Problem printer Brother DCP-7065DN

Similar Questions

• I can't install the printer Brother DCP 1000 Windows 7.

  I can't get the windows 7 32-bit for my printer Brother DCP-1000 driver. Whenever I try to get the driver through the "Windows Update" button when the screen "install the printer driver', it tells me that it is impossible to connect and try again later. The same process has worked for my other two computers running windows 7. The computer has an internet connection, but cannot update the printer drivers. Any ideas?

  Original title: Brother DCP-1000 printer - driver problems Windows 7

  You can try the 32-bit drivers for Windows Vista for the STC-1000 from the brother download Site. They tend to work perfectly.

• Problem installing printer Brother DCP - J140W

  I just bought a brother dcp-j140w to go with my new windows 7, I have as much that putting on the cd with instructions, but does not, tried another disc, but does not, I have to go to default programs. Thank you

  Excerpt from the double wire:

  I have brother printer dcp-j140w, but I need the cisd to show me how, it does not work, even if microsft claim that the device is very good, all the solutions please. Thank you, I try to read other discs, but empty. best regards and thank you

  I suggest you to go:

  http://welcome.solutions.brother.com/BSC/public/EU/GB/en/model_top/colormfc/dcpj140w_all.html?reg=EU&c=GB&lang=en&prod=dcpj140w_all

  Then, download the latest Windows 7 drivers * for your printer.

  The manual is also available for download from the link above, and this explains the installation procedure.

  * Make sure that you choose the drivers 32 or 64-bit according to your version of Windows 7.

  To see if you're running 32-bit or 64-Bit Windows click:

  Start-> Control Panel-> system

  Then look at where it says, "System Type".

• All-in-one printer, Brother DCP-7020

  I have an acer aspire 3610 laptop I would like to print on brother dcp-7020 printer all-in-one and it wouldn't print it would not install the printer do I need a driver down load

  Get the drivewr package and install it according to the instructions. Do not fix the uinit computer until direct by the instructions written wherther or screen.

  http://welcome.solutions.brother.com/BSC/public/us/us/en/DLF/download_index.html?reg=us&c=us&lang=en&prod=dcp7020_us&dlid=&flang=English&OS=7&type2=-1

  Tom Ferguson

• All-in-one printer, Brother DCP-350 c

  I downloaded the latest drivers, but my printer will not scan to e-mail. It analyzes in a file, but it takes time. I would be grateful if you answer.

  Brian Dickson

  Hi Brian and JennyDickson,

  Thanks for posting in this forum. I understand that you can not scan to e-mail while you are able to scan to file. It would be useful that you could let us know what happens when you try to scan to an email, is there any error code or message that appears?

  Please see the links on the manufacturer's Web site and try the steps.

  I can't use the scan to e-mail with Outlook 2003 or Outlook2007 after update the ControlCenter3. The error message "command line argument is not valid" appears. What can I do?

  http://welcome.solutions.brother.com/BSC/public/EU/eu_ot/en/FAQ/FAQ/000000/002400/000083/faq002483_003.html?reg=EU&c=eu_ot&lang=en&prod=dcp350c_all&cat=117

  I'm using Windows®. When I try to scan to email I get an error stating that "the command line argument is not valid. Check the switch you are using. What should I do?

  http://welcome.solutions.brother.com/BSC/public/EU/eu_ot/en/FAQ/FAQ/000000/002500/000076/faq002576_000.html?reg=EU&c=eu_ot&lang=en&prod=dcp350c_all&cat=117

  If the problem persists, contact the manufacturer. Check out the link.

  http://welcome.solutions.brother.com/BSC/Public_s/index.html

• All-in-one printer, Brother DCP-J125

  Printer does not print with black that all the ink is new old one day no error message, I downloaded the updated drivers.  still no black printing.  All other colors are ok I have Windows XP Service pack 3

  If the printer that is a day old, return.

  If your black ink cartridge is a day old (and you used to be able to print in black), it is likely that your print head is clogged.  If you can not help brother live, ask in the forum here--> http://www.fixyourownprinter.com/forums/inkjet

• Brother DCP-195 C

  I tried add a new printer (Brother DCP-195 C) on my Windows 7 laptop, and no matter how many times I try. It will not install the drivers. It allows you to decompress and then does nothing help.

  They are installed on my other computer and it has windows 7.

  So I am really confused.

  HELP!!!!!!!!!!!!!!!!

  I just checked and they are not the same. It is 32-bit and the other is 64-bit.

  But I clicked on the button download 6 times but I only get the bit to unpack then it goes no further.

• Brother DCP 145C printer/scanner/fax not compatible with Windows 7?

  My printer works on some days and not others.  When troubleshooting it says the spool service is not not running, but the directions of brother
  Impossible to solve this problem.  If I uninstall and reinstall it says that the drivers do not have download.  If I spend all day on the choice of system restore
  restore points different the printer works sometimes, but rarely the printer and scan at the same time.  The next day, it is generally not
  work after the automatic updates when I stopped, even if they are turned off. My laptop is a Windows 7 64 bit and the printer
  is a brother DCP 145C printer/scanner/fax

  Hello

  Have you checked with the support of brother?

