Problem of startup and shutdown classes

Similar Questions

• Windows Vista cannot see this background image instead, I see a solid blue color during startup and shutdown

  original title: background logon of windows vista I do not see this background image instead, I see a solid blue color during startup and shutdown

  I use a laptop with windows vista home basic 32-bit sp2

  After turning on the computer laptop, I get a prompt to enter the password at this point, I would usually get a background image and the same background image appeared when I stopped

  I do not see this background image instead, I see a blue solid color when you start and stop as the background image has been replaced by a blue color

  I followed all the steps of the following

  http://www.howtogeek.com/HOWTO/Windows-Vista/customize-your-Windows-Vista-logon-screen/

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-desktop/can-you-customize-the-logon-screen/75def0ce-2dc4-48c1-B290-daaf685efca4

  http://www.Vistax64.com/tutorials/79886-logon-screen-change.html

  However, I don't see the background image. the background image is in the right folder location whith the required size as jpg image with the exact registry required such as mentioned in the above links entries

  How do I solve this problem

  Hello

  Did you do changes on the computer before the show?

  You can try the steps and check if you are able to see the background on the logon screen.
  a. Click Start, and then type gpedit.msc
  b. navigate to Computer Configuration and go to administrative templates and go to System.
  c. go to connection and set the "bottom always use custom logon" to activate.
  d. create a folder named C:\Windows\System32\oobe\info\backgrounds
  e. put the file you want, and then name it backgroundDefault.jpg
  f. check your other background for the dimensioning of the info files

• IOP startup and shutdown as windows services

  Hello
  
  Is there a way we could have IOP startup and shutdown as long as services beats windows instead of run the files?
  
  Thank you
  Hari dewyse

  Yes. You can install IOP as service NT and power there.

  Please see "Integrated planning as an NT Service operational facility" in the IOP installation guide.

• Windows 8 Super slow startup and Shutdown/Restart custom - fixed! -Contains the fix!

  Hi, drew here

  I had problems with my windows 8 23 "inches lenovo AIO C540, we got it in may, account of my mom and my account are both connected to a Microsoft account, but my sister is not, he used to about 8 months ago take only 10 seconds to connect and start all startup programs, but now it takes forever!" It takes less time to connect to my sisters account a minute now, but will not completely boot on my account or my mother (used to start Skype and other programs).
  Fixed - look down below
  Please someone help me a lot thank you, Drew Tavares
  
  
  Link to the Lenovo C540 (I have the best model)
  Difficulty
  
  These are viruses that when was deleted and that fixed my computer ^.
  Program Files (x86)\WebCake\WebCakeIEClient.dll
  AppData\Local\Temp\toolbar34801781.exe
  Delete all of the listed files or run a scan with your antivirus program startup

  Hello

  First check to see if any hardware is not available - if she tries to initialize or
  material which has problems, it may take a long time to start.

  Check with Lenovo support, their drivers and documentation online and ask for their
  Forums about known problems.

  Support from Lenovo and downloads
  http://www-307.IBM.com/PC/support/site.WSS/homeLenovo.do

  Lenovo forums
  http://forums.Lenovo.com/

  ============

  These should help:

  Ways to improve the performance of your PC
  http://Windows.Microsoft.com/en-us/Windows-8/improve-PC-performance

  Maintenance & performance
  http://Windows.Microsoft.com/en-us/Windows/performance-maintenance-help#performance-maintenance-help=Windows-8&V2H=win7tab1&V3H=winvistatab1

  Crashes Windows or freezes
  http://support.Microsoft.com/kb/2681286

  =======================================================

  You use a 3rd party antivirus/antispyware/security program? If so many people
  can cause slow start from the bottom.

  Check with the support of the system Maker (manufacturer of motherboard for customized systems), their
  online resources and the drivers and ask questions in the forums about known problems.
  Updating the BIOS , drivers of low level chipset and embedded and separate major
  device drivers (anyone who can have an impact on the speed of startup and performance).

  Note the use of Win Key + X and Win Key + W (to go on the Control Panel, Run and parameters
  According to needs). Win + D key calls the office and using Win Key active / disable the office and
  Splash screen.

  Check startup programs.

  Right-click in the left lower corner - Manager of tasks
  Or Windows key + X - Manager of tasks
  Or right click on the taskbar - task manager

  Check the Startup tab.

