problem of time machine Airport: finder does not

Similar Questions

• Time Machine (on Mac) does not detect the airport Time Capsule

  Originally posted on the page of the airport, but seems to be the better question for this group. Sorry for the double post

  Looking for advice on how to get the Time Machine utility for access to my Time Capsule. I use an iMac in late 2012 with MAC OS 10.12 TimeCapsule is 2015 7.7.7 running latest firmware. Airport utility is the latest firmware 6.3.7.

  When I run the application Time Machine, Time Capsule is not detected. I tried the two WiFi and with cables connected Ethernet (not tried USB yet) and my Time Capsule doesn't have a lightning bolt or firewire ports.

  Open Airport utility & see the airport time capsule. I can see all connected devices, including the MAC, but no prompt activation Time Machine on the Time Capsule.

  I recently used TM on this iMac with a G-Technology drive. It auto detects the time machine and executes a back up. But airport Time Capsule will not.

  Any suggestions?

  Sierra has been problematic with the TC.

  1. make sure you don't have any charge virus protection software. In fact, I would say that disable all software 3rd part at the moment.

  2. make sure that you can actually write to disk of TC.

  Attach the TC disc in the finder and copy a file on disk, you can delete it later... It's just to ensure that you have full write permission. If it does not for the most part, you won't be able to use Time Machine... If you can then try TM immediately...

  Just to be clear, the TC is a network device. You have tested with ethernet and wireless... Ok.. They are only suitable methods. You cannot use USB. And clearly, TC has never had nor will never be ports Firewire or lightning.

  3. no chance that a reset complete TC. This will not delete the files on the hard drive, but you must make sure that the device is configured on the current computer.

  4. There are many positions in these days... read through them and do some research. Sierra is a bleeding edge new... So wait you to spend a lot of the precious liquid if you choose to be an early adopt.

• Migration access to my Time Machine files but does not transfer to iphoto library and is

  I used the migration to set up my new 2011 macbook pro. Looks like everything transferred except iphoto library and it is. I use iphoto all the time. I need this program. I want to use my new macbook 2011 as my only computer. That's happened? How can I get my iphoto on the new computer?

  What pictures and its library? They are thus not transferred?

  Update to iPhoto to Photos for OS X - Apple support

• I'm using Photoshop CS4 on an iMac with OS Lepord of snow.  Recently, I had to do a fresh install of the OS software, then brought back all my Apps, etc. back using Time Machine.  My problem is that now my Photoshop does not start and gives me a messa

  I'm using Photoshop CS4 on an iMac with OS Lepord of snow.  Recently, I had to do a fresh install of the OS software, then brought back all my Apps, etc. back using Time Machine.  My problem is that now, my Photoshop does not start and gives me a message to contact Technical Support with error # 150:30... What should I do now? @

  You must click on this link 150:30 blue and start with message 11.

  Don't forget to leave a space after sudo python before submitting the script.

  Remember that you will not see your password when you enter it when calling to make.

• Connected to but the Airport utility does not see the time capsules

  Hi, I have several time capsules.

  I can connect to the web, but the airport utility does not see the time capsules.  I tried to restart the time capsules, router, computer, but I still don't see any of the devices on the network.

  What now?

  Have you tried the airport utility in the iOS version... Download on the App or iTunes store and load... Works better than the Mac version.

  Other than what Mac running what OS do you use?

  This modem you have and how is the installation of TC on the network.

• Mac Mini - Finder does not open

  I have a Mac Mini with os x 10.10 2014.  The boot disk was almost full and the finder does not open.  I open the iPhoto and deleted the pictures and then empty the trash in iPhoto.  By logging in as a different user, I see I have ~ 1 GB of space, but when I log on my main account and admin the finder does not always open.

  I read that it was a known issue:

  http://forums.MacRumors.com/threads/Finder-doesn.

  It is said to remove the .plist files, but I can't get to Terminal to do.

  Please advise, thank you!

  Edmund

  If you were able to connect as another user, the issue is not lack of storage - this is the same computer.

  Yes, your .plist file may be corrupt, or you could have an extension conflict that affects only your user account.

  Try the start mode by holding down the SHIFT key at startup. Secure boot is quite slow because the operating system does a lot of cleanup and verification tasks, so give it time. Once you're completely connected, restart normally.

• I just got a new modem (Arris SB6190) and now my Airport Extreme does not connect.  It worked fine with the previous modem (a rented one TWC).  Help!

  I just got a new modem (Arris SB6190) and now my Airport Extreme does not connect.  It worked fine with the previous modem (a rented one TWC).  Help!

  Always recommended to reset the airport back to settings by default and then set up again whenever you have a new modem or change your Internet Service provider.

  Turn off the new modem for at least 30 minutes. More is better.

  Perform a hard reset on the AirPort Extreme, then it turned off.

  Make sure that the Ethernet cable connects the modem to the "O" on the AirPort Extreme WAN port

  After the power of the modem 30 minutes down, turn on the modem and let it run for at least 5 minutes by itself.

