Problem of the Satellite A100-912 usb external HARD drive

Similar Questions

• Satellite L300-110 USB external hard drive is no longer detected

  I used my external hard drive via a USB connection for a while normally, I wanted to remove most of his files and only keep my important files. After I restarted my laptop it now is no longer detected

  My external hard drive model is HTS54101 0G9SA00
  Connected via a storage drive HARD Portable USB 2.0 Phillips

  The USB ports are ok, I plugged a USB optical mouse through them and it works, and sometimes the LED on the Phillips turns red with still no detection of my laptop.

  Please advise, I lost my mobile hard disk of 100 gega?

  Sounds like the hard drive has failed.

  The only thing I can think that you can try is to update your Chipset drivers. I don't know if this will fix the problem even if, as you have pointed out that the machine can detect other USB devices already.

• Satellite 1800-712 does not recognize my USB external HARD drive

  Hello

  I would really appreciate the help. I own a satellite 1800-712. I have receently bought a usb external hard drive for some extra memory (IE Toshiba MK4026GAX USB Device)

  When I connect it to my usb port it records any with the computer. The green light so there is power to the hard drive. The usb ports recognized of other fine features (a modem and memory stick)

  I tried the external hard drive on a desktop pc and it works fine.

  I have downloaded all windows xp service pack updates and updated my bios. Don't know what to do now.

  Please help and thank you in advance!

  Hello

  Although sometimes, I know that the OS is not able to recognize the external USB device, because the device external USB (HDD) consumes more energy than the 500mA.
  The USB ports provide 500mA power and if the device needs more power so it s is not possible for the Windows operating system to recognize the external device.
  You have an external power supply for the USB HDD? You should use it.

  Good bye

• Seagate FreeAgent GoFlex USB external hard drive problem

  I have a Seagate USB external hard drive. It is loaded with all my pictures and music. I can not open. I did in the past without problem.  It is a Seagate FreeAgent GoFlex. It says that I have the drivers updated. I've started and restarted. uninstalled and installed etc. It's also almost if there is nothing on the disc. When I plug it into the USB port it will not appear in the my computer tab, however, it shows in the toolbar at the bottom as installed but with nothing on it. When I run the troubleshooter, it says that the problem can not be detected, but it also says that the device is functioning properly. I do not know because I can not the specifics to fill. Y at - it somewhere that I can take this drive to see if someone can see if my files are always about this and that so they can transfer to another drive? Help, please!

  [Moved from comments]

  Hi Philippe,.

  Welcome to the Microsoft Community and thank you for the post about it

  It seems that when you connect an external hard drive Seagate USB to your computer, there is no indication in the drive. I appreciate the action that you tried to solve the problem.

  I would like to know the following information.

  (1) what version of Windows is currently installed on your computer?
  (2) have you tried to connect the hard drive to other USB ports?
  (3) you are able to use other USB devices?

  I suggest you to connect the hard drive to another computer and check.

  Your answers are important to us, please write to us with the requested information so that we can help more.

• Computer laptop (Vista) does not take account any new working USB external hard drive

  Hello, I'm under the latest version of Windows Vista Edition Home Premium on a Dell XPS M1210 and spin in the problems with the connection of my second USB external hard drive. In other words, when I plug the drive (a Seagate expansion 1 TB), nothing happens. Literally nothing, no notification of installation of the driver, no sound is played stating that the system recognized the device, no new entry in post working or disk management. I connected this drive on another computer running Windows 7 and it worked without a problem, so I do not suspect the problem to lie in the hard drive, but with my computer. My other external hard drive USB, a Maxtor Basics Portable 250 GB, works perfectly, but there more than two years. I bought the 1 TB Seagate as a backup and an upgrade, but I plan to go back now that there is nothing more than a big black Clipboard with a green LED clear too much room. What can I do about it?

  Hello
   
  Most likely, there is not enough power for the USB port of your machine to the external device do recognize. As a test I would have you test the issue on another USB plug.
   
  I recommend you contact you either OEM (Original Equipment Manufacturer) or the manufacturer of the motherboard if it is a machine of casting House and get the latest chipset drivers for your motherboard.
   
  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly
   
  Aziz Nadeem - Microsoft technical support.

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• Response speed - USB external hard drive

  Hello

  I have W7 Professional (32 bit) installed on an Acer Ferrari 5000 with 4 GB of RAM. I have a 1 TB WD My Book USB external hard drive connected via USB.

  When I access the drive to play an Explorer of W7 film shows my folder & first screen load files instantly, but then the green progress under the full path bar direcory slowly starts to move across the screen and may take up to 3 minutes to stop. Durning his time my pc performace Marc everything stop. The video load but Windows Media Watch does not respond and the hourglass (or a circle in W7) shows the application as it is busy. Finally, video begins to play but jumps several images at once, even if the sound is fine. After about a minute the video started playing at double speed, befire the entire process repeats itself until it catches up with the sound and the video will play very well for about 10 minutes.

