Problem opening session WAP54G
OK - so I think it's a very simple question that I am assuming will be a duh! response.
I purchased a WAP54G - got hooked - took the CD very well Setup Wizard. Problem is that I can't access the device through the web interface. I do this from a laptop (wired) with wireless off. I put (static) IP 192.168.1.100 laptop computer and navigate to 192.168.1.245. When I am asked to authenticate - what I'm doing but none of the logons are successful. The credentials are not accepted.
I tried three different computers (XP, Vista, Vista64) and two browsers (FF and IE) but always get the same answer.
I ran several times - Installation Wizard have changed the SSID, passwords etc and in each case, check the changes stand. From there, I know the computer speak AP - but I can't connect from a web browser.
I am running Norton on the computers but have tried to disable and always get the same answer
any help would be appreciated
The default connection for the WAP54G is;
User:
Password: admin
IE, the user name is empty.
If this does not work as you have set the password at one point. You cannot set a user on the WAP54G, that is to say, the User: is always empty.
Concerning
Fred
Tags: Linksys Routers
Similar Questions
-
problem opening session: the user profile service failed to connect
original title: problem opening session
I have 2 accounts.recently, user when I try login I get this message that says - user profile service is not logon.the another account is still ok.what happened past and how to fix
This isn't the FULL error message. Next time please make sure you post the message in its entirety and verbatim.
Is that what your error message: unable to load the user profile and the user profile service has not the opening of session
If so, please read on...
You have another admin account , you can connect?
If so, please do and do a system restore, if no help, run the Microsoft Support tutorial below.If you don't have another admin account, go into safe mode.
Here's how to get safe mode:
Shut down your computer > turn it back on and immediately and repeatedly press F8 key until you see a black and white screen. The top/down arrow and selectSafe Mode with network.In the window of logon in safe mode...
1 can connect to your account administrator in safe mode?
If so, do a system restore first, if not help, run it
Microsoft support tutorial below.2. If you cannot connect to your own account, you see another
next to your admin account in the logon screen?
If you do, that one is the built-in Administrator account. By default, there is no password. Connect to it and new to do a system restore first, if no help, run
the Microsoft tutorial support listed below.If you are able to log on in safe mode, do a system restore. Choose a
Date of when you were able to log in NORMAL MODE as your restore point.
How to restore the system:
http://www.Vistax64.com/tutorials/76905-System-Restore-how.htmlTutorial from Microsoft support :
http://support.Microsoft.com/kb/947215
There are several methods, go through one by one.
Method 3 has a "fix it for me" application -
could not connect to the computer network. When the password is entered with the following error message appears: "the user profile Service service has no logon. Unable to load the user profile.
Hello
I suggest you to follow the steps in troubleshooting from the article below and check if it helps:
Error message when you log a computer Windows Vista-based or Windows 7 by using a temporary profile: "the user profile Service has no logon. Unable to load the user profile.
http://support.Microsoft.com/kb/947215/en-us
Hope this helps,
-
The system cannot open session now because the domain is not available
Hello
I met the problem of windows cannot open a session after I installed the MicrosoftFixit50588.msi.
I need to turn on the CredSSP and download & run the site MicrosoftFixit50588.msi Web [url] http://support.microsoft.com/kb/951608/en-us [url]
He asks to restart the PC after the installation is complete. After that I restart my pc and I could not log on to windows and get the error message "the system cannot open session now because the domain
is not available. the user's machine: Winsows XP Pro SP3
Anyone know how to fix this? I urgent need, thank you.
Kind regards
GraceHi Grace,
1. is the computer connected to a domain?
2. are you able to boot into office?
I suggest you follow the link below and check them with the question:
The system cannot open session now because the domain
is not available: http://support.Microsoft.com/kb/824302
I hope this helps.
-
What is the best practice?
Start the program
-open session visa
-do stuff
-Close session visa
end program
OR
Start the program
-REPEAT
-do stuff
-open session visa
-do stuff
-Close session visa
-do stuff
-REPEAT END
end program
And don't forget that you don't have to do either. With NI-VISA, opening is optional for quite a few years. A session will be automatically created when you use any VISA. You can also set it to this VISA is automatically closed. It is definable tools > Option > environment.
That being said, it open and close are probably a compatibility issue. I don't know if the implementation of another company of the VISA works the same.
-
I want to know how long newspapers located in the shared folder in computer management > section open Sessions are kept during for XP and Windows 2000 Server.
I guess it's on the order of 4 to 8 hours, but I need a firm answer.
