Problem reading Olympus IX-81 VISA

Similar Questions

• Error message - problem reading disc on Satellite

  I wonder if anyone can help. Was a virus on my laptop satellite scan to home (don't remember the model) 2 days ago, when the screen is blue and it was a mistake long message means the laptop has encountered a problem and stops.

  After that 2 hours, that the cell had not yet arrested so disconnected from the electrical network and removed the battery. To try to restart the computer, an error message pops up saying - CTRL + ALT + DELETE to restart problem reading disk. When I made the order it seemed be restart but then returned to the original statement of CTRL + ALT + DELETE. Tried again and amel and can't stand up boot.

  Someone had this problem before?

  Hello

  It seems that it's not possible access to the HARD drive or it is not possible to read the data on the HARD drive.
  I don't know why it happens, but first of all, you should check the boot sequence in the BIOS. If everything shows ok, so you should try to start form the OS cd and check if it is possible to install the new OS.
  If this is not possible if the HARD drive has a fault and you need to replace.

• Problem reading text file

  CVI programmer for several years, but it has been awhile. Trying to read in a text file that displays fine in say Notepad. The first line of text in the file is:

  All temperatures in ° F.

  If I use the scan function, say:

  public static char cdum [2048];

  ScanFile (DataFile, "%s > %s", cdum); I get these results:

  cdum [0] is - 2

  cdum [1] is 65 (which is the ASCII character 'A')

  The rest of the cdum is all zeros.

  In a hex editor in decimal display grouped by bytes, the line is:

  0 255 254 65 0 108 0 108 0 32 0 116 0 101 0 109 0 112... as the display looks like

  ybA.l.l.. t.e.m.p.e.r.a.t.u.r.e.s.. i.n.. °. F....

  So I get the scan function is to see the start character, then by pulling the 65 and placing in the location cdum [1], then strikes the character 0 and leaves the function of scan as she found an end of line. Trying to read in the entire line and the subsequent data float line, but is not serious, I can understand that our after I get over the initial problem above.

  Can someone help me with this? I have no problem reading in ordinary text files, but this one is as it is grouped in words rather than in bytes. Have you tried a bunch of different Scan function modifiers source and target [xt0, w #, etc.], but nothing seems to work.

  Data file attached.

  Thank you-

  Scott

  Hello

  I downloaded your file, it is opened in Excel because of its extension and the settings on my computer. I then wanted to save it as a text file normal to see in Notepad and read with a simple C program. In doing so, Excel told me: some features in your workbook may be lost if you save it in Unicode text.

  This is consistent with your observation of 16-bit data.

  LabWindows/CVI, unfortunately, does not support the Unicode character set and functions of the library operated at only 8-bit characters.

  So I would say to convert your file to 8-bit characters; You can also support the pursuit of the Unicode support in CVI here

• Problem reading the worksheet after you use a DLL to write on the worksheet

  Hello

  I have a few problems reading a sheet DLL created in LabVIEW. The DLL is written in C++.

  I'll dexcribe what do the VI in the screenshots:

  For DLL_INIT = the first false steps the VI (LabVIEW) values and exports in a DLL initialization.
  DLL takes these values and not some und calculation, then wrote the measured values and the new calculated values in a csv file called 'filtered_values' and a file 'filtered_values_complete '.
  so, I have two files like this after initialization:

  1.0000000000; 1.0000000000; 18.8991610737; -3.2940000000; 0.0060000000; 0.9000000000; 6.5806287097; -3.2940000000; 1.0000000000; 0.0000000000; 1.0000000000; 0.0000000000;

  So now on DLL_INIT = true.
  For the calculation, the next step i read the "filtered_values" - file (LabVIEW), calculate the new values and write in filtered_values (DLL)
  And in the "filtered_values_complete" - file I will allways read the DLL entry first, so that I can check later, if the DLL has obtained the values to the right of the front step and then add the calculated values.

  For i > 0 initialization has been made:
  -the VI bed sheet "filtered_values" calculation and rotted the table 1 d in its unique values
  -The last seven values in the worksheet have been exported in the dll as well as five new measured values.
  -This DLL is still a few calculation
  - then it replaces the "filtered_values" - file and adds a new line to the 'filtered_values_complete '.

