Problem setting Legacy DAQ board using NOR-DAQ 6.1 for Labview

Similar Questions

• Problem setting Deskjet 460WBT Bluetooth using Windows 7

  I used a small travel-friendly in recent years Deskjet 460WBT printer now, together with my Dell laptop, connected via Bluetooth.  No problems.  Now, I have replaced the Dell XP OS with Windows 7 and downloaded the new Windows 7 drivers for the Deskjet printer.  However, the Dell laptop can't see the Deskjet bluetooth signal.  I tried using online HP support tech, but in vain. Same thing with Dell.  There is no specific indications of HP on the net for Bluetooth Configuration with Windows 7 on this printer, only for XP.  Also, I can print with it using a USB connection.  Someone has an idea how to re - install this feature for Bluetooth?  Thank you.

  JJ

  Message edited by jacjon on 02/11/2009 23:22

  Hello

  I have a printer HP "Officejet H470" similar, and I could easily put place and feel to it, using BlueTooth on my laptop with Windows 7.

  I'll share what I did with you and perhaps you might be able to get installed so yours

  1. Ensure printing is on and wireless turned on, press, i.e. the (if necessary) USB dongle is attached to the side of the printer on the USB slot.
  2. On your laptop, Windows7, Goto "Start", then to the "devices and Printers" (you may need to control panel to find it).
  3. Select "add a printer".
  4. In the "Add a printer" dialog, select "add a network, wireless or Bluetooth printer.".
     • Windows displays "searching for available printers...' and should eventually find your device and display it in the list (may take a minute or two)."
     • Windows will automatically install the drivers and display a dialog box "Install drivers" in the taskbar.
  1. Finally, you will get the "You have managed to add HP Officejet H470 BT" (or similar).
  2. Click on ' Next... and when you are prompted to 'Share' Select NO if no, of course, and then click 'Next' again.
  3. A second dialog box "You managed to add HP Officejet H470 BT" must be posted... as well as the ability to "Print a test page": try it.
  4. Click Finish.

  This should be it!

  Yet once again, it worked for my H470... and perhaps differ slightly from yours... Also note that, since we are installing directly through Windows7, it uses the latest drivers available from Windows Update.

  I hope this helps!

  On paper.

• Problems saving a DAQ task, in Labview and besides running

  I'm trying to use DAQmx Save Task.vi in LabView to save a generation of simple signal task, so I can open it later / elsewhere. However, the problem I have is when I try to open the task in MAX. The task is presented in MAX, but when I try to run the task 200552 it occurs to the DAQ Assistant.

  200552 error has occurred in the DAQ Assistant

  Possible reasons:

  Specified string is not valid, because it contains an invalid character.

  Invalid character position: 4
  Invalid string: Dev1/port0/$line0

  It seems that the problem has to do with the character ' / ', but I don't know how to create a line of output in LabView that does not include the character ' / '. Is it all the same around this problem in either LabView or Max?

  I have attached my LabView program. Thank you for your help and your patience.

  OK, I understand now.

  Wire something for the "assign name. It chokes on it.

• scaling problems with the DAQ hardware help

  I am a new user and I'm trying to do a simple scaling of my entries of tension using the DAQ help. For example: a channel entered around 8V on a 0 to 10V input selection. I'm trying to resize it (linear) to show me around 28V using y = mx + b formula. My value of m is 3.2 and b 0. What DAQ Assistant bed is close to 16V instead of 25V (3.2 * 8). I custom make several scales, basically multiplying the entry of 2, 3, 4, 5, & but none exits causes what I expected according to the formula, and even the 5 x the value decrease. If I go to "not to scale", I read 8V, which is what actually happens in the 6255 map. Any thoughts?

  Hello DB66.

  Remember that the scope of the input Signal must be defined scale post. How do you set as your input signal range, you're reading may be scaling themselves within the reach of the input signal. A value of coefficient of 3.2, the stove must be Max = 32 Min =-32, since your device probably has a +/-10V range.

  Hope that helps.

• Difference between DAQ and DAQmx for acquisition of data PCI 6534

  Hello

  I use the PCI DAQ 6534 card for my digital I/o transfer. I am beginner in the labview.

  I want to store the data coming in memory and the reading of the data at the level of the trigger.

