Problem playing Movie DVD Maker

"Movie Maker" to burn the DVD in the past. Everything worked fine and still play DVDs without problem. Manufacturing DVD now works fine all the way including "Overview". The burn process ends, but when I play the DVD (will play on any player) the video compressed on only half of the screen (horizontally) the bottom half is green. 'Menu' executives are also screened. The audio is good. Reset the filters 'default', but still have the same problem. Any ideas?

Thank you for your response. On further investigation, I found that if the files have been marked ".avi", they were actually converted 'Divx' files. Used a program that can handle Divx files and dvd has proved that the fine. Again, thank you for your response.

JC

Tags: Windows

Similar Questions

  • Media player in vista 64-bit won't open after that I used Sothink Movie DVD maker WHY?

    I use Sothink Movie DVD maker to burn movies that I downloaded from various sites, mainly from Youtube Christian sites.  When I burn dvd Windows media Player 11 does not open and I have to download whole using the Microsoft Fix it Center.  I do not understand what is the problem?

    Hello

    • What were the changes made before the issue occur?
    • What happens when you try to open Windows media player 11?
    • You receive an error message?
     
    To resolve this problem, reregister the Jscript.dll and Vbscript.dll files. To do this, follow these steps:
    1. click on Start, click run, type regsvr32 jscript.dll, and then click OK.
    2. click on Start, click run, type regsvr32 vbscript.dll, and then click OK.
    See also:
  • Play movie DVDs didn't say program associated with it for performing this action.

    will not play the DVD movie not say program that associated with it for performing this action.  Create an association in the control panel of binding together.

    won't play DVD movie

    Hello

    • Thoes of DVD work were good before?
    • What were the changes made before the problem occurred?

    A default program is the program used by Windows when you open a particular type of file, such as a music file, an image, or a Web page.

    Check out this link. http://Windows.Microsoft.com/en-us/Windows-Vista/change-which-programs-Windows-uses-by-default

  • Problem with Windows DVD maker, Windows Vista Help

    I work with windows vista movie maker and dvd maker programs. The premiere of the film looks fine, however, after successfully burn on a DVD - R disc, the selections of chapter on the display of pages 2 and 3 for a few seconds, then the screen goes black for a few seconds, then returns to the chapter selections. How can I solve this problem? Thank you

    Wow! It is a large complex/project... more
    systems would never be able to make that
    in a DVD.

    It is possible that uncheck the filters would be
    improve the question...

    See the section "what to do if you have questions.
    in the following article.

    How to burn DVDs with Windows DVD Maker
    http://www.7tutorials.com/how-burn-DVDs-Windows-DVD-Maker

    I'm guessing that you are under Vista Movie Maker 6?
    The only new version would be Windows Live
    Movie Maker and I think most users would
    not to call it an 'Upgrade '.

    Personally, I suggest making small
    projects, or even a first part and a second part on
    two DVD.

    If you save your Movie Maker projects to DV - AVI
    format and when you import within the limit of the DVD Maker
    the total duration of about 1 hour for DVD
    You can have the best video quality.

    See you soon.

  • Problem with Windows DVD Maker

    I created my pictures in Windows Movie Maker with a title page for each project.  When I created a dvd in Windows DVD Maker, box scenes passes the text to the images in the project.  Is there anyway to put the dvd up to display the text only for the scenes but not images during playback.  I don't want to see the images, just the title of the scene.  Thanks for any help you can give.

    Hi Donna 51 t.

    When the video starts to play, he will continue to play along.

    You must manually to pause the video to stop it.

    I hope this helps!

    Halima S - Microsoft technical support.

  • Windows DVD Maker avi file is invalid or damaged

    I have a Toshiba Satellite and am running Vista Home Premium, 64-bit version. When I try to add files to Windows DVD Maker avi, I get an error message saying that the file is invalid or damaged. I no for a fact that there is nothing wrong with the file they open and play very well in one of my players and the same exact files were burned using create DVD Windows on an another Toshiba Satellit (owned by my brother) I was serching hollow these forums for a few weeks now trying things that have worked for other people. I installed ffdshow, but also mentioned in another reply vista codec pack. I have also run the sfc/scannow command in the prompt nd at the end he told me that the corrupted files have been found, but not all of them could be fixed. I have no no that much about computers of operation but I suspect that it is a bigger problem then just DVD Maker because when I try to put these files in Movie Maker, they're fine, but then when you play them or drag them to the timeline is no sound or picture. I've only had this computer for a few months and reallly wish I can use DVD Maker because all I have not use it and really like it. Please help me

    Hello Snowboarder,

    Thank you for using the Microsoft answers Forums.