Hello
Is generally answer the question you have posted in the Microsoft Answers forums. It is better suited on TechNet forum
TechNet Forums - http://social.technet.microsoft.com/Forums/en-AU/winservergen/threads
-
the system cannot open session now because the domain d57jz6d1is is not available
IM computer work for someone elis I get this error (the system cannot open session now because the domain d57jz6d1is is not available) when trying to open a session even in safe mode has the computer versions xp with sp2 on it it is a mistake to real windows or if someone know a work around for help would be appreciated.
The cached credentials are limited or their expiration, you must connect to the domain to log on or you need to log on with a local account.
John
-
I am XP user window (home addition) and have recently experienced a problem open a document created with Microsoft Word. I saved the file, he sent, and trying to open it it does not allow me to do. I get a pop up saying - bar FILE CAN BE USED BY ANOTHER APPLICATION, or FORMAT of FILE CAN NOT NOT BE supported BY any OF THE INSTALLED CONVERTERS OR THE FILE is maybe DAMAGED. After you click ok in the pop-up a white prosser page for Microsoft word opens. I'm trying to accomplish creating a coupon for my wife to be able to post to its customers by e-mail.
It may be in a format that Word can not handle. They are files DOC, DOCX, XLS or or something else?
There is an update available for the words to open the DOCX files.
Or you may need the free viewer for Word or Excel Viewer.
To download Microsoft Office converters and viewers:
http://www.Microsoft.com/downloads/en/resultsForProduct.aspx?displaylang=en&ProductID=4289ae77-4cba-4A75-86f3-9ff96f68e491&sType=n_pf
MD MOEEN AJAZ KHAN - MCP, N +, A +.
-
I had problems opening and sending emails after January 2011 so I wanted to turn my back on Nov.2010
Hello
You cannot use the system back restore more than you have Restore Points. The only one
Another option would be to return the system to its out of the box, as it was when
you received. So, it would be better reset your e-mail settings and check with
the support of your email provider.How to create a System Restore Point in Windows 7
http://www.SevenForums.com/tutorials/697-system-restore-point-create.htmlHow to do a system restore in Windows 7
http://www.SevenForums.com/tutorials/700-system-restore.html============================================================
These can help with system related issues:
Follow these steps to remove corruption and missing/damaged file system repair or replacement.
Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup
Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN
sfc/scannow
How to fix the system files of Windows 7 with the System File Checker
http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.htmlThen run checkdisk (chkdsk).
How to run check disk in Windows 7
http://www.SevenForums.com/tutorials/433-disk-check.html=============================================================
This is Hotmail:
Windows Live Solution Center - HotMail - HotMail Forums Solutions
http://windowslivehelp.com/Hotmail - Forums
http://windowslivehelp.com/forums.aspx?ProductID=1Hotmail - Solutions
http://windowslivehelp.com/solutions.aspx?ProductID=1How to contact Windows Live Hotmail Support
http://email.about.com/od/hotmailtips/Qt/et_hotmail_supp.htm-------------------------
And Windows Mail
Windows Live Mail - Forums
http://windowslivehelp.com/forums.aspx?ProductID=15Windows Live Solution Center - Solutions mail - Mail Forums
http://windowslivehelp.com/Windows Live Mail - mail Solutions
http://windowslivehelp.com/solutions.aspx?ProductID=15I hope this helps.
-
Problem opening files in MS Paint
I'm running Windows 7 Ultimate on an ASUS Gaming Notebook aged 2 years. All installed software is set up to receive the latest updates.
About 3 days, 24/09/2012, UTC - 6 h, I started to experience problems opening files inside MS Paint. Recently used files open without problems, but when I used the drill down menu file and clicked Open, the File Manager window opens but seemed not completely. It stops before you post content in the panels on the left or right. After waiting almost a minute, an error window opens saying that the Paint program does not react with the choice of activation of one of the 2 buttons, Debug or Cancel.Despite my system restarts and run virus scans, nothing seems to be broken. I did, however, go through the Event Viewer to see what specifics have been involved in these accidents. As I'm not a programmer or remotely competent in any language of software, the only elements that makes any sense to me were mspaint.exe & explorerframe.dll mentioned in Application event error reports as well as a series of numbers. (I also made the applet of Quicktime, 22, do not overwrite my selections of extension of file to default, programs installed that I read in another forum, it tends to do with files visual & audio) So now, I have several issues with that I hope other posters can help me:- Everyone knows that I have here and have been able to solve it?
- Is it possible to uninstall, and then reinstall the paint? (I don't want to do a restore system b/c my last restore point was in April).
- Any of you know how I can repair this situation or even help out there so I could fix the problem myself?
- Is it possible to have reported this instance to Microsoft somewhere other than the generic return route?
Thank you very much for reading and doubly so if you can shed some light on this dilemma.
MaryBethA restore point can be created manually, but when you use windows update a restore point is often automatic created in the update process.
