problem of time slot

Similar Questions

• How to pass the time slot to the dashboard in URL parameters

  Hi all

  Does anyone have example on how to spend the time slot to the dashboard in URL parameters?

  That's what I tried. Normally, the dashboard has timeRange as a required context, I deleted and added "startTime" and "end" like required context, so that I can spend 2 timestamps in URL, and then I created a 'extra context' called "timeRange", which calls a WCF function to create a CustomTimeRange, it works pretty well. But the problem is if I have exploration down this dashboard to a different dashboard, the slot not transmitted properly. So I guess, I was not the right way. Does anyone have an example?

  Thank you

  Xiaoning

  1 re: timeRange not spent in drilldown pages

  Please confirm that you have defined one or more entries in context "Required". If you do not, please add a (like "hostName") and re - test. It work?

  2. with 'nologin' user URL redirects to the login screen

  Yes, what is expected. With nologin user, you should always use the form http://foglight_fms:80/console/foglight_ext?viewId=system:mywcfmodule.1?hostName=myhost of the URL rather than the

  form of http://foglight_fms:80/console/page/System:mywcfmodule.1?hostname=myhost .

  It would be great if you could post a brief description of your design dashboard once you have this work. That sounds like something that the other members of the Foglight community would be very interested!

  Kind regards

  Brian Wheeldon

• Problem of time synchronization in the HP b2600 workstation.

  We have three Hp b2600 named rop11, rop12, rop13.

  rop11 is active and rop12 is passive and rop13 is autonomous.

  ROP's time synchronized with the GPS clock. But we face a problem of time synchronization.

  As we sychnisied a day after we saw a drift of about 10 seconds in rop11 and 1-2 second in rop12 & rop13.

  ntpq shows according to the attached file.

  TW file attached, one is Parallet1 where the existence of the problem and another is PArrallel2 where its not working OK.

  PL. suggest the cause and cure.

  Thank you

  Rajiv Garg

  Mr President.

  All the vause zero in Parallel1.doc comapring and PAralle2.doc, which indicates how to initialize the same.

  Rajiv gelin

• Time slot

  Hello

  I have clinical data visit a doctor like that.

  WITH doc_pat AS

  (SELECT 27 July 2015 'seen_dt, 'A' Clinic, 1 patient_id,' 06:00 ' from_time, ' 07:00 ' to_time, doctor "XYZ")

  OF THE DOUBLE

  UNION ALL

  SELECT 27 July 2015 ', 'A', 2, ' 07:00 ', ' 09:00 ', 'XYZ' FROM DUAL

  UNION ALL

  SELECT 27 July 2015 ', 'b', 3, 10:00 ', 12:00 ', 'XYZ' FROM DUAL

  UNION ALL

  SELECT 27 July 2015 ', 'A', 4, 14:00 ', 16:00 ', 'XYZ' FROM DUAL

  UNION ALL

  (SELECT 27 July 2015 ', 'b', 5, 18:00 ', 22:00 ', 'XYZ' FROM DUAL)

  SELECT Clinic, patient_id, from_time, to_time, seen_dt, doctor

  OF doc_pat

  It will give

  Date		Clinic	Patient_id	time		at the time	doctor
  July 27, 2015	A	1		06:00		07:00	XYZ
  July 27, 2015	A	2		07:00		09:00	XYZ
  July 27, 2015	b	3		10:00		12:00	XYZ
  July 27, 2015	A	4		14:00		16:00	XYZ
  July 27, 2015	b	5		18:00		22:00	XYZ

  I want to display them as this order by time slots.

  Date		Clinic	Time	at the time	doctor
  July 27, 2015	A	06:00		09:00	XYZ
  July 27, 2015	B	10:00		12:00	XYZ
  July 27, 2015	A	14:00		22:00	XYZ

  1 WITH doc_pat LIKE)

  2. SELECT date "2015-07-27' seen_dt, 'A' Clinic, 1 patient_id,' 06:00 ' from_time, ' 07:00 ' to_time, doctor 'XYZ'"

  3 OF ANY UNION DOUBLE

  4 SELECT date "2015-07-27', 'A', 2, ' 07:00 ', ' 09:00 ', 'XYZ' FROM DUAL UNION ALL"

  5. SELECT date "2015-07-27', 'b', 3, 10:00 ', 12:00 ', 'XYZ' FROM DUAL UNION ALL"

  6. SELECT date "2015-07-27', 'A', 4, 14:00 ', 16:00 ', 'XYZ' FROM DUAL UNION ALL"

  7. SELECT date "2015-07-27', 'b', 5, 18:00 ', 22:00 ', 'XYZ' FROM DUAL"

  8)