  Videos are not damaged (I can play my portable hard drive very well), the device signals healthy in the WD diagnostic tool and the firmare for the device is up to date (on the WD site).

  I see a lot of people in this forum have problems with W7 64 bit, but there is no mention of 32-bit issues. Also there never was problems with the device was detected or is not accessible - gal just access the device. My only job is about from the drive to copy the movie on my laptop and play it from there - which kind of defeated the purpose.

  I left a similar post on the WD website, which so far had no response. Is it a question of W7/USB? Any other ideas would be useful.

  Hello

  I have W7 Professional (32 bit) installed on an Acer Ferrari 5000 with 4 GB of RAM. I have a 1 TB WD My Book USB external hard drive connected via USB.

  When I access the drive to play an Explorer of W7 film shows my folder & first screen load files instantly, but then the green progress under the full path bar direcory slowly starts to move across the screen and may take up to 3 minutes to stop. Durning his time my pc performace Marc everything stop. The video load but Windows Media Watch does not respond and the hourglass (or a circle in W7) shows the application as it is busy. Finally, video begins to play but jumps several images at once, even if the sound is fine. After about a minute the video started playing at double speed, befire the entire process repeats itself until it catches up with the sound and the video will play very well for about 10 minutes.

  Videos are not damaged (I can play my portable hard drive very well), the device signals healthy in the WD diagnostic tool and the firmare for the device is up to date (on the WD site).

  I see a lot of people in this forum have problems with W7 64 bit, but there is no mention of 32-bit issues. Also there never was problems with the device was detected or is not accessible - gal just access the device. My only job is about from the drive to copy the movie on my laptop and play it from there - which kind of defeated the purpose.

  I left a similar post on the WD website, which so far had no response. Is it a question of W7/USB? Any other ideas would be useful.

  Speed on USB hard drives is relatively slow at first. You are looking at maximum read anywhere between 25 and 32MBs speed if the CPU is not do much else at the time. Supported playback mode tend to transfer bog down over time, as the fragmentation of the file. USB is convenient but firewire and eSATA are faster and faster.

• 250 GB USB external hard drive is compatible with Mac OS x on an iBook G4?

  Hello

  I just bought a Toshiba 250 GB Usb external hard drive because the seller advised me telling me that it works in my iBook G4 Mac OSX computer.

  I made it and I see it on my desktop with a folder called System Volume Information and 2.32 GB available.

  I tried to copy a file and I got a message saying that the disk is not editable.

  Where can I find the instructions to initialize if it's compatible?

  Thanks in advance,

  Joan

  Post edited by: jinglada

  Post edited by: jinglada

  Hello

  I'm not sure on this subject, but maybe you have to format it.
  Are there issues listed in the Device Manager?

  Good bye

• I get the 0x8078012D error code when I run the Windows backup on an external hard drive.

  I get the 0x8078012D error code when I run the Windows backup on an external hard drive.  I have Windows 7 Professional.  That suggests this error code is the problem and how can I solve the problem?

  For people who read this thread, I offer the following information.  I solved the problem by noticing that the problem could have been caused, when the system image is created.  So I did a backup without creating the system image and backup is complete without error.

  Then I used the backup program to create a system image.  This time error (0x8007045D) was displayed.   The error report says "the operation failed for a device error encountered with the source or the destination. If the volume of the source or the destination is on a disk, run CHKDSK /R on the source volume or destination and then try again using. »

  So I ran chkdsk/r, and this program is a bad sector on the hard drive of my computer and fixed the error.  It took about an hour to run the program.  Now, the image of the system and the backup of data file work again.

  So I think that the main cause of error (0x8078012D) is deborahgarbe of i/o error (0x8007045D).  So if you get the first error code you can search for fixes for the second error code fix the root cause.

• How can I make a DVD of the restore hidden in my external hard drive partition recovery

  How can I make a DVD of the restore hidden in my external hard drive partition recovery because I want to recover my toshiba satellite L840 that does not respond directly to my hard drive so I put my laptop to an external HARD drive and then I want to copy a DVD recovery partition

  Your question is a bit confusing, you can boot the laptop at all? Have you tried booting in safe mode, you can make a recovery DVD set from there, the folder Toshiba.

  With the drive in the Toshiba, you should be able to use a F, F10, F11, or F12 key to activate the installation from the partition hidden started upward.

  Otherwise, you can contact Toshiba, and with the model of the product id number and the laptop for Windows, you can buy a set of disks.

• Can I use the disk utility on an external hard drive Mac os 10.6.8 to repair the drive on my macbook pro running mac os 10.7.5?

  Can I use the disk utility on an external hard drive Mac os 10.6.8 to repair the drive on my macbook pro running mac os 10.7.5?  My Macbook Pro does not start after that I upgraded to mac os 10.6.8 Lion and I have a bootable backup just before the upgrade.