  My personal printer is a brother. However, there are many other good brands like

  HP, Canon, Lexmark, Epson, Kodak and others.

  Rob - SpiritX

• Brother DCP - 150C printer Version 5.11, does not work with windows 7 on my HP laptop

  HI I'M DIETER KING ANOTHER DIFFICULTY I ENCOUNTER WITH MY PC.

  MY LAPTOP HP WITH WINDOWS 7
  MY PC DELL WITH VISTA HOME
  MY PC MEDION WITH XP HOME
  I WOULD ALL WORK TOGETHER IN MY HOME NETWORK, BUT THEY ARE NOT, SETTINGS MICROSOFT WINDOWS DO NOT SEEM TO WORK TOGETHER AND I'M DAILY ONLINE WITH YOUR BUSINESS AND ALWAYS WITH NO DAY ALWAYS HAPPY YET WITH NO PROBLEM.
   
  I WOULD LIKE YOUR HELP TO PLEASE TO SOLVE ALL THESE PROBLEMS, I AM HOME EVERYDAY WITH MY LIMITED MOBILITY DISABILITY IN BED OR WHEELCHAIR DISABILITY, I WOULD APPRECIATE YOUR REAL HELP.
   
  October 2012 I was downloading some free software and I was hacked by a group called Azure computer Comp, who claimed that they were working to solve the problems Microsoft had with hackers who infect their programs with access persons computers viruses. I pointed to your company, I pointed the FBI against online fraud report and my Bank I was riped off the power of the money from my a/c to the Bank of Scotland. In any case now!
  Could you help me directly with my network share domestic and the strength of my pro-sonores all of my 3 computers that seem to be fighting against each other and differences in software.
  I would like to know how to get my BROTHER DCP - 150C PRINTER VERSION 5.11 to BE CAPABLE OF WORKING WITH ALL THE 3 PC
  Thank you
  DIETER KING
  E-mail address is removed from the privacy *.

  Have you installed the printer according to the instructions of brother using the brother cd, or the complete software of brother site features?

  http://welcome.solutions.brother.com/BSC/public/EU/GB/en/model_top/colormfc/dcp150c_eu_as.html?reg=EU&c=GB&lang=en&prod=dcp150c_eu_as

• cant able to default printer brother mfc j430w?

  I have the same problem with a Brother DCP-J4110DW, however, the links in this article no longer work.

  Separate from this thread

  Hello

  Please contact Microsoft Community. I understand that you have a problem with the current printer setup. I also see that you weren't able to open Microsoft Article links proposed in the previous post. I suggest you to check if you can open the following items and try the procedure described in this. Check if it helps.

  This problem could occur due to incorrect printer settings. Try the steps listed here and see if it helps:

  Method 1:
  I suggest you to run the printer Troubleshooter to check if the base printer settings are set correctly. Check if it helps.

  Open the printer Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Method 2:
  If the problem persists, I suggest you try the steps in the article, which will be to identify and solve common printer problems in Windows. Check if it helps.

  Printer in Windows problems
  http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Method 3:
  If the problem persists, I suggest you to check if the problem occurs on a new user account or not.

  Create a user account
  http://Windows.Microsoft.com/en-in/Windows/create-user-account#create-user-account=Windows-7

  Check out the link for more information.

  
  Change your default printer
  http://Windows.Microsoft.com/en-in/Windows7/change-your-default-printer

  Hope this information helps. Reply to the post with an up-to-date report of the issue so that we can help you further.

• now that I've updated to El Capitan, my Brother DCP will not work and I can't find a driver update

  Now that I've updated to El Capitan, my Brother DCP will not work and I can't find a driver update. Everyone finds something?

  Here are the current models of Brother products which are supported.

  http://support.brother.com/g/s/ID/OS/Macintosh.html

  If your model is supported drivers will be on this page. Otherwise, contact the manufacturer and see if they have a driver for your printer from specific model for this OS. Otherwise, you may need to downgrade to a previous operating system from a backup Time Machine or a downgrade for compatibility, if it is not offered by the brother of your device to model on a computer running OS 10.11.

  Apparently not all printers DCP mind are compatible, but most that were compatible with the OS 10.10.x always conform to their page.

• How can I erase whatever it is associated with to Brother DCP-1200. It was added by mistake. I need to erase all the files on my computer related to Brother DCP-1200

  How can I erase whatever it is associated with to Brother DCP-1200.  It was added by mistake. I need to erase all the files on my computer related to Brother DCP-1200?

  You uninstall it?

