Problem Re-partitioning drive of Fusion after deleting Windows

Similar Questions

• No network adapter driver is available after reinstalling Windows Vista installation disk... Unable to connect to the network

  No network adapter driver is available after reinstalling Windows Vista installation disk... Unable to connect to the network

  Hello

  Know what type of network card you have and download the drivers of its supplier.

  It doesn't matter what it is always a good idea before re-install/upgrade to log on to the computer support page, download independent drivers from there and put them on a flash drive.

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• "Hard drive - (3F0) BootDevice not found" after deleting Windows

  Hello.

  I have a ProBook s 4530 accompanying pre-installed Windows 7 Home Premium. I'm a Linux user for a long time, so the first step that I took after the purchase was reducing the OS partition and install Arch Linux on the free space created. I used the laptop in this configuration for something like a year now, but since I rarely even start on Windows, I decided to save free space by deleting them entirely. You use cfdisk, I deleted their partitions.

  After a short time (about a day), I got off the machine, and I found a few old labelless CD I wanted to inspect. I started the calculated and inserted in the drive. It was obvious that it was a Windows XP installation CD, so I turned off the computer (before it has completed the phase of loading drivers).

  (It is likely that the previous paragraph is unrelated to the error message, because the installation should not even touch the disk at this stage.) I also do not restart often, so I'm not sure that makes the computer startup between the removal of the partition and start the Windows XP CD.)

  The next time I tried to start the PC, I was greeted with "Hard Disk - BootDevice (3F0) not found." All HP diagnostics were OK, and when I loaded GRUB on a live Ubuntu CD to my hard drive, it starts normally.

  I admit the BIOS could be confused in some way by the partition table I, it starts with lots of free space and has no NTFS partitions, but I think that BIOS should not depend on the OS that I run. So, I have a few questions:

  1. The HP BIOS is trying to detect Windows, and it doesn't do anything differently if it does not find Windows hard disk? I googled around and did not find anyone with experience running as Linux on my laptop (just dual-boot).
  2. If so, is there some way I could convince them to begin the hard drive even through it is not Windows on it?

  Thank you.

  Then he turns the laptop was confused because no partition has been marked as active. My bad.

• problem with connection to the internet after installing Windows 7 on new hard drive

  I have problem with old hard drive, so I change. I replace it with a new drive of the same size, so I download the Windows 7 disc to reinstall it. I received the product from the bottom of my laptop key. all look good, until when it is I can't connect to the internet. I can't find also manage network connections on my computer. When I go to "change the map settings" nothing is there. "when I go to connect to the network, not connected to the top pop, then I'm going to shoot bad to say" windows did not detect a network card installed properly, if you have a network card, you will need to re install the driver. "windows can't find a driver for your network card. Please help my fix to this problem. Thank you.

  You must download and install the driver for your network card.  It is best to get it fron the computer manufacturers web site.  You will have to get on another computer and copy it to a Flash DRIVE or a CD to run on your.

• Create record problem in the JHS LOV popup after deleting record

  JDeveloper: Studio Edition Version 11.1.2.2.0
  Jheadstart: 11.1.2.1.28
  
  Hello
  I sent a unit test to [email protected]
  in the pop - up JHS lov window when I delete a file and then, I want to create a new record, it's not working
  but when I click in a field and then click the more icon, it works correctly

  OK, this happens because the code that sets the question to delete that I sent you before. This code must be modified slightly, the following lines:

  Line = selectedRowData.getRow ();
  If (! isMultiSelect())
  {
  make the current line, so removing line will operate in page LOV
  selectedRowData.getIteratorBinding () .getRowSetIterator () .getRowSet () .setCurrentRow (row);
  }
  selectedRows.add (new RowData (row));

  should be closed with a check, if there is a selected line:

  If (selectedRowData! = null)
  {
  Line = selectedRowData.getRow ();
  If (! isMultiSelect())
  {
  make the current line, so removing line will operate in page LOV
  selectedRowData.getIteratorBinding () .getRowSetIterator () .getRowSet () .setCurrentRow (row);
  }
  selectedRows.add (new RowData (row));
  }

  Steven Davelaar,
  JHeadstart team.