    > Try using . FIXER AVI

    > Download and install a. Fixer for AVI and try to use, which should solve the problem for you.

    Thank you. UDAY $012 please let me know that whether the solution worked or not, I thank you and appreciate your comments.

  • Windows DVD Maker: Overview very rarely reflect final product

    I am currently trying to create a dvd from a file that has a 2 x 1 asect ratio. I checked the box to choose the format 16 x 9 and ntsc and all options to create a dvd that should work in theory. When I preview the dvd, it presents the film in its original proportions 2 x 1. However, when I actually create and burn the dvd, the dvd is set to the format 16 x 9 but the actual image is 4 x 3. then, even when I try to stretch the film will change not in 16 x 9. It is a very odd result that I don't think I've changed the settings and it did not always do that. I tried several fires with multiple movie files. I am trying the same movie file in my other pc and will update as soon as it's done. Help, please! I do videos at home and I want to show to the family, but they look ridiculous with the proportions so out of whack. Thank you!!!

    Erik

    Hi Daddypaste,

     
    Thanks for posting your query in Microsoft Community.

     
    I understand that you are having problems with Windows DVD Maker. I'll be happy to help you with this problem.
     
    Method 1: I suggest you to follow the steps from the link and check the status of the issue.
    Solve problems with creating a DVD-video using Windows DVD creation
     
    Method 2: I also suggest you to follow the steps from the link and check if it helps.
    Change Windows DVD Maker DVD-Video settings
     
    For reference:
    DVD-video burning: frequently asked questions
     
     
    I hope it helps. If you have problems in the future, please let us know. We will be happy to help you.
  • DVD Maker does not recognize my DVD burner


    Not from files from digital camera with Windows Movie Maker, sent the draft to burn movie DVD Maker tells me "no DVD burner installed"...

    Dell PC, 2 GB of ram, only six months, Vista OS, no other software has problems with the DVD burner...

    Any ideas? Any help much appreciated...

    Hello Bladerunner.au,

    You could try the following:

    Fill any DVD burning software. These programs may be trying to use the player, which prevents access to the Windows disk. Programs to look at include:

    • Roxio product family
    • Power DVD
    • WinDVD
    • Direct Media
    • Windows Media Player
    • Nero Burning ROM

    Update the firmware on the optical drive and the BIOS of the computer. In some cases, the firmware of the drive may be damaged or the BIOS can 'lose' the reader. Visit the Dell drivers and downloads site Web and enter your Service tag to get the updates specific to your computer.

    Since you have a new Dell computer, you can go to the Dell site for the support of this new computer.
    www.support.Dell.com

    I hope this helps.

    Thank you

    Marilyn
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think

  • Problem creating Windows DVD

    I'm having a problem with Windows DVD Maker.  After the DVD was burned, the menu pictures and video clips are on half top of the screen and it gives a green bottom half of the screen.  When I preview before I actually burning the DVD, it looks great, but after that the DVD is burned, it flattens the peak to the top of the screen.  I tried changing every setting in there, but he continues to squeeze the image in the menu at the top of the screen.  The DVD is very good, but the menu is messed up.  Any help would be great.  Y at - it a update or something that could help solve this problem?

    I'm having a problem with Windows DVD Maker.  After the DVD was burned, the menu pictures and video clips are on half top of the screen and it gives a green bottom half of the screen.  When I preview before I actually burning the DVD, it looks great, but after that the DVD is burned, it flattens the peak to the top of the screen.  I tried changing every setting in there, but he continues to squeeze the image in the menu at the top of the screen.  The DVD is very good, but the menu is messed up.  Any help would be great.  Y at - it a update or something that could help solve this problem?

    ================================================
    No guarantee... but... the info copied on the net... may be useful:

    =====

    The Green problem bar setting in Windows Movie Maker
    http://www.bernzilla.com/item.php?id=884

    When I tried to follow the directions, I was unable to find XVid on my
    computer.  So I googled XVid and then (I think) the 2nd entrance to
    Download XVid.  After I downloaded it, I could follow the directions
    bernzilla and when I published a video - Voila! no green bar!

