Problem sending pictures through texting when the WIFI
I recently move carrier to Cricket wiresless (Yes uses AT & T network) of the Sprint. Since I made the change, I had problems sending pictures through texting when the WIFI. I contacted the Cricket Wireless support and they had me reset the APN settings, he has to work because I also disabled WIFI at the time. Since then, I realized that I don't have the problem, when I cut the WIFI.
Someone at - it similar problems?
I found the resolution on Adroid Central:
Wow! Presented this to the customer service email of Cricket and they responded in 12 minutes confirming:
Billy M. (Cricket Wireless)
16 Dec 08:46
Hi Evan,
Please contact the Support of Cricket. I'm sorry to hear about the problems you are having with your MMS then on the WiFi. Our team of network has been aware of this problem and is currently working on a resolution. In the meantime, you can use one of the IP addresses below in your MMS proxy under the APN settings that should solve the problem.
192.168.196.78
192.168.196.79
192.168.196.117
192.168.196.118
Thank you
Billy
Looks like the guys from reddit were correct and the IP addresses are legitimate.
Tags: Motorola Phones
Similar Questions
-
iOS 9.3.1 no longer send pictures through text messaging?
Just downloaded iOS 9.3.1 and now I can no longer send pictures through text messaging?
I can take a new picture and send it, but I can't choose library, take a picture, press the button CHOOSE, but no image send?
Anyone else having this problem?
You get an error message? You try to send photos through iMessage (blue) or MMS (green)? For iMessage, you must have a data of activation, either WiFi or cellular connection. For MMS, you must have an active cellular data connection. You have MMS enabled in settings > Messages?
-
Cannot send pictures through text after 9.2.1 update
I can't send pictures through text messages after I updated my phone with the 9.2.1 update last night. I can text, but when I try to attach the image it will allow me to pull up my photos, but once I select him then it just goes back to the text as if I had never chosen a photo. I tried with several different numbers to ensure that it was not an isolated incident and the problem is persistent. Help, please.
Is MMS messaging enabled in settings/Messages?
-
Since I updated my software to 9.3.1 I was not able to send pictures through e-mail
Here are the steps of troubleshooting for MMS:
- Make sure that you are connected to the Internet through cellular data or Wi-Fi.
- Go to settings > Messages. Check that the type of message you are trying to send is lit (iMessage, SMS, MMS or e-mail group)
- Restart your device.
- Looking for a carrier settings update.
- Looking for an updated software iOS.
If it still does not work, contact your carrier.
If you cannot send or receive messages on your iPhone, iPad or iPod touch - Apple Support
-
BlackBerry smartphones, send pictures via text
I tried to find a way to send pictures through text on my new blackberry curve, & I can't understand it. I don't know if this is not available, or I can't find it.
any help would be appreciated.
Thank you!
If you talk to send a picture to another phone, you can send MMS messages. SMS (text) messages do not support attachments and actually do only support sending a message one bit 1 120.
You must have MMS support from your provider to use. If you do not see an option to compose or send MMS messages, you probably need to order the service, how you would get the book of service [MMS].
-
page every time I try to download a free trial version for the sequels, I get to the legacy that when I click on free trial he always says we know the atm problem but its nothing to with the wifi is good, but its unique every time Please HELP
You MUST have a 64-bit computer and operating system... What is your computer?
-Programs are supposed TO not view or download if they are not installed on your computer
MINIMUM for After Effects and Premiere Pro http://helpx.adobe.com/premiere-pro/system-requirements.html
-
Tecra S11 - bluescreen when the WiFi switch is on
I've known several accidents suddenly blue screen, with apparently no advice. After several tests of different conditions I counted it takes place when the WiFi switch is on. So, it should be associated with Bluetooth or WiFi.
