Problem recording with RD-XV48DTKB

Similar Questions

• Problem recording with Pix 506

  Hello

  I have an old pix 506, it has been disconnected for a while and now I feel I want to use. But I forgot the password, I can ping from the port to my pc but I can't ping from pc-to the pix.

  No idea how to reset the password or delete it there or return to the default factory setting.

  Thank you

  See this document:

  Password Recovery and AAA Configuration procedure of recovery for the PIX

  http://www.Cisco.com/en/us/products/HW/vpndevc/ps2030/products_password_recovery09186a008009478b.shtml

  Factory reset after the recovery of password:

  write erase

  reload

  sincerely

  Patrick

• All of my 10-20 second mp4 to wmv (via FormatFactory) videos will be 1000 minutes s growing to record with WMM. Is this a common problem?

  All of my 10-20 second mp4 to wmv (via FormatFactory) videos will be 1000 minutes s growing to record with WMM. Is this a common problem? Help, please!

  This will happen if you add a single .wmv file converted to the timeline?

  Does make a difference if you are going to... Tools / Options /.
  Tab compatibility... and left click Restore all default settings?

• Problem when trying to watch a webinar recorded with Windows Media Player

  I get an error saying that Windows Media Player cannot play the file. A network firewall might prevent the player to open the file by using the UDP transport protocol. If you typed a URL in the open URL dialog box, try using a different transport protocol (for example, "http:").  I'm watching a recorded webinar and may not have to work, can anyone help?

  Hi Flinnwin,

  Welcome to the Microsoft community. According to the description of the problem, you can't watch a webinar recorded with Windows Media Player. Provide the following information:

  ·         Did you do changes on the computer before the show?

  ·         You get the error message?

  ·         What is the file format?

  I'll help you with this problem. I suggest you to run the Windows media player settings Troubleshooter.

  I hope this helps. Let us know if you need help with Windows.

• Satellite U400 PSU44E: Impossible record with Conexant Smartaudio 221

  It has been possible to record audio streams on the net with Audacity.
  After an upgrade to Windows 7 and updates for the drivers it is no longer possible. The sound has disappeared. Of course, I can always save the stream off the card, but only at a very very poor quality.

  It is a problem of Toshiba and sound card. I can still save on my other computer with another sound card. As I need to register to work, it is a serious problem for me, and there should be warnings when customers update.

  Is there a way to get around this? Are there patches?

  Guenter

  Hey,.

  Before you start a lengthy discussion, can you please put the number of exact model of your laptop?

  If you have this problem only with the new sound driver you should go back to the previous version of the driver ;)

• I can't record with sound recorder?

  I tried recording with tape recorder, but it says that I record with another application, but unfortunately I'm not recording with another application. Why is this happening? It's the same thing in camstudio. Please help me with this problem, I need start recording.

  Something is hijacking your system.

  Run your anti virus and anti malware.
  Download the latest audio drivers for your device from the site of the manufacturer. Do not install yet. Also download Ccleaner (Google it).
  Remove all references from your audio device (software and drvers).
  Re starting and running ccleaner, registry bit - but back up your registry first, and the value of a restore point, just in case.
  Re install your software and audio divers, re boot, everything should be ok.
  See you soon
  Jerry

• Impossible to record with Audacity

  Screen turns off after a certain time when no keys used - Audacity to stop recording?

  When you are recording in Audacity, the screen is blank after a few minutes, and the recording is interrupted. This means that I have to keep close to the computer and press a button from time to time. Any help would be greatly appreciated.

  Jim

  Maybe the problem is with your power management settings:

  The following article can offer a few ideas:

  Disable on Windows 7 or Vista power management
  http://www.howtogeek.com/HOWTO/Windows-Vista/disable-power-management-on-Windows-Vista/

• The Sound Recorder with W7 now seems much more rudimentary than the old version, and I can't find any way to insert messages into My Documents.

  My O.S. is W.7. 32-bit.

  Before, I recently upgraded to XP and using MS Word 2007, I have a (short) Sound Clip of pre-registration<60 secs. )="" and="" then="" insert="" it="" into="" my="">

  A small icon that looks like a speaker appeared on the Document and that the beneficiary would have left click on it to hear the recording. The Sound Recorder with W7 now seems much more rudimentary than the old version, and I can't find any way to insert messages into My Documents.

