Problem setting Deskjet 460WBT Bluetooth using Windows 7

Similar Questions

• Still problems with the adapter Bluetooth Toshiba Windows 7

  Hey there, it's me again.

  I am referring to my 'Problem Bluetooth on Windows 7' subject:

  I thought after the solution of bluecat that my problem has been resolved. But it isn't really.

  After you install the Windows fix, it worked just a short time. But now the problem is the same.

  When I remove the Toshiba Bluetooth Stack and try to work with Manager Bluetooth of Windows, I see that the Bluetooth icon is to come and one to go on the taskbar. In Device Manager, I said Windows, that it is not closed the device to save power. But I think that the device is on and walk and stop...

  I really absolutely have no idea what is the problem, but I get terribly angry.

  Details:
  Windows 7
  Dell Wireless Bluetooth internal adapter 350 (but it is manufactured by Toshiba)
  Experienced pilots: Vista Pack of profile of the Dell homepage (no battery installed, driver only) / Toshiba Bluetooth Stack (the latest version)

  This is the old thread:

  Hi all

  Just as I installed Windows 7, my keyboard and Bluetooth mouse do not work very well.

  I use the Dell Wireless 350 Bluetooth internal adapter, Toshiba Bluetooth Stack 8.00.02 and the keyboard and mouse Logitech MX1000.

  To connect the devices on my computer, I first have to disconnect the Bluetooth adapter by pressing Fn + F2 on my Dell i9400, after re-login I can search and connect devices correctly. They work fine as long as the laptop is running.

  After restarting the laptop, devices no longer work. They are still in the known, but not connected Bluetooth stack. That's why I have to unplug the adapter Bluetooth, another time and reconnect in order to connect the two devices.

  I first thought, it's a Windows problem. I thought that Windows is able to ask the adapter to save power. But when I go to Device Manager, there is no box for this option, as known from other devices (Te USB Ports). If this isn't the problem. I think the problem is something else, maybe performed by the Bluetooth stack.

  Windows XP it worked perfectly. I used the same hardware and also the battery Bluetooth Toshiba (uploaded on the homepage of Dell).

  Someone at - it ideas?

  Thank you!

  Daevu

  Hey there

  Yesterday I did Format C: and installed Windows 7 news.

  I do not have a bluetooth driver for my Dell Wireless 350 Bluetooth adapt (made by Toshiba).

  And now: the mouse and the keyboard work. I even do not see anywhere in my system, but they work.

  There is no bluetooth adapter in my device manager and I had do not connect the keyboard and mouse with my computer. She simply do nothing.

  I do not understand this...

  What is a backup connection?

  What I tried:
  -> Installation more recent Bluetooth Stack from Toshiba. Problem in the above message. I also installed the MS Hotfix. The same problem.

  -> Installed "Vista profile Pack" on the home page of Dell, recommended for my laptop and Windows Vista. There is no battery installed. So I had to connect the mouse and keyboard via the Windows Bluetooth Manager. But the adapter was performed on and off windows, the icon in the task bar came and went and came and went. Connection is good, 1 minute then a few seconds. Not possible to work with the mouse.

  And now, without having to install a driver, it works. Am I stupid?

  Daevu

• Problems with DeskJet 460 (WiFi) and Windows 7 (x 64)

  I was able to configure my DeskJet 460 with my laptop running Windows 7 64 bit, but I encountered some problems:

  Of course, there is no Windows 7 HP Toolbox, so I went in the printer properties in hopes of using the printer services tab to align the print heads after installing new cartridges, but while the printer services tab is there, there is no button or anything at all.  So, how to align the print heads?

  The other issue has to do with the evolution of my printer WiFi card so that I can put its IP address manually.  Usually, I could do that through box HP Toolbox, but since my upgrade to Vista x 64, this isn't an option.  Is there another way to get around this?  I don't know, but I recall being able to use my browser and simply type the IP address of the printer as I can with my C7180 but it did not work, even if the Wireless Setup page gave me the IP address.

  I did a test print to a Microsoft Word 2007 document and then perfectly printed text, the URL listed in the document did not print.  For comparison, I printed the same document using the C7180, and there is no problem.

  And finally, the center of HP solutions don't list not the DeskJet 460, only the C7180; is there a reason for this?

  Any help/comments are appreciated!

  _______________________________________

  The PDADoc!

  I can answer one of your questions - why Solution Center does not DeskJet460?

  Because this DeskJet does not complete solution support, the 'hooks' solution for the 460 Center are not created.  HP develops special software for each printer have the Solution Center feature.