Any suggestions how to proceed further? apparently I have the latest drivers (Windows 7 64)
Thanks, GuidoHey Buddy,
Have you already checked the BIOS if you have installed the latest version? If this is not the case check this on the Web from Toshiba site and make an update of the BIOS. Maybe it helps
But I had a similar problem last year and the solution was exchanging the WLAN card.
I think your Tecra S11 should still be under warranty and in this case that the repair will be free. :)
-
original title: mail of the window
I am trying to send a photo attachment in the mail of the window, I have about 16 photos to send and this is the message I received in return.
Can someone tell me how to do it correctly.
Thank you
42117958, the message size exceeds the size limit
31457280 Server 63.127.11.31 [63.127.11.31]You try to send a 42 MB file, your server only allows you to send 31 megabytes and beneficiaries are limited to 10 megabytes. Try using Irfanview (www.irfanview.com - free) and you can resize them and save as jpg files and they will be 100 X smaller. Otherwise, send them 1 by 1.
To resize them you can specify an image to about 640 x 480 pixels (or the beach), and that will keep the size appropriate for the email.
Steve
-
I'm new to programming of the Structure of the event. I am trying a program which causes the content of a control to the string to be processed when the user presses the button back in after typing in the control of the chain. I think (I hope!) that it is simple, I just can't understand how do.
Basically, I would take the attached VI and change so that the user can send the value of control 'String In' to the indicator "String Out" either by pressing the 'Return' key or press the button 'send string. '
Any help would be greatly appreciated.
This example has nothing to do with the RETURN key specifically. It fires all simply whenever the value of the control is changed. If you click outside the text box or on another still controls the value changes and still the event is raised. This is often the desired so if it works in your application, you good to go.
You CAN ONLY answer a particular key if you wish. Set your event to meet 'This VI' > key down. Then, read the proposal Vcle on the left side of the structure of the event and compare it to the RETURN (for example). The Boolean result of the comparison gets connected to a structure to deal with your code to run inside. You can also wire Vcle directly to a case structure and execute different code based on which key was pressed last.
-
problems of text when the resize a button
I use one of the Flash built in buttons. Problem: when I lie down the wide button to resize it, the text gets stretched as well. When I enter the button to change the text in the text layer, all new type I is also tense. Is there a way to get around this?
Thanks for your help!
MichaelWell Yes. Who did. Thank you very much!
-
problem sending files for MacBook Air via WiFi analyzed
I have an Officejet Pro8600 Plus and the interface is via wifi for my MacBook Air. I am running OSX 10.9.1.
When the document or photo is scanned, it looks good in the HP control window. I can change the functions of the analysis. When I type sent by using the button on the HP screen, it sends only the left 1/2 of the scan, and it is amplified.
I tried all settings to save the document and the scanner. The only one who seems to be the computer's analysis of general use.
He did it since about September works.
I found another setting on my icon of the HP scan dock that works with fewer steps than the capture of scan/Image of Apple.
The parameter is called general purpose. It gives the same picture with all the editing options available before the analysis is sent to the computer. This little less practice with other presets are included but still retains my scan at least no.
-
ActionScript to load captions in the table to the dynamic text when the user clicks the thumb
I have this code under that I made using a tutorial... it loads txt file vars it splits then place in a table... once in a table he brings the photos from the table to create thumbnails and a larger image. My problem is that I have captions to go with it, and when I try to load captions nothing happens or can be seen to happen.