  More troubleshooting:

  How to perform a clean boot for a problem in Windows Vista, Windows 7,
  or Windows 8
  http://support.Microsoft.com/kb/929135

  Other programs to help:

  Autoruns - free - see what programs are configured to start automatically
  When your system boots and you connect. Autoruns also shows you the complete list
  locations of registry and files where applications can configure start automatic settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Explorer - free - find out what files, registry keys, and other objects
  processes have open, which DLLs they have loaded and more. This unique
  powerful utility will show you even owned by each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  =======================================================

  If necessary:

  Try to do a "Refresh your PC without affecting your files" (or modification of your personal data
  settings) or even a restore. Be prepared to re - install the programs, applications will remain.
  And having redundant backups of your files on the disk main hard is always a
  good idea.

  Windows 8 includes special discount methods (keep files and settings) or a reset
  (new installation remove all).

  How to restore, refresh or reset your PC
  http://Windows.Microsoft.com/en-us/Windows-8/restore-refresh-reset-PC

  How to create a system image to refresh your PC in Windows 8
  http://support.Microsoft.com/kb/2748351

  How to update Windows 8
  http://www.eightforums.com/tutorials/2293-refresh-Windows-8-a.html

  How to reset Windows 8
  http://www.eightforums.com/tutorials/2302-reset-Windows-8-a.html

  If you need a repair disc:

  Create a system repair disc
  http://Windows.Microsoft.com/en-us/Windows7/create-a-system-repair-disc

  How to create a "system repair disc" (CD/DVD) in Windows 8
  http://www.eightforums.com/tutorials/2855-system-repair-disc-create-Windows-8-a.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Pavilion Notebook PC 15-079er: problems with sleep and shutdown 15-n079er HP Pavilion Notebook PC.

  Hello world

  I have a huge problem with my Pavilion. I used Windows 8.1 earlier, and I decided to upgrade to Windows 10. I did not like something (can't remember what) and decided to return to Windows 8.1. Almost a year passed, I am again on Windows 10. But if I SLEEP my computer:

  • Screen goes black, everything seems normal.
  • No matter how long wait, fan keeps spinning and power LED, LED Wi - Fi on.
  • Keyboard input does not help. Does not meet what it is.
  • The only thing left to do - stop hard.

  And if I shut down the operating system:

  • Windows normally stops, close all applications, screen goes black.
  • Fan on, led on.

  I did not notice these problems with restarting and the hibernation.

  Two things I've done in this gap of the year:

  • Replacement screen. An old broke. Thanks to my cat...
  • Formatted the drive. I don't think it would do anything diffirent.

  So, any help would be appreciated.

  Thanks in advance,

  Kebab

  Hello

  On some machines, the pilot for 11 series IMEI has been known to cause that kind of question of the judgment, so it may be worth trying an earlier version.

  You can use the following method to install an earlier version of the driver IMEI.

  Download driver IMEI on the link below and save it in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp66001-66500/sp66228.exe

  Disable your wireless card (should be f12 ).

  Open your download folder and run the installer - it warns you that it is an earlier version, but simply continue.

  When finished, restart the laptop.

  If the computer shuts down correctly, turn on your wireless adapter and use the utility on the following link to prevent Windows 10 to update automatically the driver IMEI again.

  https://support.Microsoft.com/en-GB/KB/3073930

  Kind regards

  DP - K

• Problems during startup and disc.sys blue screen

  I got hard to start that a 32-bit Vista computer does not move in front of the black screen, sometimes there is a blinking underscore, or the mobile mouse pointer. Usually I restart with ctrl-alt-del and it works, it takes sometimes a few tries.

  It also seems to start normally when I go out in the inside installation disc, when he's not here it hangs in checking dmi pool Data given, when he asked me to "press any key" If there is a disc inside.

  This happens only when the CD player is first in the boot order, so I change to hard first push which does not start again.

  If someone has encountered this?

  If I get to the connection, everything works very well afterwards.

  I was going to repair the installation disc, but it's moving before the Microsoft corporation at startup loading bar.

  Then, I got a blue screen PAGE_FAULT_IN_NON_PAGED_AREA with Codes and * disk.sys with address

  I tried CHKDSK and last good known Configuration, but nothing helped.

  In addition, it was after I reinstalled from the cd of installation about five days ago everything worked as well the first two days... the only problems I had were with the installation of updates, after I finally installed successfully, it's when, startup problems began.

  Any experience or advice appreciated!

  JMP

  You have two questions.

  1 - associated WRkrn.sys Webroot for Webroot SecureAnywhere I would remove it

  2-drive hardware problem.

  I remove Webroot and go the HD manufacturer download their utility check HD and run it.