• Efi partition damaged or corrupted after installing windows 10

  Well, I had another post on this subject, but I decided I want to start a new thread that I have eliminated a lot of things and feel that I reduced it down to start EFI partitions.  Here is the fall back on what has caused all this. I had a copy perfectly fine working of Windows dualbooted with Ubuntu 10. The two operating systems works great and I have not had any problems with resetting. After updating to win10 everything was peachy, but there were a few complications with grapchics drivers so I decided to do a clean install and just drag all the old baggage, which has solved THIS problem. However, when I did that, without thinking I just deleted all partitions and let the windows installation program re-create them. Which included the efi boot partition. However, windows 10 must have done something wrong with the efi boot partition because after that, I was not able to make a good restart of the operating system. Problem with Ubuntu I have installed next to her. However! I can make a stop and turn on just fine and the issue only happens when I try to reboot from an OS. I can reboot from the BIOS and for updates it occasionally resumes once, but consecutive reboots lands me to the ACER screen curtain. I can hear the hard drive Park and it does not load all simply the operating system or the bootstrapper.  I think I'm getting a bit lengthy, so I'll just mention that I've eliminated.

  Verified and tested Ram - Ram is OK

  Update Bios - Bios is fine (restarted just dandy in the process)

  Faststartup disabled - not the question

  Unplug all usb devices - nope

  Restart in diagnostic mode - nope

  safe mode - nope

  The only thing left I can think of is the only thing that I know for some changed... This efi boot partition.

  Is there a way to repair this or recreate a new in the hope that it will get done right short to reinstall everything?

  I know it is really old now, but I thought that I shouldn't keep starting probably new threads for the same problem.

  So I went through all of this and no change. Clean the disc as instructed, I tried right linux, using the recovery disk to restore to as it was from the factory and win10 once again but no dice on this, I have created. It does not restart. But I remembered something I did at the same time I forgot because it seemed really trivial. I have problems with my wifi connection drops pretty frequently and suspect interference as well as map of the factory did not offer the 5 GHz band, I replaced it with an Intel Ultimate N card I had lying around from a previous laptop. Who would possibly spoil reboot? I don't think that would interfere with it, but it's the last thing that could have changed. However, the laptop is a model of AMD. So, hmm, I guess I can try to Exchange on the map of the factory, now.

• Problems of Jet 7 HP recovery after installing Windows 10 TP

  Hi all

  A month ago I bought the HP Jet 7. Soon after receiving it, I installed Windows 10 TP, without first create and save an Image of the system to an external drive recovery. While playing with Windows 10 TP, suddenly the touch screen doesn't work anymore, as well as WLAN. The SD card is not recognized eiter (and I can't boot from it). I now can with Windows only when you attach an external USB keyboard. I can't get into the BIOS (power-Volume-down).

  I tried to go back to Windows 8.1, so far without success. I tried the regular Windows recovery mechanisms - all fail. When booting from a USB 2.0 with 8.1 32-bit of Windows Installer source attached to a USB hub powered by bus, at least, I'm able to boot, and I see that your partition 4 is a recovery partition. Yet, when you mount the partition (via DISKPART) to check for recovering images in the 'Images of Windows' folder I only get "access denied".

  Does anyone have tips on how to do to get my stream of HP 7?

  Thanks for reading!

  / Maurice

  Hi all

  After you remove all of the partitions and create the recommended UEFI/GPT partition , I was finally able to install Windows USB 8.1. I guess the reason for all the facilities prior to failure were remnants of W10 Technical Preview (for example, recovery or similar tools). So in short: I had to wipe the hard drive to a successful downgrade.

  -Maurice

• G50 - 45 - problem with Blue Tooth and companion after upgrade Windows 10.

  Hi all. Hope you can help.

  I have improved this laptop a few days ago to the windows 10 64 bits.

  In general, everything is fine,

  There are 2 problems on the left:

  (1) Bluetooth does not work. It does not help to install the driver provided for Windows 10 on the site of the G50-45. I tried several times without success. Someone at - it an idea how to solve this problem?

  (2) Lenovo store Windows companion does not work. What should do?
  Thank you

  Wolfgang Haberl

  Mod edit: additional information added to the subject line to clarify the problem.

  Hi Menna,

  I tried your link, donloaded the software and everything has been installed.

  Still, Bluetooth does not work or worse: now components 3 Bluetooth which can be see in hidden devices aren't there anymore.