• How to send a picture by Bluetooth using Windows 8-way

  I selected a photo via pictures tile, drag the right side and choose 'Sharing', I can't find the option to use bluetooth to send the photo to my friend who has the phone bluetooth...

  Note that I added my friend bluetooth device in the "Device" option to the forehand bar already...

  The current workaround is to use the old and no Windows 8 path via Office send the image via bluetooth... But this only defeated the purpose of showing what the new concept in tiles/Start of Windows 8...

  No idea how?

  Thank you!

  It is ACTUALLY how this in Windows 8... no idea what the other poster was thinking, but in most cases, there are a few thing missing in step by step preceding... as moving to the left does not bring to the top of the search appsicon.

  In any case.

  1. Add your BT device through Control Panel-> devices menu and make sure it is coupled.  THIS MUST BE MADE BEFOREHAND.

  2. in the window of your desktop, click on the Bluetooth icon in the notification area (you may need to press the icon of development according to the system icons How are present).

  3. Select "send a file".

  4. Select the device you want to send to, and then click Next. (this is why it needs to be paired FIRST, mentioned in step 1).

  5. you now need to select the window or files.  Locate the file you want to send; Click Open, and then click Next.

  6. If your device is not set to always allow, you will need to accept/approve receive the file on your device.

  7. click on finish once the shipment is completed.

• DeskJet 3050 610 using Windows 8

  I recently bought a new PC that runs windows 8 and am trying to use my printer / scanner. The printer works fine, but the control scanner does not appear in the software, if I press the button 'Scan' on the said machine it is scanning but eventually comes up with a "Time Out Activate Scan the computer again".

  If I go into the control panel I can right click on the unit, which allows me to select "scan" and it works.

  Can someone tell me how to recover all features please?

  I does not solve the problem. For the 5th time to try the software fully installed correctly, so it is now fully functional.

  Thank you

• Problem with burning a DVD using Windows DVD Maker

  Im trying to burn a DVD and I've imported all the files I want to burn but when I click on burn says DVD burner not found - make sure your DVD burner is connected and installed and try again.

  I've only used the week last to burn a DVD!
  Anyone got any ideas?
  See you soon.

  Im trying to burn a DVD and I've imported all the files I want to burn but when I click on burn says DVD burner not found - make sure your DVD burner is connected and installed and try again.

  I've only used the week last to burn a DVD!

  Anyone got any ideas?

  See you soon.

  =================================
  Can be hardware problems, but maybe the following
  the article would be worth a visit:

  (314060) your CD or DVD drive is missing
  or is not recognized by Windows or other programs
  http://support.Microsoft.com/kb/314060/en-us
  John Inzer - MS - MVP - digital media experience

• Problem setting deskjet 3050 610 a for wireless printing

  Hello.

  Try to put in place a deskjet 3050 610 a in a wireless network. Printer works fine when connected to USB, but it fails with "Error_000057" when trying to print wireless.

  Router is a BT Home hub 2

  With the help of an acer laptop runing windows 7 32 bit, connected wireless to the router (and online)

  Printer is connected to the network, blue light turned on, the IP address displayed

  Have tried to disable the firewall (AVG)

  Tried to reinstall software

  Using the latest version (DJ3050_610_231) of the driver from the HP website

  Any ideas, anyone?

  Thanks in advance.

  Print a network from the front of the printer test.  If it is connected to your router?

  If so, your AVG is probably the issue.  Download and run this utility: http://h20180.www2.hp.com/apps/Nav?h_pagetype=s-926&h_lang=en&h_client=s-h-e17-1&h_keyword=dg-NDU&jumpid=ex_r4155/en/hho/ipg/forum/network_diag/

  What did he say?

• can I set benchmarks when you use Windows Live Movie Maker?

  Between mic input and my sound card got cracked or damaged somehow through much use over 3 years ago. I have a Compaq C700CTO w. prcessors (Pentium) of intel 2 x 1.73 GHz, 2 GB of RAM. The card is a Conexant High Definition SmartAudio 221. I applied a touch of glue to audio for headphones/output to stabilize because I use constantly for recording sound and it worked fine. Due to the problem with the audio/mic input (the microphone gives a record crackling whenever the amplitude is close to max), I am recording the sound of my videos with a Sandisk mp3 player and I want to sync the audio with the video file. Adobe Audition allows me to edit the audio to make it to the starting point after that I cut the sounds of preparation, but I can't figure out how to set a landmark in Live Movie Maker program without calling the start or endpoint. Is there another way to set a landmark in Live Movie Maker? I can probably use hearing to edit video too but have not always taken the habit to use it for something other than the audio editing and mixing if registered clips separately. Thank you from any point of view on Movie Maker.       DL

  You cannot set benchmarks in WLMM.