  Is this even possible or has Microsoft taken a step backward here?

  I'd appreciate some help here. Thanks in advance. Mech-Tech.

  Original title: Sound Recorder

  If I've understood your problem, try this. Create a shortcut to "soundrecorder /file outputfilename.wav" (without the quotes).

  Then start soundrecorder via this shortcut and start and stop the recording, it will save so (hopefully) as a wav as before.

  I think the problem is, W7 soundrecorder, by default, saves to wma.

  If not, try a 3rd free part program such as Audacity (which seems like overkill, but should do the job).

  I hope this will help.

• Found "Save as model" grayed out and cannot save. Recorded with .dwt but saved them "model" does not present as a "site template. Can anyone help? Thank you.

  Found "Save as model" grayed out and cannot save. Recorded with .dwt but saved them "model" does not present as a "site template. Can anyone help? Thank you

  I found the problem. I opened 'File' then saw 'save as template' grayed. Having not worked with models, I didn't know this isn't how it's done.

  What I should have done was file > save as > then clicked the drop-down 'Save as template' menu option. It was a simple mistake. Thanks to you all.

• one-to-many selfjoin, delete records with the same rank or a substitution

  Sorry for my poor choice of the title of the discussion, feel free to suggest me a more relevant

  
  

  I rewrote for clarity and as a result of the FAQ post.
  

  
  

  Version of DB
  

  
  

  I use Oracle10g Enterprise 10.2.0.1.0 64-bit
  

  
  

  Tables involved
  

  CREATE TABLE wrhwr (
  wr_id INTEGER PRIMARY KEY,
  
  eq_id VARCHAR2(50) NULL,
  date_completed DATE NULL,
  status VARCHAR2(20) NOT NULL,
  pmp_id VARCHAR2(20) NOT NULL,
  description VARCHAR2(20) NULL);
  
  

  
  

  Examples of data

  
  

  INSERT into wrhwr  VALUES (1,'MI-EXT-0001',date'2013-07-16','Com','VER-EXC','Revisione')
  INSERT into wrhwr VALUES  (2,'MI-EXT-0001',date'2013-07-01','Com','VER-EXC','Verifica')
  INSERT into wrhwr  VALUES (3,'MI-EXT-0001',date'2013-06-15','Com','VER-EXC','Revisione')
  INSERT into wrhwr  VALUES (4,'MI-EXT-0001',date'2013-06-25','Com','VER-EXC','Verifica')
  INSERT into wrhwr  VALUES (5,'MI-EXT-0001',date'2013-04-14','Com','VER-EXC','Revisione')
  INSERT into wrhwr  VALUES (6,'MI-EXT-0001',date'2013-04-30','Com','VER-EXC','Verifica')
  INSERT into wrhwr  VALUES (7,'MI-EXT-0001',date'2013-03-14','Com','VER-EXC','Collaudo')
  
  

  
  

  Query used
  

  SELECT *
    FROM (SELECT eq_id,
                 date_completed,
                 RANK ()
                 OVER (PARTITION BY eq_id
                       ORDER BY date_completed DESC NULLS LAST)
                    rn
            FROM wrhwr
           WHERE     status != 'S'
                 AND pmp_id LIKE 'VER-EX%'
                 AND description LIKE '%Verifica%') table1,
         (SELECT eq_id,
                 date_completed,       
                 RANK ()
                 OVER (PARTITION BY eq_id
                       ORDER BY date_completed DESC NULLS LAST)
                    rn
            FROM wrhwr
           WHERE     status != 'S'
                 AND pmp_id LIKE 'VER-EX%'
                 AND description LIKE '%Revisione%') table2,
         (SELECT eq_id,
                 date_completed,            
                 RANK ()
                 OVER (PARTITION BY eq_id
                       ORDER BY date_completed DESC NULLS LAST)
                    rn
            FROM wrhwr
           WHERE     status != 'S'
                 AND pmp_id LIKE 'VER-EX%'
                 AND description LIKE '%Collaudo%') table3
   WHERE     table1.eq_id = table3.eq_id
         AND table2.eq_id = table3.eq_id
         AND table1.eq_id = table2.eq_id
  