  I don't know what to do to get my bloetooth module work.

  Wolfgang Haberl

• HP TouchSmart 15-j003ed USB 3.0 Controller ENVY & LAN driver not working after installing Windows 7

  Hello

  A month ago I bought a TouchSmart from HP ENVY 15-j003ed. After that I installed Windows 7 Professional 64-bit, the USB 3.0 controller and the LAN port does not, even when I use the drivers from the HP website.

  All the other drivers work, how is it possible, and at - it someone has a solution for me?

  Now I only use Wi - Fi to connect internet and changed the USB controller in the BIOS to USB 2.0

  Please try the PCIe GBE 10/100/1000 Realtek RTL8111B / RTL8168B / RTL8111 / RTL8168 / RTL8111C / RTL8111CP / RTL8111D (L) / RTL8168C / RTL8111DP / RTL8111E / RTL8168E / RTL8111F / RTL8411 drivers directly from Realtek - http://www.realtek.com/downloads/downloadsView.aspx?Langid=1&PNid=13&PFid=5&Level=5&Conn=4&DownTypeID=3&GetDown=false

  and

  Intel USB 3.0 xHCI driver directly from Intel-

  https://Downloadcenter.Intel.com/SearchResult.aspx?lang=eng&ProductFamily=software+products&ProductLine=chipset+software&ProductProduct=Intel%C2%AE+USB+3.0+Extensible+host+controller+driver

  Please click the White Star of KUDOS to show your appreciation

• Problem with slots Usb not work after installing Windows 7

  Hi all

  I just had a guy fix my brand new computer, after that it was abandoned due to an accident than an anne 5. I told him that I wanted Windows 7 installed on the computer instead of 8. He did and got it all and running, no seven complaints only 1 usb slot works now and don't rest. Question is how can I solve this problem? I tried unistalling and reinstalled it a nothing still.

  Want HP dv7-7230us

  Product #: c2n66ua #aba

  Possible the AMD Chipset is required - includes the drivers for the USB 3.0 ports:

  http://support.AMD.com/us/gpudownload/Windows/pages/raid_windows.aspx#2

• CD/DVD drive not working after reinstalling Windows

  CD driver error

  Hi, I had recently formatted my pc (laptop) and everything was fine until I tried to use my cd/dvd driver. I tried to run a disk .iso that I burned and used in the past, but with no succsess. I thought that maybe it was damaged or something like that, but when I tried to play the Cd or other Dvd it them played normally... It also seems that I can't burn to cd/dvd do anything now... then it's a hardware or software problem? How can I solve it?
  PS.i check the cd in my other computer and Word very well...
  System: computer laptop vista 32 bit driver cd/dvd TS-L633A ACOO

  Hello

  you start from an ISO file

  Make sure you have the latest vista drivers for your computer which you can get your computer manufacturers Web site

  go to their website and look for a driver and software download section

  Enter your model number for the last look drivers vista then download and install

  If only it does not correct

  Try the microsoft 'fix - it' for your problem below

  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

  and read this information too

  http://support.Microsoft.com/kb/982116/en-us

• Problems installing HP Deskjet F380 printer after installing Windows Vista Service Pack 2

  OUR SYSTEM: Vista Home PREMIUM "Service PACK 1, 32 - bit, WE installed Service Pack 2, after that, we try to download & install" HP Deskjet F 380 all-in-ONE printer, BUT could not because the installation not completed & failed.

  Original title: having the problem after installing Service Pack 2

  We recovered our system to 'Out of BOX STATE' MEANS that WE BECAME NEW SERVICE PACK 1, WE SUCCEED to INSTALL OUR HP Deskjet F 380 & work properly, YESTERDAY we RECEIVED THIS YEAR IMPORTANT UPDATE IS AVAILABLE THAT IS "Service Pack 2 (KB 948465).

  Please notify can DOWNLOAD us & INSTALL SERVICE PACK 2. WITHOUT OUR INSTALLATION OF THE

  HP Deskjet F 380.

  YOUR ADVICE WILL BE VERY MUCH APPRECIATED

  Hi man chic,

  1. This only happens when you try to install the printer HP or with other programs?

  Step 1:

  Before you install Windows Vista SP2, uninstall completely printing software.