  

• Satellite 2450-201: slow startup and shutdown

  I HAVE A SATELLITE 2450-201 AND I RUN ON WINDOWS XP HOME EDITION, I DID A REGISTRY CLEANER EVERYBODYS USERNAME USING REGISTRY FIX 5.5
  I HAVE DEFRAGED MY PC AND ALSO OPTIMIZED MY MSCONFIG STARTUP ITEMS AND EVEN THE BIOS UPDATE.
  THE RESULT IS EXTREMELY FASTER WHEN I CONNECT AND ACTUALLY UNDER WINDOWS BUT THE SAME OLD VERY SLOW STOP AND START TO WHAT I DO.

  THE WINDOWS BAR GOING ALONG AT LEAST 15 - 20 TIMES TO HELP START!

  Hello

  Maybe you've connected to some external devices to slow down the start-up procedure. You can also try to disable all the hardware components you n t need (modem. IrDA). Also check out which device is defined in a first start time (I hope that the HARD drive).

  For slow closing is responsible only running processes that should be forced disconnected. It all depends on your own configuration and you are using external devices.

• Startup and shutdown scripts for Oracle R12 in Windows XP

  I have successfully installed R12.1.1 in Windows XP and connected to the Vision with no problems. But after restarting my PC, I am unable to restart (I don't know how to restart) services.
  I see the other threads that talk about the same scripts in Linux environment.
  If anyone knows - how to start and stop the services of R12 in the Windows environment, please let us know.
  
  Thank you.
  
  Published by: SanDan on July 13, 2012 10:08

  SanDan wrote:
  I have successfully installed R12.1.1 in Windows XP and connected to the Vision with no problems. But after restarting my PC, I am unable to restart (I don't know how to restart) services.
  I see the other threads that talk about the same scripts in Linux environment.
  If anyone knows - how to start and stop the services of R12 in the Windows environment, please let us know.

  Management of server processes
  http://docs.Oracle.com/CD/E18727_01/doc.121/e13675/T530130T530133.htm#5274555

  Thank you
  Hussein

• Lenovo p780 startup and shutdown sound

  Hello!

  How can I change the starting and stopping of Lenovo p780 sounds?

  In fact, I want to disable them, but generally changing, that is the question.

  Perhaps this audio file can be found somewhere on the phone and changed?

  Thank you

  Marcin

  Reach

  -setting

  -all parameters

  -audio profiles

  -general

  -power audiio reading

  see you soon

• Automation of database startup and shutdown of AIX for several databases

  Hi I'm 9i running two databases with oracle different holmes on an AIX server.
  Now to implement the automation of start and stop database, I found the oracle on http://download.oracle.com/docs/html/A96167_01/post-inst.htm#i1035384 documentation.
  
  I'm not sure about step 3
  
  3. Add the dbstart script in the file/etc/inittab:
  
  # mkitab ' oradb:2:wait: / bin/su oradb - c | ' / $ORACLE_HOMES/bin/dbstart.
  
  
  For example my ORACLE_HOME for the 01 database is /ora_01/product/9.2
  and the ORACLE_HOME for the 02 database is /ora_02/product/9.2
  
  I have 2 entries in the initab?
  
  mkitab ' oradb:2:wait: / bin/su oradb-c|/ora_01/product/9.2/bin/dbstart.
  mkitab ' oradb:2:wait: / bin/su oradb-c|/ora_02/product/9.2/bin/dbstart.
  
  
  Thank you

  Hi br00klynZ00

  No doubt dumm, just stupid answers.

  Yes, we should do as root. You are a substitute to oracle ' su - oracle ' so no worries.

  Can we consider this question as answered? ;-)

• Satellite A300-1 b 9 and WXP - cable sound problem at startup

  I desided to "downgrade" from Windows Vista to WXP Pro sindows.
  So, I installed WXP and everything, updated and everything!
  * http://img141.imageshack.us/img141/6448/47371216zy9.jpg

  But I had a wired audio problem at startup:
  "Cannot not be able to control the Volume.
  I downloaded a driver called:
  driver audio Realtek High definition
  I still don't have the same "error" starting :/

  I tried several different audio driver, but I still get the message!
  and what ever I don't... I get this noise... When you boot a computer and then push a lot of buttons...
  a noise comes loke "OOOT" :/
  boring terrifingly.

  Please, anyhelp would be much appreciated.

  Thanks for the comments!

• IDT Audio system tray app has encountered a problem - sttray.exe and lack of Windows\system32\spool\drivers\w32x86\3\DLCJtime.dll entry: RUNDLLEntry at Windows startup.