  

  The above query is intended to selfjoin wrhwr table 3 times in order to have for each line:

  • eq_id;
  • date of the completion of a verification type work request for this eq_id (aka table1);
  • date completion of a line (aka table2) type wr for this eq_id;
  • date of completion of a type wr Collaudo (aka table3) for this eq_id;

  A separate eq_id:

  • can have different completion of many requests for work (wrhwr records) with dates or date of completion (date_completed NULL column).
  • in a date range can have all types of wrhwr ('verification', 'Line', 'Problem'), or some of them (e.g. audit, line but not Collaudo, Collaudo but not verification and line, etc.);
  • must not repeat the substrings in the description;
  • (eq_id, date_completed) are not unique but (eq_id, date_completed, description, pmp_id) must be unique;

  Expected results

  Using data from the example above, I expect this output:

  eq_id, table1.date_completed, table2.date_completed, table3.date_completed

  MI-ext-001,2013-07-01,2013-07-16,2013-03-14 <- to this eq_id table3 doesn't have 3 lines but only 1. I would like to repeat the value most in the rankings in table 3 for each line of output

  MI-ext-001,2013-07-01,2013-06-15,2013-03-14 <-I don't want this line of table1 and table2 with both 3 lines match must be in terms of grade (1st, 1st) (2nd, 2nd) (3rd, 3rd)

  MI-ext-001,2013-06-25,2013-06-15,2013-03-14 <-2nd table1 joined the 2nd row from table2

  MI-ext-001,2013-04-30,2013-04-14, 2013-03-14 <-1 table1, table2 rank rank 1, 1st rank table3

  In the syntax of vector style, tuple expected output should be:

  IX = ranking of the i - th of tableX

  (i1, i2, i3) IF EXISTS a rank i - th line in each table

  ON THE OTHER

  (i1, b, b)

  where b is the first available lower ranking of the table2, or NULL if there isn't any line of lower rank.

  Clues?

  With the query, I am unable to delete the lines "spurius.

  I think a solution based on analytical functions such as LAG() and LEAD(), using ROLLUP() or CUBE(), using nested queries, but I would find a solution elegant, simple, fast, and easy to maintain.
  

  
  

  Thank you
  

  Hello

  Sorry, it's still not quite clear what you are asking.

  This becomes the desired resutls of the sample data you posted:

  WITH got_r_type AS

  (

  SELECT eq_id, date_completed

  CASE

  Description WHEN LIKE '% Collaudo %' THEN 'C '.

  Description WHEN AS 'Line %' THEN 'R '.

  Description WHEN AS 'Verification %' THEN 'V '.

  END AS r_type

  OF wrhwr

  Situation WHERE! = s "

  AND pmp_id LIKE '% WORM - EX'

  )

  got_r_num AS

  (

  SELECT eq_id, date_completed, r_type

  , ROW_NUMBER () OVER (PARTITION BY eq_id, r_type)

  ORDER BY date_completed DESC NULLS LAST

  ) AS r_num

  OF got_r_type

  WHERE r_type IS NOT NULL

  )

  SELECT eq_id

  LAST_VALUE (MIN (CASE WHEN r_type THEN date_completed END = ' V')

  IGNORES NULL VALUES

  ) OVER (PARTITION BY eq_id

  ORDER BY r_num

  ) AS audit

  LAST_VALUE (MIN (CASE WHEN r_type = 'R' THEN date_completed END)

  IGNORES NULL VALUES

  ) OVER (PARTITION BY eq_id

  ORDER BY r_num

  ) AS line

  LAST_VALUE (MIN (CASE WHEN r_type = 'C' THEN date_completed END)

  IGNORES NULL VALUES

  ) OVER (PARTITION BY eq_id

  ORDER BY r_num

  ) AS collauda

  OF got_r_num

  GROUP BY eq_id

  r_num

  ORDER BY eq_id

  r_num

  ;

  I guess the description can have (at most) only substrings target, in other words, you can't have a line like this:

  INSERT into (1,'MI-EXT-0001',date'2013-07-16','Com','VER-EXC','Revisione VALUES wrhwr and audit");

  In addition, you said the combination (eq_id, date_comepleted) is not unique, that it is y no example of this in your sample data.  What results would you if, in addition to this line (who did the validation):

  INSERT into wrhwr VALUES (7,'MI-EXT-0001',date'2013-03-14','Com','VER-EXC','Collaudo');

  the following line is also?