  Audition is an audio editing application, so won't edit video.

  If you use a Clap to give you a strong a few applause you will find it easy to synchronize the separate audio and video using this noise, then cut an equal amount to get rid of it in your final cut.

• Problem setting Legacy DAQ board using NOR-DAQ 6.1 for Labview

  I know that the Board of Directors is an old legacy product not supported by NEITHER, however for a low-budget project, I have 3 of these AT-MIO-16 x cards and the need to use them.

  I know I got this job in the past not distant os, however, for the life of me can't get things sorted and work.

  You use a NT box, in which this configuration used to work... uninstalled and started fees for other reasons, and I can not get the NOR-DAQ 6.1 to support LAbview 6.1 or 7.1.

  Of course, I understand the OR-DAQ 6.1 should be used for Labview 5 and older, but also know this has been successfully done in the past.

  I downloaded all knowledge base articles dozed or both support and remember to use successfully the last time that I set up so I know not somehow it works.

  My configuration is: AT-MIO-16 X to the bus combo board (called work)

  NT PC

  LabVIEW 6.1 or 7.1

  NOR-DAQ 6.1 is the most recent to support this card.

  However, it will not install its support to its latest versions of Labview and I get errors, crashing, or missing files, when I followed various circumvention of knowledge base solutions.

  I was hoping that someone has a documentation somewhere how to handle this, because it really is a matrix of spaghetti.

  I can get NOR-DAQ support files installed, and Configuration Manager works well, finds the map and allows its parameters to be defined.

  But when I load the DAQ vi of any type, Labview accidents and the wizard of data acquisition channel does not work at all (no error).

  Thank you

  Yes, the installation program from the folder of disks for NOR-DAQ 6.1 on the ftp site has worked well.

  Workaround. Thank you

• Scanner not working not not on hp deskjet 3056A. Using Windows Vista.

  I just installed a HP Desket 3056 A printer and the scanner does not work. All I get is a page full of multicolored lines. My computer is a Del Inspiron 1525 Windows Vista.

  Called HP they send me a new printer. Thank you for your help

• Hotmail page is too small to see, I don't have this problem on another site (I use Windows 7), please can someone help?

  "Signature" page is ok, but the Inbox etc is too smal for see and I would change it.

  Thanks a lot to v!

• I'm trying to set up my system Windows 7 Ultimate 64 - bit up to use Windows XP mode.

  original title: XP Mode? HOW?

  I'm trying to set up my system using Windows XP mode 7 Ultimate 64-bit.
  I thought that since it was announced box WE the Win7software it would be IN the software! ... Funny that...
  But it's not. So, I go to the page to DOWNLOAD the software.
  I'm greeted by a series of necessary downloads until I can run XP mode.
  I've read all 3 steps of the instructions and felt they were simple enough to not have to print.
  Then I hit the 'step 2 - download windows XP mode' I'm greeted by a validation required DOWNLOAD.
  Ok no problem. My windows 7 is bought in-store (newegg). No pirated software IN my house much less ON my computer. It IS the only authentic.
  So I DOWNLOAD the program validation and the race (install?) it.
  I saw nothing happen after I ran (installed)? He had no visual feedback that he had done a thing.
  So I thought that maybe it runs automatically, so I tried to hit the button "step 3 - virtual pc DOWNLOAD.
  Yet ONCE I am greeted with the same 'Windows required vaidation' pop up.
  ...' excuse me? I thought I had already jumped by THAT hoop...
  Then I hit the button "step 4".
  I try to run the stand-alone program but get a "update is not applicable to your computer" popup.

  I'm sure that my computer can run programs.
  The construction is as follows:

  INTEL - PROCESSOR | CORE I7 2600K 3.4 G 8 M Ram

  Motherboard - GIGABYTE | GA-Z68XP-UD4 Z68 R

  RAM - 16 Gb G.SKILL F3-12800

  Primary HD - CRUCIAL 256 G (SSD) (operating system is installed on this drive)

  Hard drive - Western Digital 500 G

  Video cards - 2 x EVGA GTX580 3 G of Ram

  Sound card - HT | OMEGA | CLARO + R

  Cooling of the processor - ANTEC | KUHLER H2O

  DVD players - 2 x burners Lite on Blue Ray

  Power - COOLER MASTER 1000w

  OS - MS WIN 7 ULTIMATE FULL

  Please... PLEASE tell me how to get this software and run it.
  I have loads of programs that need it.

