problem running the usb modem

Similar Questions

• 3 laptops different ALL been facing intermittent problems with the USB ports.

  We have 3 laptops at home, running 3 different versions of winsows 7... Home, Professional and Ultimate. They have in recent months ALL given intermittent problems with the USB ports. A device that worked on a port stops working. It may or may not work on another port. A week later it could very well lead again on the port that wouldn't work. This applies to all types of devices.

  A few more questions:

  Is there a USB device that you use with all three computers?

  This problem occurs with all kinds of USB devices?

  The is the problem with all the USB ports on each laptop?

  Have you tried to reinstall the USB drivers? As in, uninstall via the Device Manager, restart your PC and allowing Windows to reinstall?

• Since 10.11 I have not been able to download via the usb port of my Davis Vantage weather station. No solution of tech Davis on the issue even with the new recorder of events in the resort. Is there a problem with the usb?

  Since 10.11 I have not been able to download via the usb port of my Davis Vantage weather station. No solution of tech Davis on the issue even with the new recorder of events in the resort. Is there a problem with the usb?

  What Mac? (details)

• HP r033tx: could not find the usb modem Setup

  Setup of the usb modem does not anywhere on my laptop r033tx,

  This usb device works properly with other laptops in the folder "my computer", it's to show as disk removal and after double-clicking on its projection 'Please insert a disc into this drive.

  It's also show "device and printer" in the control panel and its properties is tellieng 'thi peripheral works properly.

  So what I need to do to get this usb modem Setup

  Deveshh wrote:

  Setup of the usb modem does not anywhere on my laptop r033tx,

  This usb device works properly with other laptops in the folder "my computer", it's to show as disk removal and after double-clicking on its projection 'Please insert a disc into this drive.

  It's also show "device and printer" in the control panel and its properties is tellieng 'thi peripheral works properly.

  So what I need to do to get this usb modem Setup

  Also if there is no driver for your Win8 then you won't be able to use it. Also more recent laptops Win8 one is no longer a Modem port anymore. So unless your USB modem factory has Win8 drivers for this USB Modem, you won't be able to use it.

• The problem is the USB Devices folder shown as a shortcut so I can not Capy of data in the folder with other devices or hard drive.

  Original title: USB problem

  I use windows 7 as operating system. I have problem when I insert USB devices as pan tie drive, mobile, reader of cards ect. USB port of my PC. The problem is the USB Devices folder shown as a shortcut so I can not Capy of data in the folder with other devices or hard drive. so please suggest me what I can do?

  Hello

  Start Windows Explorer, and then see if there is a drive letter assigned for access to the
  drive. If this is not the case, check if the disc is shown in disk management.

  1. Open Computer Management by clicking on the button start , by clicking on Control Panel, system and security, clicking Administrative Tools and then double-click computer management. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  2. In the left pane, under storage, click Disk Management.

  If there has made a right click option - assign a drive letter for you can use Windows
  Explorer to copy files.

  I hope this helps.
  --------------------------------------------------------------------------------------------
  Rob Brown - Microsoft MVP<- profile="" -="" windows="" experience :="" bicycle="" -="" mark="" twain="" said="" it="">

• problem running the session of remote debugging for specific oracle sql developer

  I have a problem running the session of remote debugging of sql server specific oracle developer.
  I get the following error:
  Connection to the database mmgrep - INNA.
  PL/SQL execution: ALTER SESSION SET PLSQL_DEBUG = TRUE
  Running PL/SQL: CALL the DBMS_DEBUG_JDWP. CONNECT_TCP ('inna.followap.com', '4029')
  ORA-30683: failure connecting to debugger
  ORA-12535: TNS:operation expired
  ORA-06512: at "SYS." DBMS_DEBUG_JDWP', line 68
  ORA-06512: at line 1
  Process is complete.
  
  
  I understand that Oracle is unable to connect to my PC.
  I have 2 different oracle servers to work with the sql developer. With one I can run debugger, with another - the errow above.
  I need to change to be able to start debugging with second oracle server.

  In tools | Preferences | ebugger, you can specify a range of ports for the debugger to use so you can limit it to those that are open on the firewall.