  9, as grp)

  10. SELECT

  11 doc_pat.*

  12, case

  When 13 from_time = lag (to_time) on (seen_dt partition, Clinic, doctor by from_time)

  14 then 0

  15 end otherwise 1 grp

  16 FROM doc_pat

  17)

  18, grps as)

  19 select

  20 grp.*

  21, sum (grp) on g (partition seen_dt, Clinic, doctor by from_time)

  22 of grp

  23)

  24 select

  25 seen_dt, Clinic, doctor

  26 min (from_time) from_time

  27, max (to_time) to_time

  28 of PEB

  29 Group by

  30 seen_dt, clinical, physician, g

  31 * order of seen_dt, physician, clinical, g

  >/

  SEEN_DT C DOC FROM_ TO_TI

  ------------------- - --- ----- -----

  27/07/2015-00:00:00 A 06:00 XYZ 09:00

  27/07/2015-00:00:00 A XYZ 14:00 16:00

  27/07/2015-00:00:00 b XYZ 10:00 12:00

  27/07/2015-00:00:00 b XYZ 18:00 22:00

• Lance Muse problems, every time I launch Muse, it crashes, I have re-installed twice with without success.

  Lance Muse problems, every time I launch Muse, it crashes, I have re-installed twice with without success.

  Hello

  It might be because of permissions. If you are on a MAC, you can give permissions ' read & write ' to everyone on the following folders: -.

  (1) ~/Library/Application support/Adobe

  (2) / Library/Application Support/Adobe

  ~/Library/preferences/Adobe 3)

  On a windows machine, please give all permissions for all on: -.

  (1) C:/Program Files(x86) /Adobe

  Files(x86) /Common 2) C:/Program Files/Adobe

  Kind regards

  Neha

• Problem of time zone: time zone is not consistent

  Problem of time zone: time zone is not consistent
  From sqlplus, the time is displayed:

  SQL> SELECT SYSDATE FROM DUAL;
  
  SYSDATE
  --------
  09-11-11

  from the Windows command line tool:

  D:\coherence\lib>DATE
  The current date is: 11/11/2009
  Enter the new date: (dd-mm-yy)

  But from the Control Panel, it shows at the present time is 10:40.
  For this reason, a database of programs don normally work.

  There are two ways that you could do.
  Track 1:
  Search for a file by the name "glogin.sql" on your client workstation and add the following statement

  alter session set nls_date_format = 'YYYY-MM-DD HH24:MI:SS';
  

  Make sure that you save the file. This change will apply to all users who will connect to the database using SQL * PLUS to your machine.

  Track 2:
  Create a shortcut and place it somewhere (for example on the "DESKTOP").
  Right-click on the shortcut and choose Properties.
  The text corresponding to the box 'Start' to reflect the current location of the shortcut.
  Create a file by the name "login.sql" and place it in the same folder that the shortcut.
  Edit the file and add the following line.

  alter session set nls_date_format = 'YYYY-MM-DD HH24:MI:SS';
  

  Make sure that you save the file.
  When you double-click the shortcut to launch SQL * more and opening of the session, the "login.sql" script is executed.

• problem of Time capsule

  Got a new modem from comcast, but now my time capsule will blink orange.  Utility box airport continues to appear on my screen.  Says that it cannot connect to the new modem.  When I click around.

  Looks like I'm missing a step easy connection to connect.  The cables are in good slots.  Someone at - he seen this before?

  Any time you change the material or providers of Internet services, networking, it's always a good idea to carry out a new round of power complete your network equipment. Check out the following Tip of an airport users for details. Please post back your results.

• Problem with Time Machine

  Of course, I don't know how time Machine works. I got a 1 TB drive connected to my iMac as I have owned and have never had a problem of backup. Now, I get a warning that says that there is not enough space on my 1 TB drive to back up a computer with, in total, less than 500 GB of information on it. It makes no sense at all. How a 1 TB drive can not have enough space to back up a computer with the hard drive has only about 480 GB of stuff on it?