  Check out the link to uninstall a program:

  http://Windows.Microsoft.com/en-us/Windows-Vista/uninstall-or-change-a-program

  Step 2:

  After installing SP2, try to install the latest version of the drivers available for the printer and the printer and check if it helps.

  Links of HP:

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=2093&LC=en&cc=us&DLC=en&sw_lang=&product=1128296

  http://h10025.www1.HP.com/ewfrf/WC/documentSubCategory?tmp_rule=14481&LC=en&DLC=en&CC=US&OS=2093&Rule=13237&Product=1128296&sw_lang=

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Problem reading HP DV5T Blu - Ray after upgrade windows 7

  I have HP Pavilion dv5t-1000 CTO Entertainment Notebook PC (Vista) with the Blu - Ray player. We use to watch Blu - Ray using Quickplay movies without any problem.

  But after upgrading to Windows 7 last month, quickplay plays are more Blu - Ray movies. It just hangs. I tried to upgrade Quickplay, installation HP Media smart, but nothing seems to work.

  There seems to be no update firmware or updates specific windows 7 blu - ray to the HP support site.

  The whole subject seems to be difficult, mystery and disappointing.

  Is there a solution? Can I pick up my blu - ray reading?

  Help, please!

  HaggisCat thanks for your reply.

  Perfect, this fixed the problem. The blu - ray disc now plays perfectly.

  I have 32-bit Windows and my NVIDIA GeForce 9 M version of the pilot was 179.04.

  I let NVIDIA site to automatically detect and recommend the pilot, and he recommended the latest version 258.96.

  I was able to install it on top of the other oldest successfully.

  Thanks for your help, appreciate it.

• HP pavilion dv 2700 notebook: driver coprocessor missing after clean windows 8.1 installed

  Original operating system was Vista.  Then uped to 8.1, worked great, although missing some programs.  Windows 10 resulted in a very poor video playback.  Tried to goback to 8.1, did not work.  Hard disk formatted, installed then 8.1 full version.  Now missing driver coprocessor. Impossible to find. Don't have original disk with Vista.

  Hello:

  When you see a coprocessor device, this means that your notebook is the processor amd and nvidia chipset.

  Install the chipset nForce Vista driver and you should be ready.  You may need to install manually if auto installation does not work.

  I don't see the correct chipset for any model dv2700 pilot, so use this one from a dv6700...

  This package provides the driver for the NVIDIA nForce Chipset AR in the notebook models and operating systems.

  File name: sp37730.exe

• The driver installation fails after custom Windows 7 Pro install

  Hi all.  I just replaced the drive hard on my ProBook s 4440 as the original, one crashed unexpectedly.  I then reinstalled Windows 7 Professional but now have no way to connect to the internet.  I installed the driver of "Sierra Wireless Driver Package for add-on unit high flow Mobile HP un2430", but I still see the message "no connection is available" when I try to connect to my wireless network.  By Device Manager, I'm still missing the drivers for the following (hardware IDS are in brackets):

  (PCI\VEN_197B & DEV_2392 & SUBSYS_17F3103C & REV_30) base system device

  (PCI\VEN_10EC & DEV_8168 & SUBSYS_17F3103C & REV_07) Ethernet controller

  (PCI\VEN_1814 & DEV_539A & SUBSYS_1839103C & REV_00) network controller

  Controller of communication Simple PCI (PCI VEN_8086 & DEV_1E3A & SUBSYS_17F3103C & REV_04)

  (PCI VEN_8086 & DEV_1E31 & SUBSYS_17F3103C & REV_04) USB controller

  Any help or advice would be greatly appreciated.  Thank you!

  Hello:

  You need the following drivers:

  http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=5229486&prodNameId=5229488&swEnvOID=4059&swLang=13&mode=2&taskId=135&swItem=ob-111787-1

  http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=5229486&prodNameId=5229488&swEnvOID=4059&swLang=13&mode=2&taskId=135&swItem=ob-111305-1

  http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=5229486&prodNameId=5229488&swEnvOID=4059&swLang=13&mode=2&taskId=135&swItem=ob-116003-1

  http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=5229486&prodNameId=5229488&swEnvOID=4059&swLang=13&mode=2&taskId=135&swItem=ob-110949-1

  http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=5229486&prodNameId=5229488&swEnvOID=4059&swLang=13&mode=2&taskId=135&swItem=ob-113862-1