I don't know where I'm wrong because I have no output or compiled errorsvar locVar = new Array(); locVar = imgLoc.split(","); trace ( locVar ); var tmbVar = new Array(); tmbVar = tmbLoc.split(","); trace ( tmbVar ); var capVar = new Array(); capVar = imgCap.split(","); trace ( capVar ); var NPICS:Number = locVar.length; // number of pictures to load var PICX:Number = 32.8; // x loc of big picture var PICY:Number = 24.9; // y loc var THUMBHOLDERX:Number = 50; // x location of thumbnail holder movieclip var THUMBHOLDERY:Number = 457; // y location var THUMBW:Number = 100; // width of each thumbnail var THUMBH:Number = 75; // height var MARGIN:Number = 10; // margin between thumbnails var TOTALBYTES:Number = 212000; // approx sum of bytes in all jpgs (x 2) var MAXPIXELS:Number = 12; // max number of pixels to move slider per frame // mask definition; mask is assumed to cover some part of the thumbnail slider (here the numbers // were chosen so that there are margins between the mask and the right and left edges of the movie // (which is 420 x 290), and enough space above and below the thumbs to show them when they 'grow' // on mouseover var MASKX:Number = 0; // start x location of mask var MASKW:Number = 600; // mask width var MASKY:Number = 447.9; // start y location of mask var MASKH:Number = 92; // mask height var totalloaded:Number = 0; // running tally of bytes loaded from all pics // index into pictures array, used for loading var ipic:Number; // set up loader, an instance of MovieClipLoader var loader:MovieClipLoader = new MovieClipLoader(); // use the main timeline to listen to and respond to loader's broadcast events loader.addListener(this); // function to move thumbnail slider ("this" = thumbs_mc) function sliderControl() { var w:Number = this._width/2; var hw:Number = mask_mc._width/2; var npixels:Number; // only do when mouse over slider mask if (_ymouse > mask_mc._y && _ymouse < mask_mc._y + mask_mc._height) { // mouse over left half of slider: if (_xmouse > mask_mc._x && _xmouse < mask_mc._x + hw) { npixels = (hw - _xmouse) / hw * MAXPIXELS; this._x += npixels; if (this._x >= 0) this._x = this._x - w; // mouse over right half of slider: } else if (_xmouse > mask_mc._x + hw && _xmouse < mask_mc._x + mask_mc._width) { npixels = (_xmouse - hw) / hw * MAXPIXELS; this._x -= npixels; if (this._x <= -w) this._x = this._x + w; } } } // thumbnail click (onrelease) handler function openPic() { pic_mc.loadMovie(locVar[this.i]); } function brightON(){ this._alpha = 300; } function brightOFF(){ this._alpha = 30; } function captionTXT(){ _root.cap_txt = capVar; } // assign event handlers (called when all jpgs are loaded) function setupHandlers() { pct_txt.removeTextField(); // don't need loading indicator any more thumbs_mc.onEnterFrame = sliderControl; for (var i:Number = 0; i < NPICS*2; i++) { thumbs_mc["mc"+i].onRollOver = brightON; thumbs_mc["mc"+i].onRollOut = brightOFF; thumbs_mc["mc"+i].onMouseDown = captionTXT; thumbs_mc["mc"+i].onRelease = openPic; } } // listener function for broadcast 'done' message (for each pic) // onLoadInit gets executed when the movieclip has been loaded into _mc AND // its width and height data are available. // (_mc = the movieclip being loaded into) // this routine sets the size and position of each thumbnail clip as its jpg // is loaded and starts the next one loading. When all have been loaded, // a random picture is loaded into pic_mc and setupHandlers is called to // assign handlers to each thumbnail movieclip function onLoadInit(_mc:MovieClip) { // this gets done when the jpg is completely loaded: _mc._width = THUMBW; _mc._height = THUMBH; _mc._alpha = 30; // for image clarity // give the movieclip a property to remind it who it is // (used by openPic to know which big picture to open) _mc.i = (ipic >= NPICS ? ipic-NPICS : ipic); // add picture size to totalloaded variable totalloaded += loader.getProgress(_mc).bytesTotal; // now load the next one (if there are more) or set up handlers if done ipic++; if (ipic == NPICS * 2) { // start with a random photo displayed when all thumbs loaded pic_mc.loadMovie(locVar[Math.floor(Math.random()*NPICS)]); setupHandlers(); } else if (ipic >= NPICS) { // load jpg into duplicate thumbnail (will already be cached) loader.loadClip(tmbVar[ipic-NPICS], thumbs_mc["mc"+ipic]); } else { // load jpg into thumbnail loader.loadClip(tmbVar[ipic], thumbs_mc["mc"+ipic]); } } // listener function to handle broadcast progress messages // make pct_txt show cumulative loading progress function onLoadProgress(_mc:MovieClip, loaded:Number) { var loadedsofar:Number = totalloaded + loaded; pct_txt.text = Math.floor(loadedsofar / TOTALBYTES * 100) + "%"; } function init() { // create holder for pictures createEmptyMovieClip("pic_mc", 1); pic_mc._x = PICX; pic_mc._y = PICY; // create (and draw) holder for thumbnails createEmptyMovieClip("thumbs_mc", 2); thumbs_mc.beginFill(0, 100); // black thumbs_mc.moveTo(0, 0); thumbs_mc.lineTo(2 * (MARGIN + THUMBW) * NPICS, 0); thumbs_mc.lineTo(2 * (MARGIN + THUMBW) * NPICS, THUMBH); thumbs_mc.lineTo(0, THUMBH); thumbs_mc.endFill(); // drawing the thumb holder at 0, 0 and then moving it makes its reg point = upper left thumbs_mc._x = THUMBHOLDERX; thumbs_mc._y = THUMBHOLDERY; // create, draw and enable mask over thumbs (could use different variables to define mask // if desired) createEmptyMovieClip("mask_mc", 3); mask_mc.beginFill(0x0000cc, 100); mask_mc.moveTo(0, 0); mask_mc.lineTo(MASKW, 0); mask_mc.lineTo(MASKW, MASKH); mask_mc.lineTo(0, MASKH); mask_mc.endFill(); mask_mc._x = MASKX; mask_mc._y = MASKY; thumbs_mc.setMask(mask_mc); // create loading textfield indicator createTextField("pct_txt", 4, 200, 100, 40, 100); var tf:TextFormat = new TextFormat(); tf.align = "center"; tf.size = 12; tf.font = "Verdana"; tf.color = 0xFFFF00; pct_txt.setNewTextFormat(tf); // create loading textfield indicator createTextField("cap_txt", 0, 400, 200, 40, 100); var cf:TextFormat = new TextFormat(); cf.align = "center"; cf.size = 12; cf.font = "Verdana"; cf.color = 0xFFFF00; cap_txt.setNewTextFormat(cf); // make empty movieclips in thumbs_mc for each pic to go into // make double the number so the slider can move continuously and show content for (var i:Number = 0; i < NPICS * 2; i++) { var mc:MovieClip = thumbs_mc.createEmptyMovieClip("mc"+i, i+1); mc._x = i*(MARGIN + THUMBW); mc._y = 0; } // set the pointer to the first jpg in the array picnames ipic = 0; // start loading jpgs (ipic is initialized to 0) loader.loadClip(locVar[ipic], thumbs_mc["mc"+ipic]); } init(); stop();
If you search the MovieClip.createTextField method in the Flash help documents, it will show you how to assign a textfield to a movieclip.
-
Tecra S11 - 11G - external monitor flickers when the Wifi is enabled
I have a similar problem on my brand new Tecra S11 - 11G. The only difference is that the problem is present only when I have my laptop plugged in and turned on WiFi radio.
If I turn the Wifi radio off and keep the laptop connected to the power source, the external screen keeps flickering. If I keep the WiFi radio and disconnect it from the power source blinking stops, too.
I reported this problem to Toshiba customer to the Portugal (where I bought it) and they gave me the ticket case #710008193. They said that they would not replace the defective unit and that I should leave for repair. It is absolutely amazing because the laptop is brand new. A customer still expects to have a well work product when needed out of the box without having to call the repair man. I think it is their obligation to replace the damaged aircraft. In addition, this laptop is part of a fleet of the company who buys only Toshiba laptops and we are talking about a Tecra and not a Satellite. We deserve more respect from Toshiba.