  I have seen the examples in the labview. Some have used DAQmx and DAQmx read write that screws and some have used the confg DIO port and all...

  So I want to know the difference between these two. For my application that I use?

  Hey Bo,

  First of all, I would recommend that you discover the NI 6533/6534 for NOR-DAQmx help. You may be able to find some of your answers in this help document. Now for what you try to do in your application, it looks like you are only buying data. If this is the case, with the 6534, the device acquires data in memory shipped as soon as the DAQmx series start task VI, as long as you don't start hardware triggers have in place. If you have a trigger of starting material, then will make the purchase of the aircraft after the DAQmx start task VI and only after you receive this material trigger. If you call not the DAQmx Read VI, then the data will be stored in the memory board for you, as the driver manages this data in the on-board memory storage, until reading DAQmx VI is called, which at that time, data is transferred to the Board of Directors in the memory of the computer. Once you get it in the computer's memory, you can do whatever you want with these data, as this graph or treat. If you look at the sample programs (which have been mentioned on how to find those in a previous post), you can find an example that little shows you how it works. One of the examples that you can check is called reading Dig Port-Ext Clk.VI. In this example, it sets up to read a finite number of samples and then starts the task. If you set a breakpoint on the line of the error after the VI begin, the data will be acquired in the amount of on-board memory. Then when you cancel the break of the VI, data will be extracted from the amount memory embedded in the memory system with the reading VI DAQmx. Again, the pilot takes care to put the data in the memory board for you once you start the task.

  I hope this helps. Please let us know if you have any questions or concerns about this issue. Also, certainly, discover and try to run all the programs related to the 6534 examples so that you can learn how the equipment works and how to use features to do what you want your program to do. Also, be sure to read through the help on the 6534, as well as the help of VI documentation to learn what makes each function. Thank you and have a nice day.

  Kind regards

  DJ L.

• Problem Set - up blackBerry Smartphones Email

  Hey guys,.

  I'm having a problem setting up my accounts e-mail and access to internet on my 8830 Verizon Wireless.  Sorry I'm kinda a n00b this is my first blackberry.  Thus, everytime I try to put something it says I have to create a blackberry account which is fine and dandy, but it won't let me because it says that my PIN is already activated, now I buy this phone.  How can I do accept my new account and letme registry?

  I will also upgrade the operating system on it (even if my thinkpad comes to die what numbers) which version of desktop software works best?

  Good so I called Verizon and they were confused at first but after being on the phone for a while with a very useful technology, they understood him out and set up my email for me.  It turns out that I have to use the user name that is already registered on the phone, so the guy that I bought username.  They wiped out its old email (I hope, you just don't lose all your emails wherever you are) accounts and set mine to and let me change the password.  Everything works now, just waiting to get my thinkpad broke stupid of the STI in order to update and sync with my outlook calendar.

• How to set up a connection using a Toshiba Satellite C655D-S5508 mobile access point?

  How to set up a connection using a Toshiba Satellite C655D-S5508 mobile access point? I am trying to connect a Samsung Galaxy stellar and receive an error page indicating that the DNS search failed. I do not know how to set up my computer, I have the wireless power and know how to connect to the hotspot from the phone. The phone is able to recognize the computer and its IP address, and the computer recognizes the phone and tries to connect but then displays the error message "DNS search failed.

  Any help would be great!
  Raquel

  Hi Raquel,.

  Do you have any security program installed on the computer?

  I suggest to go through the steps from the link provided and check if it helps.

  Add a Bluetooth device or other wireless or network device: frequently asked questions

  http://Windows.Microsoft.com/is-is/Windows7/add-a-Bluetooth-or-other-wireless-or-network-device-frequently-asked-questions

  You can also consult the manual of the computer for the same and check.

  If the problem persists, you can also contact manufacturing for known problems:

  Support.Toshiba.com

  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

  Hope this helps and let us know if you need more assistance.

• Problem with lines in Illustrator using the Wacom Tablet

  Hi all

  I have no idea why I'm having this problem in Illustrator. I use the small Intuos Pen Tablet (CTL-480), and my lines in illustrator is really strange. Even when I turn off the pressure in the brush settings, there is a gap in the line (it takes just one line of the same thickness). The Tablet works perfectly in Photoshop, but because I use the tablet to create art using plates (typography), it is easier and better for me to use illustrator. You are not sure that someone else had a similar problem or know maybe a setting I could change or try to fix it?