  And what do I do to fix this? Thank you.

  ...

• Problem face Time and sky Hub... Help!

  Hi, we have a Hub of Sky - SR102-Z for our connection broadband. Speeds are great, without connection problems with the exception of FaceTime on iPhone, iPad and iMac too.

  Our connection speeds are-

  Upstream (Kbps) 5676

  Downstream (kbit/s) 30816

  We are broken video connections gel, pause, audio drop inside and out, total nightmare! This only happens on our network of Sky at home, we have no problem anywhere else, be on wifi or 3G or 4G. The problems occur with a cable and a Wi - Fi connection.

  I talked to the sky and they say that some ports that require FaceTime will be blocked on the firewall of the router. If someone had this problem and have you been able to fix. Apologies if this has already been covered, while hoping for help.

  Just downloaded Skype and it works very well, no problem, but prefer to use Face Time if possible.

  I have the same problem with ipad/iphone on the hub of sky-, as well as with my friend who has internet sky

  My pings are low and my connection up and down stream is great - just facetime

  My wok phone and ipad on our ADSL (demon provider) photo works is clear as day, if not the devices.

  It would be interesting to know why the Skys connection is bad with Facetime, if the port has been blocked while it wouldn't work?

• Problem of Time Capsule Roaming Network airport

  I'm having a problem by establishing a network of roaming.  When I plug my extender devices in ethernet cables through a switch to my Time Capsule base station, my wifi signal drops 150 + MBS next to the base station to < 10 mbs.

  I have a wifi in my home network based on a new time Capsule airport base station (ATCBS) running firmware c. 7.7.7.  I have my 4th gen AEBS & a 2nd gen Airport express both race v. 7.6.7 updated firmware in place in Bridge mode to extend my network in different rooms in my house. The system works very well, but I wanted to increase the power of the signal in remote places so decided I would like to convert it to a mobile network by installing ethernet cables to connect my ATCBS the AEBS and express extensions.  I use a switch Netgear 5 port (NOT of GS205-100) that I only have a single LAN fanless available left port on my ATCBS.

  I installed 3 ethernet lines-1 each in rooms with my ATCBS and airport express using mounting wall punch down taken using the convention of wiring 568B, AEBS.  These lines all end with male plugs in a unique space in the basement and are also wired as 568B.  Then I plug the ATCBS, AEBS and express lines in the switch in this remote area.

  I've done a few connection cables in the role of Cat 6 cable, I had over the House, and they all very well with my cable Tester check so I know the cable itself is not defective.  The cables all run in the basement where I can see, so I know there is not any problem to be crimped/damaged.  I have not any gear to test the installed well son.  I visually inspected the male and female (punchdown) ends to ensure that colors are properly prepared.  I did a test of my jacks punchdown conductivity by testing 8 wires on the sides of the socket and the pins in gold on the inside where an ethernet cable connecting between the cut ends.  All wires are correctly leads to the appropriate pins.

  If I plug just the ATCBS into the switch next to him and using a good patch cable I see no change in the strength of the Wifi.  If I can plug my express (also moved to the room of the base station) using another cable good patch in the switch, wifi drops as described above.  If I plug the ATCBS on the new socket and the switch at the other end - no change in force wifi.  If I plug the express in its remote location system also uses the new ethernet cable installed for him and passing through the switch, I get the wifi signal reduction.  I get the same result if I take the express up to thevbasemenbt and plulg the switch with a connecting cable).  It seems therefore that the problem may not be with the newly installed cables that I get the same result by using or by using cables good patch, and with the switch in the same room with the ACTBS.  It doesn't matter how I'm trying to connect all the devices together, plug extender devices into the system brings the WiFi falling to almost nothing.

  Any ideas on what could happen?

  I'm having a problem by establishing a network of roaming.  When I plug my extender devices in ethernet cables through a switch to my Time Capsule base station, my wifi signal drops 150 + MBS next to the base station to < 10 mbs.

  That's what happens when you initially set up the device to the airport "extend" using a wireless signal... and then later connect an Ethernet cable to the unit of the airport.

  Since the airport is configured to connect wireless and waiting for a wireless connection, the Ethernet connection and then creates a feedback loop massive on the entire network... in fact, basically crashed the network.