In a year or two, I have a new laptop (company policy) and it surely won't be a Toshiba.
> They said they would not replace the defective unit and that I should leave for repair. It is absolutely amazing because the laptop is brand new
That is why amazing? A hardware malfunction can still happen and this happens not only in the world of the computer/laptop. Therefore, manufacturers provide a service to a client and failure may be fixed and covered by the warranty.
> A customer still waiting to have a well work product when needed out of the box without having to call the repair man. I think it is their obligation to replace the damaged aircraft
Of course you are right, but in the reality of things happening.
My PS3 died after a short period of time. It has been fixed and replaced under warranty conditions, but this isn't a reason for me to say; I would not buy PS3 more because of this problem.
My BMW had some engine problems, that it was fixed under warranty and I would buy this car again once because this car is great and I think other builders are no better, and I think this would also happen to other manufacturersThat s my personal opinion in the opinion
Greetings
-
TabbedPane - sending of property value when the new tab is selected
Hi just designed tutorial, I have two tabs: vegetables and fruits.
The two tabs will use the same qml file (inside is a unique list) but of course will use different DataModel.
So, I set up a property for the DataModel source and place it when the current tab changes,
Here's my simplified code:
//main.qml TabbedPane{ Tab{ title: "Veggie" MyNextPage{} } Tab{ title: "Fruit" MyNextPage{} } //Looks like here's the problem onActiveTabChanged:{ var page = myComponentDefinition.createObject(); if(activeTab.title == "Veggie") page.dataModelSource = "models/veggie.xml"; else{ page.dataModelSource = "models/fruit.xml"; } } attachedObjects: [ ComponentDefinition { id: myComponentDefinition source: "MyNextPage.qml" } ] }
//MyNextPage.qml Page{ property alias dataModelSource: myListView.dataModel.source Content{ ListView{ id: myListView layout: ... dataModel: XmlDataModel{ source: "models/veggie.xml" } } } }
But he blocks my request. I don't know about works like that of property. Anyway the solution or alternative to send a value to another page?
Thanks before
It's easier if you do not attach the page, as follows:
//MyNextPage.qml Page{ property alias dataSource: dataModel.source Content{ ListView{ id: myListView layout: ... dataModel: XmlDataModel{ id : dataModel //source: "models/veggie.xml" } } } }
and then in your tabbedpane
TabbedPane{ Tab{ title: "Veggie" MyNextPage{ dataSource : "models/veggie.xml"; } } Tab{ title: "Fruit" MyNextPage{ dataSource : "models/fruit.xml"; } } }
-
Problem sending pictures in e-mail.
I get a lot of emails with pictures in it, when I want to transfer on I am told that one or more of the images can be transmitted and gives me the opportunity to not send. I showed me an e-mail that I sent in these circumstances, the images have been replaced by light gray blocks.
This happens if the original e-mail sent pictures which have been incorporated in a particular way. Your best bet is to save the photos, then attach them to a new email.
Maybe you are looking for
-
With Firefox sync now cell phones and my office agree, have no need of Xmarks?
I just answered a popup of Xmarks by inviting me to revive my installation of Xmarks. I thought I had removed Xmarks already, because I used your option of synchronization with happiness. But being in doubt, let him go ahead with the installation. So
-
What exactly is the difference between these options? I did some tests but am not 100% sure. Currently I guess extensions.update.enabled just looking for new versions of addons, but it does not install them while extensions.update.autoUpdateDefault i
-
How do I know if my Time Capsule causing my intermittent internet service or if it is my ISP?
-
Upgrade of the old security after El Capitan logs
Hey! A couple of days, I did an upgrade to Yosemite to El Capitan. When troubleshooting a problem with my backup software (3rd party), I realized that all my system connects (system.log) date of the day I did my upgrade to El Capitan, but not before.
-
How to insert an image in Wordpad?
Anyone have any suggestions on how to insert an image in Wordpad? Thanks in advance for your suggestions