  INSERT into wrhwr VALUES (97,'MI-EXT-0001',date'2013-03-14','Com','VER-EXCFUBAR','Collaudo');

  .

  You could do a self-join instead of GROUP BY, but I suspect it will be much less effective.  You can use FULL OUTER JOIN, since you do not know what r_types was that r_nums.

• Group records with time

  Hi all
  
  This is our requirement.
  
  We must combine records with time.
  
  for example: period = 3
  TABLE: XX_SALES
  ---------------------------------------------
  XDATE XQTY
  ---------------------------------------------
  10 5/1/2012
  20 2/5/2012
  3/5/2012 30
  4/5/2012 60
  12 2012/5/7
  8/5/2012 23
  45 8/5/2012
  100 12/5 / 2012
  5/2012/13 55
  5/2012/15 99
  
  == >
  ---------------------------------------------
  XDATE XQTY
  ---------------------------------------------
  1/5/2012 10-> 5/1/2012 Group (5/1/2012 ~ 3/5/2012)
  2/5/2012 20-> 5/1/2012 Group (5/1/2012 ~ 3/5/2012)
  3/5/2012 30-> 5/1/2012 Group (5/1/2012 ~ 3/5/2012)
  4/5/2012 60-> Group 5/2012/4 (4/5/2012 ~ 2012/5/6) *.
  7/5/2012 12-> Group 5/2012/7 (5/7/2012 ~ 9/5/2012) *.
  8/5/2012 23-> Group 5/2012/7 (5/7/2012 ~ 9/5/2012) *.
  8/5/2012 45-> Group 5/2012/7 (5/7/2012 ~ 9/5/2012) *.
  5/2012/12 100-> Group 5/12/2012 (2012/5/12 ~ 14/5/2012) *.
  13/5/2012 55-> Group 5/12/2012 (2012/5/12 ~ 14/5/2012) *.
  5/15/2012 99-> Group 5/15/2012 (15/5/2012 ~ 5/17/2012) *.
  
  After amount to combine with period = 3, the result will be
  ---------------------------------------------
  XDATE_G XQTY_G
  ---------------------------------------------
  60 1/5/2012
  4/5/2012 60
  2012/5/7 80
  12/5/2012 155
  5/2012/15 99
  
  
  Here's the example script

   
  create table XX_SALES(XDATE DATE, XQTY Number);
  insert into XX_SALES VALUES(to_date('20120501','YYYYMMDD'),10);
  insert into XX_SALES VALUES(to_date('20120502','YYYYMMDD'),20);
  insert into XX_SALES VALUES(to_date('20120503','YYYYMMDD'),30);
  insert into XX_SALES VALUES(to_date('20120504','YYYYMMDD'),60);
  insert into XX_SALES VALUES(to_date('20120507','YYYYMMDD'),12);
  insert into XX_SALES VALUES(to_date('20120508','YYYYMMDD'),23);
  insert into XX_SALES VALUES(to_date('20120508','YYYYMMDD'),45);
  insert into XX_SALES VALUES(to_date('20120512','YYYYMMDD'),100);
  insert into XX_SALES VALUES(to_date('20120513','YYYYMMDD'),55);
  insert into XX_SALES VALUES(to_date('20120515','YYYYMMDD'),99);
   

  We can solve this problem by using the loop now:
  to find the XDATE_G and it's rank in the loop and the XQTY in the range of the sum.
  