    After thick film Green line is published
    http://www.windowsmoviemakers.NET/forums/ShowPost.aspx?PostID=105025

    =====

    Good luck...
    John Inzer - MS - MVP - Digital Media Experience - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

  • No sound when playing movie with Bit Torrent

    I try to play a movie torrent download with Bit Torrent 7.6 and do me no sound. What gives?

    Hello

    1. Problems playing movies in Windows media player?
    2. Have you been able to play the movies before?
    3. What is the format of film?
    4. What version of Windows is installed on the computer?

    I suggest running this utility for troubleshooting and to check if it helps:
    http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-sound-problems

    It will be useful.

  • Problem creating Windows DVD? Or Windows Movie Maker problem?

    Hello!  I created a slide show in Windows Movie Maker, which plays on my computer without problem.  Now, I try to burn it to a DVD by using the Windows DVD authoring application.  I was able to burn my DVDs sucessfully using the wizard and when I put it in the DVD player I get the main menu I created.

    I press play and start my video, but he plays 16 seconds and everything goes black.  Time continues to roll until the full 3 minutes are up, but I have 16 seconds of my film.  I burned 3 DVD and it did the same thing.

    Can someone help me with what I'm doing wrong?

    Hi Khsb14,

    Have a. you been able to watch the video before burning?

    B. did burn the DVD?

    C. is the DVD burner connected properly

    D. is the audio work after the 16th s?

    E. do you have a mistake when he went to the black screen?

    This could be a problem with the burner DVD or the method of engraving. Try the following methods.

    Method 1

    Previewing your DVD, you can view the photos and videos on this subject. Check if the full video is seen in the preview. This can help you determine if you want to make changes to the DVD before burning the disc.

    1. In the ready to burn DVD page, click Preview.
    2. To read the DVD preview, click play in the control screen.
    3. To control the playback, click Pause , play , previous chapter or next chapter , according to what you want to do.
    4. To display the DVD menu, click Menu. Click on the top, bottom, right, or arrows left to go in this direction on the DVD menu preview, and then click the Enter button to play the selected menu item. Click OK when you are done previewing the DVD.

    Check the link for more information.

    http://Windows.Microsoft.com/en-us/Windows7/burn-a-DVD-video-disc-with-Windows-DVD-Maker

    Method 3

    Choose a speed slower burn to your DVD recorder as follows:

      1. Return to the Add pictures and video to the DVD page and then click on Options.
      2. In the DVD burning speed box, select medium or slow.

    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-creating-a-DVD-video-using-Windows-DVD-Maker

    http://Windows.Microsoft.com/en-us/Windows-Vista/play-an-audio-or-video-file-frequently-asked-questions

    I hope this helps.

    Bindu S - Microsoft Support
    Visit our Microsoft answers feedback Forum and let us know what you think

  • Copies of Windows dvd maker downloaded movies in narrow crushed format.tried 4.3 & 16.9 options nothing works. They play OK in preview.

    Copies of Windows dvd maker downloaded movies in narrow crushed format.tried 4.3 & 16.9 options nothing works. They play OK in preview.

    Hello
    • This happens with each burning or movie files?
    You can follow below link that can help you to solve your problem:
  • I use Windows Live DVD Maker to create DVD movies to play on regular DVD players. But how can I burn these HD movies created in MS Live Movie Maker on Blu Ray?

    Projects of direct burning on Blu Ray?

    I use Windows Live DVD Maker to create DVD movies to play on regular DVD players.  But how can I burn these HD movies created in MS Live Movie Maker on Blu Ray?

    I think that you need a more powerful software. A Google search for:
    "Blu - Ray Authoring Software" could be a place to start.

  • What type of DVD should I buy to burn my Windows Movie Maker movie? Also, I have Windows DVD Maker, but no DVD burner. What should I buy?

    I created a movie in Movie Maker.  I bought some DVD + r's - the correct burn the movie on?  Also, I don't have a burner, I thought that I did, I can only burn a CD what should I buy?  I don't have a Windows DVD authoring program.

    Hi rondah,.

    Welcome to the Microsoft community newsgroups.