  OS X: on OS X Recovery - Apple Support

• I can't initialize the disk for my new external hard drive

  I can't initialize the disk for my new external hard drive because the drop-down list in the Disk Management Console does not give me this option. I'm logged in as an administrator and running Windows XP.  The driver for the new hardware is not digitally signed because I can't initialize the disk.  So I can't get my new hardware to run.  Does anyone have any ideas on how I can get the option "Initialize disk" in the Disk Management Console?

  Hello Honduras1,

  Can you simply right-click and format everything first?  The drive must be formatted before use, make sure that you format NTFS.

  See you soon

• Use LR5. Because of volume and the size of the photos, I use an external hard drive. When opening LR5 it references only the local hard disk. How can I change the refernce to read the external drive. Thank you

  Use LR5, due to volume and the size of the photos, I use an external hard drive. LR refers only the Local Drive C not outside. Where do I change this by LR read the external drive. Grateful for the help.

  Thank you

  LR is not a file Explorer. He knows only the disks that you imported photos of.

  If you have previously imported these photos, then later moved into the external hard drive, go to the library files and "update location" Panel on the files that you moved.

  If you have never imported these images on the external hard drive, perform an import by using the option 'Add' (not ' copy') to keep the images on the external hard drive during import.

• Had a project done with first elements 11.  All media files and PRE files were in the same folder on an external hard drive.  Received a new computer, loaded first items 11 (which of course doesn't recognize not all previous projects as it is)

  Had a project done using first items 11 (the file exported and posted on youtube).  All the media files and PRE files associated with this project were located in the same folder on an external hard drive.  Got a new computer, responsible for first 11 elements (which of course doesn't recognize not all previous projects because it is a new installation) and now cannot open the original project to make some adjustments (connected to the external hard drive of course)...  Even tried to open the last saved auto program as well, no luck.  Just get a shell of the original project, but no real media file is passed in. Then get a prompt asking you where the file "rendering-3090026..." (20 More digits) is located.  Looking for C drive and external hard drive without success. Help!

  

  delilah12

  Which operating systems are involved - old and new?

  The external drive has the same drive letter on the new computer as it did when it was used on the other computer?

  Where are the video preview and the old led, Audio preview files compared to new? See Edit Menu/preferences/Scratch discs?

  Are all the place where is the file... messages just to render files? If all are for rendering files, what happens if you click ignore for their

  messages? Can you enter into the project and render it again if necessary and proceed with the project?

  Please see the bulletin. With the above information, we will decide which way to go? It seems that a media disconnect situation has developed in

  the passage from one computer to the other.

  RTA

• USB external hard drive recognition problem

  I recently copied a large number of music files FLAC from a NAS drive to an external hard drive. When I plug the hard drive into the USB port on my computer, it is not recognized or appear in the screen 'computer '. Instead, I have an icon in taskbar icon (bottom right of the screen) and when I fly over it says "safely remove hardware and eject the media.

  Please, what this mean and is there a problem with my external hard drive

  Thank you very much

  John

  Start the disk with the connected player manager.

  In the lower panel, check disks and look at the left panel. It must indicate the status of the disc attached. If shown as a foreigner do a right click and "import foreign disks".

  This does not affect the data on the disk and not the alternative option of having to write a signature to the disk. You may also define a drive letter in the right side, until a drive has a letter, you can't see its contents.

• Cannot open the USB external hard drive

  Original title: Hard drive

  I can't open the disk external hard usb and the device can see the list of devices and printer as 'USB to ATA/ATAPI Bridge '.

  Hello

  1. What is the exactly say by "device can see the list of devices and printer as"USB to ATA/ATAPI Bridge""?
  2. do you receive any error messages?
  3. did you of recent changes on the computer before this problem?
  4. were you able to open and use the external hard drive USB before?
  5. try to connect the external hard drive to a different USB port and check.
  6. are you able to access other USB devices with success?
  Method 1:
  I suggest you to run the fixit available at the following link.

  Hardware devices do not work or are not detected in Windows
  http://support.Microsoft.com/mats/hardware_device_problems/en-us

   
  Method 2:
  If the problem persists, try to uninstall and reinstall the USB controllers and check.
   

  (a) click Start, type Device Manager in the start search box and press enter.

  Bus USB controllers b) Expand .

  Note You need to scroll the list to find this point.

  (c) right-click the first USB controller under Bus USB controllers and then click Uninstall to remove it.

  step d) precedes the repeat for each USB controller is listed under Bus USB controllers.

  (e) restart the computer. After the computer starts, Windows will automatically check for changes on the hardware and reinstall all USB controllers that you uninstalled.

  (f) check the USB device to see if it works.

  You can check the link for more information:

  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Method 3:
  If the problem is not resolved, you can try to connect the hard drive to another computer and check.
   
  Let us know if it helps.