  DECLARE
    V_DATE_FROM DATE := NULL;
    V_DATE_TO   DATE := NULL;
    V_QTY_SUM   NUMBER := 0;
    CURSOR CUR_DATE IS
      SELECT DISTINCT XDATE FROM XX_SALES ORDER BY XDATE;
  BEGIN
    FOR REC IN CUR_DATE LOOP
      IF V_DATE_TO IS NULL OR REC.XDATE > V_DATE_TO THEN
        V_DATE_FROM := REC.XDATE;
        V_DATE_TO   := REC.XDATE + 3 - 1;
        SELECT SUM(XQTY)
          INTO V_QTY_SUM
          FROM XX_SALES
         WHERE XDATE >= V_DATE_FROM
           AND XDATE <= V_DATE_TO;
        DBMS_OUTPUT.PUT_LINE(TO_CHAR(V_DATE_FROM, 'YYYYMMDD') ||
                             '-----qty: ' || TO_CHAR(V_QTY_SUM));
      END IF;
    END LOOP;
  END;

  Is it possible to solve this problem by using analyze sql?
  
  
  Thanks in advance,
  Best regards
  Zhxiang
  
  Published by: zhxiangxie on April 26, 2012 14:41 fixed the grouping expected data

  There was an article about a similar problem in Oracle Magazine recently:

  http://www.Oracle.com/technetwork/issue-archive/2012/12-Mar/o22asktom-1518271.html

  See the section on the 'grouping beaches '. They needed a total cumulative who started once the total reaches a certain amount.

  You need a total cumulative which starts again when the date changes to group and the dates of beginning and end of each group must be determined dynamically.

  This can be done with the analytical functions.

  Here is a solution-based 'code listing 5', the solution MODEL, which is recommended in the article.

  SELECT FIRST_DATE, SUM(XQTY) SUM_XQTY FROM (
    SELECT * FROM xx_sales
    MODEL DIMENSION BY(ROW_NUMBER() OVER(ORDER BY XDATE) RN)
    MEASURES(XDATE, XDATE FIRST_DATE, XQTY)
    RULES(
      FIRST_DATE[RN > 1] =
        CASE WHEN XDATE[CV()] - FIRST_DATE[CV() - 1] >= 3
        THEN xdate[cv()]
        ELSE FIRST_DATE[CV() - 1]
        END
    )
  )
  GROUP BY first_date ORDER BY first_date;
  
  FIRST_DATE            SUM_XQTY
  --------------------- --------
  2012/05/01 00:00:00         60
  2012/05/04 00:00:00         60
  2012/05/07 00:00:00         80
  2012/05/12 00:00:00        155
  2012/05/15 00:00:00         99
  

  If you 9i, there is no function model. In this case, I can give you a solution using START WITH / CONNECT BY that does not work as well.

• HOW TO SET UP RECORDING WITH ADOBE CS5 IN WINDOWS7

  Hi all. I used to record with hearing and then make my own MP3 W XP compulations.

  Now, I have 7 W and new Audition CS5 and of course, can not save. When I press the record button, message here is that appears:

  the sampling rate of the output devices and audio do not match. audio cannot be recorded unti it's fixed.

  Use the control panel operating system or device appropriate to adjust the frequency of sampling of input and output devices to use the same settings.

  Also, just in case where, what else do I need to do in Windows 7 to allow the recording of the hearing of Winamp or any other music source?

  I looked at my audio devices in the Control Panel, I have S/PDIF sound card integrated into the motherboard.

  Thank you

  I think that what you describe is normal operation of the console reading in Windows 7, except that it is only sometimes the faders move together, rather than always.

  I also think that Emmrecs is right. Go Win7 Panel and select the "Recording" tab, then right-click on an empty space on the tab. You should look for what is called "Stereo Mix" or "what you hear".

  If you see that a listed Microphone and no option to activate disconnected or disabled devices, you will need to go get a third-party tool.

  As I say, I use Total Recorder. It has been around for years and works the way you want with earlier versions of the hearing. There are other applications that use others.

  All your problems are with Windows 7, I'm afraid.

• the use of collections, copy a record with children/grandchildren

  I understand that loops FOR cursor are not as good as the use of collections, and now I need to convert some of my code accordingly.
  I've been doing a bit of good to read the documentation and have not yet encountered examples of the situation that is so prolific in our system; namely, someone wants to make a copy of a record, with its outbuildings down a few levels.
  