Simply type 'Restore' in the search text box programs & files, double-click the shortcut to "System Restore" which results in and follow the instructions (note the show more restore point box)
-
Problem opening of files from the two account email, secondary remembered as HDD and USB memory-based external excel. Message warning "there was a problem sending the command to the program". I use Windows 7, version studend of microsoft office 2007. This problem does not exist when I use the same USB on the desktop (XP)
You should not actuall open/edit an attachment or a file on a USB drive, the file must be saved to a document on the PC first and opened/edited location.
-
Problem opening excel attachment on Windows 8 of Yahoo mail
I have upgraded to Windows 8. In that in the emails and accounts, I added my Yahoo account also. But whenever I get the excel (.xls) attachment on my Yahoo! account, that it does not open if I access my Yahoo account through the start of the Mail option screen. However, if I go on Google chrome and search of Yahoo mail and you connect and open my account then the attachment opens there. Why does this happen?
Hello Sanjana,
Thanks for posting your query in Microsoft Community.
I would be grateful if you could provide us with the following information for a better understanding of the issue:
- The problem only occurs with excel or word as well?
- What is the error message that you get so that opening excel documents via the mail application?
- Are you having a problem opening excel attachments via the desktop version of Internet Explorer?
I would suggest trying the following methods and check if they help:
Method 1: I suggest you run the troubleshooter App from the link and if it helps.
http://go.Microsoft.com/fwlink/?LinkId=268423
Method 2: I also suggest you to follow the steps from the link and check if the problem persists.
What to do if you have problems with a soft
http://Windows.Microsoft.com/en-us/Windows-8/what-troubleshoot-problems-appPlease, try the above methods and return with the required information.
-
Problem opening pdf files. I have Acrobat DC/Windows by default, but when I click on the file, a file conversion screen now with all these language codes. Must use the "open with" function which is a nuisance. Why it will not open by default when I click on the file?
Hello
I guess that you are looking for this:
Open drive
Go in Edition > Preferences > General
Uncheck the option, the online storage see the opening of the files
Click OK and restart
Thank you
Abhishek
-
Problems opening AE CS4 in AE CS6. Is there a solution?
Problems opening AE CS4 in AE CS6. I recently tried to open a model bought CS4 and masks are removed, the music does not play, and the size of the exported file is huge. I also get a popup when opening older files that said "Adobe After Effects: the project must be converted from version 9 (Windows) and opens as an untitled project.» The original file will be unchanged. "The model developer seems a complex like me. I found another forum with exactly the same problem as mine, but no resolution. Is there a way to download CS4 or 5 so I'm able to use these models? I've upgraded to AE 2015 to see if there was a difficulty, no luck.
MAC OS X Yosemite 10.10.3
AE CS6/2015
The popup is to be expected. This is just to let you know that you use a newer version, so it will save it with a different file name. Not much.
Large file size, it's because you said it is. This should explain it: FAQ: why my output file is huge?
The lack of music may not be a problem. How do you check to see if there is music?
What do you mean by "a fall masks '?
I found the models are often quite confusing for beginners. AE is too complicated to just jump right in. You will encounter "traps" as you did. We can try to help you to work right now through it, but if you get a decent Foundation first, you'll be much less frustrated. This resource is a good starting point: starting After Effects
-
Why do I get the message "there was a problem opening drop you off", when I try to import an image to the form of PES 9 photos on my Mac running Mac OS 10.10.5, even if this image was imported before?
Move the thread to Photoshop Elements
Maybe you are looking for
-
Finished samples timed material vs single-point: different speed?
Hi all Although I had several questions about this request before that separately have been resolved, there is one last thing that remains difficult. Shortly: My application acquires data from 2 analog and synchronous inputs on 2 channels of analog o
-
Download programs and updates problems
My computer is having download problems. Instead of simply install programs, I have to register and then navigate to the program and run it. Now, when I record programs that they disappear from the folder I saved them in? Help!
-
Creation of Windows Vista installation disc
I want to know how to create a Vista 32-bit (Home premium) for an Acer Aspire 7720z installation disc. My stupid Acer laptop doesn't have any kind of disk and a partition to factory settings. I actually intend to install linux, but I want vista dual
-
Hello, my problem is that I bought a bigger stick flash (16 GB) like my old man a (4 GB) was too small for what I used it for. When I bought it, he says he has high transfer but it works more slowly than without a faster transfer. I know that NTFS i
-
OfficeJet pro k5400 solution center stops
The solution center is installed, but insists there is no unit printing HP-not found, and that is why the Solution Center will be stopped, even when the printer is installed and working properly. Everything works the 'doctor', reports OK, too. I have