  And just to check, is the ip address that is displayed in the CONNECT_TCP call the right one for your PC?

• Installation of the USB Modem problem

  I am trying to install a Telstra 4 G mobile USB modem on a Dell Ultrabook on Windows 7, keep this message ' VB Script run time for custom action ' won't complete installation

  Update your Windows and install the latest update.

  Visit the website of support if your modem and install the latest version of the driver.

  Contact the manufacturer support and discuss this matter with them.

• Problem with the software Modem on Satellite Pro L40

  I tried to set up a connection Dial-Up Networking on a Satellite Pro L40 running Vista and can't get the modem to talk to the modem from the ISP. The connection appears OK and then you can hear the modem dial, but when the ISP picks up there is a bit of yelling and then my modem abandons the connection and I get the standard vista connection failed box.

  Things I've tried:
  -latest drivers for the 2.1.77.0 modem (and the rest of the system) downloaded from Toshiba and installed OK
  -all the updates of windows installed
  -removal of the modem in the Manager of peripherals and re - install
  -suppression of the agrsmdel.exe and then re-install
  -try different cables to plug into the phone jack
  -several different ISPS and phone numbers
  -reduce the maximum speed of the connection
  -connection to the same ISP with my Satellite L10; works very well never have time!
  -using the windows to diagnose and repair the tool (set last resort!); says that the modem works fine and can not find a problem with the connection

  Is it possible that the update of the BIOS on the laptop would make a difference (currently v 1.60)? I did some research on Google and found messages on various forums, which suggests that the connection between the motherboard and the modem chip is a little doubtful for all the Agere Soft Modem; If the case is it something I can fix myself or I should go for warranty repair?

  Midders

  Hello

  I'm sure that there is no problem with your modem, but with the configuration or even s ISP modem. I recommend you to speak with the support of the ISP.

• Satellite M110: The USB Modem broadband wireless fails to install

  Hi all

  I have a satellite M110 machine under XP SP3.

  I've tried two different brands of wireless USB modems. The two installation the corectly modem drivers and Device Manager shows this. However, pilots of Port of Coms do not install. The installation wizard displays the message "driver did not install correctly, Access is denied."

  Modem providers cannot explain failure given that the modems will work on my desktop machine (vista) without any questions just plug-and-play so to speak.

  I tried-

  (1) disable all anitvirus programs and firewalls.
  (2) deactivation or deletion of all other modems and internet connections
  (3) update BIOS
  (4) restart completed after all the above steps
  (5) verified all the drivers are the latest and the greatest part up to date.

  Returning the status 'out of box' re-loading of windows is not an option I've run a number of programs on my machine that are no longer available in the format that I use in my business. A suggestion was made by a tech Windows registry values are incorrect and are blocking the installation?

  You said, that the Wireless USB modem works on your desktop with Vista. Modems supported by Windows XP or Windows XP SP3?
  I would like to do a downgrade to SP2.

  In addition, I think that the best way would be a reinstall of Windows. If it s not an option, try it on another HARD drive in the laptop.
  You don't, so no risk of losing your data.

• M277dw: Reset zero problem using the USB to M277dw

  Hello, I'm just trying to see if anyone else has had this problem. I use the laserprinter HP M277dw and use a current running nine Imac El captain. If I print anything on my printer and then decide to reboot my computer for some reason any, if I keep the USB cable connected to my computer that is connected to the printer, the computer hangs on reboot. It is the same on a full stop to the low and new start up as well. It's almost as if the printer is not disconnected somehow when I shut down or restart. The solution I found is to unplug the printer USB whenever I have to restart or shut down and then reconnect to the computer up and running again. My feeling is that this is related to the El captain, but I can't say for sure. Anyone else see this problem?

  Hi @andrewdawson11,

  Welcome to the Forums of HP Support! I see that you have problems, turn off the Mac, it crashes on restart when the printer is connected by a USB connection. I will definitely do my best to help you. If this helps you to find a solution, please click on the button "Accept as Solution" down below in this message. If you want to say thanks for my effort to help, click on the 'Thumbs Up' to give me a Kudos.

  Run Apple updates.