  Then, turn on the airport and let it run a few minutes

  Set up AirPort Extreme again

  Important note... There are many reports of problems with the modem Arris SB and airports. Both are great products, but they do seem to work perfectly together for some users.

• Finder does not show folders

  Hello

  I have a macbook Air 13 "bought in 2011, it has OS X 10.9 Mavericks installed and since yesterday the Finder does not work. When I open it it does not show a folder or a document, and it shows strange reasons (reminds me when my old Windows crashed).

  Here you will find some screenshots.

  Important to note is that if I use a projector I can find the files, then open them. Also when I upload an image on the internet and I have to select from the computer via the Finder (regarding the screenshots attached), it works well. In addition, as you can see from the screenshots, on top of the viewfinder, I can see the files and I can open them somehow. If I change the view of the researcher, song to a list, so I can't see anything and can not open files.

  I tried to restart the computer, turn it off and turn it on all by pressing the SHIFT key, but it does not work. Interestingly, when I force to quit the Finder application and I re-launch, for the first 10 seconds, it works, then it stops working.

  Do you have an idea what could be the problem?

  Alex

  

  

  Unfortunately I have a hardware problem with RAM or graphics chip.

  If your MacBook Air has been purchased after July 20, 2011, he probably has a material test integrated.  You can find starting with'd ' key.

  If it isn't you will need the installer original discs/flash drive that comes with it.    If missing, call AppleCare.

  You may also be able to get a disc to test material created with this link:

  https://github.com/upekkha/AppleHardwareTest

  If Apple Hardware Test reveals no problems, it is more likely that the RAM is an issue than any other thing: *

  http://www.macmaps.com/BadRAM.html

  * Links to my pages give me an allowance.

• What does that mean? -This problem occurred because your graphics card does not support the required version of DirectX. This version of Windows requires a DirectX 9.0 compatible video card or newer.

  I tried viewing a presentation power point and got to page 2 and my computer crashed.  Thought on... what he did previously trying to display a PPP file, but I thought that it was not my computer to the actual file.  now I have my doubts and also this time an error message came that said... This problem occurred because your graphics card does not support the required version of DirectX. This version of Windows requires a DirectX 9.0 compatible video card or newer.  can someone tell me what I should do next?

  You left out which version of DirectX has been shown.

  As far as I know, your Intel 945GM should support DirectX 9 and because you have XP sp3, you must have at least DirectX 9 installed.

  I met the following, but it shouldn't apply to Powerpoint:

  Some such as the Intel 945 GM Intel video cards have a design limitation which may cause problems when you try to run the Source Engine games. 3D graphics kernel does not support transformation of material, light and the vertex shader to similar technologies, which is an important part of the pipeline of 3D acceleration. Instead, this functionality is emulated in software that can reduce the compatibility and performance with 3D games.

  I don't have a solution for you (assuming that DXDIAG, in fact, reports to have DirectX 9 or higher).  You can see if you install a new driver support, but if it were me, I would be first contact Acer technical support or ask your question in another forum as one of the following conditions:

  Intel graphics Forum: http://communities.intel.com/community/tech/graphics
  Forum PowerPoint: http://answers.microsoft.com/en-us/office/forum/powerpoint (select the corresponding forum for your version of Powerpoint).  Include the results of DxDiag, including the version of DirectX.  If there is something unusual about the image that causes the crash, include this info as well.

  Normally, for notebook/laptop computer, it is better to get the drivers of the mfr of computer rather than the manufacturer of the device.

  Acer drivers for your computer are here: http://support.acer.com/us/en/product/default.aspx?tab=1&modelId=535 (you want the Intel VGA for XP driver)

  Intel has a newer driver: http://downloadcenter.intel.com/SearchResult.aspx?lang=eng&ProductFamily=Internet+Devices&ProductLine=Netbooks&ProductProduct=Mobile+Intel%C2%AE+945GM+Express+Chipset+Family
  It's the main Intel support page: http://www.intel.com/p/en_US/support/highlights/graphics/945gm

• I have an acer with SP3 and Windows XP machine. It does not recognize a DVD - RW in my TSST Corp. CD/DVGW TS - L632D

  Original title: DVD problems

  I have an acer with SP3 and Windows XP machine. It does not recognize a DVD - RW in my TSST Corp. CD/DVGW TS - L632D what is the solution. I tried the fix and I also used the Center 'Fix it '.

  Hello

  1 how long have you been faced with this problem?
  2. don't you make changes on the computer before this problem?
  3 are. what patch you referring?
  4. this happens to you with some specific discs?

  Reinstall the drivers for DVD player and check.

  1. click on start > run
  2 type devmgmt.msc and press ENTER. If you are prompted for an administrator password or a confirmation, type the password, or click on allow.
  3. in Device Manager, expand CD-ROM/DVD-ROM drives, right click on the device CD and DVD and then click on uninstall.
  4. When you are prompted to confirm that you want to remove the device, click OK.
  5 restart the computer.
  6. when the computer restarts, the drivers will be installed automatically.

• Problem of PSG - Samsung Galaxy phone does not connect on windows 7 pc

  Problem of PSG - Samsung Galaxy phone does not connect on windows 7 pc

  I have two identical, the Samsung Galaxy phones, it connects to the pc to transfer files either does not connect despite the many possible corrections, I've read online by train.