  This migth be a bit of confusion, so a small example, afer five steps it loooks like this:

  filtered_values:
  5.0625000000; 1.0000000000; 18.9300200447; -3.2870000000; 9.7320000000; 0.8997597592; 5.9159054233; -2.6533532901; 1.0000000400; 0.0000000000; 0.8078703403; 0.0000000000;

  filtered_values_complete:
  1.0000000000; 1.0000000000; 18.8991610737; -3.2940000000; 0.0060000000; 0.9000000000; 6.5806287097; -3.2940000000; 1.0000000000; 0.0000000000; 1.0000000000; 0.0000000000;
   
  2.0625000000; 1.0000000000; 18.8330081064; -3.2940000000; 9.7270000000; 0.9000000000; 6.5806287097; -3.2940000000; 1.0000000000; 0.0000000000; 1.0000000000; 0.0000000000;
  2.0625000000; 1.0000000000; 18.8330081064; -3.2940000000; 9.7270000000; 0.8999399568; 6.4077416273; -3.1451829134; 1.0000000100; 0.0000000000; 0.9480589053; 0.0000000000;
   
  3.0625000000; 1.0000000000; 18.7932988441; -3.2870000000; 9.7280000000; 0.8999399568; 6.4077416273; -3.1451829134; 1.0000000100; 0.0000000000; 0.9480589053; 0.0000000000;
  3.0625000000; 1.0000000000; 18.7932988441; -3.2870000000; 9.7280000000; 0.8998799074; 6.2394046705; -2.9768465052; 1.0000000200; 0.0000000000; 0.8988158138; 0.0000000000;
   
  4.0625000000; 1.0000000000; 19.0445703499; -3.2870000000; 9.7320000000; 0.8998799074; 6.2394046705; -2.9768465052; 1.0000000200; 0.0000000000; 0.8988158138; 0.0000000000;
  4.0625000000; 1.0000000000; 19.0445703499; -3.2870000000; 9.7320000000; 0.8998198333; 6.0754981785; -2.8129479844; 1.0000000300; 0.0000000000; 0.8521305805; 0.0000000000;

  5.0625000000; 1.0000000000; 18.9300200447; -3.2870000000; 9.7320000000; 0.8998198333; 6.0754981785; -2.8129479844; 1.0000000300; 0.0000000000; 0.8521305805; 0.0000000000;
  5.0625000000; 1.0000000000; 18.9300200447; -3.2870000000; 9.7320000000; 0.8997597592; 5.9159054233; -2.6533532901; 1.0000000400; 0.0000000000; 0.8078703403; 0.0000000000;

  So it's good enough that the VI and it works fine until some point when the just VI reads more calculation and x = sheet! There? becomes true.

  Most of the time it happens when the csv file is about 1200 lines

  Someone knows why this happens?

  Best regards

  Stefan

  Hello

  understood, that the error occurs somewhere completely else. the thread may be closed

  BR

  Stefan

• I have install fallout 3 and the last update (1.7), but when starting a new game, he tell me that windows is having a problem reading it & then it locksup.

  original title: game Fallout 3 on Windows 7 problem

  I have install fallout 3 and the last update (1.7), but when starting a new game, he tell me that windows is having a problem reading it & then it locksup, I have a Toshiba Satellite, Fallout New Vegas works perfectly on my laptop, how can I play Fallout 3, is here to play Fallout 3 on windows 7.

  Hello

  You can see the link provided. It gives information that Fallout 3 is not compatible with Windows 7.

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/search.aspx?l=en-us&type=software&s=fallout%203%20

  Windows 7 Compatibility Center: Fallout 3 http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/search.aspx?l=en-us&type=software&s=%20Fallout%203&OS=32-bit

  You may need to contact the manufacturer of game for support

• Error when you try to play audio files: Windows Media Player has encountered a problem reading the file. for further assistance, click web help

  8007007E tips

  There is also another number which is C00D11B1, but both have to do with the lock of the music in windows media player, the message said:-"Windows media player has encountered a problem reading the file; for help click web help. ""- and that of all, but when ' web help ' click on the show numbers that are 8007007E and C00D11B1 and average music, not Windows media player, y at - it someone with the same problem that has been able to solve? Thank you, let me know, if you don't mind, thank you again.

  I suggest re-download you WMP 11 from the following link and install it on top of the current installation:

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=1d224714-e238-4E45-8668-5166114010ca

  Who help me?

  If this isn't the case, please report the file type (extension) of the file you are trying to play. For instructions on how to make Windows Explorer shows the file types, see this link:

  http://www.windowsreference.com/Windows-XP/how-to-view-all-file-extensions-in-Windows-XP

• Problem reading Audio of WMP11 after you increase the playback speed.

