in your Muse- generated page, and they tell you that your code is terrible (and their smells like daisies). The usual clash...

  But it might be easier for you (and many others) if they offer their content as a separate page of small, so you can incorporate it as an iframe tag in an HTML object in Muse. No matter what code for permission to host the iframe, could be inserted as a simple script in Panel of Options of Page of Muse.

• I have problems to install CS6 Design & Web Premium. From the CD, the Setup program crashes or he tells me it's a forgery (it isn't). In the Web download file, I can't even extract. I get an error of access violation.

  I have problems to install CS6 Design & Web Premium. From the CD, the Setup program crashes or he tells me it's a forgery (it isn't). In the Web download file, I can't even extract. I get an error of access violation. I'm on a Surface Pro Windows 3.

  Solution posted in duplicate message I'm having various problems installation CS6 Design & Web Premium. From the CD, the Setup program crashes or he tells me it's a forgery (it isn't). In the Web download file, I can't even extract. I get an error of access violation. -This message of locking... MOD

  To contact our support staff, you must click on the following link: https://helpx.adobe.com/contact.html

  In at top right, sign in to adobe.com with your Adobe ID

  Select the category of assistance you need and once completed, you will see the blue band that still says "need help, contact us.

  A click on that and you should see options to chat/phone.

• Problem of Simulation multivibrator

  Hello

  I'm trying to simulate a simple multivibrator which I intend to use it to generate a square wave. I use this circuit:

  

  I think that there is no problem with this circuit. Almost everywhere, I found this structure.

  In virtually, the tour starts to work because of differences in the elements. Circuit was symmetrical, he started working in the simulation. To work around this problem, I tried to:

  * Initailze one of the capacitor

  Change of values of transistors Bf

  * Take one of them as 2N2222A and other BC107

  * Connect a picewise voltage source linear to transmit a transistor turned out (such as the creation of a) of pulse

  But none of them worked.

  Some of them seems to be working. But the output signal is very different from the square wave.  (Similar to a square wave noise )

  How can I solve this problem?

  Thank you very much

  Try this in Multisim 10. Your collector resistances are far too high in the resistance. You must also select 'Set zero' for the initial conditions and integration "Gear" in the options analysis. You can add your own PB and LED.

• problem of sliding iPad Pro Control Center.

  I can't always drag up the control center with my new iPad (always within 14 days) Pro. This happens only in portrait mode and only over the side of the "home" button (if I rotate it 180degrees it works fine, but then the notification Center does not work on the side of the "home" button.)

  After a hard reset, it started to work again, only to stop a few minutes. Initially, I bought he kept not only work in certain applications (http://bit.ly/joc0zm and Safari) but now it seems stop working everywhere.

  Someone at - it; She has known/fixed this? I guess it was a hardware problem, if it wasn't for the fact that a reset can fix it for a while.

  I have the same problem.  When the control center will not slide up, the notification Center also didn't slide once down.  Any solution?

• by using labview co-simulation, how to control the PWM market factor in multisim

  I am new to the use of Multisim with LabVIEW using co-simulation. I would like to ask if there is a PWM component in Multisim, which can have its cycle have to be controlled using LabVIEW? I have an algorithm in LabVIEW that returns the duty cycle values between 0 and 1, representing the percentage of duty cycle.

  How can I control the PWM market factor in Multisim using LabVIEW co-simulation?

  Thank you very much

  SPECTRUM

  Hi spectrum,

  In Multisim, find items based on functionality, there are some PWM models in the database.  Take a look at this knowledge base if you don't know how to search for parts:

  http://digital.NI.com/public.nsf/allkb/7309A5CABC677296862577ED006EC99E

  Also, take a look at this knowledge base:

  http://digital.NI.com/public.nsf/allkb/EF391C48CF71AE4F862571B900644F84

  This article shows you how you can get Mutlisim and LabVIEW to co-simiualte:

  http://www.NI.com/white-paper/13663/en

  I hope this helps

• Problems with the buttons that control the volume

  Hello everyone I hope you can help me. I had to reinstall the system on my laptop, everything is ok except for a problem, the software that controls the volume buttons are not displayed. If the work on screen, but I can't see if the volume or bass.
  Could you tell me what might happen. Thanks and forgive the inconvenience.