  Dell Dimension E510 system was crushed by a virus. The files were dumped, authorized reader and a reload fee system has been done. When all files have been charged and the system is recovered, the following errors began to appear at startup:

  -IDT Audio system tray app has encountered a problem - sttray.exe and

  -Windows\system32\spool\drivers\w32x86\3\DLCJtime.dll Missing entry: RUNDLLEntry

  I'd rather be able to clear these by using the operating system disk I hope it do not screw the system. Any ideas would be nice.

  Thank you

  Dennis Holmquist

  Hi Dennis,

  DLCJtime.dll part of your Dell printer drivers. If you have or had a Dell printer, then re - install printer drivers / should solve the problem.

  Reinstall the printer. In addition, install the latest drivers from the manufacturer's Web site.

  To connect a printer directly to your computer

  Remove a printer

  See also:

  Microsoft Windows XP - add a printer attached to your computer

  RUNDLL error message

  For IDT audio error, you can install the latest audio drivers from the Dell support Web site to see if it helps.

• MacBook 3 beeps on startup (and more)

  Friends,

  I had a lot of trouble with my mac from a few months ago.  I first noticed the problem when I take my Macbook Pro in the upper left corner of the base (entering by the ESC key).

  After that I take it, the computer will restart immediately.  It wasn't a huge problem until my laptop started beeping 3 times at startup.  In the end, I thought that it was a situation of RAM, and he just needs to be replaced.  This is my go - to fix if the beeps never started again (which they would be weekly or more).  My problem got worse and worse and the beeps return earlier and faster.  I'm constantly afraid closures hard are eating away at my computer and I don't know what to do.  Every now and then, the aura of bars, crossing, screen to enter the upper left corner.

  Any help is appreciated, I intend to take it in as soon as I get home (I'm a student) but want to see if there is something I can do.  LANDAU has been reset, and all the RAM have been pre-installed.

  I work with a MacBook Pro (13-inch, mid 2012) and El Capitan running.  8 GB 1600 MHz DDR3 RAM that say 'OK' in the diagnosis.

  Thank you guys so much, let me know if I can provide further information.

  Three beeps indicate that RAM is unable or does not, and must be replaced.

  You can run the help Apple Hardware Test - Apple Support

• Compatibility problem with Vista and iTunes

  I downloaded iTunes 9 on my Tobisha laptop Satellite last night and put about 2.5 GB of music on it. I didn't upload the music from the internet. I used MP3s, I had for a few years.

  When I went to boot up the laptop this morning the loading process took some time, but it never loaded to the login screen. I just see the bottom of MicroSoft. Is there a compatibility problem with Vista and iTunes? Maybe I put too much music on my laptop?

  Boot in safe mode and delete iTunes and all the music I downloaded would solve the problem? Or it is less simple than that?

  Don't know where to direct this question if any help you could provide would be greatly appreciated.

  Thank you.

  Hello

  iTunes is compatible with Vista and there should not be any problem.
  Yesterday, I installed iTunes 9 on my U400 and everything happened correctly.
  If your laptop can not boot Vista correctly, then you should try the repair feature.

  Turn on the computer and press F8. Now you will see the advanced boot menu.
  Now, you have many choices.

  As a first step, you should try the option called: last good known Configuration (Advanced)

  If this will not help and the Vista will not start then try the option called repair your computer. This option displays a list of system recovery tools, you can use to repair startup problems, run diagnostics, or restore your system.

  If that does not help, then you will need to retrieve the unit using the Toshiba recovery disc or HARD drive recovery.

• Pavilion 15 laptop: problems with stop and "standby" mode.

  I upgraded from windows 8.1 for windows 64 bit home 10. I had problems with stop and goes into sleep mode and cannot be resolved, then I reinstalled windows 10. Everything worked fine for a few moments, and then the same problem reappeared. I can't stop or put my PC into sleep mode, unless I have first of all to make a restart. After a reboot, I am able to stop or go to sleep mode without problem. If I try to do either without a restart, the screen goes black and the indicator light remains lit. The only way I can get it to start then press on and hold the power button and force a shutdown down, then press the power button to restart the upward. I have another PC, a wafer think that Lenovox has been upgraded to windows Windows 7 10. This PC work fine with windows 10, no problem at all. It's just the HP Pavilion 15 who has these questions. It makes me crazy.

  Look through the tool of troubleshooting possible solutions here:

  http://support.HP.com/us-en/document/c03383935