  You download and install the latest drivers for the printer? If the latest driver is not installed, which can cause this problem. Here is the link if you have not already: HP Easy Start.

  Make sure that the correct driver is added.

  Click on the Apple menu, click System Preferences. Click on Printers & Scanners, highlight the name of the printer on the left side and right side of the screen it should show the name of the printer. (Laserjet M277dw)

  If the full name of the printer is not correctly, delete and add the printer name back from the list. Click on the sign - to remove the driver and then click on the + sign to add the driver might have to drop-down list to select the name of the printer to add a click.

  

  

  If the problem persists, try the following:

  Fix permissions of the drive on the Mac:

  Close all applications.

  In the Apple menu, click OK, click Applications, and then click utilities.

  Double-click disk utility.

  Highlight your hard drive / partition on the left.

  Click on check and then repair disk permissions.

  Restart the computer...

  Reset the printing system:

  Note: This will remove all printers in the print and Fax/Scan, any printer deleted can be re-added later by clicking the sign plus (+) symbol.

  Click on the Apple icon and then click on System Preferences.

  Click on Printers & Scanners.

  Make a right click (or Ctrl + click) in the left white side panel, and then click Reset printing system.

  Click OK to confirm the reset.

  Type the name and the correct password.

  Click OK to reset the printing system.

  Then click on the sign to add the driver, highlight the printer +. (you may need to click the drop down menu to select the printer name) Then click the Add button.

  Test the printer and try to restart the Mac again.

  If there is anything else I can help you, let me know. Thank you.

• Only local access while using the USB modem

  Hi, I have a laptop dell inspiron with Vista home premium preinstalled in it. For about 3 years I use GPRS (internet) with modem USB on it without problem. It was working fine but application stopped working 15 days before. I tired every thing from different forums but the only "Local access" message is fix... now, after trying a lot of different things I get of the internet world for 5 minutes but it goes to new local only access. But within 5 minutes no Web site is too load. I have no problem with my connection to the LAN and wireless. They both work fine(I hv tested). Its only for my nokia usb modem. I HAV tried to use GPRS to different operators, but it is givin local only access for all, and when consulted internet in all mobile phones are workign fine.  I also tried to use microsoft fix but it gave an error file not found and ignored den and ran some checks of registrey and claimed restart. But no change in connectivity.
  Help, please.

  Hello

  ·          Update you the network card with the latest drivers?

  Method 1:

  I suggest that you disable Antivirus software and firewall temporarily on your computer and check if you are able to connect.

  Note: Please make sure that you enable the antivirus software and firewalls after the test to keep your computer protected.

  Method 2:

  You can try the manual steps suggested in the following article:

  http://support.Microsoft.com/kb/928233

  Note: serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: (http://windows.microsoft.com/en-US/windows-vista/Back-up-the-registry ) how to back up and restore the registry in Windows)

• Is it possible to use the USB modem on the Toshiba AT100 Tablet?

  Hi all!

  I just bought a Toshiba Tablet and I was wondering if it is possible that the Tablet could use a usb modem. My USB modem lights to say its connected but can not find where he recorded as an option.

  Concerning

  Pictonite,
  Tablet of Noob.

  Hello

  > that the Tablet could use a usb modem

  Found this info on some Android Web pages:

  + Unfortunately, you can t taken modem 3G into the USB there aren't currently has no drivers available. Maybe later on the track Google will add support for the mobile dongle in its Tablet OS, but for now, you got to jump on WiFi or a mobile wireless access point to get the online AT100 +

• Satellite Pro L10: USB on and goes off when I try to use the USB modem

  I have a mobile broadband usb t-mobile I want to use it on my Satellite Pro L10.
  When I attach to one of the usb ports then the laptop it is, but it loses then every 10-15 seconds (without interruption).

  I'm on XP Pro and usb Sockets work very well for a USB and a printer.
  I also tried to fix via a hub with external power usb and a pcmcia card with usb port, with exactly the same results.

  It works perfectly on my wifes laptop, it seems to be a conflict or a software problem.
  I flashed the bios and updated as well as seems relevant that I can.
  I continue updating the drivers etc, but in the meantime, I was wondering if anyone had any bright ideas?