  Hi all I have solved the problem, as I'd mentioned the error is when you install the drivers and the order in which they are installed.

  First of all, install the file shortcut (8jvu20ww.exe)
  Once installed, you will be prompted to restart the system. Do not.
  Then install (g1ku20ww.exe) power management.
  Reinicir system and the problem is solved.
  A welcome message.

• Problem of Earth / Circuit Design

  Dear community,

  in advance, I thank you, I hope this is the right place to ask this kind of question.

  I would like to design a very small preamplifier pre - one preamplifier because it is mounted on the head of the insect to behave and a later analog frontend for the conditioning of signals and an additional gain. Unfortunately, I have major problems with respect to the ground.

  Please see the attached PDF file:

  (1) the preamplifier must be supplied with a supply separate power source such as a battery. as I need a dual power supply, I would use just two batteries connect them in series and take right in the middle like that is usually connected to the GND pin 0V? so in this case I would connect the preamplifier power supply 0V to the same connection as REF?

  (2) the shield of the cable from the head to the preamplifier should be connected for the Earth also the chassis of the preamplifier. In this case, I would like to use the net power to which I have access to the preamp power which is made with normal voltage rectifier/regulators (I know that there are missing parts )

  the 0V of the preamp power supply should be linked to the mass of the filter etc. steps that finally end in the GND to my A/D card of NEITHER? right?

  (3) now, I have to admitt that I did not the differential amplifier in scene myself and it actually makes me a problem because here's an op amp used to excite the input of the differential amplifier and this op amp is that related to these TWO grounds: the virtual mass to the head and the GND AI through the op amp. I unfortunately have no idea what this op amp is doing?

  So, it would be great if someone could tell me if my grounding considerations are right especially with (AI GND) and what does the op amp out and if I should use referenced asymmetrical pattern of NRSE.

  ManyManyMany thanks to you all,.

  Yours,

  Prefrontal

  Thank you!

  Kind regards

  Prefrontal

• Problem of UAC (user account control)

  I've had this problem for quite a while now, and it's really fustrating. I can't download anything without the UAC (user account control) asking me to enter my administrator password. I know, but, in the UAC dialog box, I do not see where to enter it. Problem with UAC, impossible to make changes to my laptop. I can't change my security settings, download from the internet...  Please help me

  Hello

  You can enable UAC who do a lot.

  You can also enable the UAC SILENCER or STOP if it lowers you the level of security.

  THIS UTILITY MAKES IT EASY TO

  http://www.tweak-UAC.com/
  Tweak UAC utility - easily put UAC into Silent Mode or POWER

  --------------------------------------------------------

  To solve the problems:

  Try these and it can also be a good idea to update your main drivers later. The General corruption can also play a
  role in this issue. And even the TCP/IP stack might need to be refreshed. References to Vista also apply to the
  Windows 7.

  What antivirus/antispyware/security products do you have on the machine? Be one you ALREADY had on this
  machine, including those you have uninstalled (they leave leftovers behind which can cause strange problems).

  If no joy there's something blocking perhaps.

  Start - All Programs - Accessories - System Tools - IE with no Addons - what works best?

  IE - Tools - Internet Options - Advanced - tab click on restore, and then click Reset - apply / OK

  IE - Tools - Internet Options - Security tab - click on reset all default areas - apply / OK

  Close and restart IE or IE with no addons

  not better?

  IE - tools - manage Addons (for sure disable SSV2 if it is there, it is no longer necessary but Java always install
  "(and it causes problems - you never update Java to go back in and turn it off again)." Search for other possible problems.

  Windows Defender - tools - software explore - look for problems with programs that do not look right. Permit
  are usually OK and "unauthorized" are not always bad. If in doubt about a program to ask about it here.