  Original title: problem reading Audio of WMP11

  I'm using Windows Vista 32-bit with Windows Media Player 11. After awhile, my music sounds like it is blurred. Specifically, sometimes while I increase the playback speed. This happens on 2 different computers, so I excluded a possible card problem.

  EDIT: I forgot to mention, all the parameters are normal, and all the improvements to my device are disabled.

  Make sure that disable all improvements is checked, as suggested at http://windows.microsoft.com/en-US/windows-vista/How-do-I-stop-my-music-from-skipping-or-breaking-up-when-I-play-it . Tim Baets
  http://www.BM-productions.TK

• Adobe Acrobat 10 error: there was a problem reading this document (131)

  I use Adobe Acrobat 10.

  One of our users is getting this error: there was a problem reading this document (131).

  Help, please.  Thank you.

  Hi susanh24700854 ,

  Could you please if this is the case with specific files or other files as well?

  What operating system installed on your computer?

  Would it not possible to share files with us, so that we can check it out at our end?

  I have you send a private message for the same, please respond to this message.

  Thank you

  Shivam

• Problems reading Premiere Pro CC 2015

  Hello

  I currently have problems reading on Premiere Pro, as it does not return at all. It worked perfectly on the previous version.

  I tried to reinstall and I did the setting change of mercury reading I found something else when, in the forums but I have more questions, can someone shed light on this please?

  Thank you

  Lewis.

  Hello Grayster VGA,

  I currently have problems reading on Premiere Pro, as it does not return at all. It worked perfectly on the previous version.

  EDIT: Please install the update of first Pro CC 2015 (9.0.1). It fixes problems playing more covered in this thread.

  If the update does not resolve the problem of reading you have on a current project, try a new project and see if playback resumes to normal. For any other problem with the update, please create a new position or open a folder with our support on the "video" queue agents: Contact customer service

  ----------------------------------------------------------------------------------------

  If the solutions listed here do not help us:

  • Is this a project 2014 CC that you updated to 2015 of CC, and you have no problem with the same images in a new project of CC 2015?
    • You may have a corrupted project 2015 CC and probably continue to experience unexpected behavior so that editing and export.
    • If so, you must return to first Pro CC 2014.2 via Final Cut Pro XML
    • In your CC 2015 project, choose file > export > Final Cut Pro XML and open this file in first Pro CC 2014.2
      • If the first Pro CC 2014 has been uninstalled, see these instructions to reinstall.
      • Update the application to the latest version of CC 2014 by choosing Help > updates
      • Note that only your changes will be preserved. You need to rebuild the project items before continuing work. Effects and transitions are not included in this translation.
      • Protocol for editing in general, it is not recommended update project files you're working on currently. See this blog post.
  • Is this a new project of CC 2015?
    • Work with our agents. Chat with an agent here.
    • Ask the video queue. They are available M - f 07:00 to 19: 00 PST.
    • Open a folder and note the file number.
    • If they cannot help you, MP me by clicking on my name in the upper left corner of this message and click on "Message" on my profile page.

  Thank you
  Kevin

• Problem reading first

  When I was with the previous version of first (2014) I had a problem reading the sequence in my calendar. For some reason, ensuring that the resolutions of playback and pause were the same throughout is starting to work again.

  I recently installed first 2015. Sometimes I can reread my calendar with ease... but most of the time when I hit 'play' nothing happens.

  
  

  I read a lot of forums and tried everything what they suggest. I've updated the video card driver, I turned thumbnails on and outside, I rebooted several times, etc. - nothing works.

  If anyone has any suggestions, it would be great! I work on short deadlines and need to understand that soon!

  If it helps, here are the specs of my computer:

  • MacBook Pro (15-inch, mid-2014, retina).
  • OS X Version 10.10 Yosemite
  • Intel Core i7 2.8 GHz
  • 6 GB 1600 MHz DDR3
  • NVIDIA GeForce GT 750M 2048 MB

  Ok. Try to create a new project of CC 2015 and to import your CC 2014 project inside. Until you do this, trash the cache for your media files. If they are not beside your multimedia files, check the media Cache folder preference in Premiere Pro before. Delete the cache files with Premiere Pro closed using the operating system's File Explorer. When you create a new project and import the old inside, your cache files will be created.

  The fact that you are sometimes able to play and sometimes not suggests that it is not the hardware preferences, which have been a common problem with CC 2015 and other that we are working on the resolution. Since it is intermittent with your configuration, we will try the cache files and see what happens. Thanks for sticking with me!