  A healthy idea of mind is considered, it is starting to drive me up the wall! Mike

  Hey Buddy,

  T-mobile USB broadband have you? I mean if you could tell us what model you have maybe we can discuss it further. By the way: you said about your wife the USB - stick works machine. What operating system your computer laptop wife´s have?

  Would be interesting to know these facts; either by the way, I think it s more programs given that your material seems fine.

  Would appreciate feedback of your regarding your question.

  Greetings

• "Unknown device" USB Barcode scanner, problem with the USB controller driver?

  Hello

  I need assistance with our Barcode Scanners that doesn't work on our newly purchased computers at HP with Windows7 Pro x 64 operating systems.

  The brand and model of the bar code scanner is:

  Datalogic Heron D130 USB.

  When you connect the scanner to a USB port, Windows will try to install this as a HID, but it takes an unusually long time, about 7-8 seconds, to boot the device and install the drivers and appears as an unknown device in windows "devices and printers" and the hand scanner does not work.

  Sometimes when you move the USB back can I sometimes the scanner at hand to be recognized as an HID device or a Datalogic barcode scanner,

  It works fine until you restart the computer.

  After restart the computer cannot detect the scanner Barcode correctly without re - appears as unknown device.

  I suspect that there is a compatibility problem between barcode scanner and card USB controller on the computers.

  I tried to update all the drivers available on the website www.hp.com and same www.Intel.com (chipset drivers) but nothing has helped to solve this problem

  Tried newly bought barcode scanners and "used" barcode scanners earlier who works on other computers, but the problem remains.

  I found a workaround by connection of bar codes in a USB hub, and then plug the USB hub to the computer.  And leave the USB - hub to take care of the communication with the Barcode Scanner.

  in this case, it takes about 2 seconds for the code scanner barcode to mount correctly in windows under the heading "devices and printers" and then works perfectly, even after a reboot.

  I googled after a response after my problem, but it seems I'm the only one who experience this issue. ?!

  Bought more than 40 computers that I have this problem.

  These were bought at different times with two different for suppliers

  Computer model are the following

  HP ProDesk 1 400 P/N5S21EA

  Specifikations:

  http://WWW8.HP.com/emea_africa/en/products/desktops/product-detail.html?OID=6614160#! tab = specifications

  Does anyone have an idea what could be wrong and how to fix it?

  Thanks in advance

  Sincerely

  Robert T

  Hello

  The problem is not power - related.

  We use passive USB hubs that solves the problemon these computers.

  (it also works with the docks, or if you EliteDisplay E241 HP as we thers a usb hub 2 ports inbulit in monitor that works.)

  The problem lies in the incompatibility between the Intel USB controller and the hand scanner, can be connected to USB 3.0

  When you let another usb-controller support in handshakeing (such as a usb hub), it works.

  Datalogic or Intel would like to acknowledge this error.

  Because none of the big companies want to acknowledge the problem or repair, personally chose to switch to an AMD platform / CPU instead of the Intel and now it works fine!

  We get more performance for your money when AMD is usually less expensive to purchase.

  And because of the poor of Datalogic press where they don't even answer e-mail (their only channel for support)

  I chose to stop using their products. I'm going to use another provider / brand of barcodescanners.

• then I get the installation software for printer lexmark 5650 has failed the windows logo test, then @usb or ethernet point during installation it won't end up as I run the usb cable

  When you install the software for lexmark printer 5650 to test the logo point to install windows, then @usb or ethernet I can't complete install because it will not recognize the usb cable

  Hi Spudly49.

  Thanks for posting. You are using an OS 32-bit or 64-bit?

  If you use a 32 bit OS, please download and run the driver located here. http://support.Lexmark.com/index?page=content&ProductCode=LEXMARK_X5650&ACTP=product&ID=DR2226&segment=support&UserLocale=en_US&locale=en

  If you are using a 64 bit OS, please download and run the driver located here. http://support.Lexmark.com/index?page=content&ProductCode=LEXMARK_X5650&ACTP=product&ID=DR3915&segment=support&UserLocale=en_US&locale=en

  I hope this helps! Shawn - Support Engineer - MCP, MCDST
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think