  Here's what looks like a typical of this instance (except that everything is in packages). Take the 3 tables: grandparent_table, parent_table and child_table, with primary keys being gp_id, p_id and c_id respectively (and related as one might guess these names):
  
  create or replace procedure p_copy_record (p_gp_id in grandparent_table.gp_id%type)
  is
  cursor c_parent
  is
  Select *.
  from parent_table
  where gp_id = p_gp_id;
  
  v_gp_id grandparent_table.gp_id%type;
  v_parent_id parent_table.p_id%type;
  Start
  Select grandparent_seq.nextval
  in v_gp_id
  Double;
  
  insert into grandparent_table
  Select v_gp_id,
  other_columns_here
  of grandparent_table
  where gp_id = p_gp_id;
  
  for r_parent loop c_parent
  Select parent_seq.nextval
  in v_parent_id
  Double;
  
  insert into parent_table)
  P_ID,
  gp_id,
  other_columns_again)
  Select v_parent_id,
  v_gp_id,
  r_parent.other_columns_again;
  
  insert into child_table)
  C_ID,
  P_ID,
  other_columns3)
  Select child_seq.nextval,
  v_parent_id,
  other_columns3
  of child_table c,.
  where parent_id = r_parent.parent_id;
  end loop;
  end;
  /
  
  I tried to change the code of this a few different ways, but running into errors. The main problem seems to be that the collections don't refer to an element, in order to make this join (where parent_id = r_parent.parent_id).
  
  How you would replace the slider - for loops here (using 10 gr 2)?
  Thank you

  To replace the sliders, you will need to fill a table with the same data. Then process these tables

  create or replace procedure p_copy_record (p_gp_id in grandparent_table.gp_id%type)
  is
  type gp_array is table of grandparent_table % roytype;
  type p_array is the table of the parent_table % rowtype;

  l_gp gp_array;
  l_p p_array;

  v_gp_id grandparent_table.gp_id%type;
  v_parent_id parent_table.p_id%type;
  Start
  -get the next gp id
  Select grandparent_seq.nextval
  in v_gp_id
  Double;
  -bulk collect the current record of the gp - you don't really need but for pleasure it's im
  Select * bulk collect into l_gp from grandparent_table where gp_id = p_gp_id;
  -creation of a grandparent registration
  insert into grandparent_table
  values v_gp_id,
  .name l_gp (1),
  .other_columns_here l_gp (1);

  -Now bulk collect the parent records
  Select * bulk collect into l_p Parent_table where gp_id = l_gp (1) .gp_id;

  FOR i IN 1.NVL(l_p.COUNT,0) LOOP
  -get the next parent id
  Select parent_seq.nextval in the double v_parent_id;
  -create the parent record
  insert into parent_table)
  P_ID,
  gp_id,
  other_columns_again)
  v_parent_id,
  v_gp_id,
  LP (i) .other_columns_again;

  -While we are here create the records for this parent child
  insert into child_table)
  C_ID,
  P_ID,
  other_columns3)
  Select child_seq.nextval,
  v_parent_id,
  other_columns3
  of child_table c,.
  where parent_id = lp (i) .parent_id;
  END LOOP;
  END;

  To be honest, I'm not sure that you will really see a great improvement since you already limit the scope until the recording of one of the grandparents. Let's say the grandparent has 10 children each with 10 children who is just 111 records. As long as your tables are indexed by the node Id it should be fast just like that.

• Can Notes show the number of records with each folder?

  Can Notes show the number of records with each folder?

  No it can't. It would be nice tho.

• I want to record with &lt; alt &gt; &lt; s &gt; in the Exact program online. This function does not work. This is the first time I use this program with firefox.

  Question
  I want to record with < alt > < s > in the Exact program online. This function does not work. This is the first time I use this program with firefox.

  edit, escaped mod < s > in order to avoid the line through question

  A web page can be defined a "accesskey" for an item. Unlike IE/Chrome/Safari, who use the Alt key only, Firefox requires pressing Alt and Shift to activate the element. In other words, try

  ALT + SHIFT + S

  and see if it works.

  I don't know of any way to change this so that the change is not necessary. There may be an add-on?