  I have attached a picture of the problem.

  

  

  Thank you for your help.

  This is a known issue.

  If all you want is a line single width, do not use brushes. Use the pencil tool and a simple blow

  If you apply a calligraphy brush, apply the effect zig - zag to it with a value of 0, then a setting of about 100 (turn on the preview to adjust)

• When I have videos on my calendar, they do not play in the screen of the monitor. I hear the audio but can't see the image. To test if my new files are somehow the problem, I went back and used video files that I have used successfully a year ago and th

  When I have videos on my calendar, they do not play in the screen of the monitor. I hear the audio but can't see the image. To test if my new files are somehow the problem, I went back and used video files that I have used successfully a year ago, and they no longer play in the monitor window. I hear the sound track, but don't see any video. Have I changed it some setting that controls video playback in the monitor window?

  Randy Ruttger

  Thanks for the follow-up.

  Missing in this equation are the Premiere Elements version you were using and the operating system on which it is running. But...

  The Act is accomplished. But... Up to now, and after that you went ahead and moved to version 12, we now learn what Premiere Elements version you were using. We don't yet know the operating system involved.

  You said first Elements 10. First 10 Elements is affected by a problem serious display known if the computer uses an NVIDIA GeForce video/graphics card card. In this issue, the only cure is to roll back the version of the driver about may 2013. The description of the problem and how to make the rear roller are described in one of the messages at the top of this forum. What video/graphics card your computer use?

  On another front, Adobe will release a new version of Premiere Elements any day now. Not one, but Adobe knows the function defined for the new version. This type of information is announced at the time of the release of the new version.

  So the solution to the problem you presented in this thread could have been...

  1 roll back the version of the NVIDIA GeForce driver for all may 2013 if possible (Windows 8 or 8.1 64 bit, maybe not possible)

  2. move to a different version of Premiere Elements (which you did)

  I offer the foregoing for consideration so that you can review your decisions. We are pleased to learn that the first items 12/12.1 works for you.

  Please do not hesitate to ask questions and seek clarification, but do not forget that the answers are in the details.

  Best wishes

  RTA

• Problem setting transition duration first pro cs4. Is this a bug?

  Hello world

  I have made a project of first pro cs4 and I'm having problems setting the duration of transitions between clips. I have my default transion set to cross dissolve them and 15 frames in length. When I try to lengthen, it seems that first makes two transitions in instead of a longer one. So, if for example I got a clip with a dip to black when I extend more than 15 default images to say 30 images I get two separate transitions one after the other instead of a long. I know it's difficult to understand so I downloaded the video on youtube. If fast forward you to the minute 01:20, you will see the latest bland given away with a dip to black transition and the you'll be right flash a bit after the last light disappears. I hope someone can help me solve this problem, as I'm completaly lost. Thank you :-)

  Work waaay too hard at this, dude.  Just use the default chained.  It gives you good fade to the top using all 24 images, no adjustment necessary.

• anyone having problem with export to Quicktime using H.264 in PE4

  Everytime I try to export a project 720 x 640 or 1280 x 720 P4E uses Quicktime container with H.264 compression, my system hangs somewhere in the conversion process.  Everyone knows about this problem?  Can I export using the iphone preset on H.264, but I can't export 720 p with this preset AFAIK.

  I think also, I would like to be able to export to Flash Video files using H.264 but PE4 limit myself to spark Sorensen or On2 VP6.  PE7 allows to FLV to perform using H.264 compression?  Am I missing something here?

  Thank you!

  Jeremy

  First is that you have updated your Quicktime? Rather than export via Quicktime why doesn't not export directly to the H.264 format? Using the export MPEG option, select a preset H.264 and go to advanced and set the size of the image in 1280 x 720.

  Export so not help Flash not a lot here, I'm afraid.

• I had a problem with slow, so I used "reset". The popup ran forever so I stopped it. Now I can not remove or add the program.

  I had a problem with slow, so I used "reset". The popup ran forever so I stopped it. Now I can not use, remove or add the program. How should I proceed?

  TIA,
  BWSwede

  Try to create a new profile.