    The type of recordable DVD, you need to use depends on your DVD burner, as well as on your DVD player. Some DVD burners can burn only to certain types of DVD recordable. For example, with some DVD burners, you can only record to DVD + R discs or DVD + RW or DVD-R or DVD - RW discs, while some other DVD burners will let you burn on all of these recordable DVD types.

    As long as your DVD burner supports burning to these types of discs, you can use Windows DVD creation to burn a DVD using one of the following types of recordable and re-recordable DVD media: DVD + R, DVD + RW, DVD - R, DVD - RW, and DVD - ROM. These recordable or rewritable DVDs can be either simple single laminate or single sided double layer.

    You should also consider the device you're using to play the DVD once you have engraved, if possible. Some DVD players and DVD - ROM drives play only certain types of DVD. To determine what types of DVDs your DVD player or DVD - ROM drive can play, see the documentation that came with your device or go to the manufacturer's Web site.

    For more information on which is a DVD burner and why do I need one? Visit this link: http://windows.microsoft.com/en-US/windows-vista/What-is-a-DVD-burner-and-why-do-I-need-one

    For more information on the DVD-Video burning / publish a movie in Windows Movie Maker / Windows DVD Maker

    1: burn a DVD-video disc

    2: DVD-video burning: frequently asked questions

    3: Demo: create a DVD-video disc

    4: change Windows DVD Maker DVD-Video settings

    5: solving problems with creating a DVD-video using Windows DVD creation

    6: which CD or DVD format should I use?

    7: disc burning: frequently asked questions

    8: publish a movie in Windows Movie Maker

    9: work with projects in Windows Movie Maker

    Let me know if it works. Good luck!

    Hope this information is useful.

    Thank you and best regards,

    KKS Vijay

    [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

  • Ratio DVD Maker problem

    I have always used the 4.3 ratio setting (the same proportion as my video camera) when burning the DVD with no problems. However the last few DVD burned when played back while the video content has been saved in the right ratio of 4.3, the menu was recorded at 16.9 ratio.

    Hello

    You can also follow these steps when burning DVDs for the problem of the report l / h.

    a. Open Movie Maker.

    b. import the video into Movie Maker.

    c. drag and drop the movie in the 'Video' of the storyboard table section.

    d. click Tools > Options > Aspect Ratio (set to what you want.

    e. check Preview in movie maker to see if its what you want (in general, if the source file has report of the height and the width of 1.33 [i.e. 4:3] use 4:3 - if larger, 1.75/1.8333/2.25 [i.e. 16:9 or more] 16:9, if he is convinced to use click on publish to...) "DVD".

    f. movie Maker ask you to save the project, and it will run DVD maker.

    g. save your project.

    h. DVD maker automatically starts and Movie Maker closes automatically.

    i. DVD maker loads your project file (.) MSWMM)

    j. check the options of DVD and it must be the same as you defined in Movie Maker. Otherwise, repeat the process from step 1, do not change it in DVD maker-do not change the option.

    k. burn.

    If you have additional questions, or if this problem persists, come in and we will be happy to help you.

Maybe you are looking for

  • Considering an iPad but it will not be updated

    My aunt gave me his IPad. And this is my first 'Apple' anything so I don't know what model it is or really even how to use it. I stay to clear his account info and password and put up with my info. But now he says that he needs an update but I tried

  • After you have installed windows 7 on my pc, sometimes different errors whenever I start a game! and I lie down the computer.

    I just installed windows 7 64 bit of vista 32 bit on my acer and then I can't play all games, there is always a different error on games. It has stopped working or a mistake happens! It makes me a little angry when all I wanted was a better pc and no

  • How destructive restart vista 64-bit

    I'm having a hard time finding ouhow to perform a destructive reboot my computer slowed to the speed of the turtle and freezes all the time, I'm used to xp where everything you do is press f11 at startup to the top and then you can do the destructive

  • Error Code 0x8024402C(2015-10-1-T-01_53_35P)

    I have Windows 7 Professional. When I try to get the updates, I get the following error: Error Code 0x8024402C(2015-10-1-T-01_53_35P). How do I rectify this?

  • packet loss unacceptable?

    I have a test to a cisco wlc 2106 installation and 1231ag in light mode access point.  Ive been having problems with connectivity dropped, try a large number of configurations different wpa2.  I finally out down to a pretty ordinary config to a wpa2