  I could only partially uninstall the printer. It is not to add printers & devices more. It is not in the list of program. But he is still using a driver. Therefore, I can't fix it just delete it from the Driver list. I don't know anything else to do. Can you give me any suggestions? It makes my computer thinks that it must be installed. JoAnn

• Should Microsoft Vista drivers operate printer Brother HL-1240? I recently downloaded updates for Vista, and now I can no longer print on my printer Brother HL-1240.

  Drivers Vista MSN

  Should Microsoft Vista drivers operate printer Brother HL-1240? I recently downloaded updates for Vista, and now I can no longer print on my printer Brother HL-1240. Updates are perhaps the cause of this problem? If this isn't the case, please let me know if I get the problem somewhere else.

  Hello

  Your question is could a Windows Update may be charged a wrong Brother Printer Driver? Yes.

  One way to know is to look in the history of updates to see what has been installed and uninstall then one that seems incorrect.

  If you are an update of the Microsoft printer driver note that Microsoft updates pilot equipment for other manufacturers are not normally updated.

  Here's how to uninstall specific updates;

  http://Windows.Microsoft.com/en-us/Windows-Vista/remove-an-update

  If an update is the problem and stop it reinstall > list of updates to install > right click on the incorrect update > UAC prompt > and then click Hide.

  See you soon.

  p.s. Always get the latest updates of the driver from the hardware manufacturer.

  Also would it be a good idea if above does not work to download the last direct Brother printer driver; If necessary reinstall your printer...

  http://www.brother-USA.com/downloads/default.aspx

• All-in-one printer, Brother MFC-7840W print mixed fonts unexplained & print formats that appear in documents printed.

  I have problems printing with my Brother MFC 7840W.  The printer has been installed and uninstalled several times and drivers have.  I always have unexplained mixed fonts & print sizes that appear in printed documents.  It doesn't matter whether they are word documents or another program.  It is not the document!  This has been verified repeatedly.  Computer experts maintain that it is a matter of Vista.  Help!

  All-in-one printer, Brother MFC-7840W

  Hello

  • If it works well before?
  • If so, what were the changes made before the issue started?

  You can try to create a new user account and check. If it works in a new user account, then probably your user account have been damaged and would need a fix.

  Create a user profile.
  http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-user-account

  Now search for the question.

  Follow the link provided below to fix the damaged user profile.
  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

• Having difficulties to install printer Brother MFC-J470DW.

  I called brother Support and after two hours of trying everything they could think of, the tech told me I should call Microsoft, that the problem was with them.  When I start the installation disc, it goes only so far and then it stops.  Gets to the extent where "connect cable" and turn on your machine.  And then it just sits there doing nothing.  I tried the system recovery and it did not help.  How to get this problem fixed?

  Moved Windows 7 installation, set at level and activate Forum.

  I called brother Support and after two hours of trying everything they could think of, the tech told me I should call Microsoft, that the problem was with them.  When I start the installation disc, it goes only so far and then it stops.  Gets to the extent where "connect cable" and turn on your machine.  And then it just sits there doing nothing.  I tried the system recovery and it did not help.  How to get this problem fixed?

  It sounds like a problem to brother or one you won't easily resolved in a forum like this one and the first tip that you're going to get:

  Restoration of the machine to factory default (probably an OEM, not Microsoft, method) after the backup of your important data and collect your keys/serial installation media and product numbers.  Then install latest drivers from device hardware and all updates from Microsoft including the printer after you have restored to the factory settings (probably an OEM, not Microsoft, method) and then install all the other stuff.

  Why this review here?  If the people who made and take over the device (alone, you declare having questioned) could not fix things - and you gave NO DETAILS on what they had you try - you could lose your time here discussing the same things again without the expertise of those who intimately know their own device, wrote the software you are trying to install and tested on the operating system you try to install it on--or you could start from a State of CLEANLINESS and last KNOWN GOOD configuration and if it fails, then - be able to solve problems with those to the brother or simply return the product as a failure.

  Now - if you really think it sounds like a pain - provide details on what is and was not considered, etc..

  Other suggestions:

  If you use this:
  Full driver & software package
  ... as your starting point (this is for your device), we'll simplify and get the printer installed first.

  Simply download the driver (assuming that Windows 7 64-bit, another bit of information to provide):Printer Scanner Driver & driver for local connections

  ... chill out, go to the folder where you unzipped it so you can find the full path and...

  1. Open devices and printers, click Start , and then, on the start menu, click devices and printers.

  2. Click Add a printer.

  3. In the Add Printer Wizard, click Add a local printer.

  4. Choose a printer port page, make sure you use a button existing port and the recommended printer port are selected and then click Next.

  5. On the installation of the printer driver page, select the model and manufacturer of the printer, and then click Next.

     • Click on disk, and then navigate to the folder where the printer driver (see above).

  6. Perform the steps in the wizard and then click Finish.

  What he did add a printer to your printer list?  Can you print?

  In addition, in all their troubleshooting, they you save the driver Package & complete software and do a right click on it and run as administrator?