  Basically, you have to start over again with the AEBS and AirPort Express and "Apple Installation Wizard" to set things upward. It's practically automatic. All you need to do is assign a device name to each airport and the wizard supports all the rest.

  After the back if you need some advice on how to correctly configure things.  You can be amazed at how simple, it comes... and surprised by the wizard settings apply.

• Constant problem: first time, a link is clicked: server not found. Refresh page and the server is immediately.

  Foxfire regularly gives me the error message: server not found - BUT if I hit refresh, the server 'not found' opens immediately 99.9% of the time. It's really annoying. Happens several times per session, but not every time I click on a link.

  Maybe you have a problem with IPv6.

  See http://kb.mozillazine.org/Error_loading_websites

• problem backup Time capsule

  It has been 29 days since the last backup from time machine of my imac 27 "and the mac pro to my time capsule.

  When I select the disk to use for the backup, after the display of connection to the disk 5 or 10 minutes later a messeage "wa there a problem connecting to the server airport time capsule."

  Did you turn off all of the network and restart everything in the right order... modem to transport CANADA for computer... with 2 min between them?

  If you have already tried you must reset the TC factory and redo the installation... it sometimes get lost.

  Start from a factory reset. No files are lost on the drive hard in doing so.

  Universal factory reset

  Turning off the TC... That is, remove the power supply cord or the power at the wall outlet, wait 10 seconds... Hold the reset button... be nice... Turn on always even now in reset... and keep holding in for another 10 seconds. You may need assistance because it is difficult to hold in reset and power on. It will show the success quickly flashing led front. Release reset... and wait a few minutes for the TC to reset and return with the factory settings. If the front LED flashes quickly you missed and simply try again. The reset is quite fragile in these... Press the key while it is just click away and not more... I've seen people bend lever or even break. I use a toothpick as a tool.

  NB. None of your files on the hard drive of the TC are removed... This simply clears the settings of the router of the TC.

  The installer the TC.

  And then redo the configuration of the computer with the Mavericks - Yosemite - ElCapo. (MYELCAP)

  1. the use of very short names... NO APPLE RECOMMENDED names. Without the space and pure alphanumeric characters.

  for example TCgen5 for the base station and the name of the TCwifi wireless.

  If the problem is using wireless TC24ghz and TC5ghz with fixed channels as it also seems to help stop the nonsense. But it can be tried in the second round. IE, plan on a first and second series of changes to fix this... If all goes well... I note other steps can you tour2.

  2. use all passwords also consistent with 1. but maybe a little longer. IE 8 and 20 characters of mixed cases and numbers... no alphanumeric non-caracteres.

  3. If the TC is router, you can ignore this point. It is only a problem when the TC is bridged.

  If ensure that the TC is always the same IP address... you will need to do this on the main router using a dhcp reservation... or a bit more complex setup by using the static IP address in the TC. But it's important for deriving from intellectual property in all directions when MYELCAP do not remember his name for 5 min after a reboot done for poor network management.

  4. check that your share on the computer name does not change... Make sure that it is also in line with the above... short without space and pure alphanumeric... but this change will mess up your TM backup... so be prepared to make a new, full backup. Sorry... keep this one for the second round, if you want to avoid a new backup.

  5 attach the TC disc into the computer manually.

  In Finder, go, connect to the server in the main menu,

  Type in SMB://192.168.0.254 (or whatever ip of TC is that you made static. It's a default router 10.0.1.1 and I encourage people to stick with it unless you know what you're doing).

  You can use the name... SMB://TCgen5.local where you replace TCgen5 with your name of TC... local is the default domain of the TC and does not change.

  However the names are not so easy as... the IP address nor reliable. They are not at least not in Yosemite. The field can also be a problem if you are not clogged or wireless directly to the Treasury Board.

  6. ensure that IPv6 is set to link-local only in the computer. For example wireless open network, wireless and Advanced preferences / TCP/IP... and the difficulty of IPv6. link-local only. Do the same for the ethernet if you use it.

  

  It is a lot more jiggery pokery, you can try, but the above is a good start... If you still find not reliable... don't be surprised.

  You may need to do more work on the computer itself. for example, to reset the NVRAM/PRAM/SMC... helped some people. A clean installation of the operating system is also useful if you update installed.

  https://discussions.Apple.com/message/29202159?ac_cid=ha123456#29202159

  Let us know how you go.