  See "create a profile":

  • https://support.Mozilla.org/KB/Profile-Manager-create-and-remove-Firefox-profiles
  • http://KB.mozillazine.org/Standard_diagnostic_-_Firefox#Profile_issues

  If the new profile works then you can transfer files from a profile in the new profile, but make sure not to copy corrupted files.

  • http://KB.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox
  • https://support.Mozilla.org/KB/recovering+important+data+from+an+old+profile

  What problems do you have that you want to reset Firefox?

  Firefox creates a new folder of old data of Firefox on the desktop?

  If reset you Firefox and a new profile is created and some of your data (bookmarks, passwords, cookies, form data) is automatically imported and your current profile will be moved on the desktop (old data of Firefox).

• How can I turn OFF any possibility of use of private browsing OR - how to set a password to use the private browsing?

  How can I turn OFF any possibility of use of private browsing OR - how to set a password to use the private browsing?
  My children are free to use the internet - but I don't want them to be able to hide their internet activity to me.
  Thank you.

  Try this new extension - turn off private browsing:
  
  https://addons.Mozilla.org/en-us/Firefox/addon/disable-private-browsing/

  Ignore the review I did there on the 22nd, as both versions again, improving have been released during the 6 days and most of the articles I've written about have been fixed.

  Richie just needs to get to the function disable compensation no browsing history, who works at.

• Whenever I type the letter between f and h (he can't come in here or the problem occurs, so I will use 'p' instead), the locking of the keyboard and an informal search screen is displayed in the toolbar. Also happeninp in emails and 'my documents' but no

  I can't use a certain letter on my keyboard when in Firefox, email or my documents without the Freezin' screen and a pop up appears in my toolbar for a brousin site. The character I can not type is the letter between f and h in the alphabet. I have no problem with this letter in other applications, so I know that's not the keyboard. How to make and use this letter?

  This has happened

  Don't know how many times

  Is a week by o

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of your modules is causing your problem (switch to the DEFAULT theme: Tools > Modules > themes).
  See the extensions, themes and problems of hardware acceleration to resolve common troubleshooting Firefox problems and troubleshooting questions with plugins like Flash or Java to solve common Firefox problems

  If this does not work in safe mode and then disable all your extensions and then try to find out who is causing by allowing both the problem reappears.
  You can use 'Disable all add-ons' on the start safe mode window.
  You will need to close and restart Firefox after each change through "file > exit" (on Mac: "Firefox > Quit")

• How can I create a Windows using NOR-DAQmx application in Visual Studio 2010 64-bit

  Hello

  How can I create a Windows using NOR-DAQmx application in Visual Studio 2010 64-bit?

  I'm transferring a 32-bit application on 64-bit.  In visual Studio, I added the 64-bit project configuration.  He compiled the source very well but the reports link errors:

  error LNK2019: unresolved external symbol DAQmxReadAnalogF64 referenced in function NI6008_AnalogInput NI_6281\NI6281.obj
  error LNK2019: unresolved external symbol DAQmxCreateAIVoltageChan referenced in function NI6008_AnalogInput NI_6281\NI6281.obj
  error LNK2019: unresolved external symbol DAQmxReadDigitalLines referenced in function NI6008_DigitalInput NI_6281\NI6281.obj
  error LNK2019: unresolved external symbol DAQmxCreateDIChan referenced in function NI6008_DigitalInput NI_6281\NI6281.obj
  error LNK2019: unresolved external symbol DAQmxWriteDigitalLines referenced in function NI6008_DigitalOutput NI_6281\NI6281.obj
  error LNK2019: unresolved external symbol DAQmxCreateDOChan referenced in function NI6008_DigitalOutput NI_6281\NI6281.obj

  These, of course, are the functions OR that I use.  The NIDAQmx.lib has been added to the Input of the link property.

  Any help would be appreciated.

  Thank you

  -Neil shore

  Hi LaserShore,

  Think you that you added the 64-bit platform settings target according to this page? : http://zone.ni.com/reference/en-XX/help/372636F-01/mstudiowebhelp/html/64bitcore/

  Already running 32-bit application? Have you changed references to the 64-bit version?

  You use Measurement Studio? If so some features are not supported with 64 bit.

  Also when you say that you have added the NIDAQmx.lib, did you follow this KB:http://digital.ni.com/public.nsf/allkb/38F67B28D995C6958625706E000C580C