  Could be that a BHO - BHOremover - free - standalone program, needs no installation, download and run - not all
  are bad, but some can cause your question (toolbars are BHO).
  http://securityxploded.com/bhoremover.php

  Startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  Also get Malwarebytes - free - use as scanner only.

  http://www.Malwarebytes.org/

  --------------------------------

  Try these to erase corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ==========================================

  If necessary:

  To make another account with your same password - ADMIN upgrade - REBOOT (do not only closing session) and
  connect that account - you can download to use it? (do both ADMIN - one accounts in case that you
  migrate to it and another to test and difficulty).

  It while in the new use of the account to LOWER your account regularly APPLY / OK to need - and then lift back
  for the ADMIN - repeat several times - descent - go downstairs - raise - repeat. This allows to clear corruption.
  Make sure that the account administrator.

  Try your downloads into the new account.

  If necessary later this is the process to fix a damaged account or migrate to a new.

  Difficulty of a corrupted user profile
  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  ---------------------------------------------------------------------------------------

  Then connect to the old account and try these to erase corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• Problems with Simulator SDK 10.2

  Greetings to everyone. I have problem with the display of text in the Simulator. Here is my configuration:

  -BB SDK 10.2.1

  -Simulator 10.2.0.1443

  -Windows 7 Ultimate, 64-bit 6.1.7601, Service Pack 1

  -VMWare Player 3.0.1

  -VmWare Workstation 7.0.1

  -Virtualization is enabled in the BIOS

  Anyone know the source of this problem? Thank you.

  

  Cool!

  Just a wild guess but maybe a VM corrupted or Simulator.

  Have you tried running on another machine or download again the sim card?

• Custom designed control

  Is there an example on how to create a custom control drawn? I found nothing.

  The only thing I could find was on creating custom components QML which are really just composit controls with no custom drawing. It is located here

  Need us a drawn custom control. I could not find any property of the class "CustomControl" that would allow me to draw directly on the surface of the control.

  Normally - you can draw using various drawing functions, put the pieces of images, fill areas etc...

  Is this possible and if so - what someone have more information?

  Thank you.

  It seems that there is a way to do this after all. It is a bit complicated and not documented, but it can be done.

  In short - we can lets paint everything using the QImage QPainter and then use the QImage to create the Image that can be used for example in ImageView.

  QImage is not on the list of classes in the section of Qt stunts, but I found the following post which started me in the right direction.

  http://supportforums.BlackBerry.com/T5/Cascades-development-knowledge/using-Qimage-and-qpainter-to-P...

  You cannot use the sample above that he is, however. The code example has been removed from the GitHub. The reason is mostl ikely class PixelBufferData, which has been removed in the latest version.

  You can use the new ImageData class however. I tested it and could do what I wanted to use QPainter.

  An example on how to get the ImageData of QImage is help for the ImageData found here class

  It is GREAT - especially for people like me who are coming from the world of Qt with the ability to use QImage and other Qt classes. I think that stunts for Qt support should be as broad as possible. I would have preferred Qt Creator instead of the eclipse in the ide in first class for the cascades, but that's a topic for another day...

  I hope this helps someone the similar problem.

  If this post you - help please like him. If she answered your question - please accept as solution - thanks.

• debugging problems of Simulator 9100

  I join a simulator course, 9100, Eclipse api 1.1, 5.0.

  I'm getting something I can set breakpoints, but it's in a weird State.

  When the debugger is endearing, it says it can't find the rim cldc and modules of system operating with debug info.

  When I look in the directory of Simulator, they are, under the Debug dir, here:

  C:\Program Files (x 86) \Research in Motion\BlackBerry Smartphone simulators (9100)\Debug\net_rim_cldc-1.debug 5.0.0\5.0.0.676

  (and the largest number of files).

  So when my application appear in the debugger, I can see local variables, but not in

  the battery, in one of the api.

  The app is not properly, but I can't debug without resolving it.

  I don't have this problem when I join other simulators.

  What could be wrong?

  Thank you

  lucidbee.

  I think it was a problem of process.

  After downloading a new Simulator, I have to quit and restart Eclipse.

  Then I can select the Simulator in debugging or running again and this

  problem goes away.