  No luck there which modem you have... and what OS is on your computer.

  Most any other details on your network that could relate to the issue... for example... are you using wireless or ethernet... other computers use without problems. Do you have an update or change anything recently?

• Re: Satellite A300 of start-up problems and time

  Hello everyone,

  I have a laptop Toshiba Satellite A 300, and I have some problems with it.

  Problem is when I leave my computer (without external energy source) the time resets 2007, after several hours about (could be 6 hrs)., and computer quite often begins immediately after that I push the power button.

  I don't know the cause of the problem, because the battery is OK., computer running long on battery.

  I think the problem is in an internal battery in the CMOS, but I don't know if there is in portable computers.

  Suggestions will be highly appreciated!

  Kind regards
  Osman

  Hello

  > The problem is when I leave my computer (without external energy source) the time resets 2007, after several hours about (could be 6 hrs)., and computer quite often begins immediately after that I push the power button.
  Which is strange, I want to say the CMOS battery should not unload even the main battery is not empty as it s really strange to happen after 6 hours of non-use...

  What you can do is to let the laptop connected to the AC adapter for over 24 hours
  During this period the laptop should be lit!
  Then you can check the operation of the CMOS battery and if this behavior will always be

  If Yes, then you will need to contact a local ASP. Maybe the CMOS or the motherboard needs to be replaced

• Problem of time system on Satellite M105-s3051

  Hi all

  My satellite M105-s3051 has a problem in the clock. In the configuration, the seconds will not change. This isn't a rpoblem in the battery, because it saves the changes. When I go to windows, the windows clock assume it, but an hour before, he turns to time I rode in the configuration (1 our less). I've already upgraded BIOS 2.6, but the problem persists. Whenever I enter the configuration, the value I see is the last I have registration, without the clock change, the second number is freeze, as the minutes and hours.

  Any suggestion?
  Thank you very much.

  THE

  Hello

  What BIOS did you use?
  This laptop was designed for the U.S. market only, and the drivers and the IOS B must be downloaded and used from the Toshiba page us.
  You said you used the BIOS 2.6. Currently, only the 2.50 version appears on the Toshiba page and 5.20 versions for using Vista!

  Maybe you're using the wrong windows time zone?
  In the -> date & time control panel please check if the box on the right has been chosen.
  Check if the option automatically adjusts the clock to save the changes to day was marked, and if the laptop automatically synchronize with an internet time server.

• Problems with Time Capsule

  I have problems with our time Capsule. My husband and I have Macbook Pro (from 2012). We use a Time Capsule as our backup disk but not our wireless router (we use the router provided by our internet service provider). We have configured like this for over a year and it is usually worked fine. In the last month, we had problems with backups does not happen. Currently, computer of my husband has saved in about 2 weeks, and mine has not backed up in 2 days.

  It seems that our computers lose their link with time capsule. If I go to the finder, the shared drive appears under "shared", but if I click on it to connect I get a message that says "connection failed." Airport utility shows the time Capsule but has a yellow triangle next to it that says "device not found."

  If I unplug the Time Capsule and plug it in again, it reconnects. I did this earlier this evening and was able to access the shared drive and make a return to the top. But a few hours later, this subject has disappeared again. I tried to do this same thing - unplug, get the rear connection, only to lose it again a little later. Any thoughts on what could be the problem? The Capsule was bought the same time than computers.

  I guess what surprises me is that you had no problems up to this point.

  Your computer must connect directly to the Treasury Board. Ethernet or wireless... It will break things especially in the BONES later if you do not.

  Do you have recently move you to el capo... ?? That could have triggered the problem.

  I lost the link but in apple of one document stated finally that you connect directly the computer now... because of the bad DNS in the operating system.

  If I unplug the Time Capsule and plug it in again, it reconnects. I did this earlier this evening and was able to access the shared drive and make a return to the top.

  That's why you get this nonsense. He is able to find the backup if DNS is renewed due to reset... After a few hours it is lost again.

  What operating system do you use?

  My recommendation is to put on wireless and a link to the direct of TC...

  A TC Gen4 purchased in 2012 is now at least 3 years and let me tell also your reliable stage... you are now at the stage of growing decrepitude of old people. It might work correctly for a year or two... It can suddenly die tomorrow... but more likely will fade into the sunset.