• "There was a problem reading this document (15)", and I could not remove one of my pages. It's never happened before.

  I tried to delete some of my pages. but I did not like he showed it: there was a problem reading this document (15), how I could solve it?

  Sometimes if you again save the document, close it, then reopen it, you can work around this problem. Re-register it will sometimes seem to resolve corruption as long as the file is readable.

• Whenever I try to save a PDF file using Adobe Acrobat DC (Version 15.1), I get the error "the document could not be saved. There was a problem reading this document (21). »

  Whenever I try to save a PDF file using Adobe Acrobat DC (Version 15.1), I get the error "the document could not be saved. There was a problem reading this document (21). "When I click ok, an error message appears saying:"insufficient data for an image. "I tried to do a repair on Acrobat, but it has not changed anything. I also tried some updates, but nothing that is. I did hours of research on the Internet and have found nothing so far. Does anyone know why this error keeps appearing?

  Thank you!

  Hi all

  This problem has been corrected and is implemented to come or update.

  Kind regards

  Rave

• I just reinstalled Adobe Acrobat X 1 and I can't save files PDF that is sent to me. I just get "this document cannot be saved. There is a problem reading this document (21)"and then when I click OK I get 'not enough for the image' help!

  I just reinstalled Adobe Acrobat X 1 and I can't save files PDF that is sent to me. I just get "this document cannot be saved. There is a problem reading this document (21)"and then when I click OK I get 'not enough for the image' help!

  More information on this issue can be found here:

  https://forums.Adobe.com/thread/1672655

  A "quick" fix that worked for me was to uninstall Adobe... and download Adobe Reader 11.0 installation base.

  Then download each individual updates and run them sequentially.

  I installed back to the last update of security which is version 08 and were able to register under normal operations.

  You will need to disable the automatic updates to keep up with the 08 version, until Adobe fixes this problem in a future release.

  http://www.Adobe.com/support/downloads/product.jsp?product=10&platform=Windows

  Adobe Reader 11.0 - installer multilingual (MUI) AdbeRdr11000_mui_Std

  Adobe Reader 11.0.01 update - installer multilingual (MUI) AdbeRdrUpd11001_MUI.msp

  Adobe Reader 11.0.02 update - all languages AdbeRdrSecUpd11002.msp

  Adobe Reader 11.0.03 update - installer multilingual (MUI) AdbeRdrUpd11003_MUI.msp

  Adobe Reader 11.0.04 update - installer multilingual (MUI) AdbeRdrUpd11004_MUI.msp

  Adobe Reader 11.0.05 - all languages AdbeRdrSecUpd11005.msp security update

  Adobe Reader 11.0.06 update - installer multilingual (MUI) AdbeRdrUpd11006_MUI.msp

  Adobe Reader 11.0.07 update - installer multilingual (MUI) AdbeRdrUpd11007_MUI.msp

  Adobe Reader 11.0.08 - all languages AdbeRdrSecUpd11008.msp security update

• Message from the AR - "the document could not be saved.  There was a problem reading this document. »

  I have a PC and downloaded a file from a site that I use frequently.  When I tried to save the file, I got the message, "the document could not be saved.  There was a problem reading the document. "" When I clicked on ok, a new message appeared, "" out of memory ".  My computer has plenty of available storage.

  I would be so grateful for any assistance.

  The most likely problem is that your temporary file area is full. You can make in your temp directory and empty the file manually. The other possibility is that the file is corrupted.

• In the browser of Muse CC edition there was a problem reading the manifest file Adobe Muse CC for the site - how to fix this?

  I just uploaded the site via the built in ftp upload in muse he then uploaded successfully. When I go in the edition of the browser and enter the name of the site (mernaliddawi.com) it says then this "there was a problem reading the file of Adobe Muse CC manifest for the site. Since Adobe Muse CC use file > load on the FTP host... to export the new site. ' I then exported the site again, but it still does not work also, I went my hosting provider file manager and deleted the file muse_mainfest.xml and then re uploaded still no chance. " How can I fix this thank you, james.

  You need to transfer your domain to your new site. At present, the URL http://mernaliddawi.com/ is a web page that encapsulates the http://mernaliddawicom.ipage.com/ in a frameset. This isn't how a domain is successfully transferred. He doesn't bother with editing in the browser, will prevent redirection to versions Tablet and phone of your site (if you create), and can cause other problems.

  If you enter mernaliddawicom.ipage.com to inbrowserediting.adobe.com it will not work, because this is the URL where your site is currently hosted.