  BTW - this should be a real HOOT when I set up on my brothers computer. I built it in my house and it doesn't even have an internet connection instead.

  First of all, make sure that your installation of Windows 7 Ultimate already activated:

  Activate Windows 7 on this computer:
  http://Windows.Microsoft.com/en-us/Windows7/activate-Windows-7-on-this-computer

  If you use another browser other than Internet Explorer to post, try rather IE. You should also try to temporarily disable your Windows Firewall, it is known to cause some problems with validation.

  How to install:

  Make sure you download both Windows XP Mode and Windows Virtual PC (download this first and install first).

  After installation of Windows Virtual PC, click Start, type: enable or disable windows features

  Hi enter on your keyboard

  Scroll down and make sure that Windows Virtual PC is checked

  Click OK

  Reboot if prompted

  -------------

  Proceed with the installation of Windows XP Mode.

  ------------

  http://www.notebooks.com/2009/11/23/using-Windows-Virtual-PC-with-Windows-XP-mode/

  ------------

  Windows XP Mode and Windows Virtual PC

  http://www.Microsoft.com/Windows/Virtual-PC/default.aspx

  Windows XP Mode now accessible to more than PC

  http://windowsteamblog.com/Windows/archive/b/Windows7/archive/2010/03/18/Windows-XP-mode-now-accessible-to-more-PCs.aspx

  Get started with Windows Virtual PC

  http://www.Microsoft.com/Windows/Virtual-PC/get-started.aspx

• using windows 10 action dialog box does not appear when you try to perfoerm image adjustment

  When I select the picture setting and, for example, the levels, the dialogue window does not appear. Clicking any where just beeps and I have to press ESC to go back. Never had this problem before. Although I use Windows 10 I have everything worked out before. I uninstalled photoshop 7 and reinstalled but still the same. Someone at - it ideas

  Ok! Be all of Photoshop and tools preferences settings.

  1.) closing down Photoshop

  2.) use your shortcut on the desktop to launch Photoshop IMMEDIATELY press on & press and hold Shift + Ctrl + Alt or shift + CMD + OPTION before Photoshop Splash screens.

  3.), you will see a pop-up dialog box "Delete the Adobe Photoshop settings file?". Click YES.

  4.) open Photoshop when right clicking on the tool in the Tools option bar and then click «Reset all tools»

  5.), you will see a dialog box pop up "resets all the tools to the default settings?". Click YES.

  6.) closing down Photoshop

  7.) hold down a shift key and use your desktop shortcut to launch Photoshop.

  8.), you will see a dialog box pop up "Skip optional loading and third party plug-ins?". Click YES.

  9.) use Ctrl + N to open a new document in Photoshop default format.

  10.) use Ctrl + L, you should get a pop-up dialog levels

  

• Unable to print PDFs using Windows 8

  Using a new HP printer wireless without any problem to the impression of ordinary things, electronic letters, etc.  However, if I have to open an attached PDF file and try to print using ctrl + P, I get a message: "this application cannot send to other devices right now."

  Called instead that I bought the computer and the guy said that he there some problems with printing PDF files using Windows 8 and I maybe need to download a program, but really couldn't help me.

  He recommended I goggle search for the problem, but made me nowhere.  Can you help me?

  E-mail address is removed from the privacy *.

  Hi, I had the same problems with windows 8 and found this page

  http://www.win8pdf.com/PDF-to-printer.html

  I downloaded it. He asked me if I wanted a shortcut created on my desktop, so I clicked Yes, then once the download is finished I clicked on the shortcut and m, opened the program, I then open the pdf file from the program, and then click on print. Then, she let me choose my printer and print the PDF for me.

  I hope this helps.

  See you soon

• experienced problems for a HP Deskjet 1000 c printer to print using windows 7 64 bit

  One known problems get a HP Deskjet 1000 c to print using windows 7 64 bit. I have updated the drivers for parallel port and a printer. the computer recognizes the printer is there, but no documents will print.

  HP provides the drivers or software for this printer.

  It uses the built-in drivers obtained through windows update

  http://h10025.www1.HP.com/ewfrf/WC/document?docname=c03460648&CC=UK&DLC=en&LC=en&os=4131&Product=61601&sw_lang=

  If your PC does not have a PARALLEL port and you use a converter, this method is often problomatic

  If your PC has a parallel port, then the motherboard must be of an age that is probably not entirely compatible, not with orders other bottlenecks card mother win7