  The phone tries to connect but is a problem of the PSG, while it is plugged said to install the driver, then momentarily, it says ready to use and then goes back to install driver again, it done a few times and then says failed.

  I tried to reset the phone to factory settings, reinstall the driver etc etc but nothing I tried works.

  I've read other posts of similar questions and have created a mtltrace.etl file, but I don't know where or how to download for investigation.

  Any help appreciated

  Hello Rob,

  Thank you for the update on the issue.

  I suggest you to uninstall all the drivers, that is Samsung as well as Bluetooth.

  Then, restart the computer and plug all phones Samsung three each so install the drivers and software from Samsung kies from the link below:

  http://www.Samsung.com/UK/support/model/gt-S6810PWNBTU

  After installing everything that the Samsung and then restart the computer and then plug the adapter Bluetooth (driver installation) and check if the problem persists.

  Thank you.

• Unable to connect to MKS: virtual machine configuration file does not exist

  Guys,

  Need a little help I'm running the following

  vCenter Server 4.0.0 (build 208111)

  ESX Server 4.0.0 (build 208167)

  I have a computer virtual running WIndows 2000 Advanced and when I try and open the console I get a black screen and the error message following

  "" Unable to connect to MKS: virtual machine configuration file does not exist '. "

  I scoured the data store and all the files of the virtual machine appear to be in place, I thought deletin the virtual machine from the inventory and add the vmdk file, it would be a good idea?

  Thank you.

  Remove and add new inventory won't hurt (you could lose data historial for virtual machine), it probably won't solve the problem.

  I doubt, it is a problem with the .vmx file, but you can try:

  -Remove the VM of the inventory

  -To create the new virtual machine (with the same characteristics as the virtual machine that you removed), name it differently and do not add hard drives that it

  -Change the new VM settings and add the existing VMDK virtual machine that you deleted

  -Power on VM and try

  • You should always have your complete file to the virtual machine original intact, in case you need, you will always have your original vmx file to add it to the inventory.

  By doing these steps you re-create the vmx file.

  f this post was useful/solved your problem, please mark the points of wire and price as seem you. Thank you!

• Reveal in finder does not

  Hi and thanks for reading. This isn't a big problem but I couldn't find any information on this anywhere. I noticed in 5.5 when I click on a clip and try to get it to show up in the Finder, nothing happens... I think that it worked when I installed it all first, but I can't be sure at this stage. However reveal it in Bridge works and find the file. I thought that things will get better when I did a clean install of Cougar and then installed CS6 but the problem is still there. I think it's more convienent to see in Finder and then fill especially waiting bridge open. Does anyone have any ideas why reveal in Finder does not work for me? If this serious, I did a reorganization of Adobe applications... I have the rest of the Production... I moved them all from the Applications folder to a sub folder in the Apps folder Adobe. I don't know why Adobe them away stuff like that. Thanks for any help on this.

  There is a major bug in OS X Mountain Lion 10.8.2 that prevents "Reveal in Finder" (open in the Finder) to work in a variety of applications. Workaround: when he gets to run the following in a Terminal:

  sudo killall -KILL appleeventsd
  

  or, Alternatively, quit appleeventsd , in the activity monitor.

  Maybe your problem is related to this.

• Sierra: Finder does not display the modified files

  I just upgraded all my Macs and minis to Sierra 10.12 and have run on something that looks like buggy.

  My usual use of a Mini special is transcoding many video files, and I have a collection of (painfully tedious) shell scripts that manipulate file names, do the transcoding and moves the files to one directory to another to make this work. In * most * folders that I see in the Finder when a file is moved to the directory it shows in the Finder correspondent discovered, but in * some * of them, the Finder does not update when a new file is moved to the underlying directory, is renamed or deleted entirely.  For example, I see there are 28 video files to be converted into a directory named FLOOR TRANSCODE using ls - ls in the terminal, but only 6 looking at the same folder in the Finder.

  These scripts have been working for several years on this material under El Capitan and Yosemite.

  Records I've noticed so far are all in the root of the drive HD server, not under no/Users. Finder appears to display all files when displaying the files moved to USB external drives for storage after transcoding. Another element that might be relevant, is that my normal view of the mac is via RDP (Remote Desktop "headless", no physical monitor in use).

  Have you noticed something similar?

  This Mac Mini is late 2012, MacOS Sierra 10.10

  I'm not much of what you have written (for example, I don't know what "RDP").

  In any case, based on the title of your post, I will answer how to find files "changed" in the Sierra of MacOS.

  I just use the search box and type "Date: today".

• Can't stop Mac like Finder does not close

  I tried to cancel a copy of file on an external hard drive by clicking on the 'x '. I get the message 'stop' to cancel it, but it happened for 24 hours now.

  Finder does not close because there is always this cancellation in operation.

  How can we get finder be forced to close or cancel it on my copy of file be forced to cancel properly?

  Any ideas please?

  Thank you

  Have you tried the Apple menu > force quit?